Green fuzzy images

Why are my images on my event screen and timeline showing up as green fuzzy glitches (looking much like a worn down VHS tape.) Is there something wrong with the import or is it a bug in the software? The preview in the event window seems fine, but when I click on it it shows up like this, both in my events and on my timeline.

'getting green' is often an indicator of wrong conversion..
What is the original source of that clip?
Did you use FCPX' own import routines to import straight from camera/chip?
Is your source a camera anyhow, or 'a file'?
Did you use a converter tool. making clips manually 'comfortable' for FCPX?

Similar Messages

Gray balance gets green toned images in 3.5 upgrade

Something I've noticed working with the Aperture 3.5 upgrade — when you use the gray balance picker in the White Balance brick using Temperature & Tint, when I pick a white, black or gray spot to balance the colors, I get a green tinted image.
Like a studio light image will go from 6176/8 Temp/Tint to 3611/-120. Just started happening with upgrade. Any similar problems, or suggested fixes?

There have been several threads reporting the same problem. The "Temperature & Tint" does not work correctly. Send a bug-report, and avoid this this feature until a bug-fix is out.
The other white balance settings seem to work.
For example: Eye Dropper malfunctioning in Aperture 3.5/Mavericks.

Camera fuzzy image help

Camera has fuzzy image help

Hi there ladedah30,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

How can I decrease the size of a green-screened image relative to its background image?

In iMovie 9.0.9 if it possible to reduce the size of a green-screen image relative to the size of its background image? Using KenBurns and Crop I can somewhat enlarge the green-screen image. But is there any way(s) to shrink it?

FrecklesandEmeralds schrieb:
Ridiculous or not, it's what I'm working with...is there any way to do what I'm asking?
I gave you the answer:
But you are not aware that an EPUB is a ZIP file.
FrecklesandEmeralds schrieb:
It's just huge, even before I zip it...how can I see what item is taking up the most space?
I did not write that you should zip.
I wrote UNzip it. And have look into the package, what is inside which is causing the size.

Insert green screen image

What is the best way to insert a green screen image into a normal jpeg image? Will iphoto do it or do I need another photo editing program. I believe i may be able to do it with imovie but don't want to make it overly complicated. I could use either my ipad with ios or older white macbook with OS X 10.7.5 (best it can do) to do this.

This is compositing and iPhoto doesn't do that. You'll need an external editor:
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate or the App Store.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

Green Webcam Image

Hi there
I have an issue where sometimes after a certain amount of time my friends webcam image goes green (see image). My webcam image on thier end remains in colour. I am calling from Scotland to Canada, both of us are using skype version 7.0.0.102 and both are using windows 8. My friends webcam is the Microsoft LifeCam Studio.
All drivers are also up to date with both of us.
Any help would be appreciated

RTAidan wrote:
Hi there
I have an issue where sometimes after a certain amount of time my friends webcam image goes green (see image). My webcam image on thier end remains in colour. I am calling from Scotland to Canada, both of us are using skype version 7.0.0.102 and both are using windows 8. My friends webcam is the Microsoft LifeCam Studio.
All drivers are also up to date with both of us.
Any help would be appreciated
Do you have this issue with other contacts too, or only with this one?

Green fuzzy screen - Any suggestions?

After updating to iOS 5.0.1 my ipad has been slow and sometimes unresponsive. It was operating very slow today and then the screen went to a green fuzzy screen. Now it's less green and has a pulsing redish box on the home screen. Any suggestions?

Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Green Fuzzy screen

When i turn on the laptop it comes on with a green fuzzy screen and will not do anything elso.

Hello @DBow ,
Welcome to the HP Forums!
I understand you are experiencing a green fuzzy computer display. I'll do what I can to help! I would try the troubleshooting in this document: Display Quality Issues
If the issue is not resolved by trying these steps, you are probably experiencing a hardware issue. I would contact HP phone support for assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks!
Mario
I worked on behalf of HP.

Flex 14 green fuzzy screen

I purchased this laptop in August. I have only had it a few months and half my screen has began to flicker green fuzziness. My computer is still under warranty. What should I do?

Hi cjohnson88,
Looking at the screen shot I may have to agree with yigit though. This does look like more a hardware failure. But however before finalize into that conclusion, i was wondering that fuzziness of the screen happens are you still able to move your pointers around or open applications or does your system freezes and put it to a halt until you have to attempt a hard reset ?
Reason I ask is that based from screen shot it looks as if only the area in the browser or window is affected, so I assuming that this could be software but just wanted to make sure.
Do let me know.
Regards

Issues: extremely slow start up, occasional green fuzzy screen, doesn't always hibernate and overheats

First off, I should say that I'm not the type of person to shutdown my computer. If anything, I shut it to hiberate. I'm not sure if that's bad pratice or if that's what lead to this over time.. So here's what happens.. Today, I was working away and all of a sudden a fuzzy screen comes up with a little bit of green and then a beeping sound. So I shut it off. This is rare, sometimes the fuzzy screen comes up for a second randomly or when I open my computer from hiberate mode or when I'm just using the computer.
When I turn my computer on,
1. sometimes the 'on' button doesn't work and it takes a few tries (however this hasn't happened in the past few weeks. *knock on wood*)
Once the computer is on the blue screen comes up:
2. which stays on for anywhere from 5-20 minutes.
3. Log in appears with the cursor blinking but I actually can't type anything.. It lags behind sometimes another 20 minutes before my password appears and I could log on.
Checking the message board for similar questions it was recommended that I update the software.
I've tried to get Mavericks on here but I get an error message when it tries to restart the computer and never does so successfully on its own.
I've helped it along and was able to attempt at installing it but I waited a least an hour for it to 'find my disks' with no luck I went the disk utility repair route istead of time machine backup which couldn't find my external or anything for that matter.
The error message I got back was:
invalid block count It should be 21066078 instead of 21066076. Found corrupt needs to be repaired.
Any thoughts or advice would be helpful. Thanks in advance. Below is my EtreCheck.
Hardware Information:
    MacBook Pro (15-inch, Mid 2010)
    MacBook Pro - model: MacBookPro6,2
    1 2.66 GHz Intel Core i7 CPU: 2 cores
    8 GB RAM
Video Information:
    NVIDIA GeForce GT 330M - VRAM: 512 MB
    Intel HD Graphics - VRAM: 288 MB
System Software:
    Mac OS X 10.6.8 (10K549) - Uptime: 0 days 2:2:6
Disk Information:
    Hitachi HTS725050A9A362 disk0 : (465.76 GB)
        (null) (disk0s1) <not mounted>: 200 MB
        Macintosh HD (disk0s2) / [Startup]: 465.44 GB (80.03 GB free)
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Problem System Launch Daemons:
    [System]    org.samba.winbindd.plist 3rd-Party support link
Launch Daemons:
    [System]    com.adobe.fpsaud.plist 3rd-Party support link
    [System]    com.adobe.SwitchBoard.plist 3rd-Party support link
Launch Agents:
    [System]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [System]    com.adobe.CS5ServiceManager.plist 3rd-Party support link
User Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [not loaded]    com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
    AdobeResourceSynchronizer
    Dropbox
Internet Plug-ins:
    AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
    FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 3rd-Party support link
    Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
    AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
    AdobePDFViewer: Version: 10.1.9 3rd-Party support link
    CouponPrinter-FireFox_v2: Version: Version 1.1.9 - SDK 10.5 3rd-Party support link
    Flash Player: Version: 13.0.0.214 - SDK 10.6 3rd-Party support link
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.6.6
    Silverlight: Version: 5.1.20513.0 - SDK 10.6 3rd-Party support link
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
    Flash Player 3rd-Party support link
    Flip4Mac WMV 3rd-Party support link
Old Applications:
    None
Time Machine:
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU:
         6%    firefox
         5%    EtreCheck
         2%    hidd
         1%    WindowServer
         0%    distnoted
Top Processes by Memory:
    631 MB    firefox
    164 MB    mds
    74 MB    Mail
    74 MB    Dropbox
    57 MB    plugin-container
Virtual Memory Information:
    5.33 GB    Free RAM
    1.02 GB    Active RAM
    799 MB    Inactive RAM
    886 MB    Wired RAM
    1.30 GB    Page-ins
    0 B    Page-outs

Simska,
regarding the overheating, you can try resetting your MacBook Pro’s System Management Controller.
Regarding the invalid block count, you should boot from your grey Mac OS X Install DVD which originally came in the box with your MacBook Pro, run Disk Utility from it (via the Utilities menu in the menu bar), and select Repair Disk for your internal disk.
After your disk is repaired, exit Disk Utility and restart from your internal disk. When you log in, you should uninstall your installed version of iPhoto Photocast — it was written to work with the Lion (Mac OS X 10.7) SDK, but you have Snow Leopard (Mac OS X 10.6.8) installed, so it’s not supported under Snow Leopard. Install in its place an older version of iPhoto Photocast which is compatible with Snow Leopard. You also have an outdated version of Silverlight installed — you can download the most recent version from here.

HELP! Fuzzy images and text in Muse

Hi
I am going to preface this post by admitting that I am a complete amateur, just trying to create a simple but work-able and professional looking website for my business.
I am new to Muse (previously used a similar program to create my sites) and have found navigating around the program quite easy. BUT my whole site looks fuzzy.. In 'design' mode and also when previewed (both in Muse and in browser).
I would really appreciate any help that you could give me. If there is a way to upload it to a temporary site for you to give me advice? Or if I can send the .muse file to someone to check for me?
Thank you very much in advance, I really appreciate it
Lauren
Here is a screen shot of the home master when previewed in Muse - you can see the logo, menu, background and text are all fuzzy...

Please click "Publish" enter a name for your site and click "OK". This will create a free temporary website on Adobe Business Catalyst. You can then post the URL for that site here for the community to look at.
A couple questions:
1) I expect you're on a Retina Mac?
2) Text appears to be images or System fonts? Whenever possible you want to use a Web Font. If none of the Web Font choices fit your need, then check the "Web Safe" fonts. If you still come up dry, then use a System font as a last resort. When using a system font Muse will convert it to an image. This will result in slower page load times in the browser and (in some cases) lower quality rendering of the type. Whenever possible, if you use a System font, you'll want to set the fill on the text frame to be opaque (a solid fill color, 100% opaque gradient or 100% opaque image that fills the complete text frame). If the text frame contains any transparent areas, then the image version of it will have lower quality anti-aliasing, edges, on the type.

Photoshop - combine red and green channel images into a merged image?

Hi,
I am a developmental biologist carrying out experiments on a type of microscope known as a Confocal Laser Scanning Microscope (CSLM). Basically, this is a microscope coupled to some lasers which allow fluorescently-labelled parts of a biological sample to be imaged in high detail.
For each sample there will be a set of two images produced, named and numbered as follows:
sample01_g.tif
sample01_r.tif
Each image represents one fluorescent wavelength and correspond to green ( g ) and red ( r ). These images are in rgb colour.
I want to produce a merge of these two channels to generate a new TIFF file such that:
Green channel is taken from sample01_g.tif
Red channel is taken from sample01_r.tif
Which would show me how the different channels co-localise, or not.
This is fine to do by hand in Photoshop, but takes a long time when you have a couple of hundred images to process. So, what I would like to do is write a script that batch automates the process, like a droplet. I have the process outlined below:
Create a new RGB TIFF called sample01_merge.tif
Take the green channel from sample01_g.tif and copy it to the green channel of sample01_merge.tif
Take the red channel from sample01_r.tif and copy it to the red channel of sample01_merge.tif
Save sample01_merge.tif into a folder named "Merged Images" on the desktop
Close the opened images
Go to next set of images –> sample02_g.tif and sample02_r.tif
Create a new RGB TIFF called sample02_merge.tif....and go through step 2-6, untill the last set of images has been processed.
I have never used script before and would love to learn, but I am making slow progress and would like to have this problem solved sooner than I will be able to do so by myself. So... I was wondering if anyone could give me some advice on how to go about doing this?
Any help will be greatly appreciated!
I use a Mac Pro running OSX 10.8.3 and Photoshop CS6 Extended
Best regards,
John

Yes, as I said it wasn't finished and wasn't meant to be used. It was just to show that working with image sets based on a name pattern is easy.
Here is a version that does do the merge and save using applyImage.
Note: for applyImage to work the images in each set need to be the same size. Some of your jpeg samples were not. This worked with one set by not the other.
// make a reference to the savedFolder
var savedFolder = new Folder('~/desktop/Merged Image');
// create the folder if it doesn't exists
if(!savedFolder.exists) savedFolder.create();
// get the source folder from the user and store in variable
var sourceFolder = Folder.selectDialog();
// make sure user selected a folder
if(sourceFolder != null){
    // get an array of red images and store in variable
    var sourceFiles = sourceFolder.getFiles(/_r\.tif$/i);
    // make a loop to process all found sets.
    for(var i = 0; i < sourceFiles.length;i++){
        var redName = sourceFiles[i].name;
        var greenName = redName.replace('_r','_g');
        var redImage = open(sourceFiles[i]);// open the red file and store reference to document
        var greenImage = open(new File(sourceFolder+'/'+greenName));// open the green file and store reference that document
        // now select each channel and apply matching channel in redImge using lighten mode
        app.activeDocument.activeChannels = [app.activeDocument.channels.getByName(localize('$$$/ColorModes/RGB/ChannelName/Red=Red'))];
        applyChannel( charIDToTypeID( "Rd " ), redImage.name );
        app.activeDocument.activeChannels = [app.activeDocument.channels.getByName(localize('$$$/ColorModes/RGB/ChannelName/Green=Green'))];
        applyChannel( charIDToTypeID( "Grn " ), redImage.name );
        app.activeDocument.activeChannels = [app.activeDocument.channels.getByName(localize('$$$/ColorModes/RGB/ChannelName/Blue=Blue'))];
        applyChannel( charIDToTypeID( "Bl " ), redImage.name );
        // select the componet channel( rgb )
        selectComponentChannel();
        // save the merged document
        SaveAsTIFF(savedFolder+'/'+redName.replace(/_r\.tif$/i,'_merged.tif'),true);
        // close the open documents for next loop
        redImage.close(SaveOptions.DONOTSAVECHANGES);
        greenImage.close(SaveOptions.DONOTSAVECHANGES);
function applyChannel( channelID, documentName ){
    // charIDToTypeID( "Rd " )
    // charIDToTypeID( "Grn " )
    // charIDToTypeID( "Bl " )
    var desc = new ActionDescriptor();
    var channelsDesc = new ActionDescriptor();
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID( "Chnl" ), charIDToTypeID( "Chnl" ), channelID);
    ref.putProperty( charIDToTypeID( "Lyr " ), charIDToTypeID( "Bckg" ) );
    ref.putName( charIDToTypeID( "Dcmn" ), documentName );
    channelsDesc.putReference( charIDToTypeID( "T   " ), ref );
    channelsDesc.putEnumerated( charIDToTypeID( "Clcl" ), charIDToTypeID( "Clcn" ), charIDToTypeID( "Lghn" ) );
    channelsDesc.putBoolean( charIDToTypeID( "PrsT" ), true );
    desc.putObject( charIDToTypeID( "With" ), charIDToTypeID( "Clcl" ), channelsDesc );
    executeAction( charIDToTypeID( "AppI" ), desc, DialogModes.NO );
function SaveAsTIFF( inFileName, inLZW ) {
    var tiffSaveOptions = new TiffSaveOptions();
    if ( inLZW ) {
        tiffSaveOptions.imageCompression = TIFFEncoding.TIFFLZW;
    } else {
        tiffSaveOptions.imageCompression = TIFFEncoding.NONE;
    app.activeDocument.saveAs( File( inFileName ), tiffSaveOptions );
function selectComponentChannel() {
    try{
        var map = {}
        map[DocumentMode.GRAYSCALE] = charIDToTypeID('Blck');
        map[DocumentMode.RGB] = charIDToTypeID('RGB ');
        map[DocumentMode.CMYK] = charIDToTypeID('CMYK');
        map[DocumentMode.LAB] = charIDToTypeID('Lab ');
        var desc = new ActionDescriptor();
            var ref = new ActionReference();
            ref.putEnumerated( charIDToTypeID('Chnl'), charIDToTypeID('Chnl'), map[app.activeDocument.mode] );
        desc.putReference( charIDToTypeID('null'), ref );
        executeAction( charIDToTypeID('slct'), desc, DialogModes.NO );
    }catch(e){}

Why fuzzy images when opened in Editor ?

When opening images in the editor the edges of the image are jagged and fuzzy.
They seem ok at 100% but at the lower magnifications, less than 50%, problem.
To me it is very noticeable and the image just looks wrong.
I have tried trial versions of Elements 8 and 9
I have the same problem on XP64 and Windows 7 64bit
My comp specs as follows:
Intel Quad
ATI Radeon HD 3400 series
Monitor ASUS VH222H
I suspect this is a software issue because the images look fine in Picasa
and other programs.
Thanks for any help.
Mike

Can you post a screenshot?

Blu-ray build: no video (solid red, green, etc image)

Hey everyone,
If this problem has already been addressed, could someone please point me in the right direction? I searched and didn't find anything similar, but wasn't too sure what to search for.
My problem: Everytime I build a blu-ray project in Encore, I am getting the same result; the video will play (according to the progress bar on the player), but the image is always a solid color, sometimes it's red, green, tan, black, apparently just random, but always the same color throughout the entire video.
I have tried so many different things at this point, I'm at a loss for how to proceed further. I've tried this with at least three different projects, all of which were created in Premiere. I have attempted both the dynamic link from Premiere to Encore and exporting the video first and importing into Encore later. I have tried transcoding as .264 and MPEG2 (I am not very knowledgeable about the settings, so I use the defaults). I have tried building the project in Encore as a blu-ray folder and as an ISO. I have burned to discs and played just the digital files on my PC.
The video always plays fine up until after it is exported from Encore (that is, it previews fine in Premiere, exported video from Premiere plays fine in players like VLC, and the video previews fine in Encore).And I have no trouble building DVDs in Encore with the same video, timeline, and all that jazz.
The only thing I haven't done yet is gone to the trouble of trying to reinstall Encore, which will be my next step if noone here has any suggestions. I am running CS6 with all recent updates. I have been testing the blu-ray playback in PowerDVD and a PS3.
Like I mentioned above, I'm not very proficient in video. If I left out important details, just let me know. Thanks in advance for any help!
Matt

When I play the m2ts file, it works fine in VLC and also in PowerDVD. That's interesting, but I'm not sure what that means?
If the actual m2ts file from the Encore build does not show the problem, but what I assume is the same file on disk (or in iso) shows the problem, what could cause such a problem? (I don't know.) The more frequent oddity is a problem on burned disk and not on iso or folder, which points to the burner, burn speed, or media. But that does not appear to be the issue here.
I can't find the example at the moment, but try creating a tiny bluray project and see if the problem occurs. If so, you can upload it for me to take a look.
For example, one menu with one button, linked to a 30 second timeline, using a sample of your material that is causing the problem. If that shows the problem, I would also try a bars and tones sample to eliminat your actual video - although I assume your video is part of the equation.

Ipad mini green ghost images in pictures

Does any one every get a ghost green images when they take pictures with their Ipad Mini? I get this when I take pictures in direct light.

You can do it via your computer's iTunes. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

Green fuzzy images

Similar Messages

Maybe you are looking for