Green flashes when rendering in Premiere CC 2014

Hi there,
I'm an in-house cameraman and editor for a financial business in London. I'm using the latest Macbook Pro Retina with 16gb ram, NVidia 750 graphics card. I've been using the same method for editing for past two years but have only just started editing with the very latest 2014 version of Premiere cloud. I'm mixing PM-100 and Sony EX1 footage which i've done many times before. However i've spend hours trying to get rid of green flashes that have started to appear on the renders.
These seem consistent with using the PMW-100 as the EX1 footage seems ok. I can replace the error clips with something else but then the render error moves to another part of the rendering.
These flashes can't be seen in playback within the editor, only after rendering.
I'm trying to work out if its the camera, camera drives, Macbook Pro Retina or Premiere.
Can anyone help shed light on this?
Andy

I was having the same problem, and couldn't find a fix. It was also screwing up certain effects, particularly warp stabilizer every time I rendered or exported. Finally, I tried changing the renderer from Mercury Playback Engine GPU Acceleration (Open CL) to Mercury Playback Engine Software Only, and it worked like a charm. Go to File -> Project Settings -> General and select the renderer from the dropdown menu. Make sure to also change the renderer when you export. Using Adobe Media Encoder, be sure to select "Mercury Playback Engine Software Only" in the dropdown menu next to "Renderer" before you export.
This has completely eliminated the problem for me.

Similar Messages

  • I'm getting green flashes when I compress my mpeg2 files....

    Does anyone know why I'm getting green flashes when I compress my movie for DVD Studio Pro? It plays (relatively) fine in FCP, but when I compress it (using Compressor) for DVD output I got a movie full of green flashes.
    It's really annoying and I can't figure it out. I've had nothing but problems with FCP.
    Thanks,
    Vince
    17" PowerBook G4   Mac OS X (10.3.9)  

    Does anyone know why I'm getting green flashes when I compress my movie for DVD Studio Pro? It plays (relatively) fine in FCP, but when I compress it (using Compressor) for DVD output I got a movie full of green flashes.
    It's really annoying and I can't figure it out. I've had nothing but problems with FCP.
    Thanks,
    Vince
    17" PowerBook G4   Mac OS X (10.3.9)  

  • No power - quick green flash when plugged

    okay,
    it stopped working. I last used it a week ago. It was sitting in my briefcase and went to use it today. When I plugged it the light flashed green just briefly (once). No power is getting to the airport express. I tried other outlets, I tried other adapters. I tried a hard reset. I obviously can't soft reset the station because there is no power.
    Please if anyone can help, please help.

    What you describe is a classic symptom of a dead Airport Express (despite the brief green flash you see on the status light). This is not a fixable problem - you will need to call Applecare and arrange for a warranty replacement (assuming yours is still covered by the original one year warranty).

  • Green flashing on rendered product.

    Whenever I render out a clip, with or without affect the final product comes out with this green flash (like a light switch going on and off) throughout the whole video. How can i fix this?

    Here is a video example: http://www.youtube.com/watch?v=Epf0zlh3JOI&feature=youtu.be
    With these specifications:
    Frame size: 1920 x 1080, Kodekar: AAC, H.264, Video field dominance: Progressive, Colorprofile: HD (1-1-1),
    Audio channel count: 2, Audio sample rate: 48 kHz
    I don't know if this is the information you want, if not then I need help to find it aswell.

  • Transition issues when rendering in AME CC 2014?

    I have a project from Premiere Pro CC 2014.  It uses standard transitions on still clips and everything looks good in the preview window, but when I send to AME the blending changes somehow and the images seem to pop on or off, and sometimes darken over the previous image in strange ways.  I am rendering using the software Mercury engine in both applications.  Any suggestions?  Thanks.

    I was having the same problem, and couldn't find a fix. It was also screwing up certain effects, particularly warp stabilizer every time I rendered or exported. Finally, I tried changing the renderer from Mercury Playback Engine GPU Acceleration (Open CL) to Mercury Playback Engine Software Only, and it worked like a charm. Go to File -> Project Settings -> General and select the renderer from the dropdown menu. Make sure to also change the renderer when you export. Using Adobe Media Encoder, be sure to select "Mercury Playback Engine Software Only" in the dropdown menu next to "Renderer" before you export.
    This has completely eliminated the problem for me.

  • Random Green Screen When Rendering AVCHD In New Imvoies

    Hey everyone I have updated to the new imovie and now when i try and render any movies made in AVCHD it comes up with random flashes or green every few seconds. I have never had this problem before its always been fine until upgrading
    Thanks, Tom

    I am still having the issue randomly Here are some links. The ones from Facebook are "public", hopefully you can see them. I tried going around clicking on videos to get you some links. Some worked and the ones listed below didn't. Thanks
    https://www.facebook.com/photo.php?v=812886258730725
    https://screen.yahoo.com/adrienne-bailon-responds-kim-kardashian-194928794.html
    http://live.wsj.com/video/the-deep-ocean-floor-where-mh370-could-be-hiding-2014-07-31-1211 53013/746BCAF6-B454-4E0C-928A-91154BF5D6CE.html#!746BCAF6-B454-4E0C-928A-91154BF5D6CE
    http://news.yahoo.com/video/meet-aesha-symbol-strength-triumph-233713286.html
    https://www.facebook.com/photo.php?v=649999018402615&set=vb.100001775674235&type=2&theater
    http://www.nick.com/videos/clip/thundermans-120-full-episode.html
    http://news.yahoo.com/weird-delay-pain-brown-recluse-spider-bite-explained-144703443.html

  • Video Rendering Option - Premiere CC 2014

    Hi,
    I need your help.
    I updated my premiere cc on thursday of last week, and today i found the first problem of the new version.
    As you can see in the photos attach, the previous version have the option to choose if i want the render and preview, by the hardware or software.
    This option appears early on when I create a new project.
    In new version of premiere cc, this options, was unavailable.
    Any know why?
    Thanks for all

    It looks like your video card is unsupported. If you have a CUDA enabled Nvidia card, there is an easy fix.
    How to enable CUDA for Premiere Pro and After Effects - YouTube

  • Bugs in GPU renders in Premiere CC 2014

    I have two UltraKey effects applied to a clip (one of them with a mask for special cleanup on a person's hair).
    With GPU turned on, in a rendered video, the person's hair has a flickering halo, like the second UltraKey is alternating between being on and off.
    With GPU turned off, the video is rendered as expected with no flicker.
    As in previous versions of Premiere, it seems necessary (at least for me) to always have GPU acceleration off.

    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports

  • Green Flashes on Preview screen and final produc when i add certain effects

    When i add an effect, such as speed up a video clip, when it is rendered i get green flashes when i preview it and when it is fully rendered. Can anyone explain this, as it makes for very poor viewing.
    thanks

    Download MPEGstreamclip (I gave you the link in my previous post), it is free.
    Then you'll need to export the clips as QT movie > ProRes or DV.
    Read this useful tutorial:
    http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0
    Instructions apply to your case (dealing with h.264) too.

  • When rendering - low RAM usage

    When rendering in Premiere CS5, my machine won't use more than about 3GB of RAM. I have 16GB installed.   In the memory preference, I allow it to use up to 13GB.  Any idea why it isn't utilizing all of my RAM?
    Thank you!

    It is not needed. PR only uses what it needs, nothing more.

  • Green flashing during playback

    During playback I am experiencing a green flash after rendering. This will go away if I close and reopen final cut. Has anyone experienced this, and can anyone confirm that if I continue to render this and export if it will appear on the final product?
    Thank you
    Message was edited by: stripd

    Green screen is almost ALWAYS caused by either outdated or corrupted video drivers (even if they're fully up to date, they can be corrupted).
    Download the drivers from the manufacturer site to make sure they're in good repair.
    http://forums.adobe.com/thread/945765

  • Premiere Pro 2014 MultiCam forgets cut points when rendering (Adobe please help!!)

    I have started using multi-cam and notice that almost always when using multi-cam the rendered results are incorrect - with many camera selections forgotten or flipped to exact opposite!
    Very frustrating - especially since you discover after render!!
    Many times when I select Camera A at some point and then later go to beginning of sequence - many of the selections have been reversed with reversal again at clip transitions - resulting in exact opposite of what I selected or random changes. Locking the tracks does not prevent this. It seems to be overriding my choices based on some program logic!!
    This is with latest Premiere Pro 2014.1 {8.1 build)
    Useless feature if you cannot get it to render your selections but rather random selection
    Wish there was a manual! And not just incomplete video tutorials that are teaser for some associate's paid training (of unknown value).
    Or at least quick forum / support response from Adobe representatives so I can be productive with the tooling.
    Another week of no answers and I will have to recreate in FCP X where multi cam seems to work fine.
    Not the best for brand loyalty, eh?
    Please help

    I'm thinking it might be operator error on this one.  Here's a process that works every time.
    1. Create a sequence matching the specs of your footage.
    2. Add your clips.
    3. Sync manually.
    4. Create a second sequence matching the first.
    5. Nest the first sequence into the second.
    6. Right click on that nested sequence and choose Multi-Camera>Enable
    7. Turn on the Multi-camera view in the Program Monitor.
    8. Play the sequence in real time, switch angles using keyboard shortcuts.  If you make a mistake, leave it for later.
    9. When you're done with the first pass in real time, go back to the normal view in the Program Monitor.
    10. Move through the sequence a second time, cut by cut, tweaking as necessary with the Rolling Edit tool (shortcut N).
    On a side note, 2014.2 is actually the current version.  You should update.

  • Green flashes in exported project? Premiere 2014

    trying to export a project from premiere 2014 but every attempted export has random split second green flashes appearing during playback. Have tried various codecs and try are still appearing - they are in different places with each attempt too???
    need help!
    gavin

    Barbara,
    I took have experienced these "green flashes" in video clips on a timeline.  I am using Premiere Pro in CS 5.  I am running WIndows 7 (64 bit) on a
    Dell XPS-630i.  I have an Nvidia Quadro FX 3800 and two Western Digital eSATA drives with 1 TB each  Any thoughts?
    Jim

  • AE CC 2014 Corrupted and Glitched frames when rendering to Quicktime

    Ever since upgrading to the newest version of After Effects, I've been getting corrupted and glitched frames when rendering videos with a Quicktime holder.  My normal workflow is rendering the video straight out of AE, but it also happens when rendering with Adobe Media Encoder, or even while using the "BG Renderer" script for AE that renders from the terminal.  It happens whether I have multiprocessing enabled or not.
    The corruption differs depending on what codec I'm using, but in the Cineform Codec it shows up as green frames:
    On DNxHD they show up as Red frames (don't have a screencap of this one but you get the idea).
    Using the QT Animation Codec they show up as static or distortion:
    I have not found a codec that does not become corrupted when encased in the QT holder.  Image sequences render out fine, and Cineform with an AVI holder renders out fine.
    Even more strangely, I can fix the problem if I link the AE composition to Premiere, then render the QT file out through Premiere itself.  The fact that Premiere calls and renders the Comp fine but AE does not, makes me think this is a bug in AE's treatment of Quicktime rather then a driver/system incompatibility on my end.  But I'm certainly willing to try any suggestions the community might have for me =]
    Specs:
    Windows 7 64-bit
    AMD Firepro V7800
    AMD Phenom II X6 1090T
    16 GB RAM
    Rendering to a local drive
    Fully Updated AE
    Latest version of Quicktime

    solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOutput Quic…

  • What are these green flashes in Premiere Elements 7?

    I am getting green flashes on my video in PE7.  These green flashes are not there when I view the video using Windows Media Player.  The green covers the entire picture, and then goes away over the course of less than a second in most cases.  I burned the video to a DVD and played in a DVD player to see if it was only while in PE7, but they were burned to the disc that way as well.  If you need any other information to help, please ask.
    Thank you!

    A lot depends on what kind of camcorder your video came from and how you got it into your computer -- and which settings you selected when you set up your Premiere Elements project.

Maybe you are looking for

  • How to make entire node attribute elements as read-only ?

    Hi Experts, I have an requirement to make all fields of an form view (based on one context node) in UI to be shown in Display mode. Any idea on how to acheive that ? I know get_i_xxxx method. But, they should be coded for each attribute seperately. A

  • Goods(Material) issue to production

    Hi All, While issuing materials against production orders, my client has specific requirement to issue material from a specific supplier only to production. Stocks are lying at plant from various sources(suppliers). We have stocks with split valuatio

  • Filling an XML structure with data

    Hi I’m about to write a program that shall do GL postings based on IDocs, using standard FM BAPI_ACC_DOCUMENT_POST. The challenge is that the program shall return the results of the postings back to the sending system in XML-format. The interface tea

  • Why do videos in my camera roll have a circle icon instead of video camera icon?

    The last 2 videos I took last night (I took 11 in total), show a gray circle icon on them instead of the normal camera icon. The running time on those 2 vidoes is not correct, sound is missing in part of the videos, all of the video is not there, and

  • Backing up Site Definitions in Ultradev 1.0

    I'm finally going to upgrade, but I have a lot of Site Definitions in Dreamweaver Ultradev 1.0. Is there a way to backup and transfer Site Definitions from Ultradev 1.0 to the latest Dreamweaver on a new PC? I did find a few utilities but none that s