Green "Call" button not working

When I click on a contact, the "Call mobile" button faded out and I can't make any call. I downloaded the current verion.

i found the anxwer;
http://community.skype.com/t5/Community-feedback/Explanation-on-Greyed-Out-Video-Call-Button/m-p/548...

Similar Messages

Iphone 4 home button not working, called never fixed, then cracked screen before bringing it back again, will they blame the cracked screen if i bring it back?

I bought an iPhone 4 less than a year ago, then one day the home button randomly stopped working, I bought the warranty so I decided to call in and see what was wrong with it. The girl said that restoring the phone would correct the problem which it did. But it is only a temporary fix, it happens more often now. So I was meaning to call in soon, but the other day my phone fell out of my pocket IN CASE from a foot height and cracked the screen. I nearly threw up. All the years I have had a phone I have never cracked or broken one, strongest screen my ***. Anyway, if I contact them again now will they fix the home button problem? or will they say that the cracked screen is obviously the cause of the home button not working? which it is not!! I don't care about the screen being cracked its not on the actual screen just on the side so its irrelevant to me. Plus I heard it is outrageosly pricey to replace.

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

IPhone 4 middle button not working

Having problems with the iPhone 4 middle button not working anyone else with the same problem ?
Thanks

i have the same problem. since you're software is already iOS 5.1 go to settings>general> accessibility>the settings after triple click home, i forgot what is it called but that would help.

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Caller ID not working on 8330 Curve

Does anyone know how to fix the caller ID on my 8330 curve. Incoming calls from my address book are coming in as "unknown number" - its only some of the contacts, not all. BB supprt and Sprint couldn't figure it out.
Thanks!

First, go into the Phone app (press the Green [Call] button), then hit the [Menu] button (button to the LEFT of the TrackBall) and select Options --> Smart Dialing. Make sure your Country Code and Area Code are set correctly.
Also, make sure that phone numbers in your Address Book entries are formatted like a phone number. The most standard format is:
+1 (123) 123-1234
for the US.
Jerry

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

Home button not working on iPad 2 after iOS5.1.1

I got iPad 2 updated with ions 5.1.1
It worked fine for a week and now the home button does not work. I followed all posts here to reset, restore etc. but nothing helps. This is already a replacement iPad I got for my previous non functional iPad 2 which had battery issues, which apple swapped in store last week.
Any advice ?

Update -
Called apple support and did not get steps to try and was asked to visit apple store. Went to apple store and since the problem is intermittent they did nothing.
Now the problem is back.
Also, I notice there are lot of Low memory diagnostics logs which I thik may be leading to home button not working BUT that iOS should handle as part of memory management. I restarted iPad 2 and still memory issue/ home button not working which seems weird
I am really disappointed and not sure how to get this addressed.
Apple, please help!

Help button not working on firefox.How to fix?

help button not working.

Hello,
Lets give Firefox some Tuneup.
The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
To Refresh Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
#Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you.

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

Cancel and Exit button not working

Dear Experts,
<u>Cancel and Exit button not working</u>
I am calling a screen from inside a report program
using SET SCREEN 9000.
2 of the date fields(start date end date)
on this screen are Mandatory.
I am not able to Come out of this screen 9000 using
CANCEL or EXIT button
without giving a date entry in both of
Mandatory fields (start date end date).
Can someone help me with a solution?
Appreciate your valuable help;
Points assured
Thanks,
Aby Jacob

Hi..
To avoid this problem you have to use AT EXIT-COMMAND Module.
1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
2. In the PAI of the Screen Call this module.
   MODULE EXIT_SCREEN AT EXIT COMMAND.
3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
   MODULE EXIT_SCREEN INPUT.
       CASE OK_CODE.
      WHEN 'EXIT' .
            LEAVE TO SCREEN 0.
      WHEN 'CANCEL'.
      ENDCASE.
   ENDMODULE.
This will surely work.
<b>reward if Helpful.</b>

As i have written,my iphone home button not working

as i have written,my iphone home button not working.i talk to cusmer care & also visit to care center in delhi. but they say to pay full mobile payment to repair it.
this mobile is onle 11 month old. the case id number for this call was: 325468510.

OK, thanks for sharing that information. Now, what it is you would like us, your fellow users and the only people who will reply to you here, to help you with? If you are expecting a reply from anyone who works for Apple here, you will not get such a reply. The only way to discuss any issue with Apple is to call them:
http://www.apple.com/in/support/iphone/contact/
Regards.

Is there a quality iphone headset cord extension that allows the music/call buttons to work?

Hi folks,
The open-style earphones included with the iPhone 4S work very well, but the cord is about 6" too short (deep pockets). I've looked online but am having difficulty finding a quality iphone headset cord extension that [definitely] allows the music/call buttons to work. Alternatively, are there other open-style earphones (as opposed to in-ear buds) that have the same music/call buttons and a longer cord?
Thanks.
Jeff

I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm

Green "Call" button not working

Similar Messages

Maybe you are looking for