Green frame when paused.. what might this be?

Hi all,
So I'm working with 5D footage. All is well except for two very strange anomalies:
- Firstly, when I'm in full screen view I don't see the video... I instead see an olive green frame with lighter green vertical lines of the left side of the screen.
- Secondly, when I'm in using Looks, the lower half of the image within the Looks preview screen is stretched downward (basically, it's messed up).
Are these signs of something that isn't quite right? If so, does anyone know what they point to?
Thanks

Thanks for all the tips. Yeah, the files are ProRes and the timeline is set correctly. I'll look into the preferences.
And also, thanks for the heads up on not needing the HQ version. I assume that you're referring to the non-HQ choice that is available in Compressor. I wish I had known that before starting the project. It's going to be a long one indeed seeing as I can only play three images at a time and the final product is going to have up to six images playing simultaneously. Ahh well, we learn as we live.

Similar Messages

When I turned on my computer this morning it had a new noise coming from the top of the screen at the back. Not loud but almost whirring. What might this be ?

When I turned on my computer this morning it had a new noise coming from the top of the screen at the back.
Not loud but almost whirring.
What might this be ?

21.5 Mid 2010
Processor 3.2 GHz Intel Core i3
Memory 4 GB 1333 MHz DDR3
Software OS X 10.8.5 (12F37)
I just found an answer !
I had moved my computer into another room and had to turn up the brightness, as I have always had it on the lowest setting. In doing so it created the noise, I turned it right down and it stopped. I have now set it about level 3 so it's not so distracting.
thanks

Green frames when exporting from CC 2014

Hello. I just updateted to the newest edition of premiere pro(aswell as all the other CC software i have installed which includes phoshop,speedgrade,audition,ame, and after effects). So the versions of the software are the very latest.
My computer is late2013 macbook pro with nvidia graphics card, and i have all the system updates installed, nothing special going on.
Heres the issue:
When exporting the project, i get random green frames, full green frames. Complitely randomly, no pattern whatsoever.
My workflow have been this: Footage shot with two Sony cameras and i have encoded all the materials to mxf format with one step earlier AME version. I started the project with one step earlier premiere, and i have already done 19 out of 23 sequences that project contains, no problem at all with earlier version of ame&premiere. Now i updated to the latest 2014 cc and these green frames started to pop out randomly. I have not used any plugins or effects, only premieres own threeway colorcorrector and bightness&contrast. Parts of the clip have transparent black video as textbackground with crop effect applied and basic textlayer from premieres own text editor. I have exported few grpahics from aftereffects (both the lates and the one step earlier version) to proress 4444 format as RGP+alpha. And im exporting with using youtube SD widescreen 360p settings, nothing changed. Again, everything worked perfectly before update.
things i have tried sofar:
delete caches both manually and from each software
normal boot
pram reset
safeboot
update check
export XML from 2014 cc and import to earlier premiere -> no luck, things got messed up somehow
made a copy of both project files, i compared and changed some version number from 27 -> 26 so i could open the project in earlier premiere -> no luck (this worked back in cs6 time when i had to import cs6 project to cs5.5)
Kinda running out of time, so rest of the night im going to spend re-editing those sequences i have done today with newer version of premiere. Will adobe pay for me for these extra hours, i think my client wont approve one extraediting day(night becaus of the schedule, these must be ready tomorrow with no green frames) because of software problem?
Ask anything you want, i'm 100% sure this is not user error since everything was fine with one step earlier premiere version. I will copy&paste this to the bugreport too.
Thanks

Temporary solution for this was "export xml" after all. I had to disable all graphics and textlayers and delete colorcorrections, and flatten multicam, so i had to redo all grading ja graphics stuff in older premiere after importin FCP xml. But got the work done in time. Won't use cc 2014 in near future unless someone figures out what is wrong with green frames. (well actually now im exporting from older AME, will she if the green frames pops out there too, wouldn't be too much surprised....)

Random Green Frames When I Import Video?

Hello,
I Have Final Cut Pro X and I make videos on youtube as it is my job. I got gaming footage recorded via Eye Tv and Exported it normally as a H.264 and it was 720p HD and a .MP4 File. When I import it onto Final Cut Pro X I See Random Green Frames Just pop out of no where "In The Video" and I have no way of taking it out. Please help ASAP as it is VERY Frustrating .
Thanks So Much,
Im looking forward to some replys
-eLeVaTiiONz
Info:
Macbook Pro Late 2010
Newest Version Of Leopard
Other video content works
Content that does not work is recorded by a hauppauge HD-PVR Using Eye TV
PLEASE ASK IF YOU NEED ANY MORE INFORMATION.

See this guide about how to import camcorder video to iMovie step by step.

A family member set up my time capsule, promises that it is set up correctly but the light on the capsule isn't green, it is yellow, what does this mean?

A family member set up my time capsule and sayy it's workign correcly but the light on it isn't green, it is yellow...what does this mean?

If the Time Capsule is operating normally, the light will be green.
If the amber light is blinking, something is not adjusted correctly, or there may be an update available for the Time Capsule.
Do you have the device that was used to set up and configure the Time Capsule there? Is this a Mac? If yes, we need to know what operating sysem it is using.
If you are not sure, click the Apple icon in the upper left corner of the screen and then click About This Mac. Post back with the OS X Version number that you see there.

Green frames when using AppleScript to export from QT

Not sure if this is a QuickTime issue, h.264 issue, or an AppleScript issue, but i thought I'd start here since I know the least about AppleScript and have some clues to the problem.
I'm creating an Automator workflow that requires a run AppleScript action. My plan is to use applescript to have QuickTime Pro 7.6.6 export an image sequence from a QuickTime movie in h.264, using a QuickTime settings file I've already exported. The script points to the settings file and and exports the sequence to the output folder I've specified. Im looking to export one frame per second. Running the script works well and I'm almost getting the result I want, except that each frame that is exported is entirely green.
Interestingly, when I run the exact same process manually, using the exact same settings, the export works fine, and the frames are correct. Additionally, exporting via AppleScript brings up a different status bar than when exporting manually, which leads me to believe that AppleScript is the culprit. Perhaps it's running some sort of outdated process? The AppleScript status bar comes down from the top middle of the video frame, while exporting manually, brings up a floating status bar. They look decidedly different.
Has anyone run into this problem? Can possibly shed light on it? Possible AppleScript work around? This only seems to effect h.264 videos. If I run the same AppleScript on a prores file, the images export correctly.

Including the applescript in question could be helpful!
tell application "QuickTime Player 7"
export front document as image sequence using settings "Macintosh HD:Users:grato:Documents:SYNC:Sync Assets:settings:Sync_QTexport_setting.qtes" to "Macintosh HD:Users:grato:Documents:SYNC:Sync Assets:Assets:temp:Sync-"
end tell

After applying effects random green frames appear

When applying effects, for some reason 1-2 seconds after the effect plays there are green frames in the video. This also has happened when I used the option to slow down the video speed. Its happened to me on all projects that I have used effects on and I don't know what to do.

Do you have two video cards? There's a KB article about green frames occuring on export if you have two video cards.
Are you editing original media or optimized? You might try using optimized media as maybe the encoder is having problems with the h.264 codec.
Also try clearing out all render files from both the event and project and have it re-render everything.

TS1165 When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry

When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry

I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work.

I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

When opening safari i get a message that says major security issue please contact apple immediately suspicious activity might have been detected. what is this and how do i get rid of it so i can use my internet?

when opening safari i get a message that says major security issue please contact apple immediately suspicious activity might have been detected. what is this and how do i get rid of it so i can use my internet?

A misleading and malicious popup. Launch Safari with the Shift key held down; if that doesn't work, temporarily disconnect the computer from the Internet.
(121307)

I get a pause sign or a play arrow when I logon. What does this mean

When I sign back in to my Imac after it has been asleep, I get my logon picturee and I also get a pause sign or a play arrow. What is this?

Is this with OSX 10.7? If it is, then I will ask your post be moved to that forum since you posted this in the iMac (PPC) forum and no PPC can run 10.7.

When I first plug in my power cord it lights up green and then after a few seconds changes to red. What does this mean and how do I fix it?

When I first plug in my power cord it lights up green and then after a few seconds changes to red. What does this mean and how do I fix it?

Apple systems in MBP have self-maintaining charging systems. If the battery is less than 95%, the charger light turns orange when plugged it. It will charge to 100% and stay green then will hold on charging until the battery drops to 95% again.

My pic 3 has suddenly started draining the battery in only a few hours even when I am not using it. Might this mean something is running all the time? I recently downloaded Dropbox. How do I check? What do I do about it? Or is battery faulty? Tim

My ipad 3 has suddenly started draining battery in only a few hours. Even if not in use. Might this be because a programme is running in he background? I recently downloaded Dropbox. Might my photos still be downloading after a few days? How do I check? What do I do about it? Or might my battery be faulty? Thanks, Tim.

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A." The symbol between volts and amps is the symbol for DC. Do NOT use an iPhone charger. Do NOT use an iPod charger. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?

When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?

I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

Green frame when paused.. what might this be?

Similar Messages

Maybe you are looking for