Great plug, but I need a tighter workflow, any ideas?
Hi,
just got the schOPE plug from www.stillwellaudio.com and a few others (btw, check them all out, they are amazing!).
But I need a tighter workflow for multi-monitoring, any ideas?
More explanation here;
www.stillwellaudio.com/forums/viewtopic.php?f=19&t=270
Every creative idea is appreciated!
Just in case this is relevant..
If you'd want to have Schope monitor four discrete mono sources in Logic Studio, this is one way:
If your four sources are on channels 1-4, you pan them e.g. hard L, hard R, hard L, hard R. Then you route channels 1+2 to bus 1, and channels 3+4 to bus 2. Select Schope as plug-in on bus 1, and bus 2 (way down at the bottom of my list) as sidechain.
Similar Messages
-
My iPhone 5S says it's disabled and to connect to iTunes, iTunes says it needs 4 digit pass code. I tried to restore it but device wasn't recognised. Any ideas? I only got it yesterday.
How did the passcode get on the phone to begin with, if you "only got it yesterday"? Regardless, to remove it, you'll have to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
This will remove the passcode. -
Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?
P.s. it is now going to apple logo on white screen then switches off
-
Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?
- Have you tried when connected to other networks? Maybe the router is blocking the ports used by Safari and the other apps.
- What kind of network are you using? a personel or bussines? -
I can no longer create new folders on my desktop. The option to do that is now light gray on the drop down menu and can't be selected.
I cannot drag new items onto desktop any longer either.
The Desktop in Finder opens with Terminal.
Folders and items on Desktop open and work normally.
Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas.
Thank you.Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign (“$”). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.) -
I have recently upgraded my iPhone 4 to OS 4.2.9. After plugging in headphones, I can't get the speakers to work. I have read a few articles online that suggest inserting and removing the headphone plug into the jack, but this hasn't worked. Any ideas?
Just read another article that suggested blowing compressed air in the port. After trying this, the speakers were working again.
-
When I tried to open itunes I was informed files were missing and I needed to reinstal . I have attempted to do this but keep getting fault messages. Any idea's please
C:\Users\paphos203\Downloads\iTunesSetup(2).exe.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator.
C:\Users\paphos203\Downloads\iTunesSetup(4).exe.part could not be saved, because an unknown error occurred.
Try saving to a different location -
Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.
Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay -
My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!
Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this. -
I've swapped to i5c (great phone) so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..
Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear. -
HELP! I had iPhoto on my mac, for some reason it was not responding or damaged. down loaded a new version but can't find my photos. any ideas please. I thought once on the mac always on the mac.
Sorry but we need details to help
What version of the OS do you have? What has changed since iPhtoo worked?
What exactly is the problem - you say "it was not responding" - You downloaded a new version (what version)" -you can't find yoru photos" none of which is helpful
look in your applications folder - is there an Iphoto application there? If so get info and report the version
Look in the picures folder - is there an iPhoto library there? If so exactly (including exact error messages) happens if you double click on it?
what else can you tell us that might help us assist you?
LN -
I connected to home share on my ipad iphone and macbook pro now it's asking me to turn on home share on the apple tv but I have no other remote, any ideas?
Welcome to the Apple Community.
If home sharing isn't enabled on the Apple TV, you will need the aluminium remote that came with it to do so. -
I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?
If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.
-
I am connected to my wireless network but cannot access the internet. Any ideas?
I am connected to my wireless network but cannot access the internet. Any ideas?
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
my shuffle will not work!! it charges but once of charge it doesn't work, reset it but still no joy?? any ideas??
I did a little bit of experimenting. I have an iPad original versions myself. I took it out of the box knowing that I haven used it in months and I expected the battery to be dead and sure enough the battery was as dead as I imagined it would be. For the first 30 minutes I experienced exactly what you are experiencing, but then the iPad suddenly powered up on its own (like it does when plugged into the charger) and I am using it now to type this response to you.
My point is that I am starting tothink that your battery has suddenly died on you for some reason or you have a hardware problem now. I would still try leaving the iPad charge for a while longer - maybe even overnight - and then try again in the morning. Unplug the iPad and try resetting with the home and sleep buttons. Try plugging the iPad in again. Unplug it, try restarting again. Let it charge for a while again.
After trying something like that, if it still will not start up, then I think it's time for a trip to an Apple Store and see what the Apple Techs think.
Maybe you are looking for
-
I am looking for an accessory that has the Ipod port on one end and an HDMI port on the other end, so I can watch the HD videos I record on the 4S directly on my HD TV.
-
Need to put contents of a file stored in FileContents into a ByteBuffer
As the title says. Can't find anything that shows how to accomplish the goal. Have a file stored in FileContents. Need to get the file's contents into a ByteBuffer. Any ideas how I can go about doing that? Thanks
-
I am using .net application built in .net 2.0 using SQL server Express 2005 Replication publication functionality. Application setup is in 32 bit. Now i am running this .net application setup on Windows-7 [64 bit]. It gets installed successfully with
-
Cannot receive message on temporary queue
I am executing the following code in a web application. It is sending a message to a JMS queue. The MDB listening to that queue processes the message and posts a reply to the temporary queue specified in the JM
-
I just installed JDeveloper 11.1.1.4, dowloaded from SOA Suite site. How can I find out which version of patchset it included? It is Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923.