Green frames on timeline. RAM issue? GPU issue?

Hi guys!
Have anyone experienced that?
These green frames at timeline. After that my Program Monitor freezes and crashes and soon after Premiere too. There is no wat out. It freezes and doesn't close.
I am using Premier Pro CC 2014 at Windows 7 Home Premium.
Another thing: Adobe recommend 8GB of RAM and I have these 8GB and constantly apears RAM low memory, sometimes it crashes just after the message. It can be a low RAM issue? So why Adobe recommend 8GB if it's not enough?
Maybe GPU? It is a GT540m with all drivers updated and working well on non-Adobe softwares.
Thanks!

Thank you for your prompt answer.
I have just read the article you linked over.
Had read one of 'em earlier but they're interesting to understand how Mavericks work, I still have some points of interrogation.
If we consider the figue on how memory compression works, it seems like it is all good but it still doesn't account for why I am using more memory for the same runing processes. I mean, in my case it does not free up memory in the general sense, it litteraly eats memory and THEN frees it up when needed. And why devices use more than twice the memory than others.... this is nuts to me.
I forget to mention a few things. A friend of mine has the exact same configuration of mbpr. And here is what's crazy, he doesn't seem to use any comparable ram amount than I do, even when I lauch it all out on his mac he never uses more than 5gigs....although we had no internet connection at the time so I assume that might be the reason why ram usage was less important, I really don't know.
I know activity monitor ram monitoring comprises file cache too but when I run the 'top' command in terminal, it is kinda the same, just a bit lower let's say the 1 to 3 gigs of file cache that is taken into account in activity monitor and not in temrinal.
Anyways, I guess I'll will keep faith in apple technology as I can't pretend there is any performance drop that I was able to observe.... even with a bad taste in mouth that something is wrong that I can't point my finger at

Similar Messages

  • Potential workaround for green frame issue

    Hi,
    We are sorry for the the inconvenience caused by green frame issue on some laptop models.
    To work around the issue that some users are experiencing in the 1.6 version on specific machines, current suggestions is to add 3 more lines above the last two lines of shared.xml that is located in the C:\Users\your_username\AppData\Local\Packages\Microsoft.SkypeApp_kzf8qxf38zg5c\LocalState
    Note: Make sure Skype is closed (press ALT+F4 with the Skype app open) while you are modifying shared.xml file and make sure you save the changes in the file before starting Skype again.
    Also if you don't see AppData folder in C:\Users\your_username go to View tab and check Hidden items checkbox.
    </Lib>
    </config>
    should be replaced with 
    <Video>
    <EnableWideSupport>0</EnableWideSupport>
    </Video>
    </Lib>
    </config>
    Please try this and post if it solved your issue.
    Thank you in advance

    In addition to the above fix, we would be grateful if you were experiencing green video that you help us by doing this:
    Please go to Search, type dxdiag and run dxdiag.exe, go to Save All information and send generated DxDiag.txt file to kmudrovcic at hotmail.com.
    Thank you in advance

  • PP 2014 CC  - R3D files - Random Green frames with GPU GTX970

    Hello
    I am struggling with a problem when reading & exporting frames R3D files from a Red epic Dragon. Within the app, in a timeline, certain frames will randomly have a heavy green hue. Green frames will also show up in exported image sequences. PP is using CUDA on Windows 7 and I have a NVIDIA GTX970 with the latest CUDA & driver. I do not have this issue when exporting with the CPU.
    It seems that the GTX970 is not validated yet so this could be a  legitimate bug, so I am sharing this info for those looking to buy this card.

    Problem fixed!
    Someone from the Adobe support team instructed me to change the renderer to software only mode. This can be changed under File>Project Settings>General. More specifically, I changed it from Mercury Playback Engine GPU Acceleration (Open CL) to Mercury Playback Engine Software Only. I deleted the old render files and reexported without any further issues.
    Success!

  • Frame Rate and Codec issues in Premiere CC exports

    Here is the breakdown.
    My timeline is...
    A 24fps HD timeline in a Cineform Codec
    My first SD Export was...
    Quicktime / NTSC DV 24p preset
    Result...
    Looks interlaced and squshed in QT Player and claims the file is 29.97fps
    Looks interlaced but not squished in Windows Media Player unsure what frame rate it thinks it is.
    Looks decent in my Premiere timeline and claims it is indeed 23.97fps
    2nd Export I tried HD...Quicktime / HD 720p 24fps preset but changed aspect to 1920x1080 with Animation codec
    Result... HD footage sounds fine recognizes the images in the clip if you click through it in the source monitor, but wen rendered from yello to green in the timeline, the video just reads Media Pending.
    Really need help with this ASAP.  On a harsh deadline.  CC is proving to be more truoble that it was worth upgrading from CS4.

    We are sending the most uncompressed SD version in 23.97fps for another person to author on their end with the compression that will accomodate the other tracks on the disc and get the best quality.  We were told to send a QT file at 23.97 since the original file was a 24.0 fps project (nativly shot on 35mm film) BUT the file we exported at 23.97 to send as a test read as 29.97 outside of Premiere.  If I can solve the annomally with the frame rate changing between Premiere and a QT Player window I will be a happy camper.  Has anyone had issues with frame rates being messed up on export and not exporting as the setting you set it on?
    We are not authoring the final disc at our end.

  • Ram issue with X58M board

    Hello
    I wonder if some one could help me one...... 2-3 years ago i bought a new pc system..... but i still have ram issue!
    my PC contains: MSI x58m bios version 3.8 , i7 950 3.07Ghz, Crucial Ram 1333 6GB (1gb x 6) DDR3 240pin , video card ati Club 3d HD4890, Win 7pro SP1 64bit
    from day 1 i had problem - unexpected restarts...... my pc store exchanged mother board twice, gpu 2 times and 1 time ram..... nothing helped i only lost 2 weeks! But pc started working fine only after in bios we changed the ram MHz from 1333 to 800mhz! after that system was stable no restarts
    could some one plz tell me what is the problem and how to avoid it?
    some info from my ram: CT12864BA1339.M8SFD , BL1119M.3V, 200933 SU
    regard

    Quote from: anat_usa on 10-July-12, 18:00:52
    # of Memory Channels - 3
    but for some reasons i cant use 1066
    that is simple to explain 1066 would work with 3 sticks of ram installed but you have 6 so the max is 800mhz as you have 2x3 channel memory installed and the cpu cant handle that much at full speed!
    its all down to the CPU's (Central Processing Unit's) memory controler Quote from: anat_usa on 10-July-12, 18:09:15
    i have chievtec 750w, -
    my GPU needs only 500 Watt or greater power supply with two 75W 6-pin PCI Express® power connectors recommended (600 Watt and four 6-pin
    club-3d.com/index.php/products/reader.en/product/hd4890.214.html
    seems like should be ok.....
    not the point wattage ratings are meaningless its all down to how that is sub-devided on its rails as ampages i have a 1000W psu here that can't boot a single 24A graphics card as it has 4 x 20A +12v rails and is only usefull as a paper weight!
    what are the ampages of its +12V rail or rails? there the important data points to pay attention to! WATTAGE OF A PSU REALLY MEANS NOTTHING ITS ALL ABOUT AMPAGE IT CAN DELIVER ON THE RAILS!!!!!! minimum Wattage psu calculations are done based on a single high ampage +12v rail and if yours has 2-3 +12v rails its no better then a 300W psu at best!
    that HD 4890 you have requires this:
    18A idle power draw = 216W
    28A under load = 336W
    that is very power hungery at idle probaly neer the max your psu can put out on a +12v rail!

  • RAM Issues: 4GB installed, 1GB showing After blinking light

    Hey Folks,
    After doing some research online I found that my recent issue, which has come up in the past, was probably a RAM seating issue. The issue where the Fan begins running loudly at hyper speed. I forced a shut down, restarted up and saw no issue. Shortly there after the issue returned. I forced a shut down once more, but this time was met with a blinking power light.
    I remembered from past experience that it was a sign of RAM issues so I unplugged, unseated and reseated all four of the RAM on my cards. Initial start up was met with same response. In fact it wasn't until the 6th or 7th seating and reseating, and RAM position switch that I got the computer to start back up. (The initial successful start up was with one card and what should have been 2GB.)  I checked the About this Mac.. and saw Memory listed as 1GB 667  MHz DDR2 FB-DIMM. The 1GB threw me off because at that moment there should have been 2.
    Shortly there after I backed some things up and tried reseating the other card with the other 2 gigs in it. This time I was able to start up however the System still shows the Memory as 1GB 667 MHz...
    I did notice a single red light on one of the cards and am curious if this is trying to tell me anything, or if this is an indication of a poor installation. Also looking for any advice on why the computer is not seeing all 4 gigs, and if some of them may be out of service.
    Any advice would be much appreciated, and please pardon my lingo because I'm not sure all my wording is correct.
    Thanks
    MAC Pro 2007/08 running 10.6.8 2x2.66 GHz Dual-Core Intel Xeon

    Failed RAM.
    Stop beating yourself up over insertion technique. These things get mighty hot and they FAIL.
    If they have a reseller's sticker on them, like Otherworld computing or 1-800-Memory or such, call them and ask for lifetime warranty replacements. Otherwise, think hard about how much RAM you really need and go buy some.

  • RAM ISSUES A215-S7407 - PSAFGU-01V002 SUSPEND MODE ERROR WITH 4GB RAM

    Hi, im having some troubles with my laptop.
    Because it comes only winth 1GB RAM (512MB x 2) i decided to give it an upgrade to 4GB (Max Capcity) according to specifications details on the support site. So i bought two (2) DIMM Modules KINGSTON 2GB 667MHZ, exact model # KVR667D2S5/2G Everything was working fine until i close the lid and it suspend.
    Normally, when i open the lid, it will wake up, and everything will work fine, BUT NOW when it wakes up i have distorted sound and horizontal lines on screen, and sometimes i get a BSOD (BLUE SCREEN OF DEATH) and it restart itself.
    TEST THAT I MADE:
    ONLY 1 DIMM of 2GB  - IT SUSPEND AND WAKES UP NORMALLY (I tested both Dimms 2GB separately)
    1 DIMM 2GB / 1 DIMM 1GB (TOTAL 3GB) - IT SUSPEND AND WAKES UP NORMALLY
    2 DIMMs 2GB  (TOTAL 4GB) - IT SUSPEND AND WAKES UP WITH DISTORTED SOUND AND HORIZONTAL LINES ON DISPLAY.
    It seems like the problem appears only with Max. Capacity (4GB) RAM and only when it suspend CLOSE THE LID (POWER LED CHANGE COLOR BLUE TO ORANGE AND FADES AND COMES).
    With Hibernation, it works fine, the problem is when it suspend.
    It looks that the problem is on the motherboard, maybe a NEW BIOS RELEASE that fix the situation.
    I appreciate if somebody can speak to TOSHIBA SUPPORT DEVELOPER and ask them for an BIOS Update.
    i know that im not the only one with this problem, there is another person that wrote a post "RAM ISSUES" and refers to the same situation, but as i guess, it wasn't solved at all.

    Make sure you install the memory when the light is not flashing, i.e. completly off not sleeping.
    What if you try adjusting - MSCONFIG/Advanced Options/Maximum Memory
    This signature left intentionally blank.

  • RAM issues continued

    Hey everyone!
    I was just reading an archived post from around this time last year entitled "Strange RAM issue." I too have had a strange RAM issue and specifically with my G4 PowerBook (15", 1GHz) and OWC. I also wanted to upgrade from 512 to 1GB and could never get the machine to work at 1GB. I am currently in the process of sending back my third consecutive OWC brand RAM to them and they are finally going to send me some TechWorks memory that I'm hoping will work. I just can't believe...every single set of memory they've sent me has tested out "fine" to them either after I sent it back or in the latest case even before they sent it to me. But it never works in my computer and always fails the Rember test.
    Their latest take on it is that the Rember test isn't always reliable and that it's probably a problem with the memory port in the computer in that it won't accept outside (aka non-Apple) memory. What are some people's thoughts on this? Is it possible that the memory port could work just fine with the original computer's RAM and not with new RAM? Is there any truth to Rember not being all that reliable of a test? (If so, why would they have you use it?)
    I'm really getting frustrated with OWC and I was wondering if that's just me or have other people had this same problem?
    Brian

    APPLE HAS A RECALL for this! READ BELOW AND SAVE SOME MONEY!!!!
    Anyone with these issues needs to see this link. Apple has a recall going for G4 15" AL PBs because one of the two RAM slots die. Mine has been "fixed" twice under this program. There's a number to call to get started. Be forewarned, the person on the end of that phone is not the sharpest tool in the tool box. I had to show him where the recall was on Apple's site and how to interpret it. He had to keep putting me on hold to check with a Powerbook Expert (his title was only Powerbook Specialist). They send you a nice prepaid DHL 24 hr turn around shipping box. First time was great. Second time it came back covered in sticky. greasy fingerprints and the metal around the case screws has been badly scratched. I'm still waiting for Apple to address this but since they found 3rd party RAM in my PB, this is my punishment. FWIW, if you let it go in the broken state too long, bad things could happen. Something from the corrupted RAM wrote to my HD and ended up causing all sorts of issues. A reformat and reinstall was the only cure. Here's the link: http://docs.info.apple.com/article.html?artnum=303173
    A few private repair places on the web get over a grand for this repair. The repair is a complete new main logic board exchange. Big bucks.
    Powerbook   Mac OS X (10.4.3)  
    Powerbook   Mac OS X (10.4.3)  

  • Creating an Aperture web page from photos the page goes white and nothing displays. Is this a RAM issue?

    I have just purchased an iMac 27" 2.7GHZ running OSX 10.7.4 with 4GB RAM (16 GB has been ordered). I am using Aperture 3.3.2. When I attempt to create a web page from photos the page goes white and nothing displays. Is this a RAM issue?

    I have resolved the issue....turns out that, in my case, running OSX 10.8.1 with Aperture 3.3.2 was what was required! I was running Aperture 3.3.2 with OSX 10.7.x and had this issue.
    I hope this helps someone else as well.

  • X-Fi Xtreme Audio & 4GB RAM issue - latest driver?

    :X-Fi Xtreme Audio & >4GB RAM issue - latest driver?T Hi All,
    Been using an X-Fi Xtreme Audio with 4GB RAM for ages, no issues.
    I purchased and installed a zotac 9600 GT which has GB onboard ram, which works fine, but now my X-Fi has started causing general system instability. (processes using heaps of CPU time whilst apparently doing not much, jerky/slow adobe flash, distorted (slow-motion) audio at random times, etc etc.
    In the support section here it says:
    Audio issue from output from soundcard with computer having 4GB RAM:
    <span class="text">
    Keywords: <font>4GB ram, installation, xfi, x-fi
    Summary: Customers with computers having <font>4GB or above of RAM and are experiencing audio issues, please download the latest driver for your sound card.
    However... When this issue first came up I formatted my primary dri've, reinstalled the OS and downloaded the latest drivers for EVERYTHING. The problem has prevailed..
    It was only yesterday that I tracked down this problem in the support section here, and tried to verify that my driver is indeed the latest. But device manager lists the driver as "6.0.0.209" when in the support section here the downloads are named ".xx.xxxx" or something. How can I confirm that I have the latest driver? In any case, I'm almost certain that I have the latest, and this issue is still occuring.
    I have read in other forums that on other varients of my X-FI card, the latest drivers have not solved this problem either.. sorry I cant be more accurate than that.
    For now, I have solved this problem by simply removing 2GB of ram from my PC. Obviously, I'd like to find a solution and put the other 2GB back in!
    Thanks in advance for your help!

    Could DanielK please mod this as well, so we can try them. Or Daniel, you could you please tell me how you modified the previous drivers from auzentech as I dont know how these CL drivers work and are modified. What is the inf in these drivers, and if you could tell me the deviceID?s of all the x-fi models, or atleast for x-fi xtreme music as it is my modell. Thx in advance!
    EDIT:
    I have modified the drivers, was not so hard after all. Im uploading the file now, which should have support for all X-FI cards thanks to Daniel's great job with the earlier version.
    Upload finished in 4-5minutes. I will post with link soon to rapidshare!

  • IBook G4 2005 onboard RAM issue

    Good day Apple Geeks!
    I have 3 iBooks with onboard RAM issue and I'm trying to fix them. I've found that Open Firmware may help but I don't know how to disable onboard RAM.
    Source: http://web.archive.org/web/20070112065215/http://www.kernelthread.com/mac/osx/ar ch_boot.html
    I've found also that it is possible to disable RAM by disabling 3 pins, but I can't manage where are these pins.
    Source: http://forums.macosxhints.com/showthread.php?p=216497
    Please help me and save my computers.
    Best reagards
    Message was edited by: danielzywczak

    Hey Daniel,
    First it would be helpful to know exactly which iBooks you're talking about.
    CPU speed, screen size, OS and RAM installed.
    So how do you know the all three have onboard RAM issues? Does system profiler just show the 0 slot as empty?
    Richard
    Message was edited by: spudnuty

  • V11 firmware RAM issues...what worked for me

    I think everyone that has upgraded to the v11 firmware has by now noticed the RAM issues in the v11 firmware for the N95 (At least in the European generic firmware).
    The cause of this problem appears to be the 23 or so programs the firmware installs into the phone memory that are all related to the "Search" application on the phone.
    I uninstalled them all and the RAM problems went away.
    To get rid of them go to Tools > Application Manager and uninstall everything you see related to search.
    While I was at it I got rid of Snakes, the System Rush game and the settings and welcome wizards.
    Note that this will remove the Search application from your phone entirely so do so at your own risk.
    An alternative is to move it to your memory card if you wish.
    Useful links: Phone firmware update | Nokia support site

    The problem you are having is a DNS issue.
    Somewhere along the line your DNS address(s) became deleted from the network System Preferences for your 'active' connection (e.g Airport). It probably was set to default to your local (home) router.
    This basically means that safari can not find the web site you attempt to load, so it waits for a very long time.
    You can add in the DNS address(s) by either going to System Preferences / Network and selecting your active network connection / DNS tab. OR you can go to Safari Preferences / Advanced and then click the "advanced" button which will take you to the System preferences panel.
    The DNS server is provided by your ISP in most cases, or you can use the "Open DNS" servers at 208.67.222.222, & 208.67.220.220.
    -Alan

  • N95 + CoPilot 7 - Possible RAM issue

    Hello,
    I have had my N95 for a couple of weeks and I must admit I love the phone in every way. However I am noticing a small issue when running CoPilot and was wondering if this sounds like a RAM issue.
    Basically when the app is running sometimes it seems to just lockup (usually if rereouting), occasionally the app will close (especially if I get a message through) or even reboot the whole phone.
    I have installed Handy Taskman and I have noticed that when it all goes wrong I have about 100k of free RAM which would suggest that the phone is running low on memory (or very close to it).
    Now unfortunatly I only seem to have 13Mb available at the best of times but I am also on a T-Mobile handset running v12 (before demmand paging and the RAM boost).
    Spoke to T-Mobile about the updates to v20 and v21, they have no release date. Altough I have noticed that the T-Mobile site no longer has the N95+CoPilot option since they have moved to v7, which is puzzling, maybe the lack of the v20 update means that the app does not run that well, although that is just speculation on my part.
    Anyway, I really like the N95 but this memory issue is bugging me. I am considering sending the phone back to T-Mobile and buying a SIM free one so I can update it. Tried local Nokia service center and I already have the latest software for my phone (v12).
    If I do get a phone with v20 (or v21) how much extra RAM will I get, and more importantly how much free memory? If I say CoPilot needs about 14Mb - 15Mb free to run well am I likely to get this with the latest software from Nokia?
    I know there are ways to get the latest updates on my phone but I don't want to risk it, would much rather send this one back and buy one from Nokia.
    Any advice would be greatly appreciated.
    Lee

    Send it back to T-Mobile and buy directly from Nokia.
    N-95 8GB, Wish Nokia made a 3G World Phone.
    Release a 3G HSPDA 850/900/1800/1900/2100 and Quad Band GSM phone instead!

  • The infamous RAM issue with bootcamp

    Sp, I have seen a lot of threads about RAM issues when using bootcamp.
    I'm about to install Windows XP SP 3 using bootcamp - how much RAM will be utilized when using my windows partition?
    I have a MBP 2.33 Ghz Intel Core 2 Duo with 3 GB RAM and Radeon X 1600 256 mb RAM.
    Looking forward to your responses.
    Thanks

    This is not so much an issue with Bootcamp as it is an issue with Windows. On any machine, Mac or PC, Windows will only recognize approximately 3GB of RAM. The only Windows Operating Systems that are capable of going higher are the 64-bit OS choices. So, if and when you upgrade your MacBook Pro to 4GB of RAM, Windows will still only see 3GB. Just a heads-up.

  • MOVED: RAM issues regarding CPU + Mobo & OC'ing

    This topic has been moved to Overclockers & Modding Corner.
    RAM issues regarding CPU + Mobo & OC'ing

    Quote
    Ok...but the problem was increasing the FSB.....and as for increasing the memory, I realise I have to change it back to 200mhz, but Im getting to that part after I overclock the CPU, I guess thats how its suppost to go? According to the guide Im using anyway...I dont understand how you can test one of them at a time, seeing as increasing the FSB increases the RAM frequencing.
    You are testing one at a time by lowering the memory to 100.   Increasing the "FSB" will result in memory speed less the 200, we know the memory is good up to 200, so...  This way you are pushing the CPU to it's limit but the memory is still running far less then what it can.   In this example the CPU max speed is found then you bring up the memory like you said above.
    Quote
    Also, there would be no point in getting PC4000 RAM seeing as the Neo4 platinum only supports up to PC3200, plus I was thinking of getting OCZ 2GB (2x1GB Kit) EL DDR PC-3200 Dual Channel Platinum Kit (CL 2-3-2-5) anyway, looks like its good RAM.
    That's just because there isn't an official PC4000 spec.  It will run fine and can use it's potential in this board although if we can't get you higher then 225HTT(FSB) then PC4000 is overkill, as you wouldn't quite max out PC3700 right now.  I've seen memory running at 350Mhz(700Mhz) in your board.  That's like PC5600!  Rule number one, don't believe MSI. 
    I like that OCZ kit you are talking about.

Maybe you are looking for