Great videos for getting started on BC with Muse or Dreamweaver CS6

Hey all,
Just thought I'd share some helpful videos now available. This is great for new creative cloud users wanting to get their head around BC.
Getting Started with Business Catalyst and Dreamweaver CS6 – What is Business Catalyst?
Getting Started with Business Catalyst and Dreamweaver CS6 – Creating and Publishing Sites
Getting Started with Business Catalyst and Muse – What is Business Catalyst?
Getting Started with Business Catalyst and Muse – Creating and Publishing Sites
Happy learning!

Thanks Danny...awesome share!
-Sidney

Similar Messages

  • Cannot "Get started" or publish a site from Dreamweaver CS6 because the account is not associated wi

    I cannot "Get Started" the Business Catalyst extension from Dreamweaver CS6. This is the error message I receive: "An account with the same email already exists in Business Catalyst. To associate the Business Catalyst account with your AdobeID, please log in to the Business Catalyst web administration console."
    I have tried the following actions as per this note, but still unsucessful: http://forums.adobe.com/docs/DOC-2202#comment-5263
    Can anyone help please as I have purchased CS6 now and have sites that I need to administer, I have uninstalled cs 5.5 which worked fine.

    There is no need to install the Business Catalyst extension in Dreamweaver CS6. Business Catalyst is incorporated into the program.
    If you're having difficulties logging into BC, I suggest that you post a request for help in the dedicated Business Catalyst forum.

  • My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning t

    My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning to CS6, rebootet and so on - nothing worked. Two hours later I tried to install DW 5.5 - that worked. Afterwards I tried again to install 6.0 - without success. Can anybody help?

    Thank you for your answer. I could not find caps.db.
    Meanwhile I solved the problem as follows: I searched for "dreamweaver" everywhere an deleted everything I could find. Then I searched for "CS6" and did the same. I guess there were around 20 or more places where I deleted directorys or files. Suddenly the installation did not stop at 2 % what it always did before and the installation was a success :-) It cost me more than 4 hours to figure that out and I did not find a really helping hint somewhere. Adobe itself I could not contact because I could not find an email adress or a phone number - poor support for such an expensive software. For luck I did not have to deliver something just in time. Lacking a useful support is a really poor, poor attitude of Adobe... I think I will not buy anymore Adobe products - it could cost too much of my time... :-(

  • Where can I find a tutorial for getting started with 3D in Motion 3?

    I want to use the 3D feature in Motion 3, but I am having a problem with getting started on how 3D works in Motion 3. Can someone please point me a basic tutorial to get me started using this feature, or just offer the steps I need to use to get started. I sincerely appreciate your help.
    Kindest Regards,
    Sebastian

    http://www.pixelcorps.tv/macbreak74

  • Trying to find the location for getting started with hootbar

    I added the hootbar addon and on the information page about the addon it said you could go to the getting started page to find information on how to use hootbar but I can't locate the page

    You can try this link:
    http://hootsuite.com/hootbar

  • What's a good book for getting started?

    I've been doing web design in HTML and ColdFusion for almost 3 years. It's clear that ColdFusion is on it's way out and I need to learn J2EE/Java/JSP etc. I have a few questions:
    Java is a term I've heard associated with C++ and other types of programming as well as Web design. Are the Java/C++ Java and the Web Java basically the same type of language? Is the Web Java and JavaScript the same thing? I'm very confused!
    What is a good book for getting these types of questions answered and getting started in J2EE/Java/JSP? There are quite a few variations of script languages out there and I want to make sure I learn the right stuff, ie the stuff that employers are going to be needing.
    Thanks!

    Here is a free online version of a good book:
    http://pdf.coreservlets.com/Core-Servlets-and-JSP.pdf
    Print it off or read from the screen. Otherwise, there are several good Java books out there. What I would do is go to the bookstore and thumb through a few books. Depending on what type of book you want (example based or theory) find the books that you think would satisfy your learning style. Write down the names and authors, go home and buy them used online at Amazon for tremendous discounts. This way you can buy several versus just one.

  • How to get started Organizing photos with tags and albums

    Apporximately 15,000
    Mostly family, vacations, travel, etc over 30 years
    What is the BEST way to get started?  Should I tag them first or put them in albums and sub-albums and then try to tag and further identify them?  I know nothing of how is best to proceed.
    I am oveerwhelmed with the process and cannot seem to find a starting point.  I have looked at many of the tutorials, but cannot find a "1-2-3 A-B-C" roadmap.
    Message title was edited by: Brett N

    I would recommend doing all (okay, almost all) of your organizing via tags. Don't bother using albums unless there are a subset of photos that you want to display somehow (like a slideshow, or photobook) in which case albums are the right tool. Also, make sure that when appropriate, you add the proper captions and notes.
    I would start by using pencil and paper (or word processor) to make a list of categories and tags, in the appropriate hierarchy, that you might want. For example, in the people category, there are tags Jones Family, Smith Family, etc. (and sub-tags with people's names) In the event category, there are tags Vacation, Beach, Christmas, Hanuka, etc. Other categories you might want: Location (example: New York, Boston, Illinois), Content (mountain, church, waterfall, gorilla, historical site). This part completely depends on you.
    Once you have this hiearachy of categories and tags to your liking, start creating/adding the tags (and captions and notes if needed) to your photos. You can work in small batches. Eventually you will have all your photos tagged (trust me, I know, I did this too).
    Do NOT: move photos or folders from here to there, or rename them ... this is unnecessary extra work, as you will be using your tags from this point forward to locate your photos (exception: if you want/need to move the photos to a different hard disk, then by all means do so).

  • ADVICE FOR GETTING STARTED IN RECORDING

    I have just purchased a new IMAC 24 inch 2.4 core duo with 4 gigs of ram. I was wondering what a good setup would be in getting started in home recording, would a good audio interface such as the presonus firestudio, with garageband be good, or something like presonus firestudio, with logic studio, be better, or maybe apogee ensemble, with logic studio? We will be doing some song writing, and recording a band. Any help would be appreciated. Like I said totally new to this.

    TCHADWELL wrote:
    Hey thanks for replying, garageband is a pretty cool app. and I would not mind starting in that , what ever I start in to learn, I want to stick with that and learn it. How much of a learning curve will it be to go from garageband once I learn it, to logic? Audio quality is going to be important for song demos and ect.
    The thing about GarageBand is that there's virtually no learning curve. It uses the same sound engine as Logic, but with a distilled interface that boils everything down to basics. Also, the latest upgrade to GB makes it less of a toy, and if you wanted to get started recording your band today you could plug and play into GB and do your thing with minimal technical distraction.
    Logic has a bigger learning curve because it lets you control a million more things, but if you are motivated to learn it, that shouldn't be a problem. I actually enjoy learning and using Logic and you might too. Logic Studio also comes bundled with many extras that make it a terrific deal. You could always start recording in GB while you learned Logic, or just jump right into Logic if you were motivated to dive into the deep end first!
    As far as interfaces go, as a practical matter, I think you would need to figure out if you're all you going to play and record together as a band, and if you have enough inputs for that. If you weren't going to use a separate mixer, the interface would need enough inputs to accommodate all the cables that were carrying signals from you instruments and voice(s).
    The NRV-10 is very flexible for rehearsing + recording, although you would get better sound quality from either the Ensemble or FireFace. I would guess the Firestudio hovers around the NRV-10 in terms of sound quality. The truth however is that any of this stuff will likely sound good enough especially as you are just getting started. While it's easy for pros to wax poetic over master clocks and vintage pres, the fundamental technology has advanced to the point that any of these interfaces in the Firestudio range on up is going to enable anyone just starting out to get terrific results. And after you have some experience, and find that you have a specific need or want to lift the audio quality of a particular component, then there's a world of gear out there clamoring for your Benjamins .
    So if it were me, I'd want to make sure that whatever I was getting was compatible with my system, could accommodate my inputs, and had sound quality that was good enough for my immediate goals. Also, as you are just starting out, I can almost guarantee you that you will need things that you don't yet realize you need. So whatever your budget is you should leave a little wiggle room for unanticipated expenses.

  • Login to SQL Developer as the SYS user for Getting Started tutorial

    I went to try and do the following tutorial to learn about SQL Developer 3.0, but I cannot get started because I'm unable to perform Prerequisite #3.
    How do I "Login to SQL Developer as the SYS user"?
    Dave
    Getting Started with Oracle SQL Developer 3.0
    Prerequisites
    Before starting this tutorial, you should:
    1 .
    Install Oracle SQL Developer 3.0 from OTN. Follow the readme instructions here.
    2 .
    Install Oracle Database 11g with the Sample schema.
    3.
    Unlock the HR user. Login to SQL Developer as the SYS user and execute the following command:
    alter user hr identified by hr account unlock;
    Note: This tutorial is developed using Oracle SQL Developer 3.0.
    4 .
    Download and unzip the files.zip to a local folder on your file system. In this tutorial, we use the C:\sqldev3.0 folder.

    I installed XE. It asked me to set up a username and password during the install.
    How do I login as the SYS user, though?
    There is a Connection Name, Username, and Password field when I try to set up a connection in SQL Developer, and I used the username and password I made during the install. I clicked the Test button to test the connection.
    I see "Status: Failure -Test failed: ORA-28009: connection as SYS should be as SYSDBA or SYSOPER".
    How do I tell SQL Developer "as SYSDBA or SYSOPER"?
    Sorry, this is probably easy, and I'm just clueless about it.

  • Framework Settings for map in Endeca studio for getting started application

    Hi All,
    Can anybody tell me,what is the default framework setting for below fields when we installed endeca studio to make getting started application work especially map settings,
    df.mapviewer:???
    df.mapTileLayer:    ???
    df.mapViewer:     ???
    Due to change in configuration i cannot see the map in getting started application please help to solve the above problem.
    I m getting below error
    MapView service is not available, please contact your system administrator.

    Hello.
    df.mapTileLayer:    "elocation_mercator.world_map"
    df.mapViewer:     "http://elocation.oracle.com/mapviewer/"
    and i think you was asking also for:
    df.mapLocation:   "elocation.oracle.com"
    Let me know if this helped you
    EBrauerP

  • Looking  for getting started docs of OGG

    Hi All,
    I am new to the OGG . I have hands on experience in ODI .
    I am trying to get started learning OGG.
    Please share any documents to get started with OGG (Developers guide)
    Thanks,
    Yellanki

    Wouldn't everyone?
    You can get the OGG documentation here:
    http://www.oracle.com/technetwork/middleware/goldengate/documentation/index.html
    There really isn't a developer's guide, but you can get a tutorial (based on version 10.4) here:
    http://www.oracle.com/technetwork/middleware/goldengate/learnmore/ogg-tutorial-ora-to-ora-10-4-177139.pdf

  • Tutorials for getting started in Garageband

    Hi,
    I am just getting started in Garageband , i was wondering if anybody could point me in the direction of any good tutorials that cater to novice users who are not that musically inclined.
    Thanks in advance.
    Powerbook g4   Mac OS X (10.4.5)  

    Start out with GarageBand's Help, there's a link to a tutorial right in the getting started help page. --Hang

  • FM for getting teh file name with path

    Hi guys,
    Is there an fm getting the file name with path given the physical path and file name? Thanks!

    Hi Mark,
    Function Module WS_FILENAME_GET is obsolete, dont use it.
    Use the Method file_open_dialog of  class cl_gui_frontend_services as given below.
    DATA:
        lt_filetable TYPE filetable,
        lf_rc        TYPE i,
        lv_filename(50) TYPE c,
        lv_fileext(3) TYPE c,
        ls_file TYPE file_table,
        lv_file TYPE localfile,
        lv_title TYPE string.
      lv_title = sy-title.
      lv_progname = sy-cprog.
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          window_title            = lv_title
          file_filter             = '*.txt'
          multiselection          = abap_false
        CHANGING
          file_table              = lt_filetable
          rc                      = lf_rc
        EXCEPTIONS
          file_open_dialog_failed = 1
          cntl_error              = 2
          error_no_gui            = 3
          not_supported_by_gui    = 4
          OTHERS                  = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
                   DISPLAY LIKE 'E'
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        EXIT.
      ENDIF.
    * Number of selected filed must be equal to one.
      CHECK lf_rc = 1.
    * Access selected file
      READ TABLE lt_filetable INTO ls_file INDEX 1.
      CHECK sy-subrc = 0.
      lv_file = ls_file-filename.
      SPLIT lv_file AT '.' INTO lv_filename lv_fileext.
    Revert back if you need clarifications.
    Regards
    Karthik D

  • Step-by-step tutorial/video for ASP Membership/Role Website with SQL CE 4.0?

    I'm looking for a step-by-step walkthough, tutorial, or video for setting up a basic ASP membership/role website using SQL Server Compact 4.0 and the NuGet package "ErikEJ.SqlCeMembership".  Should I be using this on an empty or basic website?
    -BGood

    Thanks ErikEJ.  I looked at
    https://sqlcemembership.codeplex.com/ but got scared off by the comment:
    "Breaking news - stop using this library:  A Microsoft supplied Provider has been released on Nuget.org, I recommend that you use this going forward, this provider support all SQL Server 2005+ platforms, including SQL
    Server Compact 4.0."
    So I downloaded the NuGet Universal Provider instead.  Is it still OK to use the "ErikEJ.SqlCeMembership 2.1 NuGet package"?
    Thanks.
    -BGood

  • Best book for getting started with FCE

    I upgraded to FCE from iMovie thinking that I would be able to just hop right in and well, I have been able to do so, but I have the feeling that I'm not using the full power of the application. In fact, I know this to be the case. I'm getting the same feeling I got about minute 90 of using Photoshop.
    I'd love to have a book that can teach me the basics of FCE. I'm currently authoring a lot of screencasts for my job and I'd like to be able to give them a high-gloss sheen.
    The amazon reviews seem to be all over the place, but it seems like the one everyone seems to settle on ( sometimes grudgingly ) is the Apple-blessed one by Weynand ( even if it seems to be dated against the state of the application ).
    Can anyone offer advice?

    I would second Al's suggestions to try one of Tom Wolsky's books and also take a look at the FCE forum.
    Regarding not using the full power of FCE, I don't think anyone does.
    It's like climbing one of those mountains where you seem to be reaching the summit only to discover, when you get there, that there is yet another peak ahead !

Maybe you are looking for