Green bar on top of screen-won't go away

After two calls b2b on my iPhone today, a green bar appeared on top of my screen with "Touch to return to call". I can't make the bar to go away. There's no caller waiting either. Please advise.

verbenadesign,
Have you tried making another call outbound?
If that doesn't clear it, and tapping it doesn't take you to a screen where you can end the call, try turning on airplance mode for 30 seconds, and then turning airplane mode off.
If it still has not cleared, try restarting the iPhone by holding down the power button and home button until you see the Apple logo.
Hope this helps,
Nathan C.

Similar Messages

  • First generation apple tv has lost its main menu bar on top of screen.  Also I am currently in language choice and my remote seems to be locked, is that possible and if so how do you unlock it?

    first generation apple tv has lost its main menu bar on top of screen.  Also I am currently in language choice and my remote seems to be locked, is that possible and if so how do you unlock it?

    You would need to go to an Apple Store (make an appointment) and take the phone, her father's original invoice when the phone was purchased, and a copy of his death certificate. Only with these will Apple unlock it. If you can't get these, the phone is permanently unusable.

  • Do Not Disconnect screen won't go away

    Yeah basically, whenever my iPod is connected to my computer the "Do Not Disconnect" screen won't go away, even though nothing is being sent out iTunes to my iPod video. I've even tried reseting my iPod and I added all my music back on it but it still displays this screen. There isn't even the swirling icon in the top left corner. This only seems to happen when iTunes is running. As soon as I hit the eject button in iTunes it goes back to the normal screen. It's been doing this for like 3 hours now. Help?

    If disk mode is enabled the do-not-disconnect will not go away and you must eject manually.
    Turn off disk mode and it will only say do-not-disconnect only when the iPod is actively synching.

  • My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

    My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

    Now iTunes will not recognize my phone as a device...

  • BLUE SCREEN WON"T GO AWAY ON STARTUP

    When I turn on my iMac, the blue screen won't go away so I can't enter my login. Does anybody knows what's happening? What can I do to fix it?

    Uninstall Windows.
    Seriously though, how long has it been on? I had the blue screen take 30 minutes once. Usually when it doesn't happen quick" though, I just force it to power off then back on. So far, that always works. Can't comment about whether I'm doing any damage though (though I've been doing it with PC's for over a decade )

  • Purple/Green bars appearing randomly on screen

    Hello
    Earlier today, purple/green bars starting appearing randomly on my imac screen. I managed to grab a screenshot of it.
    Sometimes it stops for a long time, and then it reapears for a bit.  Is there any way of fixing this?
    I am running OS X Mavericks 10.9.2 on a late 2013 imac.
    Processor:  2.7 GHz Intel Core i5
    Memory:  8 GB 1600 MHz DDR3
    Graphics:  Intel Iris Pro 1024 MB

    There is a one year Apple Hardware Warranty (three year w/AppleCare) on Mac's.
    You need to contact your local Apple Store or AASP and make an appointment to have it looked at.
    see > Apple - Find Locations

  • Iphone message 'return to call' at the top of the screen won't go away

    I was on the phone when I received a text message and the iphone had the green strip at the top that said 'touch to return to call' so I touched it and it returned to the call but now the green strip with the message won't go away. Any suggestions? Do I have to go on itunes and return the iphone to factory settings? Will I lose all of my data if I do? Any help would be greatly appreciated!

    Basics from the manual are:
    Restart.
    Reset.
    Restore.
    Have you tried these?
    http://support.apple.com/manuals/iphone/

  • Blank bar across top of screen

    With the advent of LabVIEW 2013, my applications have a blank bar across the screen, above the menu bar, when they are executed.  I have not found a way to get rid of this bar.

    Attached is a screen shot showing the blank white bar across the top of the application.  If I minimize the application and restore, the bar comjes back as black instead of white.
    I am using Windows 7 on my laptop.  The target systems are WindowsXP SP3.
    LabVIEW 2013 shows this problem.  Not happening in LabVIEW 2012 SP1.
    Happens in Development environment and in the built EXE.
    Attachments:
    BlankBar.jpg ‏114 KB

  • Green bar on left of screen?

    I have just upgraded to FCP 5.1
    I was reorganizing an old project and it's files on an external Lacie Drive. When I opened the project a previously built graphic now appears with a green bar covering about a third of the left side of the frame. The graphic was built in FCP 4 and is made with three FCP titles. I have an mov file of an icon isolated on a green background which is green screen keyed over two cropped and composited photoshop BMP files. The graphic worked great when I originally posted it over a year ago. I don't remember why the icon is in the mov file over a green screen, but it used to work. Any ideas what the green bar means and how to get rid of it? I've re-rendered it all and it still appears.
    G4   Mac OS X (10.4.6)   1.42 GHz, 2GB Ram, Radeon 9800 Pro

    Imposible to tell from where I'm sitting, sorry. But if you've got the individual elements that allow you re-render, recompose the effect using different filters or a different codec. A lot has happened to FCP since your pixels were last crunched.
    Try this, set up a new, empty sequence and bring in just your green screen icon. You don't want to key it with green screen anyway so figure out a different way to do that. Export the graphic using Animation codec or as TIFF or PNG to preserve the alpha. IMport it. Is the line still there?
    Post back.
    bogiesan

  • I got about 5 green bars in iMac 27" screen. Can't boot again. Help!!!

    I was surfing web. Suddenly several green bars appear in screen. iMac reboot by its own. And never been able to normal boot again. Tried to boot while holding Shift was once successful. In safe mode ran Disk Utility to check for HD but said disk was ok. Static bars now in safe mode (I was thinking it was safe). Reboot again. Now I'm not able to boot even with the original boot disk holding C. Tried holding alt (opt) and selecting the disk but don't boot, it get freeze in white screen with colored bars while trying to boot. Really need help!

    I'm not able to boot even with the original boot disk holding C.
    Take your iMac to your local AS or an AASP.  Diagnostic testing is FREE!

  • Need Help - ipod video in trouble - white screen won't go away - help??

    White Scree appears and won't go away. Can someone help?

    Apple engineers have determined that this is caused by not allowing the firmware update to finish the installation before disconnecting the iPod. Try these steps.
    Reset the iPod.
    If the reset doesn't help, then put the iPod into forced disk mode.
    How to put the iPod into disk mode.
    Now connect the iPod to the computer. This step may immediately take you to the iPod's normal display screen. Reset the iPod to exit disk mode.
    If you still have the white screen, then you should use the updater to restore the iPod.
    Wait until the restore has finished before disconnecting the iPod. If you're unsure, wait at least 20 minutes (it's probably overkill but best to be sure). In my experience, the software updater for version 1.1.1 takes longer to complete the process than previous updaters.
    That should cure the issue.
    If however it doesn't, and your iPod is still non responsive (doesn't reset, nothing on the screen or button presses don't work), then it will have to be sent away for service.
    See: iPod service request.

  • The iTunes Popup Screen Won't Go Away On My iPod. Help :c

    There's an usb and the iTunes logo on my iPod and it won't go away. I've tried turning it off and back on but it still does it. Also, I've tried pluging it into my laptop and taking it out, as well as, "ejecting" manually on my iTunes window on my laptop, but nothing seems to work. Please Help Me Out. /:
    I don't want to restore it...

    The screen is telling you to restore the iPod via iTunes. You have to do that.

  • Hi there my 2 week old iMac occasionally mode won't restart by pressing mouse or keyboard or power on off switch even though green button at top of screen is illuminated the only way to get it to start is to powr off at wall then

    see title

    The green light at the top of the screen only indicates that the iSight camera is on.
    Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Also note that disconnection the power is not a good idea.
    If resetting the SMC does not solve the problem, then run the Extended Apple Hardware Test as per > Intel-based Macs: Using Apple Hardware Test
    or additionally make a appointment at your local Apple Store or Authorized Apple Service Provider >  Apple - Support - iMac - Service FAQ

  • How do I delete spinning wheel on top of program icon in menu bar at top of screen?

    I had LogMeIn installed on my iMac and it worked fine for a while.  Then the icon for the program in the menu bar at the top of the screen went gray.  When I hover the mouse over the icon a spinning pinwheel appears, so I can't click the icon to start the program.  I deleted the program and then reinstalled it, but the gray icon and spinning wheel never whent away.  Any thoughts on how to delete the spinning wheel would be appreciated.  I'm a novice on the IMac.  Thanks.

    Problem solved.  Placed Icon for Log Me In on dock and rebooted iMac.  Not sure why, but it worked.

  • Yellow/green line on top of screen while using back camera-3rd gen iPad .....explanation?

    When I use my rear facing camera, a line appears atop the top of the screen....and help?

    Try rebooting your iPad.  Press and hold BOTH the power and home buttons at the SAME for about 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You will not lose any data or settings.  If after you've done this, there is no improvement, it would be advisable to make an appointment at your Apple Store Genius Bar and let them see it.  If found defective, your iPad will replaced on the spot.

Maybe you are looking for

  • MacBook Pro mid 2010, Lion 10.7.2, still getting kernel panics

    Hi there, Just updated my MBP to Lion 10.7.2, with the big hope that this bug (the kernel panic - black screen that happens sometimes when switching from the Intel to the NVidia graphics card) was finally put to rest. It took me a little bit more tim

  • How to call excel macros programmatically in C#?

    Hi, I have a requirement where i need to call excel (2003) macros in C# program. Can anyone help me with a code snippet to do the same? The excel macro function takes two input parameters? how can the parameters be passed? Any code snippet to do the

  • Display sapscript form in Web Dynpro Java

    Hi, Is it possible to print an existing sapscript form i.e. PO from ECC to my Web Dynpro application? I have successfully created a Web Dynpro Java application to create POs but now have a requirement to display or print the PO? Can someone provide m

  • Problems Importing Slides / Captivate 3

    I have a series of 6 related Captivate projects, plus one I use as a template. Since there's some shared content, I need to be able to copy slides from one project to another, but I am having serious import problems. When I try to import slides from

  • HA SKU, HA controller ports down.

    Hi Friends, Hope you all are doing good. I have a situation.  I am deploying an HA controller for an already existing 5508 controller. I finished the configuration. tried enabling the AP SSO.  Some how it din't work well. HA went to maintenance mode.