Great loss when Apple introduced MacBook and MacBook pro...
Since I carry my notebook with me everywhere i go, I'd like my notebook to be ultrasmall and ultra portable. Therefore I love my iBook 12'' and if you could buy a 10'' model, I'd do that.
Anyway, Feeling a need for more computing power, I thought it was time to get rid og my old iBook G4 and buy a new notebook but oh boy how i was wrong.
I entered the online Apple Store only to find out that the smallest model has a 13'' display. The iBook's 12'' were allready a bit to much, so therefore I cry out the following:
Dear Apple corp!!! Please launch a 12'' model or even better a 10'' model of the new MacBook/MacBookPro
I don't think there's that much market for a 10" monitor. At that rate, you might as well get a Palm or Pocket PC
I think one of the major issues with that is making the keyboard much smaller. Many laptop keyboards (but not apple) have small keyboards, some make the period key half the size, and it really makes it difficult to type. I'd expect apple to keep the screen size to the minimum size that it would take for a full sized keyboard... 12" like the 12" powerbook.
Upgrade to a 12" powerbook, I'm sure you could get one cheap now
Similar Messages
-
When is apple discontinuing MacBook Pro 2013 13 inch?
When will apple discontinue MacBook Pro 13 inch, 2013? They have already goo ten rid of the 15 inch.
You mean the non-Retina models... and no one knows when or if the 13" non-Retina will be discontinued. It's a bit long in the tooth, first being introduced in June of 2012. So it probably won't survive the 'next' round of new machines - but no one really knows!
I really don't want a completely closed machine, personally, and if you don't either I would grab the 13" while it's still available.
Clinton -
apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?
No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan -
When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?
Could the disk have failed?
Can you hear it?
Boot from the install DVD and see what Disk Utility says. -
When waking my macbook pro it sometimes takes 3 opening and closings to wake up
when waking my macbook pro it sometimes takes 3 opening and closings to wake up. Why?
I get something like this:
1/19/14 7:26:22.557 PM configd[18]: DHCP en0: RENEW/REBIND transmit failed
1/19/14 7:27:27.155 PM configd[18]: network changed: DNS* Proxy
1/19/14 7:27:27.161 PM configd[18]: network changed: v4(en0!:192.168.25.113) DNS+ Proxy+ SMB
That failed message recurs in Console while my MBP cannot connect to my wifi. The "network changed" messages correspond to the point when my MBP does finally connect.
Here's another piece. I have Windows 8.1 installed through Boot Camp. When I run Windows, I get no wifi problems. I don't know how much that helps, but it's a piece of info! -
Xerox 8560DN pauses when printing from MacBook Pro (Maverick update)
Xerox 8560DN pauses when printing from MacBook Pro using the printer connected to a Windows XP machine. The printer is fully shared, however when I print, it goes to PAUSE. It displays...Ready to print > Printing > and it pauses.
The Maverick update has changed lots of unecessary setups. What was perfectly working before, not it causes problems.
Any solution?Carolyn Samit,
I did it several times without any success. I think that the Maverick update damaged something.
I also deleted, added and change all settings... Not working. Xerox does not have a Maverick driver available, but today apple released a Xerox printer software update (Version 2.3). After the installation, nothing changed. -
When will the macbook pro be in canadian stores
I am looking to get the Macbook Pro, but I really want to know if anyone has a specific date when it will be available to buy in Canadian stores.
No one here would know - we're users just like you. We'll know when new MacBook Pros are coming out when Apple announces them and we'll know when Mavericks is coming out when Apple announces its availability.
That's all anyone can say at this point.
Clinton -
Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep? Regardless of whether I am using iMessage from my iPhone or iPad, when I open my MBP, I get attacked by Messages notifications for iMessages I've obviously already seen or responded to. Is there a way to change this? Are others having this issue?
Additionally, previous iMessages sent or received from those devices sometimes don't populate into the Messages window on the MBP. I haven't been able to identify when or what causes this; sometimes it just doesn't seem to work (and I verified that the messages sent/received were, in fact, iMessages and not SMS).
Thanks - any help or insight would be appreciated!First you need to determine what laptop model you have; then we can help you. A Mac Book Pro cannot run OS 9.1.
With your Mac booted up, click on the at the far left of the menu. Then click on About This Mac. It will show what version of OS you are running. What is the version?
A MBP will be running something like version 10.x.
If you are running version OS 9.x, you don't have a Mac Book Pro.
Cheers, Tom -
Can I use Final Cut Studio 3 - notably FCP 7 - on the lastest MacBook Pro (non Retina) (Z0MV-27-4GB-512-HRA Apple 15" MacBook Pro/2.7GHz Quadcore Intel Core i7/8 GB) running OS 10.8? If not, is there a work-around if I have to revisit work done in FCS 3?
I have it running on the latest NON-Retina MBP. And a good friend of mine has it running on his Retina model. Works fine.
Henry English wrote:
What if I have to revisit any one of them? What if I try FCP X and find I prefer FCS 3?
If you need to revisit them...that's why you install FCS3. That's really the only reason I have that on my system, to revisit old projects, and to deal with clients who still use FCP 7.
You really should look at moving on though...not sticking with FCP7. It's 4 years old...two years since it was EOL. Adobe Premiere Pro CC is a very good FCP replacement...although I don't like their "rental" method of paying a subscription to use it. Or you can buy Adobe CS6...but that just lacks enough to make it not quite tempting for me. Premiere CC is spot on...but **** if I don't hate that subscription model. But there's also Avid Media Composer. But that doesn't do a lot of things that I used FCP and Adobe for... -
Deleting folder in Microsoft Word for Apple on Macbook Pro
I would like to delete a folder in Microsoft Word for Apple on Macbook Pro and I cannot work out how to do it. Any help would be appreciated.
Thanksanna.maria wrote:
Any help would be appreciated.
<http://www.apple.com/support/mac101/> -
Does anybody know when the 2012 MacBook pro will be released?
Does anybody know when the 2012 MacBook pro will be released?
If there is one it would be in 2012.
-
Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?
Hi leahmturner,
I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/en-us/HT201343
Optimizing image quality
Resolution matching modes
You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
Match Desktop Size To: Apple TV
AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
Match Desktop Size To: This Mac
AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
Troubleshooting AirPlay Mirroring
If you don't see mirroring options
If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
If the menu bar or Dock is cropped
Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping. If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
Minimize video post-processing
HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
Firewall security settings
If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
Choose System Preferences from the Apple menu ().
Click Security & Privacy, then click Firewall.
Click the lock icon to unlock it if it's locked, then type an administrator name and password.
Click Firewall Options.
Deselect (uncheck) the “Block all incoming connections” checkbox.
Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Apple replaced the logic board, wiped the computer, did a fresh instal of the OS, and also a fresh instal of all the programs during the beginning of 2015. The GeekBench scores are the highest of any of the similar computers (at least on the day of my testing). But here's what's happening. The Macbook Pro Retina has a GeForce GT 650m with Cuda Technology and it can't handle editing in Premiere Pro with Cuda Acceleration turned on. Open CL, a second form of graphic acceleration on the Macbook Pro, appears to be functioning properly.
At the Apple Store on 1-10-2015, I was told that since the logic board and the graphic cards have been replaced that there is nothing they can do and they recommend contacting Corporate. This comes after they told me to buy a new logic board and that that would solve the problem. This comes after Apple did not listen, for over a month, about the possibility that they didn't properly build a professional notebook computer.
The computer displays a black program monitor screen, at random times, when the user edits footage with Cuda Acceleration enabled. It used to lead to an entire system crash and/or a Premiere Pro crash before the operating system was completely re-installed. My solution, since I bought the computer, was to edit in Open CL... However, I've come to learn that there is a major difference in performance between Open CL and Cuda Acceleration.
For the Macbook Pro Retina, Adobe Media Encoder render times are about 20% faster with Cuda Acceleration than Open CL. The 2013 Macbook Pro Retina appears to be able to handle Cuda Acceleration in Media Encoder, but I have had a number of issues leading to program crashes on every project before the new logic board and operating system were installed. For over a year and a half, I actually never used Cuda Acceleration. Having sent every crash report and user data to Apple over that time, I truly expected an update of some sorts and it never came.
FYI: The latest Macbook Pro Retina uses the GeForce GT 750m... This is essentially the same graphic card that performs about 10 - 20% faster due to a new "boost mode." More importantly, it actually has the exact same number of Cuda cores. Having the same number of Cuda Cores means that the Cuda Acceleration is essentially the same when exporting or viewing video. To prove a point to Apple that their 2013 Macbook Pro Retina isn't functioning properly, I bought the latest computer with the 2.5 i7, 16gb Ram, 512gb SSD and I can honestly say that the 2014 model works perfectly fine with Cuda Acceleration turned on while editing in Premiere. I can also say that a proper render test proved the 2013 and 2014 model to be the exact same.
I'm new to this whole pay $2700 for a computer that your manufacturer didn't / can't test properly, so I will be contacting Apple and speaking with Senior Advisors, their Customer Support division, and will soon speak with their Corporate branch. I'm confident that the Early 2013 Macbook Pro Retina with a 2.7 i7 16gb Ram and a 512 SSD is nearly the same at rendering video and editing video, provided the Cuda Acceleration works, as their latest 2014 Macbook Pro Retina with the 2.5 i7 processor 16gb Ram, and a 512 SSD. It's truly a great computer and a great build, minus their current inability to properly test / diagnose their computer.
Knowing that the latest graphic card in the Macbook Pro lineup is essentially the same model, I feel that Apple is not directly looking into the viability and life span of their current Macbook Pro Retina product line. They can't test for performance issues relating to their graphic cards, so why consider buying from them when the end user is actually in a position to experience up to a 20% decrease in certain professional programs.
For future reference, I'd strongly urge other individuals to avoid purchasing Apple products if they offer Cuda Technology. In my opinion, Apple is an Open CL organization, at best, who is not responsibly manufacturing / producing computers that fit their organization's strengths. For a fact, they can't test their Cuda Technology and won't even attempt to address Cuda Acceleration errors for Apple owners (01-11-2015). I say this having walked out of the Apple Store on 1-10-2015 with virtually no support other than to contact Corporate.Looks like a RAM issue.
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000 -
My external monitor flickers intermittently and wont function when connected to macbook pro
Hello everyone,
I recently purchased a cable to convert the thunderbolt/miniport to the VGA input on an external monitor I have had laying around for a few years. I am currently running osx 10.7.5 on a macbook pro.
When I plugged the cable to connect my macbook to the monitor, the monitor certainly recognized the cable, but the display would not do more than flicker in and out intermittently when connected to my macbook.
I have searched the forums for a solution to this, but haven't been able to find one that works. I tried resetting the SMC and restarting while holding cmd+P+R but none of these "fixes" seemed to help.Simplest thing to try is a PRAM reset.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from http://support.apple.com/kb/ht1379 -
When i am starting the macbook pro, the screen was flashing black and white, and then to color to color, and the whole process repeat all over again, is there any suggestion in solving this, or is there no way to solve this and i need to bring it to the apple support?
My computer Spec:
Macbook pro Version 2011Sounds as if you're having a problem with your GPU (graphics card). Only Apple can diagnose and fix this, so the best thing would be to take your machine into your local Apple Store or an AASP.
Clinton
Maybe you are looking for
-
DVI-to-VGA adapter disabled on HDMI-equipped monitors?
Can anyone with an Apple DVI-to-VGA adapter on a Core Duo or Core 2 Duo (both at 10.6.8, currently and probably forever) still connect to a second monitor if the monitor also has an HDMI port? I could until early 2011. From 2008 to 2010 I could conne
-
Error : Posting with trans.type 200 not possible (No acquisition posted)
Dear All, Iam getting error while doing asset retirement thru ABAVN. Error is mentioned below. Pls do the needful. Posting with trans.type 200 not possible (No acquisition posted) Message no. AA324
-
Licensing on Mac laptop and PC desktop
Hello, I have the CS6 Masters Collection for Mac and was wondering if it's possible to somehow use the same license in order to install it on my new PC desktop.
-
Error when open My Apps in Nokia 206
Nokia 206 s40 phone
-
How do you organize bookmarks so all the folders are listed at the top of the list?
When I click on bookmarks, the folders are scattered among the uncategorized bookmarks that I have added. This makes it harder to sort through. I want all of the folders to stay in alphabetical order at the top of the list, and the individual website