GREAT problem with C6-00 General keypad PLEASE ATT...

Hello
I just bought my new c6-00 nokia mobile, i realized on openning the general keypad from the home screen (in touch mode) and then choosing options > open keyboard that i cant switch to more characters except the main character of the button
Ex: if want to write bbbb, on pressing the button number 2 more times it stills write aaaa and dont switching to b, the same state with other buttons..
This problem exists only on choosing open keyboard from options after selecting the general keypad from the home screen.
I think that this problem exists in all c6-00 softwares, i hope that nokia can found a suitable solution or update for that..
Thanks alot

@ sudhakar35
i am talked about the general touch keypad not other keypads like the touch keypads found in (messages or any one else), the problem is found only in the general keypad that found on the home screen (open it then-> options -> open keyboard) and try to switch between letters then please till me if it works correctly or not,,,
thank you

Similar Messages

There is a problem with Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again.

We have Adobe Reader 8.1.3 set to open in the browser.
We are trying to open PDF files within IE Browser. While opening multiple documents in the IE Browser, we get "There is a problem with Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again." error, once we click on the "OK" button, PDF file opens in the Adobe reader. This happens randomly while some files open up in IE Browser and some files get the above mentioned error message and open in the Adobe Reader.
We need to open all the PDF files in the IE Browser. Any input is greatly appreciated.

I may be better off without the tool bar, but I have found anohter solution;
. Open Adobe Reader,
            go to edit menu,
            under Preferences
            go to Internet, uncheck "Display pdf in browser"
The pdf files then open, but not in the browser

Great problems with K7N2G-ILSR onboard raid controller

I have really great problems with my s-ata raid controller. First of all i had a 40GB HDD attached to IDE3. Worked really fine.
Later on my system crashed and my raid controller seemed to be dead. (no "no array is defined" no "press crtl-f to enter setup,...).
Then I attached a s-ata drive to the first s-ata interface. Suddenly the raid controller said: "no array is defined, press ctrl-f to enter setup". I entered setup an built an array an restarted my computer. Again: "No array is defined, press crtl-f to enter setup."
Now my raid controller seems to be dead again cause it doesnt say a word again.
Please help me if you can. (Besides i tried to solve the problem with updating my bios. I tried all versions from v1.0 to v1.3 but there was no result.)

I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

When I purchase and app or update it, it comes up with 'There is a billing problem with a previous purchase. Please enter another payment method'?

So when I go to update my apps and/or purchase them, a pop up comes up saying 'There is a billing problem with a previous purchase. Tap continue and sign in to view billing information.' So I press continue and sign in, then it goes to my 'Payment Method' page. In red writing below, it says 'There is a billing problem with a previous purchase. Please enter another payment method.' Because I used a MasterCard for my last purchase, it won't let me change it. I redeemed my account from an Itunes gift card to $20 but I cannot use it as it doesn't give me the option of using it. My only billing options are either a Visa Card, MasterCard or Amex Card. Please help me if possible!!!

same here. i was using a visa card ...now i can't because of this "error". my account is not empty, info is correct, don;t understand why this is happening. Two days ago it was working fine, then i wanted to update an app, and this stuff begins.
Help:)

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.

HT1918 I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me. There's a billing problem with a previous purchase. Please update your payment method. The program will not let me u

I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me.
There's a billing problem with a previous purchase. Please update your payment method.
The program will not let me update, what am I doing wrong. rose165

I would love to have a phone number to call someone with apple on this issue.

Problem with the Arabic vowelization in V 4.0 although we didn't face this problem with the previous versions ,so please fix it up quickly

There is a problem with the arabic vowelization in the browser version 4.0 although we didn't face this problem with the previous versions ,so please fix it up quickly because it affects on our work

Do you have an Arabic version of Firefox installed which isn't displaying the vowelization correctly, or are you trying to read it using an English language version?
There are a few add-ons for Arabic which might possibly help here: [https://addons.mozilla.org/en-US/firefox/search/?q=arabic&cat=all&x=0&y=0 Arabic add-ons]

I have just changed to Firefox from IE. When i pull up my home page which is the BBC.co.uk I have always to reset my local region as it always defaults to London. I didn't have this problem with IE. Can you please supply a solution, thank you

I have just changed to Firefox from IE. When i pull up my home page which is the BBC.co.uk I have always to reset my local region as it always defaults to London. I didn't have this problem with IE. Can you please supply a solution.

I fixed it!!! Following advice from similar posts, I searched the hard drive for "sessionrestore.js" in my Firefox Profiles folder (you'll need to enable viewing of hidden files in Windows Explorer (Tools > Folder Options > View (then select Hidden files option) then Apply to all folders) to do this). I then shut down Firefox, deleted the file and restarted - my home page was correct and it didn't try to open my old session! Some other posts suggested deleting everything called "sessionrestore" in that folder, but I didn't need to.

I tried downloading an app as per usual and the message 'There is a billing problem with a previous purchase. Please update your payment info' appeared. Everything in regards to my payment info is correct. What's going on? Help me!

I tried downloading an app as per usual and the message 'There is a billing problem with a previous purchase. Please update your payment info' appeared. Everything in regards to my payment info is correct. What's going on? Help me!

Is there any sort of error message on the payment details screen on your account ? If not then if you enter your card's security code does that trigger an error message ?

There is a billing problem with a previous purchase. Please update your payment method. Pls help me

There is a billing problem with a previous purchase. Please help me

Hi ...
Try these support articles ..
iTunes Store: Accepted forms of payment
iTunes Store: Changing your payment information

Problem with I-trigue 5600 . Please help!

hi,
My I-trigue 5600 worked perfectly for over 4 years. Buy recently, my rear right channel stoped working I 've tried everything : all satellites work poperly,drivers are ok, I tested it on 2 computers. There is still the same problem. Unfortunately Creative dosn't have after-guarantee service.. So, I tried to open subwoofer, but the inerity is too complicated with many areas flooded with glue or isolation. I tried also to buy another subwoofer / i believe it must have small damage , but the rest of speakers work great and the voice of subwoofer is good as well/ but there is problem with buying a subwoofer separately. Becouse there are only auctions on net.
So , what I supposed to do? Does Creative have separated spare parts to my subwoofer? Can I buy another subwoofer anywhere?
Can I replace my sub to similar from another speakers system and which one would be suitable.
I don't want to change my speakers. They are the best for me, but defect of one chanell is annoying. Really.
I wanted to buy x-fi elite pro ,but now it's pointless.
Please help me
Despere Makary

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Problem with numbering of general task lists by creation thru LSMW - (IA05)

I'm using a sequencial file to create general task list thru LSMW (Object 0490 which corresponds to TCode IA05).
The numbering range for general task list groups is internal. I executed batch input and it works pretty well with the first general task list group, but every next fails, because the number of the previousy created task list stays in the user buffer and apears in the PLNNR field, so the system assumes I'm trying to create a new group counter instead of new general task list group.
I explicitely set IBIPTLST-PLNNR = '' in field mapping - still the same problem. I also set user parameter PLN to be empty in SU3 and still no luck. I even turned off the historic data in local data tab of SAPGui, but the problem persist.
Can anyone tell me how can I achieve it without changing the numbering range to external?

Hi,
From IBIP Help:
Initial fields
As a general rule, initial fields in structures are not transported into the corresponding screen field. In other words, fields that are blank are ignored. If you explicitly want to reset a field to the value "<blank>", you must mark the field in the batch input structure with the value !. This is the reset indicator, and means that a field is to be reset to its initial value.
Try setting IBIPTLST-PLNNR to !
-Paul

E72: a great problem with my cam

Hi, all!!
That's one problem with my cam: when recording video on flash card there are some delays in picture changing and the image become smooth and then divide into squares??? how can i solve this bug???
ps: everything is ok when i record on the phone memory!
Thank you

Dearest nokia representatives....my problem is in the video recording mode..when i'm in the middle of recording,the motion in the screen moves slowly for about half a second..and sometimes it stucks before it went back normal and then again stuck...i'm terribly angry when i'm recording the precious moment s. i'm using the high quality setting and when i used the normal setting,the problem is gone but the picture is not good as the high quality setting.......
please solve my problem anybody/nokia?!...

Problem with Isight or Photo Booth PLEASE HELP

When ever i take a picture with teapot or spotlights or an other dark picture for the matter It comes out all white and pink kind of. It just looks weird and discollored but only pink and white. Please help me ( ps its only the new ichat effects it has problems with and idk how to delete them their the ones on this website from Ismiley)

Camille2345678 wrote:
http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
the link above is where i downloaded the effects but im not sure how to uninstall them and it doesnt say on the website. When go find it in Finder it says More Ichat Effects Uninstaller and i pressed it but it brings up like Terminal ( i think its some application) and i dont know where to go from there and most of the other effects work but the dark ones dont. Also i tried turning flash off and it doesnt help.
http://i45.tinypic.com/28twfns.jpg
According to the developer's website:
http://ismileys.free.fr/moreichateffects/support/
".... you can launch iChat and Photobooth in 32 bits only..."
If that does not help you, try uninstalling MoreIchatEffects. I do not use MoreIchatEffects, but, again, according to the developer's website,
http://ismileys.free.fr/moreichateffects/
"If you want to remove all effects, run the installer or remove files in /Library/Compositions"
(1) In addition to the extra effects, it appears that the MoreIchatEffects installer adds an uninstaller application that you say looks like Terminal. You should be able to run the MoreIchatEffects Uninstaller application by merely double-clicking its iCon and following any on-screen instructions.
If you need more help with how to run the Uninstaller than you can find from MoreIchatEffects> Help, you can contact the developer for assistance using the information from this page:
http://ismileys.free.fr/contact.html
Based on the "... check the number of your effects. If it isn't a multiple of 8, it will crash always." comment on that page, you may also want to count the number of effects in your Mac's Library/Compositions folder to be sure that is not your problem. If you need help finding the effects files you are to count, see the next paragraph of this post.
(2) If you cannot make the uninstaller work, note that the "Library/Compositions folder" that contains the effects files you can manually delete is the one in your Mac's startup drive Library/Preferences folder. Look in the "Compositions" folder there.
Do NOT remove any files from either the Library folder in your Mac's System folder
or from the Library folder in your ~ (Home) folder.
(3) If you cannot make either method above work for you, you can use your Time Machine backup from a date prior to the time you installed MoreIchatEffects. For help, see:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
(4) If all else fails, your Apple-Authorized Service Provider can help.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Strange problem with motherboard H67MA-E45(B3) =( please help

Hi, I have a strange problem with my motherboard . I have a H67MA-E45 (B3) (MSI-7678) , when i try to update it ( http://www.pcbrain.it/images/stories/msi/H67MA-E45/bios/14.JPG ) , i choose the fourth option "Select one file to update bios" , but the bios did not recognize the update file (E7678IMS.1C0) into the Usb flash drive , but if i choose the second option (select one file to boot) the file is recognized. First I made a backup of the bios, and into the USB flash drive has been created a file called "E7678ICX.162" (my current update). Why the extension is IXC ?!? it should have been IMS ! . I tried changing the file extension "E7678IMS.1C0" (the new update) into "E7678ICX.1C0" and when i select the fourth option , the file is recognized! . Obviously I have not started the update , but if I proceed with the update, changed the name of the extension, is it safe? Or do damage?..please help me :(
P.S. Sorry for my bad bad and very poor english , i'm italian =)

Quote from: HU16E on 28-September-11, 04:38:29
Manufacturer's Website info;
"KHX1333C9D3B1K2/4G 4GB 1333MHz
(2 x 2GB) CL9-9-9-27 1.5V"
Still think there is a batch conflict or possibly a bad stick in the new sticks. Might test each new stick individually for a bad one. Again, the other solution for an 8BG kit may be the new Kingston HyperX PnP's. Could you post a screenshot of CPUID's CPU-Z Memory & SPD Tab for one of the new sticks?
Added: Actually, screenshots of the old sticks Memory & SPD Tab may be of help too. It may be tRAS or tRFC differences between the two kits. Just speculation at this point though.
All the batchs works perfectly...this is the screen http://imageshack.us/f/163/ramkk.jpg/ ...save and zoom
EDIT: The old stick are SLOT #1 and SLOT #2 ...the new 3 and 4

GREAT problem with C6-00 General keypad PLEASE ATT...

Similar Messages

Maybe you are looking for