Green and pink Media. Premiere Pro CC v.8.1

Hi,
i have a problem with my media.
i use XdcamHD 422 50i .mov clips. and one bin with IMX codec.
the sequece setting is Sony xdcam HD422 1080i
but two days ago all the media with the IMX codec went green and Pink, audio is still ok.
in the import panel / Finder ecc. also in Bridge all clips look fine but when they are in Premiere the turn out pink&green.
i tryed to reimport all IMX based media new --
to set the media offline and reconect them new.
delet all reder - and Preview files.
im using OSX YOSEMITE
Premier Pro CC 8.1
XDCAM DRIVER are updated and working.
does anyone had this problem or know how to solve it???
thx #
Stephan
XDCAM HD 422 50i . mov Clips works fine.
XDCAM IMX Clips are all green and Pink.
in the import window, all clips are looking good.

HI!
I´m having same problem with quicktime files from newtek. When imported they are all green.
I tryed to import in other softwares and looks fine. Even in Premiere CS5 is OK with Maverick.
I think the problem is Yosemite with CC. Must have some issue with codec orsomething.
Many people are having problems since yosemite upgrade! Whats going on with codecs?

Similar Messages

Does new Premiere Pro CS 5.0.2 update solve hangup when clicking in and out of Premiere Pro?

I originally ran into the problem with Premiere Pro CS 5 (as part of the Production Premium CS 5 package) whereby on large projects, particularly with P2 media, Premiere Pro would hang up every time you clicked in and out of the application. What I mean by this is when you click your desktop or explorer or some other application, outside of premiere pro, and then you try to go back to premiere pro and click inside the application to get back to work, you get a blue wheel and it takes 10-30 seconds before premiere pro will re-engage and allow you to work.
I have installed the new 5.0.2 update and tested it on my original problematic project, having set up a new media cache file. The project prpro project file size is approx 30 mb and the reference media is approximately 300 GB on internal hard drive. The full data on the original problem,specs and tests can be found on this form at
http://forums.adobe.com/thread/639220?tstart=0,
Unfortunately, in my initial work and test with this as of today, this problem is not solved and the same hang up is occurring. When testing I have all other applications turned off, no internet connection and no firewall/anti-virus programs running (system mechanic).
I will be working extensively over the next few days with a new editing project and will reduce the project size and will report back if there are in fact any improvements or changes to this, but at this writing, this problem is not solved for me unfortunately. Possibly for others there is an improvement.

You know what it didn't work for me - but - and I only discovered the solution last night by happenstance - I wasn't trying all that hard to solve it as it wasn't as bad for me as apparently it is for you and others - but - anyway - for me the solution was my anti virus - I had it turned off when I installed the update - so once it was completed it appeared the problem had been solved by the update - but - then I turned the anti virus program back on - Avast free version BTW - and the problem was back - it was then I happened upon your thread and obviously I put two and two together - so - continuing - I have just now uninstalled Avast free version and installed AVG free version and - viola` - all is good - for now. Sorry to hear you are still suffering.
That has been my only nagging issue thus far with CS5 - all else - so far so good.
Best wishes,

Videos Showing Green and Pink (Preview and Export)

I've imported a series of MTS videos. In the timeline - the color is fine. In the Source/Program monitors, they get a weird green and pink overlay. Any thoughts?

When I converted with Media Encoder to MP4, it still happened.
After reading all the posts, here's what I did: emptied the Media Cache in
PP, then downloaded PP '14
It went away, for whatever reason
On Tue, Jul 22, 2014 at 10:37 AM, JPellizzi <[email protected]>

Project Bloating and Repair in Premiere Pro CS6; Max Project File Size? Adobe Coders Welcome...

Greetings.
After a few browsing sessions, I haven't found direction for a specific problem within a project bloat. First and foremost; we're always backed up. I have a restoration copy of the project that I will reference herein. Check that off the list.
Numerous people have posted here and around Creative Cow with problems regarding an expanding file size using CS6; watching files go from 300mb to 2.8gb. The unfortunate problem is when the project crosses a magical line that results in an inablity to open, import, export, or access sequences contained therein. Has anyone addressed a solution to repairing Premiere CS6 save files? Reducing file bloat? I haven't seen anything (recall the FCP7 repair days... solutions existed because problems were frequent; thankfully not so bad with Adobe).
Does anyone inside the code size know the maximum project file size that Premiere can read? I created a monster... Over 200 sequences utilizing 4.5TB of footage, stretching from Red codecs to EXCam to MPEG4 and H264. And for some time, the project size was manageable. Then, it inflated. And one day, randomly stopped opening. None of the auto-saves open.
Just curious. Files aren't the problem, but the 2.8GB save file is. Machine specs // etc. are openly available if required; no bad ram, no problems with all projects (just this one beast).
Cheers,
Jon Michael Ryan

REALLY_ Mac has a history of being more stable than PC with Premier ...
Pastor Bernie
International Evangelism Coordinator
Global Teen Challenge
visit us on FACEBOOK (http://www.facebook.com/bernie.gillott) or on
twitter-just tweet globalcry
~~~~Pray Big or Stay Home~~~
www.bgillott.org (http://www.bgillott.com/)
426 Newport News Ave, Hampton VA 23669
Phone (757) 728-0347 cell (757) 218 8499
In a message dated 6/2/2013 5:50:50 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Project Bloating and Repair in Premiere Pro CS6; Max Project File
Size? Adobe Coders Welcome...
created by joe bloe premiere
(http://forums.adobe.com/people/joebloepremiere) in Premiere Pro - View the full discussion
(http://forums.adobe.com/message/5373302#5373302)

How to use .MKV and .ISO with Premiere Pro? They are not supported.

Hi all. My brother in-law sent us two .mkv videos and a DVD .iso he wants me to use in a video I am cutting for him. The only trouble is, I've no idea how to get them into a format PremPro can handle.
I've searched and the only solutions I have found are infinitely complicated for me. Avisynth is certainly beyond me.
Anyone know of a way to convert .mkv (info lists 942x720 H.264 4:2:0 YUV MPEG4 AVC) into something useable?
Same question for an ISO file.
Thanks much
By the way, this is not for anything 'important' nor am I getting paid, so I have no budget tp purchase software. I am sure there must be a free solution.
I tried this trial version software...
http://www.moyea.com/import-flv/
But it would NOT install. It just errored in a loop and was unable to find or understand I have CS5 PremPro.

Can anyone explain how to use VLC to transcode? The settings are endless and NONE look correct. Everything is about coverting and shrinking and that is not what I want.
I have looked into this so many times and cannot find how to do it. I know it must be simple, but clearly I am blind.
What I need is to take whatever is inside that stupid MKV wrapper and extract it. Transcode it. I have been trying for A YEAR now and have never been able to find a solution.
I'm on a PC and unfortunately, there are free solutions for a MAC. But that won't help me.
EDIT: One option I see is tsMuxer! But which setting for Output? I can choose...
TS muxing... or M2TS musing... or Blu-ray disk... or AVCHD disk... or DEMUX
To explain more, I have a Blu-Ray I purchased and want to add the audio from my laserdisc, since the remixed audio on the disc sucks (hard). I'll also add English subtitles. To be clear, this work is for ME for my own personal use.
Here is a screen grab from tsMuxer. Which to choose? I will place the audio and video in Premiere Pro. Sync the old Laserdisc audio up and then EXPORT to Adobe Encore to burn a new BD.

What's New and Changed in Premiere Pro CS5.5 - Free Course!

Hi All,
I just wanted to point out some new video training, totally free of charge, called, "What's New and Changed in Premiere Pro CS5.5." Todd Kopriva flew all the way to Austria's "Video2Brain" studios to record these detailed tutorials and I think they're very good. Have a look gang, and see what you think!
Link: http://www.video2brain.com/en/products-117.htm#/content?t=2

Thanks, Todd, much appreciated. Such information is always welcomed by all users (at all levels), I'm sure.

My ipad screen turned green and pink

my ipad screen turd green and pink help me plssssss.
i restart my ipad2 it dosen't work

Hey jedivan27,
Thanks for the question. I understand that you are having display issues with your iPad 2 and you have already attempted to restart it. To completely isolate the issue, let's try resetting your device as well:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists after a reset, let’s see if we can isolate to software or hardware by backing up and restoring your device as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

Pushing and pulling from Premiere Pro CS 5

Hi,
Recently, I came across a problem and I was wondering if you could confirm this is a limitation within Production Premium CS 5 or whether I am doing something incorrectly?
If I render a sequence within Premiere Pro and push it to Encore via Adobe Dynamic Link, the rendered sequence correctly shows its rendering within Encore. However, if I render my sequence, save, and exit from Premiere Pro and then start Encore and pull the sequence from Premiere Pro via the Adobe Dynamic Link, I don't necessarily keep the rendering. I know that this has happened when using a 64-bit plugin from a third-party. The sequence shows with a watermark as if it had never been registered. The problem further manifests itself by, when I restart Premiere Pro, while the rendering looks intact, if I click on the third-party plugin as if to modify it, it won't let me make changes until I delete the already rendered sequence. It seems like somehow, the sequence has become corrupted.
Any thoughts - is this a known problem? Has this been addressed with CS 5.5? Are there plans for this to be addressed? Is there a workaround?
Thanks,
Steve

JSS1138 wrote:
The pros are faster encodes with superior quality. I use the free HC Encoder for MPEGs. You'll also need Avisynth to use it. The process is somewhat cumbersome, but if you have the time and want the quality, it's noticeably better, in my opinion.
To add to this, I've been producing commercial blu-rays using the free x264 encoder. The quality is unmatched by any commercial encoder, however there are some features absent that some commercial producers need (such as the ability to directly place I-frames, re-encode a section of GOPs with different bitrate targets, etc. which commercial encoders like CineVision can provide). If you don't have any need for those, x264 is the way to go. As quality is more important to me than bitrate, I use the single-pass constant ratefactor "--crf" mode with something better than the default, like 18 or 16, and it has never let me down.
Just be prepared to wait a while if you have a longform project. x264 is very fast, taking advantage of multi-core machines, but it cannot utilize the GPU/CUDA for encoding. A 3.5 hour 720p60 project (over 750,000 individual frames) at maximum quality takes a full 24 hours to encode on a 3.2GHz core i7, with all hardware threads at 100% (so make sure your machine is stable if it is overclocked!).

Can I buy and download adobe premiere pro at home and then use that DMG to install it in my office?

Have just purchased a beast of a Mac Pro. Will be using this for editing a feature film. Problem is I need to buy and download Adobe Premiere Pro. My internet speed in the office is abysmal and it would take forever to download. Thats why I was thinking of downloading the software at home, and then using that DMG file to install on the Mac Pro in office. Is this possible? Will appreciate any help at all.
Thanks!

You can download the Enterprise Deployment packages and install them, but you still need to install the CC app in the first place.
Mylenium

Where can I download and install Adobe Premiere Pro CS4

Hi
I would like to know where can I download and install Adobe Premiere Pro CS4. Would you send me the link install imm please??
Thanks

Check this link , it may help
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Please do read the instruction properly , do avoid the error "Access Denied"

When I plug in the VGA adapter the colors change to green and pink on the screen

When I plug in the VGA adapter to my new MacBook Air, even without connecting the other end to the lcd projector, the screen colors on the computer change to green and pink

As Stated above...
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
If no joy... Try here > DFU Mode

HT201210 Why are my ipad colors are all green and pink?

Why are my I pad2 colors all green and pink?

Because something is wrong.
To fix, try:
- A reset. Nothing is lost
Reset : Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings.
If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My video won't "Render and Replace" in Premiere Pro from linked footage in After Effects

I am using Premiere Pro CC 2014 and After Effects CC 2014. I can't get the video to "Render and Replace" in Premiere Pro after editing the original in After Effects. It just freezes on "Analyzing."
In order to see the footage in real time I have to export it to an mp4 then replace the linked footage. The footage is 18 minutes long and it takes more than 5 hours to export it. After I edit the exported version, I have to export it again, which is another 5 hours. This is taking a really long time. I would rather edit the "Rendered" version What am I doing wrong?
Russell

is this just a single clip, or you have the entire 18min loaded in AE as comp? does this happen with new projects and all footage or just some? can you render and replace regular clips that aren't AE comps? if its just a few clips of the 18min project, can you render previews in premiere? if its just a few clips, could also render them out in AE and swap them out in premiere instead of using render and replace... or maybe temporarily disable the ae effects/layers while editing in premiere and then turn them back on when ready to export final render.

Pixelated Screen - shimmering green and pink

I posted this over in the display forum but im not getting much help over there. thought i would post here and get a bigger crowd.
anyways, on my ibook, the screen is very pixelated. it reminds me of when you put a video card in a pc and there are no drivers installed for it. there is a shimmering green and pink effect all over the screen. mostly in the shadows though.
i have already tried to adjust the resolution and colors. nothing changes the way it looks. current setting is at 1024x768 with millions of colors selected.
i took a screen shot and transferred it to my pc and opened it in Photoshop. The screen shot looks flawless and none of the above symptoms are there.
so is the LCD bad? maybe the inverter?

If you have the external video adapter, as included with the iBook when new, you could check the non-LCD
components to some extent by seeing if you can run an external display; and if the images view correctly,
the internal display has secondary issues that can be further troubleshooted by you or a tech.
There are some software utilities out there which may work to help use an external display; but I don't use
them and so can't recommend them. A few were not supported officially, but people used them in iBooks.

Image Manipulation is making green and pink thumbnails

Using the coldfusion 8 image manipulation we are getting thumbnails that the colors are all green and pink. This seems to only affect the thumbnails and not the larger resized images. See screenshot for example. Any ideas why this is happening or how to fix it?
The functions being used are ImageWrite and ImageScaleToFit.


<cfparam name="jpgQuality" default=".8" />
<cfparam name="defaultInterpolation" default="bicubic" />
<cfparam name="defaultBackground" default="black" />

<cfparam name="thumbMaxWidth" default="" /> 
<cfparam name="thumbMaxHeight" default="60" /> 
<cfparam name="thumbQuality" default="1" /> 
<cfparam name="thumbFixedSize" default="false" /> 
<cfparam name="thumbBackground" default="#defaultBackground#" /> 
<cfparam name="thumbInterpolation" default="#defaultInterpolation#" /> 
<cfparam name="normalMaxWidth" default="476" />
<cfparam name="normalMaxHeight" default="324" />
<cfparam name="normalQuality" default="#jpgQuality#" />
<cfparam name="normalFixedSize" default="true" />
<cfparam name="normalBackground" default="#defaultBackground#" />
<cfparam name="normalInterpolation" default="#defaultInterpolation#" />
<cfparam name="zoomMaxWidth" default="670" />
<cfparam name="zoomMaxHeight" default="380" />
<cfparam name="zoomQuality" default="#jpgQuality#" />
<cfparam name="zoomFixedSize" default="true" />
<cfparam name="zoomBackground" default="#defaultBackground#" />
<cfparam name="zoomInterpolation" default="#defaultInterpolation#" />

<cfparam name="originalFolder" default="path to folder for original images" />
<cfparam name="thumbFolder" default="path to folder for thumbnail images" />
<cfparam name="normalFolder" default="path to folder for large images" />
<cfparam name="zoomFolder" default="path to folder for large resized images" />
<cfparam name="watermarkImage" default="" />
<cfparam name="wmXPosition" default="50" /> 
<cfparam name="wmYPosition" default="65" />
<cffunction name="genWatermarkImage">
    <cfargument name="ImageFile" required="true" />
    <cfargument name="MaxWidth" required="true" />
    <cfargument name="MaxHeight" required="true" />
    <cfargument name="StorePath" required="true" />
    <cfargument name="FixedSize" required="true" type="Boolean" />
    <cfargument name="Background" required="true" />
    <cfargument name="Quality" required="true" />
    <cfargument name="Interpolation" required="true" />
    <cfargument name="AddWatermark" required="true" type="Boolean" />
    <cfif IsImageFile(originalFolder & ImageFile)>
        <cfset original = ImageNew(originalFolder & ImageFile) />
        <cfset originalHeight = ImageGetHeight(original) />
        <cfset originalWidth = ImageGetWidth(original) />
        <cfset outfile = StorePath & ImageFile />
        <cfset watermark = ImageNew(watermarkImage) />
        <cfset ImageScaleToFit(original,MaxWidth,MaxHeight,Interpolation) />
        <cfset new_w = ImageGetWidth(original) />
        <cfset new_h = ImageGetHeight(original) />
        <cfif FixedSize>
            <cfset normal = ImageNew("",MaxWidth,MaxHeight,"rgb",Background) />
            <cfset ImagePaste(normal,original,int((MaxWidth-new_w)/2),int((MaxHeight-new_h)/2)) />
            <cfif AddWatermark>
                <cfset ImagePaste(normal,watermark,( int(ImageGetWidth(normal)) - int(ImageGetWidth(watermark)) -3),( int(ImageGetHeight(normal)) - int(ImageGetHeight(watermark)) -3) )/>
            </cfif>
            <cfset ImageWrite(normal,outfile,Quality) />
        <cfelse>
            <cfif AddWatermark>
                <cfset ImagePaste(original,watermark,( int(ImageGetWidth(normal)) - int(ImageGetWidth(watermark)) -3), (int(ImageGetHeight(normal)) - int(ImageGetHeight(watermark)) -3) )/>
            </cfif>
            <cfset ImageWrite(original,outfile,Quality) />
        </cfif>
    <cfelse>
        <cfreturn "Image file not an image!" />
    </cfif>
</cffunction>
<cfset thumbError = genWatermarkImage(Filename ,thumbMaxWidth,thumbMaxHeight,thumbFolder,thumbFixedSize,thumbBackground,thumbQuality,thu mbInterpolation,"false") />

Green and pink Media. Premiere Pro CC v.8.1

Similar Messages

Maybe you are looking for