Green and Orange LEDs blink after each other - what does this mean?

It won't show up in iTunes, it won't show up in Windows Explorer, and it won't show up in My Computer. Everything else is fine, but it keeps saying "USB Device Not Recognized."
What should I do?

If it helps, when I plug the shuffle into the PC, a balloon appears that reads, "USB Device Not Recognized."

Similar Messages

  • My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk.
    http://support.apple.com/kb/PH5836
    Reset PRAM.
       http://support.apple.com/kb/PH14222

  • My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

    My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

    It means a valid system cannot be found. You need to reinstall OS X.
    If you have Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you have Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

    apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

    You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Powerpoint Mac 11.3.2 version converting to Google Docs Presentation, I'm told I need Quicktime and a compressor to view images. What does this mean?

    Starting with files in
    Powerpoint Mac 11.3.2 version converting to Google Docs Presentation, I'm told I need Quicktime and a compressor to view images. What does this mean?

    Were you using third-party software when the panic occurred? Is the panic repetitive or it just happened once? IN the latter case it could simply be a software glitch. But if it's repetitive then there's some other problem either hardware or software. Use the Console application in the Utilities folder and review the console log around the time of the panic to see if there are additional clues to the cause of the panic.
    The error indicates that the problem was a failure to respond to an interrupt by the CPU. Now this could simply be caused by a software glitch, but it could be a hardware problem related to the CPU. In the latter case the panic would probably become repetitive, in which case you would want to take the computer in for service to be sure the CPU isn't failing.

  • I have a scanner and i get the error code:201 what does this mean?

    i have a scanner and i get the error code:201 what does this mean?

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • I need to reinstall OX and my iMac only shows backup drive what does this mean?

    I need to reinstall OX and my iMac only shows backup drive what does this mean?

    Your hard drive has probably failed.

  • I just tried to purchase a song and incountered an error msg. 5002 what does this mean?

    I just tried to purchase a song and incountered an error msg. #5002 what does this mean?  I'm new to using itunes.

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the corrupt tracks from the music section of your iTunes library, close & then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
    See also:
    HT5085 - iTunes in the Cloud and iTunes Match Availability
    HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • HT4060 i just bought a ipad and just like two hours ago and my ipad is saying "not charging", What does this mean?

    i just bought a ipad and just like two hours ago and my ipad is saying "not charging", What does this mean?

    Go ahead and sync. You have plenty of battery to get that done.
    USB pours do not provide enough power to charge an iPad efficiently. Once you finish your sync go ahead and use your iPad. Put it on the charger that came with it later.

  • TS3694 I'm trying to retore my wife's iphone and got an error3002....what does this mean and how do I resolve error??

    I'm trying to retore my wife's iphone and got an error3002....what does this mean and how do I resolve error??
    Leo

    error 3002 http://support.apple.com/kb/TS3694#error3002

  • My Power Mac G4 booted from an OS 9.1 install CD, and then froze up.  Now I turn the machine on, beeps 3 times, power button blinks 3 times.  What does this mean?

    I tried to install Mac OS 9.1.  I turned the computer on, heard the bong noise (although with some static), and inserted the OS 9.1 installation CD.  It started to boot, but froze up.  I rebooted the machine, and the same thing happened.  One more reboot, and i get 3 beeps and the power button is blinking.  What does this mean?

    Hi, it indicates a RAM problem, (or Logic Board around the RAM).
    The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
    If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
    1 beep  = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
    Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
    http://support.apple.com/kb/ht1547

  • TS1717 When I click the itunes icon on my laptop and error message appears "new itunes library" What does this mean?

    I can't open Itunes. It just says "new itunes library" and closes. What does this mean?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • In cluster Manager there are no services and application listed on a node.. what does this mean?

    In Cluster Manager I can see two nodes listed.
    When I click on the first it lists the two SQL Server instances.
    On the other node there are no services and application listed....what does this mean?
    Mr Shaw

    Yes Instance A and Instance B will also be installed in the second node.
    Just go to configuration manager in the other node, you will see those instances in stopped state.
    Assume I install Instance A in a 2 node cluster with node A and Node B, it installs instanceA binaries in both nodes, What it does when failover is shutdown Instance A in Node A, move the disks to node B and start the instance A in the node B. Its basically
    the same instance.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
    Oh I get you.. 
    The missing bit on the puzzle is that the binaries are installed on both nodes at the same time.
    Thanks,
    Ben
    Mr Shaw

  • HT4623 I cannot turn on my i pad. all I have on the screen is the i Tunes logo and a picture of the connector. What does this mean? Is it still updating or do I have to connect to i Tunes via my PC?

    I am unablre tpo bring up my home screen. All I get is the i-Tnes logo and an image of the connector lug with an arrow pointing to the logo. What does this mean? Is it try to tell me that I need to sync? This has only happened since the IOS 7 update started.

    It sounds like it's gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect it to your computer's iTunes, and you should then be able to reset the iPad and restore/resync your content to it

  • Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. ..what does this mean?

    I did a repair and this came up afterwards...what does it mean?

    Not sure what it means but it's safe to ignore. Here's a list of messages that can be disregarded:
    http://support.apple.com/kb/ts1448

Maybe you are looking for

  • How do I stop syncing voice memos to iTunes on Windows?

    I want to delete my voice memos on my Windows computer (to free up disk space), but leave the voice memos intact on my iPod. How can I accomplish this? (iTunes says that when I delete from my computer, the memos will also be deleted from my iPod, whi

  • Using javascript to change the "Overall Result" cell in WAD

    Hi experts, I am trying to use javascript to change the text of the "Overall Result" cell in my web template using BI 7.0. I am not familiar with javascript, but I this is what I have done so far. I dragged the web item "Script" into my web template

  • How to setup a Provider topology using OSPF as IGRP for P and PE routers

    Hi, I am trying to create a typical provider topology in GNS3. I would like to know what IOS to use for the: - P routers - PE routers Also the minimum Hardware to use for: - P routers - PE routers I am also going to use OSPF for the IGRP on the MPLS

  • [SOLVED] Mapping a compose key in console

    I am trying to successfully (re)map the keys for the console to turn the right control key into a compose key. Please note, this is for the CONSOLE. I already have it working in X using Xmodmap. Although this is specifically about a compose key, it s

  • How can validation list/menu

    Hi, I am created a form, i want to validation to list/menu (job_code field is mandatory). Anybody enter without a Job_code form submission is not happend. I am try to validation in dream weaver behavior- validation “field is not display list/menu id”