Great Problem with TO

The transfer requirement is created automatically,when a production order is released.
When i go to tcode: LB11, if i give all the details required to display the TR, NO data display.
IF i select, processing completed , then It is showing.
in Display TR: Display header:
i can see: Header staus as E- Processed.
in Display TR: single item
click : Processing status: open item= 0
Note: Prodn. sched. profile:
WM request: X - Only TR is active.
NOWHERE Auto TO is active
Is the TO created automatically ?
or
do I have to create TO from this TR?
if so, what is the reason for the TR showing Processed (E).
Thanks a lot.

in case system is creating an TO automatically then unitl unless you run a report system will not convert the TR into TO . or may be you have schduled the bacth for that report
i suggest you to check the settings of the warehouse movement type settings because may there you have not activated the creation of TO at all so in that system will be creating a TR only .
may be you are doing the putaway in the fixed bin .
please provide the details of the put way and the storgae type for that material

Similar Messages

Great problems with K7N2G-ILSR onboard raid controller

I have really great problems with my s-ata raid controller. First of all i had a 40GB HDD attached to IDE3. Worked really fine.
Later on my system crashed and my raid controller seemed to be dead. (no "no array is defined" no "press crtl-f to enter setup,...).
Then I attached a s-ata drive to the first s-ata interface. Suddenly the raid controller said: "no array is defined, press ctrl-f to enter setup". I entered setup an built an array an restarted my computer. Again: "No array is defined, press crtl-f to enter setup."
Now my raid controller seems to be dead again cause it doesnt say a word again.
Please help me if you can. (Besides i tried to solve the problem with updating my bios. I tried all versions from v1.0 to v1.3 but there was no result.)

I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

E72: a great problem with my cam

Hi, all!!
That's one problem with my cam: when recording video on flash card there are some delays in picture changing and the image become smooth and then divide into squares??? how can i solve this bug???
ps: everything is ok when i record on the phone memory!
Thank you

Dearest nokia representatives....my problem is in the video recording mode..when i'm in the middle of recording,the motion in the screen moves slowly for about half a second..and sometimes it stucks before it went back normal and then again stuck...i'm terribly angry when i'm recording the precious moment s. i'm using the high quality setting and when i used the normal setting,the problem is gone but the picture is not good as the high quality setting.......
please solve my problem anybody/nokia?!...

GREAT problem with C6-00 General keypad PLEASE ATT...

Hello
I just bought my new c6-00 nokia mobile, i realized on openning the general keypad from the home screen (in touch mode) and then choosing options > open keyboard that i cant switch to more characters except the main character of the button
Ex: if want to write bbbb, on pressing the button number 2 more times it stills write aaaa and dont switching to b, the same state with other buttons..
This problem exists only on choosing open keyboard from options after selecting the general keypad from the home screen.
I think that this problem exists in all c6-00 softwares, i hope that nokia can found a suitable solution or update for that..
Thanks alot

@ sudhakar35
i am talked about the general touch keypad not other keypads like the touch keypads found in (messages or any one else), the problem is found only in the general keypad that found on the home screen (open it then-> options -> open keyboard) and try to switch between letters then please till me if it works correctly or not,,,
thank you

Great Problem with Usb

Dear Customers,
i have a powerbook g4 1.67 15' with Tiger last version.
Since a couple of days the computer works perfect, BUT everytime the computer goes in standby ( generally after 10 minutes of unuse) than every USB stop working...even if i put an external Hd , i can see that there is no energy to the device. After rebooting , everithing goes well and all works.
Someone had this problem? Is a software problem ( i have to reinstall the operating sistem) or is an hardware problem?
i tryed to work with all the utility checking but i cannot solve th eproblem. maybe the hd have some problems?

To pretty much eliminate that software is a problem, load the combo 10.4.11 update. Repair permissions first, do the update, then repair permissions again. You can download it from http://support.apple.com/kb/DL170 . Then run Software Update afterwards.
Have you run the Apple hardware test? Find your original OS X disks, and insert the one that says 'AHT Version x.x' in small print on the label. Reboot holding the alt/option key down and choose the Apple hardware test. When prompted, choose the extended test. Does that identify any hardware issues?

OSX 10.4.6 Update give great problems with Intel

This my first time on apple discussions.
Y work with OSX almost a month and today I sign up to upgrade 10.4.6
Terrify. Y have needed to restart the computer out of extensions by recomendation of the shopper. The shopper says that this upgrade dont´work with the new models of apple computers based on intel. I lost several tipografies and I can't make security copies and work with my digital tablet.
The shopper says tat is necesary make a new instalation since the begining and
the cost of this is for my count. He says that is not his guilty and that I need contact apple and make a reclamation.
By the moment I beg if you know some solution or wherw I can demand.

No, Archive & Install does not erase your files or network settings. remember there are two problems going on right now. Security Update 2006-003 fouls Acrobat and causes it to lock up the system. So go back to an OS without that securityy update. For instance, 10.4.6 works without that Security Update.
The Quicktime 2 update is the cause of systems not rebooting. See this link.
http://www.macworld.com/news/2006/05/24/cs2quicktime/index.php

Great problem with bluetooth and MIDP devices

Hello all,
I'm making a client/server application with bluetooth JSR82 Serial Port Profile (SPP). The clients are mobile phones (J2ME application) that want to get informations from a server (J2SE application) that publishes a service.
My system works well with Sun Wireless Toolkit: it works fine also if I try to start a lot of servers and a lot of clients and a lot of other bluetooth device.
When I install it on actual environment like a personal computer with BlueCove stack and mobile phone like Nokia 6600 it works ONLY if there are 1 client and 1 server.
The problem is that the mobile phone doesn't find the server if there are other Bluetooth devices enabled!!!
I've made a lot of changes in my code but it don't work!
At first my client application works in this way:
1) start finding Bluetooth devices
2) a device found -> start finding services on this device
3) a server service is found -> stop device inquiry and connect to the server
4) else client continues to search devices and iterates like above
This solution works WELL on Sun toolkit but not on Nokia 6600 and Bluecove. So i changed it in this way:
1) start finding all bluetooth devices
2) after device inquiry stops:
3a) start finding all services on first device found... waiting for end
3b) start finding all services on seconddevice found... waiting for end
3x) ....
4) connect to the first service found
Also this solution doesn't work with Nokia 6600 and BlueCove!!!!!!!
I'm getting crazy!!!
Thanks,
Renato
ps Sorry for my English...

Hi guys, Im new here and its the first time i get to develop something using J2ME and J2SE toogether via bluetooth! You seem to be more expert than me so i was wandering if you could help me with some literature or even with some code.
I even tryed BlueCove but Im having some trouble! Please help me!!!
email me at: [email protected]

Great problems with Safari after update to IOS 5

Hallo,
for a few days I have updatet my iPad 2 from IOS 4 to IOS 5. Now after the update the navigation under Safari on websites with DHTML-navigation doesn´t works. Take a look for example on wepages like this:
http://www.firstlex.de or http://www.ischeidung.de .
You will see, that the horizontal-navigation opens only for fewer as a second and it is not possible to open the navigation-submenus!
With Safari under IOS 4 it works perfectly! The navigation-submenus stands still and it was possible to open the navigation-submenu that you want with to klicks on it. Allthough it is possible to open the sub-submenus under IOS 4, but now not more under IOS 5 !
Did anybody have a solution for this problem???
Thank you for replys!
Greetings Mikeam13

For Safari crashing then you could try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Some people have also suggested turning off iCloud on the iPad
In terms of the thumbnails, then Safari on iOS 5 uses tabbed browsing and you can't go back to thumbnails. You can try leaving feedback and maybe in a future update we'll get the option : http://www.apple.com/feedback/ipad.html

I have three programs I would like to uninstall from my apple pro , also I am trying to install skype but having great problems with this to Marie

Hello, I have three programs I would like to delete and uninstall from my apple pro , plus I cant seem to install skype for some reason,as we are going to be traveling around Australia soon I would like to keep in touch with family and friends. I would be most thankfull for your help
Regards Marie

Hi Marie
Can you please describe what happens when you try to install Skype? I've found one common issue people have is that they don't actually fully install it - a lot of people download it, open the downloaded image, and run it from there - and dont actually ever copy it to their Applications folder, so next time they look for it, it can't be opened. Try again from scratch - go to the Skype website, download the file, if it doesn't automatically display the Skype disk image on your Desktop, go to your Downloads folder, locate the Skype download and double-click it to open, then, open a new Finder window and drag the Skype application from inside the disk image to your Applications folder. Once that's done you can trash the disk image. Go to your Applications folder, find Skype and launch it. Let me know if you get stuck.
As John says, it would be very helpful to know exactly which Mac you have. If its a laptop, you probably have a MacBook Pro, not a Mac Pro, which is a very large, heavy silver box and not amenable to being dragged around Australia!
Matt

Communication Problem with Nomad Explo

Hi All!
I have a pretty great Problem with my Creative Zen Touch I bought just one month ago:
When I connect it to the Computer to store or read File Data, the connection slows down to a minimum and when I try to drop something or just open a folder, the Nomad Explorer does not react anymore. So I'm not able now to retrieve my important backu
ps.
I guess it could be a worse and non-readable storaged file that cause the problem, because a few weeks ago there were no problems. But I don't know how to find and clear this problem file, if there is one. Another friend guessed it the built-in HDD could me fragmented, but I don't think I have coused such data traffic in one month. So my Question is: Can I format or defrag the HDD? Or maybe there is an alternati've Explorer so I don't have to use the Nomad Explorer? Or has the Nomad a kind of "Debug Modus" to ignore or delete wrong files? I would be gradeful for any help, thanks, Alexander (7, Germany)
Technical Spec. of the Computers I tried to connect to:
AMD Athlon XP 00Mhz
256MB RAM
Windows 2000 Professional
USB 2.0
(worked for a while, about two weeks. then the problem appears!)
AMD Athlon64 3200+
024 MB RAM
Windows XP Professional and Windows XP 64-Bit Edition
USB 2.0
Intel Celeron 200MHz (Laptop)
28 MB RAM
Windows 2000 Professional
USB .
Intel Pentium 4 3200Mhz
024 MB RAM
Windows XP Professional
USB 2.0
The Creative Zen Touch was already on the newest Firmware when I byed it. On all computers was used the Creative Nomad Explorer, installed from the CD or downloaded from Internet (Creative.com Support).

Hum.. Yep, thanks. Yesterday I read the post about how to access the rescue mode. checking and clearing up the HDD doesn't work, but after formatting it seems to work normally again, after losing all the backups I had... After all, I'm glad I don't have to send back the Zen to Creative. And thanx they set such a nice recovery mode into the ground system of the player =)
Thanks for Help. Now Admins can clear my Account, I wo'nt use it anymore

Problem with Flexmotion 7344, UMI 7764 and servo driver parts

Hi to all of you, I've a great problem with my motion system.
This is formed by:
1.Flexmotion 7344, cable and UMI 7764 (NI-kit)
2. 2 servomotor and 2 incremental encoder
3. 2 Motor drivers
The problem is that the motor drivers (AXOR MICROSPEED) can' t work with the NI-kit, sometimes the motor go and sometimes not, so the repeatabitlity is very very low.
I work a lot trying to solve this but i suppose that the PID of the driver runs counter to the PID of the Flexmotion.
This thing was confirmed by the NI Italy staff. They tested the system and comfirmed my sensations but i had not any feedback about the type of drivers that i' ve to buy to work with my system.
I try to attach the datasheet of the motors and the encoders at the post.
If any one can help me in some ways i thank a lot. If necessary is possible to contact me by mail at [email protected]
Motor type: 17PL085
Encoder type: EH17 M500 Z 5 P 6 X 3 P R 7 8
The last important thing is that the system with this configuration of motors, encoders and drivers worked in the past with the old NI flexmotion 6C.
What we would do is to mantain this configuration of motors, encoders and drivers but substitute the old flexmotion with the new.
Thanks to all.
Andrea
Attachments:
SERVOMOTORI SIBONI.pdf ‏833 KB
AXOR.pdf ‏238 KB
encoder ELTRA.pdf ‏119 KB

Andrea-
Yes. According to the datasheet, that drive can be ordered in different versions. There are different options like control mode and feedback type. Please give us your part number. Typically, position controllers expect the drive to accept a torque reference(+/10V). It is possible to use it in velocity mode, but you need the differential option. If that is the case, then you have 2 PID loops to worry about and tune. One in the drive, and one in the controller.
Brian

Problem with compressor 2.01

Hallo everyone.
I've a great problem with compressor 2.01 and Final cut pro 5.04.
When I try to export a movie from final cut to compressor, all the two application crash.
All is regular when I export the movie with Quick time.
This happens to me for the first time I used Final cut.
The second problem is that when I try to reinstall compressor from the original CD, compressor is gray and not black.
I've used yet every possibilities also with Disk warrior applcation without succes
Please help me. Thank you

You need to update to Compressor 2.3.1 for Leopard compatibility.
Use Software Update, under the Apple menu item at top left of your screen, or look here: http://www.apple.com/finalcutstudio/finalcutpro/download/

Performance Problem With Foms9i application

We have developed an application on forms9i and we deployed it on the internet.
Everything works very good but we have a great problem with its speed. It's so slow that
the users have to wait for about 30 secs between each click!!! This is acceptable if the client
uses 56k-dialup connection but this happens on users with dsl connections too!!!
We run the application on the server (without any network getting in the way) and it has the same
speed(30 secs for just a click!!!).
We have also removed any graphics from the forms but the performance is the same.
On the other hand on our development machine the application works just fine (using the same amount of data)!!!!
help us please.....
------Server Conf :
Xeon CPU
3GB Of RAM
Oracle 10 database
Oracle 10gAS
------Development PC Conf:
AMD Athlon XP 2600+
512MB Of RAM
Oracle 9.2 database
Oracle 9iDS

Just to be sure, I would recommend that you try a completely empty form with just two fields.
But if the performance is fine on your dev machine and not on the main server, then clearly something is wrong. Perhaps there is a port-specific issue on your server. If you have the possibility of installing a test version onto a another machine for comparison, that might answer some questions, especially if it's a different platform.
Since it works on machine and not the other, this is also a support issue. You could contact Oracle Support and see if they've seen this before.
Regards,
Robin.

Problem with trasparent gateway versus Microsoft SqlServer.

Hi.
When I declare a cursor into PL-SQL procedure that select records from a SQL-SERVER table linked using a trasparent gateway.
I have two problem:
-1- I' m unable to update the linked table. I receve e timeout exception.
-2- whe I execute the second fatch operation I receve ad error : invalid cursor.
Trasparent gateway is configured as two_fase_commit.
Can Anyone help me?
Best regards.
Vincenzo

Hallo
Yes I've tired ad it correctly work. But when I exit from cursor without make commit, and I run this simple update query (that works in sql/plus)
"update lsruni_ser@anaconda set "lsruni_ser_flag_elab" = 'Y' where "lsruni_ser_flag_elab" = 'Y';" I receve a timout messagge from SQL SERVER.
I HAVE GREAT PROBLEM WITH INSERT QUERY USED IN A PL-SQL PROCEDURE.
Thank You for support.
Vincenzo

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Great Problem with TO

Similar Messages

Maybe you are looking for