Green band on bottom half of frame

I have encoded from a QT file (all looks and plays fine) in DVD SP and I get an encode and finished DVD with a bright green band over the lower half of the image. Any ideas what might be going on?
Thank you.

Hello , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I understand that you are having an issue with the bottom half of your screen, and wanted to assist you! Unfortunately, it sounds like the screen may be damaged. You could try replacing the screen yourself. If so, here is a document that can help you:HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC - Maintenance and Service Guide (Chapter 6, Page 88-96). If you do not feel comfortable with replacing the screen yourself, then you may consider contacting HP Phone Support for additional options. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Similar Messages

New video clips only show bottom half of frame

Video clips shot with my new video camera only show the bottom half of the frame in Premiere Elements 3.0. Older video clips show up just fine.

goshawk28776
You say that this 1/2 video display is related to video from your new camera and Premiere Elements 3.
The problem of the 1/2 video display has been associated specifically with .wmv format and a recent Windows Update kb file.
But, I would ask, just whar brand/model camera do you have that is shooting .wmv video?
By the way, what computer operating system are you running Premiere Elements 3 on....Windows 7 32 or 64 bit or Windows XP 32 bit?
The Announcement that we have post at the top of this forum is as follows:
Announcement: Windows Update Causes Half of Display to Be Blacked Out
Hide Details
MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
"MS bulliten MS13-057. Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
For us, it occurs when decoding WMV9 files. Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
You can uninstall these windows updates to resolve your problem."
There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
This notice suggests deleting Windows Update kb 2834904 for Windows XP, and Windows Update kb 2803821 for Windows 7. So, please let us know your situation and whether any of this applies to you and whether your problem was solved by taking one of these actions.
Thank you.
ATR

My Apple TV is locked on a screen with the home sharing and settings icons in the bottom half of frame and won't let me go back to main menu.

Apple TV locked on screen with settings and home sharing icons in bottom half and won't let me move back to main menu. Anyone know how to fix it?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

Burned DVD bottom half green from .avi videos

Hi, I have Vista, Pavillion a1700n and use Windows Movie Maker and DVD Maker. No problems in the past but I now have a new video camera. These are .avi files. Went through a whole lot with Microsoft and codecs to get them to work. Files play fine but when burned the bottom half is green. Old videos burn fine. I use DVD +R. Any help would be appreciated!

Hi,
Try downloading and installing Avi2Dvd. This is a freeware application, but works very well for what you require. If you have any questions regarding this, please let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When capturing video; how do I get rid of the green lines at the bottom of the frame?

When capturing video; How do I get rid of the green lines at the bottom of the frame?

s.haider
You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
And, the general drill for all users of Premiere Elements 8.0
a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
b. Are you working from the 8.0.1 Update version of the program?
Please consider.
We will be watching for the outcome.
Thank you.
ATR

Iphone 5 LCD screen green lines and bottom quarter all black?

Hi all,
Over the past few days I have noticed green lines running thorugh my iphone 5 screen , it got really bad last night so I turned the phone off for a bit and put it on the charger came back after an hour and now it's got much worse. The green lines remained; however the bottom right corner has now gone completely black (sometimes it's green)
Bottom half of the screen now not longer works meaning that I can't swipe to unlock. Does anyone know what could have caused this? Can this be fixed and how should I got about fixing this? How much will this cost me?
I've only had the phone about 8/9 months so pretty disapointed.
Any advice would be really appreciated.
Thanks so much,
Laura.

for an out of warranty iphone 5 at the apple store could be at least $200 and some change..

FF updated something so that history takes up whole bottom half of screen; I cannot surf, or even see start menu. I cannot change menu items so that I am asked before something is downloaded and uopdated automatically. These were NOT my settings!

My browser was very slow, so I cleared cookies and cache. When FF (4.0) restarted, it said it had installed colourful tabs (which I ALREADY HAD). I opened FF and typed in mmy first TE on my list ( I surf traffic exchanges). But I cannot do so on FF anymore. Only half my computer screen is from the TE or web page, and the bottom HALF of the screen is for History, etc. I cannot even see or access the Start menu or my open tabs at the bottom of the screen, unless I use Control and Escape.
I got the url from FF 4.0 , uninstalled the old version and reinstalled it. Same thing. I uninstalled it again, straight from my control panel (Windows Vista Home Premium), cleared cookies and cache again, fixed registry problems again, and restarted my computer. STILL same thing!
I tried to adjust settings, but it will not let me change what I need to. I cannot unclick that updates will be downloaded and installed automatically, and check that I want to be asked each time. I do not know if I can even SEE what was updated, to give you an idea if that could have caused this very nasty problem. Nasty, because until it is fixed, I will not be using FF.

After following all the instructions given, I poked around safe websites as suggested. I am not sure why this step was needed, as websites functioned rather normally before I came here but I did it anyways and found that the websites still work the same as they did. I can still do everything I used to be able to do. I see no change in the function of the websites.
However, I still cannot resize, close, or move the browser window. I don't know if Netflix is a safe site or not (too many conflicting opinions on that one from the masses) so I don't know if the issue with the vanishing buttons is still there, but all the issues I had with the browser window itself is still there.
Even in safe mode the browsers three window control buttons on the top right refuse to let me use them and the window itself will refuse to be moved around.

Video playing issue - Green Band on top of the screen

I am getting this type of green band repeatedly on YouTube video's in IE 9 on Windows 7 64 bit if Nvidia is engaged. Not with the Intel graphics. I have removed Flash but it won't play or display therefore it using Flash 64bit is installed. I was not able to repeat the problem with Chrome. But lately I can't seem to get Chrome to call on the Nvidia GPU even though its selected in Nvidia Control panel. I ran the 32bit IE 9 or 64bit but the Flash will only install the 64bit version even though I tried to manually install it. (Adobe says that both are built into the same download and only applies the one). Chrome runs the video without Flash installed. Weird there!
I've spent a lot of time already and need to get other work done. Anyone see this problem?
Is there a Nvidia GPU/memory diagnostic utility? I am wondering if its GPU fault. I did not see this before and I know my MB was replaced from before. I am not getting this on MSN.CA video's.
Thanks
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

I did not think so.
I am also getting this with IE 9 and its a long documented issue although nothing in the last few months. All 2011 posts.
This is a new image I got done at Lenovo so eveything was fresh.
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 9.0.8112.16421
Application Timestamp: 4d76255d
Fault Module Name: nvwgf2um.dll
Fault Module Version: 8.17.12.7658
Fault Module Timestamp: 4f53bc01
Exception Code: c0000005
Exception Offset: 0005ad3d
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 8b6d
Additional Information 2: 8b6d235a555f35a3ed0bd60e5521c68c
Additional Information 3: 3248
Additional Information 4: 324805dfa1463962b35de7833a40d76a
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

After screen replacement, top half of screen starts by looking normal but then fades to black while bottom half stays bright but with images blury. What might went wrong?

A friend recently gave me their old Macbook pro 15 because they broke the screen and the Apple store quoted them $500-600 to fix it. I looked online and bought a screen of ebay for $170 in hopes of fixing it myself. After getting the screen I hooked it up using the steps I found online. Sadly when I turned it on, the top half of the screen was working apparently normally, but then it faded to black. The bottom half stayed bright with color the whole time but the images were always blurred. When I close the screen with it on, then open it after turning the computer on, the top half lights up with my desktop images as if it is working fine but then fades to black. The bottom is still blurred the whole time. What all could be wrong? Display cable, Inverter cable, not registering the screen or something, the screen is bad? I don't now a ton about all this and I have learned most of what I know from online research. I am not sure if I should send the screen back or if there is another issue. I just want to fix this thing.

Unfortunately, you don't even know the lower half of the computer is working properly, because you didn't have it until after it had been abused. So forget the attached screen for the moment. Connect an external monitor to it, fire it up, and see whether you can get a usable image on the external screen. If you can, send the defective "new" screen back for a refund, or replace the LVDS video cable first to make sure that's not where the problem lies, and if it isn't, then resort to sending the screen back. If you can't get a good image on the external, give the junk machine back to your friend and walk away.

My website only shows the bottom half of my page once uploaded to my cPanel direct from Dreamweaver CS5.

My website only shows the bottom half of my page once uploaded to my cPanel direct from Dreamweaver CS5.
Please see here www. cmenco .com
It has a slider and pictures above like the image below:
This does not show and I have tried everything.
Help will be appreciated.

Your slider images in the images folder on your site seem to be corrupted.
Are you on Godaddy hosting by any chance?

Bottom half of nano screen doesn't display

I've had my ipod for about a year and have had no problems. I keep it clean and protected and use it almost every week. But the last month i've been unable to access my laptop and thus couldn't charge my ipod. So i turned on my ipod after a month and i find a problem..
The top half of the screen works.. no problem.
But the bottom half? It lights up and turns white and there's a slightly tan bar too. Sometimes words kind of blur into the botom half if i scroll really fast. This is really odd, because that means the bottom half of the screen isn't broken, but looks as if it's frozen.
So, what can I do?
I'm out of warranty Is my ipod nano an ipod shuffle now?

Hard to say if shuffel or not, but first try to restore it using the five r's :http://www.apple.com/support/ipod/five_rs/
If that does not work, consider sending it in for service at a third party place. Do a search for ipod repair and you will find several. Some will diagnose your problem for the cost of shipping and then tell you how much it costs to repair.
It does not sound like the screen is broken, but you never know. If that turns out to be true, it is not that hard to change it yourself and for under 15 dollars U.S. Do a search on ebay, they come with instructions and the tools you need to take your nano apart. You will then need a philips jewelers screwdriver and you will be all set, or have a third party repair facality do the job for you. One way or another you will have a nano back again.

IMac G5 2.1 G Bottom Half of Display Doesn't Work

A friend of mine on 11/11/05 bought from an Apple Store an iMac G5 2.1 G. About five weeks ago the bottom half of the screen went out. The top half is fine, but the bottom half is shot. A week later he took it back to the Apple Store, and they determined that it would cost $1100 to fix, so he kept it and bought a new one for $1300.
He didn't have the three year warranty, but the person at the Genius Bar told him that he was twelve days late to get it fixed for free. I told him that he should go back to the store and pursue this, but he doesn't want to worry about it. Nonetheless, is he just the victim of bad luck, or does he have any recourse for a free repair?
Thanks - Somethingfromnothing

In other words, is there any way at all to somehow bypass the password and back it up to iTunes?

1 of the clips in my movie is cropped weird & you can only see bottom half.

Does anyone know how I can fix this?
I am putting a reel together with different footage and when I use the playback in Imovie 08 it is fine. However when I export it and I play it back, the one clip is only half in frame if that makes sense...
Can't figure this out. Any info would be appreciated!

Ok, so I fixed my problem, and this might help, if you haven't gotten it fixed already. I had the problem while making one of a series of movies with three sections: Titles, movie, then credits, as usual. My titles and credits were imported m4ps, complete in and of themselves, but the movie was built between them. When I tried to publish the movie, the aspect ratio did not calculate the middle to match the titles or the credits. However, if I exported the movie as an m4p, and then imported it, they all published correctly. Titles, movie, and credits all appeared in 16:9 ratio.

Apple Studio Display 17" darker bottom half

I have an apple studio display 17" as a second screen for my
MacBook Pro 15", somehow it has darker colors on the bottom half of it, don't know the reason, is it magnetized?
Please Help.

Sometimes those ports just die. Wouldn't be the first time.
Other times, it is the ADC connector that is the issue.
Try replugging the ADC connector.

Cannot Capture - HVX200 - Half-Sized Frames - P2 Card

When I set the hvx200 for tape recording it works fine but when I set it for P2 recording I get a message saying that the camera is sending "half-sized" frames and so cannot be captured.
Changing the tape mode to sp, as indicated in the error message, seems to be irrelevant, especially since tape mode works fine.

hi Louis
forgive my ignorance but what exactly is a Sony 1080i ? is that a camera or a deck or a monitor? Some camera's are switchable (can play and record both PAL and NTSC). If, for example, you have a Sony Z1U then you only need to switch it to PAL (50i) and you should be able to use that for capture.
cheers
Andy

Green band on bottom half of frame

Similar Messages

Maybe you are looking for