Green and Grey Arrows
I have been trying to sync my playlists so that I can listen offline. On some of my playlists, most of my tracks have a green arrow, but the entire playlist has a grey arrow next to it. Does this mean I can still listen to those songs offline even though the entire playlist isn't synced? Also how do I fix this problem? It looks to me the reason the playlist doesn't have a green arrow next to it is because there are songs on there that I have deleted that I can no longer play (they are still on the playlist, they are just in dark grey and can't be played). Any idea how to fix this? Going on a trip and want to listen offline. Also if this helps at all. The same playlists on my phone that aren't syncing entirely are also not showing up as being avaliable offline on my macbook. On my macbook these playlists have a syncing arrow thing next to them.
Hello & welcome to the community!
Firstly and just to be sure, verify if the playlist you want to download has the Offline usage switch on.
Now, when each individual song has a green arrow, it means that you can listen it on Offline Mode.
If a song has a grey arrow next to them, it means that it isn't downloaded yet, but it is going to be downloaded.
If a song has a loading symbol it means it is dowloading for offline syncing.
If a song isn't being downloaded on a playlist maybe it's because of device memory.
Spotify will stop downloading songs when the device you are using has a small available storage.
(sometimes even if you have 500MB-1GB available)
Try deleting apps and stuff you don't need and maybe that helps.
Check your internet connection too.
Maybe closing the app and its process helps.
If nothing works then I would reinstall the Spotify app.
When a playlist shows a green arrow next to it, it means it already has all the songs within it downloaded.
When a playlist shows a grey arrow next to it, it means that it was marked for offline usage but not all the songs within it are downloaded.
Let me know if you have any more doubts.
Hope this helps! ♫
Similar Messages
-
I am using Final Cut Pro Version 6.05.
What I mean by green and grey bits is that in the exported footage randomly some scenes will be replaced with a green or grey screen instead the footage. The audio remains the same.Hello Russ,
I have FPC X 10.1.3 and Yosemite. Thanks for your concern but i solved my problem. I created new library and copied event in new library.
Everything is back to normal now. The share button lives again.
kindest regards -
What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.
The entries in blue are people you've recently exchanged iMessages with, the ones in green are people with whom you've recently exchanged SMS messages and the ones in grey are people with whom you have not recently exchanged any messages.
-
My iphone screen just shows red, green and grey lines?
I dropped my iphone 5 on gravel and the glass was all cracked but still working perfectly, the other day i dropped it again inside my house, working fine, but some glass fell out, then this morning I squeezed it a little hard and part of the glass was off, then i pushed it back in and about a quarter of the screen went black, and the rest got darker, and it also would open things and select things on its own, then after it was in my pocket the entire screen turned to black with some green, red and other colored lines on the black, it will still vibrate for messages and when i hold the home button i hear the siri thing. Do I need an entire new phone(which i really dont want to replace it) or can this be fixed? and if it can, is it just the screen or also some internal parts? Thanks for reading
Have you tried creating a backup then restoring the phone as new? If it's still happening on a wiped phone, it's almost definitely a hardware issue that needs to be repaired
-
Restart request and green and gray stripes on screen, impossible to run
Hi.
My MacBook does not start correctly. I immediately get the "you need to restart your computer message on a screen that is covered by green and grey stripes vertically. One issue I had recently is that I got close to the limit of the harddrive (1 GB space left).
ThanksWelcome to Apple Discussions!
1 GB is not enough free space--you are in danger of a crash and losing everything. Here is a link for doing that:
http://www.thexlab.com/faqs/freeingspace.html
It sounds like you are experiencing a kernel panic. Here is an article that might be helpful:
http://www.thexlab.com/faqs/kernelpanics.html
Do you have a good up to date backup? If not, you need to make one before it is too late.
Good luck! -
Dispatcher stops after starting SAP and turning from green to grey
After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck, -
When connecting to a site the tab has a spinning icon. It is grey and it spins counter-clockwise. Then it changes color to green and spins clockwise. Does this mean anything (possibly transferring data or data done). If so, what triggers the change. This is not a problem I am just interested in this behavior.
Counter clockwise means that Firefox is trying to connect to the server and is waiting for the server to respond to that request.
-
When I start firefox the normal page doesn't open and instead the tabs start connecting and connecting without any website and the grey circle that each tab has turns green and then grey and the process repeats itself. And If I try to type an address I can't because upon pressing 'w', it tries to connect to what I don't know.
hello, it sounds like a theme or extension might be interfering here. please try launching firefox in safe mode once and see if the issue is occurring there too. in case it's working correctly, please go to firefox > addons > extensions and disable/remove any extension that look suspicious/you didn't install intentionally or that might interfere with the tab loading behaviour.
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
Why when I send messages from my iPhone to other IPhones, they come up green and not blue? I have all the settings on for I message b ut my number comes up grey and not black? Please someone help!
Hi evan191,
Thanks for using Apple Support Communities. This article has some steps you can try if your messages aren't sending as iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Cheers,
- Ari -
Why has my new Yosemite begun to display purple, green and black
why has my new Mac Yosemite begun to display un purple, green and black
This behaviour takes over the whole screen. Restart brings back normal grey/white but the colour problem returns during further computer use.
No changes have been made to the colour preferences. -
After syncing my iPad2, all of my color/contrast settings are messed up. Reds look blue and greens look grey. It reminds me of infra-red imaging. I'm not sure what happened. Can someone tell me how to fix this and maybe tell me what I did to cause this?
Try going to Settings > General > Accessibility > white on black and turn this OFF.
-
Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart
Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart. Here is my recent crash report. Please help me.
Anonymous UUID:
714EBD8C-083D-E200-A9BD-6F925A8F8F14
Thu May 29 22:30:04 2014
panic(cpu 0 caller 0xffffff80026dbf5e): Kernel trap at 0xffffff80026d1197, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffef8022f973c8, CR3: 0x0000000089778000, CR4: 0x0000000000000660
RAX: 0x000000000000001c, RBX: 0x00000000e00002c2, RCX: 0xffffff8002abb7d4, RDX: 0xffffef8022f973c0
RSP: 0xffffff800d2cb6a0, RBP: 0xffffff800d2cb6a0, RSI: 0x0000000000000001, RDI: 0xffffef8022f973c0
R8: 0x0000000000000001, R9: 0x0000000000000001, R10: 0xffffff8014ea65e8, R11: 0xffffff809b3160f0
R12: 0xffffef8022f973c0, R13: 0x0000000000000001, R14: 0xffffff800d2cb6ec, R15: 0x0000000000000001
RFL: 0x0000000000010202, RIP: 0xffffff80026d1197, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef8022f973c8, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff800d2cb330 : 0xffffff8002622fa9
0xffffff800d2cb3b0 : 0xffffff80026dbf5e
0xffffff800d2cb580 : 0xffffff80026f3456
0xffffff800d2cb5a0 : 0xffffff80026d1197
0xffffff800d2cb6a0 : 0xffffff80026afd0e
0xffffff800d2cb6d0 : 0xffffff8002abb751
0xffffff800d2cb710 : 0xffffff8002abb54f
0xffffff800d2cb760 : 0xffffff7f8413fd2f
0xffffff800d2cb7a0 : 0xffffff7f84188b21
0xffffff800d2cb7e0 : 0xffffff7f841708d2
0xffffff800d2cb850 : 0xffffff7f84170fc8
0xffffff800d2cb890 : 0xffffff7f8413dfea
0xffffff800d2cba10 : 0xffffff7f8416d940
0xffffff800d2cbad0 : 0xffffff7f8413cad9
0xffffff800d2cbb20 : 0xffffff8002acea56
0xffffff800d2cbb40 : 0xffffff8002ad0051
0xffffff800d2cbba0 : 0xffffff8002acdabf
0xffffff800d2cbcf0 : 0xffffff80026b66a8
0xffffff800d2cbe00 : 0xffffff8002626bf1
0xffffff800d2cbe30 : 0xffffff80026139f5
0xffffff800d2cbea0 : 0xffffff800261e043
0xffffff800d2cbf20 : 0xffffff80026c975d
0xffffff800d2cbfb0 : 0xffffff80026f3a28
Kernel Extensions in backtrace:
com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f84 12b000->0xffffff7f841f5fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f82cbe000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f8324b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f83208000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f8325b000
BSD process name corresponding to current thread: Skype
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:
0x0000000002400000
Kernel text base: 0xffffff8002600000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 60200033152435
last loaded kext at 44797399467641: com.apple.filesystems.smbfs
2.0.2 (addr 0xffffff7f84b15000, size 335872)
last unloaded kext at 15796237223278: com.apple.macos.driver.AppleUSBEthernetHost
7.0 (addr 0xffffff7f84b15000, size 20480)
loaded kexts:
net.telestream.driver.TelestreamAudio
1.1.0
com.rim.driver.BlackBerryUSBDriverInt
0.0.97
com.apple.filesystems.smbfs
2.0.2
com.apple.filesystems.ntfs
3.11
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM
100.14.15
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.6.1f2
com.apple.driver.AppleMikeyDriver
2.6.1f2
com.apple.GeForceTesla
8.2.4
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AudioAUUC
1.60
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.4f1
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleIRController
325.7
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.iokit.SCSITaskUserClient
3.6.6
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
5.0.2
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.nvenet
2.0.21
com.apple.driver.AppleUSBOHCI
656.4.1
com.apple.driver.AppleUSBEHCI
660.4.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
217.92.1
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
217.92.1
com.apple.AppleGraphicsDeviceControl
3.5.26
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.6.1f2
com.apple.vecLib.kext
1.0.0
com.apple.driver.AppleHDAController
2.6.1f2
com.apple.iokit.IOHDAFamily
2.6.1f2
com.apple.nvidia.classic.NVDANV50HalTesla
8.2.4
com.apple.nvidia.classic.NVDAResmanTesla
8.2.4
com.apple.iokit.IOAudioFamily
1.9.7fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSurface
91.1
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.4f1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.7.0d11
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.6
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.1
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.driver.NVSMU
2.2.9
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOUSBFamily
677.4.0
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.pthread
1
com.apple.kec.corecrypto
1.0
System Profile:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:riyazfrombangalore,
your 13-inch Mid 2009 MacBook Pro requires 1066 MHz RAM, but you have 1333 MHz RAM installed. Try replacing the 1333 MHz RAM with 1066 MHz RAM — Macs can be picky about the RAM which they find acceptable. -
my iphone 3 when turned on shows a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!
Do what you are being told. Plug the phone into a computer running iTunes and restore the phone.
-
Shuts down after start tone and grey screen with pin wheel...!???
Hi all, first time here so please bear with me,
even though i have had my imac for so long now, i have only in the last three to four months started playing around with it, i really am a newcomer to macs, and pc's come to that! so far i have only connected up to the internet and put a couple of home video's onto dvd, and play music.
i have been reading a lot of the other posts and frankly i'm lost!
it is about 20 months old and was bought in the uk, i live in cyprus and for that reason i did not purchase an apple plan.
we do not have an apple store here although there is an apple dealer, however they are not soley apple and over here service leaves a lot to be desired! so i am reluctant to take it to them as they are likely to just keep replacing parts and eventually present me with a huge bill!!
anyhow this is the problem:
several times the screen went dim and froze, with a message saying to "push the power button to switch off and and then switch on again", it seems this happened each time when i opened azureus? after this happened a few times it would no longer open the desk top, it would load normally,ie. grey screen with pin wheel followed by blue progress bar and then just a blank blue screen, the blue tooth mouse however was still connected as the cursor would move. it has now changed again! start up tone and grey apple screen with pin wheel for about 30secs or so, then the fan seems to go into turbo mode for a few secs before switching off....i feel sick!! i was really getting to like my mac.
i did recently install tiger, but there were no problems at all with that and it is running on a friends apple with no problems at all, more recently i added more memory which coincided with when i started using torrentspy and azureus,
i did read in another forum something about possible memory probs, so i followed the tip to remove the memory and the back up battery and leave the computer unplugged for 24hrs, i replaced the battery but not the memory, i'm still getting exactly the same shut down result.....
can anyone shed some light on this pleeease? i'm feeling rather desperate right now.....thanks.
imac G5 20inch Mac OS X (10.4) airport card fitted, 1.25gig mem.Hi ino,
My suspicion is that you have serious hard drive directory corruption caused by the crashes when using azureus.
First step is to see whether you can boot up from your Mac OS X DVD . Put it in the drive while its on, and start up the computer again while holding down the "c" key. The computer should now start up from the DVD.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar (which menu it is in depends on which version of OSX you are using).
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed try restarting the computer.
If it still doesn't work, you may have to try an "archive and install", while booted from the OSX DVD.
Be very wary with software like "azureus".
Cheers
Rod -
Ok, so running Lion on a MacBook, (2010 i think) and the OS got corrupted(stuck on spinning wheel and grey screen on boot)
Tried to repair the disk via disk utility using an install CD, no go, couldn't repair, so, did a clean install.
New install went fine, computer worked for about 3 days and then stuck on the spinning wheel again.
suspecting physical damage to the harddrive, I installed the OS to an external, and booted from there. Worked for a couple days and then stuck on the spinning wheel.
I have repeated the process 5 times now, each time it works for a little and then craps out again.
What's going on?
as a note, when I say it gets stuck on the spinning wheel, I have left it for 12 hours trying to boot to no avail.The Apple Hardware Test doesn't always detect all errors.
Next time you get the gray screen/spinning wheel, try booting into the Safe Mode to see if it will boot.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
Startup Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)
Maybe you are looking for
-
SAles Order not appearing in Sales Data Warehouse SAles Order List
Hi Gurus, Can you help me in this regard :- My Sales Order has been invoiced but its not appearing in the Sales Data Warehouse Sales Order List.
-
Hi all I need to fetch the mail date during the processing with mail sender adapter. I can't find a relevant field in the Adapter-Specific Message Attributes (SHeaderFROM, SHeaderTO etc.). Do you know how to fetch the mail date during the processing
-
LDAP synchronization with third party directory server
Hi, In release 2 I have created a java program, that synchronizes a MS Active Directory (and other LDAP compliant directorys) and the OID, with the purpose to maintain Portal users and groups automatically. Often the tree structure in the third party
-
"Exception in thread "main" java.lang.NoClassDefFound: classname" error.
Here's my code: public class Hello public static void main( String[] args ) System.out.println( "Hello!" ); it compiles but it wont run. it encounters this error: " Exception in thread "main" java.lang.NoClassDefFoundError: Hello" Since I am using jd
-
I download Adobe Flash but it doesn't install. Each time I encounter something that needs Adobe Flash it tells me I don't have it. I am getting tired downloading it and then it isn't there.