Green image in monitor

Hi,
I made my project in adobe encore 2.0 with a mpeg video, already transcoded.
The problem is that in the preview monitor, the video appears with large green blocks (like digital noise). The original file works great though. When i finalize the project, as i don't need Encore to transcode the file, the video has no such "noise".
The problem is that, in my menu, i have animated buttons made with the mpeg video. And, as Encore transcodes the video to make the animated buttons, I get the green blocks problem in my menu.
I think it's a codec problem, so I uninstalled all the divx/xvid codecs in my computer, but it did not solved anything.
Thanks for helping.

Hi,
I just changed my mouse to see if it changes anything.
It was an elecom mouse ( i uninstalled the previous driver) and replaced it with a generic mouse. The driver is called "mouse HID".
But nothing changed, I still got the green blocks problem.

Similar Messages

No green color on monitor

my new msi 845 ultra using win me works great except that i have no green on my monitor. the friend who set it up for me said no drivers had to be installed and need a new monitor.
as you can probally tell, i know zip.nadda about all this and would greatly appreciate any positive help.
thanks

Try unplugging the monitor cable on the vid card and making sure no pins are bent. I had one pin bent and it only showed yellow. Might help. Also, do you have an agp vid card or is one integrated? Either way you would be best to install the most current drivers. You can go to the manufacturers website (vid card manufacturer). Good Luck.

Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you

PE10 Pixelated images in monitor

I have just upgraded to PE10 and, after some initial start up problems I had, it seems to be running fine (so far - haven't tried any major edits yet) except that when I play the loaded video files (and stills for that matter) the images in the editor monitor pixelate (they seem ok in pause mode) making editing a little awkward as the images aren't clear (of course).
I created a still title and, whilst not so bad, the text blurs when in the monitor play mode.
I don't think it is a render issue as there have been no major edits merely cuts and shortening of clips.There is no red line in the timeline but I have 'hit' return anyway and the 'Render' information box doesn't materialise.
I am running Windows 7 - 64 bit and this is the version I dowloaded. Screen resolution for the PC monitor is set to 1920x1080.
The video files were shot on a Canon XM2 in 16:9 format and appear fine when run through the camera.
The PE project settings are for 16:9 PAL.
A burned disc plays ok on a televsion through a DVD player.
I took a screen dump of the video whilst playing the video and, although the image is quite small (upload constraints), careful scrutiny will see the pixelation
How can I improve the play resolution of the editor monitor?
Brian

Though the un-Rendered footage on the Timeline is seldom seen as "pixelated," it can be blurry.
There will likely be red lines above the Title, and possibly some of the Video and Still Images. If one Renders, by pressing Enter/Return, those should turn green, and then one will have the best possible playback.This ARTICLE goes into more detail.
Also, having chosen a correct Project Preset, at New Project, can be very, very important for best quality. The Project's Preset should match the Video Assets - the Source Video Files.
Also, if the Still Images are overly-large, Scaling in PS, or PSE, prior to Import, will likely be helpful for both quality and for the necessary processing overhead, required to internally Scale the Images. For Scaling Still Images, this ARTICLE goes into more depth.
What are the pixel x pixel dimensions of the Still Images?
Good luck,
Hunt

B&W G3, no image on monitor

I've looked around quite a bit, and I can't seem to find any other posts (here or on other sites) that deal with exactly this problem.
I have a B&W G3 that's been upgraded quite a bit by the previous owner. It has a 500 mhz Sonnet G3 processor, 512 MB of RAM, a 32 GB Seagate Cheetah hard drive, and a ATI Radeon 7000 video card. It's a Revision 1 case, but a Revision 2 motherboard. The monitor is an Apple 17" Colorsync 750. The family number on the back is M2935. I'm using an adapter (I don't believe it is branded) to go from the Apple monitor connector to the vga connector on the Radeon 7000 video card.
The other day, I turned the machine on, and my monitor had nothing on it. The monitor is powered by an electrical cord plugged directly into a power strip. The power cord does not go from the computer to the monitor. The monitor turns itself off upon shutdown, and comes on by itself upon startup. The monitor's light was off completely. No green, no orange.
So far, I have unsuccessfully tried a few things to solve the issue. I have tried other monitors. No luck. One was an old 15" Apple. I used the same adapter. I did get power to that monitor using the same power cord as had been used with the 17", but I only got flashing, no picture. I also used an old VGA, an NEC I think, and had the same situation.
I also connected the 17" in question to an old Beige G3. No problems. The monitor displayed the signal from the Beige just fine.
Next, I tried another video card. A friend has a B&W and let me try the stock Radeon Rage 128 that came with his machine. No luck. His B&W has been sitting around a while, and while I did not test out that machine, he has never had a problem with that video card.
I also tried switching my Radeon 7000 down to a longer PCI slot. Also no luck with any of the monitors.
So, I am now at a loss for what to try next. The 17" monitor worked with the Beige. Also, I think that it is more than likely that both video cards are working, so I don't think that is the cause. This machine was worked without issue for me for nearly two years.
I'm afraid that perhaps it may be some sort of issue with the motherboard.
Any suggestions are welcome. Thanks.
B&W G3 Mac OS X (10.3.9) 500 Mhz, 32 gig Seagate Cheetah scsi, 512 Mb RAM

Grant, thanks for the response. I think I did unplug the computer. I can't be absolutely sure, but I think I did. Maybe that started my problems. I will pick up a new battery.
The good news is that I do have things back up and running. I switched video cards, as I said in an earlier post. But the odd thing was, that, after letting the machine sit for a few days, it started up and there was a picture on the monitor. However, the old OS 9-style folder with a question mark came up. I did get the computer to restart in OS X by holding down the X key on restart. Since then it has been OK.
However, I wanted to find out if I could just put my Radeon 7000 back in. So I took out the working Rage 128 and put in the Radeon 7000. Back to no picture.
The good news is that things are operable. But I would like to have the better card back in if I could, but I can certainly function now. Since I did not install the Radeon originally, I'm not sure of all the ins and outs of it, but I am trying to do a little research now and find out if the card needs a driver. Perhaps, my driver became corrupted.
If you have any further advice, I would appreciate it. Also, in your opinion, how much better of a card is the Radeon than the Rage?
Again, thanks for the help.
B&W G3 Mac OS X (10.3.9) 500 Mhz, 32 gig Seagate Cheetah scsi, 512 Mb RAM

CMYK images: strange monitor display & and printing

I tried the way Pages 2 handles CMYK images today and found out some strange things.
My problem: monitor display
CMYK .jpg files are displayed inverted on screen like a negative - black is white and white is black. Layouting basicly rendered useless. Is there a work arround ?
Solved: Printing
For printing there are at least two ways to get a decent result. Here my findings:
- Any color printers
"Print - ColorSync - Color Conversion" set to "Standard" => CMYK images get converted to RGB
"Print - ColorSync - Color Conversion" set to "Printer specific" => CMYK images stay in CMYK if printer is able to print CMYK
- use "Save to PDF" within printing dialog
Same as above, profiles tagged to images stay correct
- Adobe Acrobat Distiller
Same as above, but PDF looses recognizeable profile information. PDF workflow software does not recognize "SWOP" or "ISOcoated" by name but has "Embedded Adobe Postscript CRD Profile" instead which will create problems in workflow processing.
- Exporting "File - Export - PDF"
Profiles stay intact and are handled correctly.
Cube, PB 17" Mac OS X (10.4.7)

Thanks Noel for the reply. Hopefully this will help.
This is how the file should look like.
This is how the file usually displays.
Any help would be greatly appreciated.
Regards,
Ron Cecil

Green images pixelated with black when opening in CS6

Hi there,
I have just come across a puzzling problem.
I am editig some images of furniture I have taken. All images are OK apart from green ones? When I open them in PS CS6 they are havily pixelated on screen with black. When I save the image for web, the preview that opens up, then image is fine again. It seems to be just an on screen, in PS problem.
Any idea how to solve this, it's very annoying!
Thanks,
John

It's AMD that have been doing the tweaking/correcting. Catalyst 13.1 can be problematic for any version of Ps that uses OpenGL although you may not have exposed the problems until yesterday. Your example image shows the bug where a pixel with red component of zero is displayed as completely black.

Resolution of image in monitor window

How can I get the image in the monitor window to be as sharp as the image in the preview window in Premier Elements 10?

Marcel,
If a Project ONLY has Still Images (no Video), then the Project needs to be set to the desired output, say NTSC (or PAL, depending on where one lives) DV Widescreen 16:9 if going to DVD. This is a departure from a Project's Preset, where there IS Video. Then, the Video will dictate what the Project's Preset should be - a 100% match between it, and the Video. When one has both Video and Still Images, the direction for matching the Project to the Video holds.
With Still Images, it is always best to Scale those, in Photoshop/Photoshop Elements, prior to Import into Premiere. This will do two things: keep the processing overhead lower, and actually yield higher quality. See this article: http://forums.adobe.com/thread/450798?start=0&tstart=0. For an SD Project, we recommend Scaling to no more than 1000 x 750 pixels, unless one needs to do a Pan on a Zoomed Out Still. I Scale to exactly the Frame Size of the Project. For an HD Project, say at 1920 x 1080, we recommend Scaling to no larger than 2000 x 1500.
With Still Images, when one Imports those, and drags them to the Timeline, there WILL be a red line. Same as when one adds an overlay, say a Title, or Picture in Picture, or adds an Effect, or even a Transition - the red line will appear, and for smoothest playback, Rendering of the Timeline, or that portion of the Timeline, will be required.
Good luck, and hope that helps.
Hunt

Images in monitor are messed up

Help! I am new to encore. When I create a slideshow in encore the pictures in the monitor view are all messed up. You cant even tell what the picture is. Is this a common proble or is it an issue with my system. Possibly a video driver issue? Any help would really be great

When you say that the images are "messed up," I can imagine all sorts of things. Could you do a screen-cap of the Monitor, and attach it. It might be easy for someone to spot and identify the problem.
Also, tell us more about your Assets: size, Color Mode, anything that you can think of, regarding the images. Might be something obvious in the Assets' specs. Also, is the visual result the same for both the JPG's and the TIFF's?
Good luck,
Hunt
[Edit] Along with the Monitor's display of a messed up image, please post the corresponding image for comparison.

Apple tv 3 shows green image or with static

Hello,
I have a problem with an apple tv 3rd generation.
As the title says, sometimes the image is green or just static.
I connect it through HDMI and have tried on 2 different tvs (other HDMI devices work fine). I even restore the firmware and nothing.
This is a short video of how it looks like http://www.youtube.com/watch?v=dRXzP0ZSJqo
Anyone knows what is wrong with it or how to fix it?
Thanks a lot.

Well my issue is fixed, turns out the update with which cause my issue must have locked somthing up in the settings.
I spent some time with one of the support people which is level two or higher and we found that the ATV3 had IP address etc setting for ethernet even with no ethernet/wifi available. We restored the ATV3 several times and even went to earlier versions of firmware to try to undo this, sadly this failed and my ATV had to be replaced, Apple sent out a new one now all is good again.
I suggest you contact them and if you are able to get them to replace it for you.
I did also notice that the iTunes update that came out at the same time had a problem which may have cause this to happen in the first place.
Restore did not work unless you help option key while hitting the Restore.

Over saturated images when monitor resumes from sleep

Lately I started to get this weird beheviour from LR 2.7. each time my monitor resumes from sleep all image colors become extremely over saturated. All other apps and computer desktop are just the same so it's only LR.
I use a wide gamut LCD (HP LP2475w) which is calibrated using iOne Display 2.
If I restart LR the problem goes away. This only started a few days ago just after I started uploading new photos taken by a new lens (Sigma 30mm).
Any ideas?
Micha

Hi
I can sympathise with how annoying this must be - and although I haven't looked into it myself, I do recall several other posts over the last 18months or so, with the same issue.
I can't dig out the exact posts now, but maybe the following might lead somewhere?
http://webkit.org/blog/73/color-spaces/
http://docs.info.apple.com/article.html?artnum=302827
http://www.gballard.net/psd/golive_pageprofile/embeddedJPEGprofiles.html
sorry I can't locate the threads I remember- I found one or two, but they were un-answered.

Audio square image on monitor, unable to remove

Since a few weeks there is appearing a large square transparent audio volume image on my monitor, that cannot be removed. It appears above every document or image I'm working in, in the middle of the screen. I tried everything to get it removed in system preferences, removing caches, restarting, using anti virus software and everything else I could think of. Without result.
I work already more than 30 years with Macs, I know all the ins and outs and the software too. Never had this before, so I think maybe its a Trojan horse but I cannot find it.
Please, if anybody knows a solution, HELP!

Hi Ramon,
thanks for your fast answer, this is the image
But.... maybe I 'solved' it for the moment, at least I hope so. At this moment it disappeared, but last week it disappeared also for 2 days ant then it re-appeared. So, I have to wait and see.
I disconnected all audio and headphone now from the apple and then it disappeared. But that means I can only listen to build-in audio and that's not the best quality. So once, I have to connect that again.
What is strange also, when this square appears, it's not possible to change the sound volume.
So last week I had to work with constant sound I didn't want to hear from my Mac. When it disappeared, I moved sound volume to 'off'. When it re-appeared again, It wasn't possible anymore to put the sound on 'On'.
Each time when I wanted to change it, it automatically ran back to start position.
It has also influence to my other programs. It's not possible to work with more than 1 program at the same time. So I have to quit before I can work with another program. Closing a file isn't enough.
Nor can I select with my mouse more than 1 file at the same time, for example in Mail to throw away.
This never happened before, so I still think there is a trojan horse or the updates from mac software have something to do with it, because that's the only thing that has changed.

Moving Still Images in Monitor (Pro 7)

I recently re-purchad Premiere Pro 7, and am making a slide show for a friend of the family. I seem to recall being able to grab the still image in the "Monitor" and move/resize the image with the cursor. Now when I try, I don't seem to have any reactivity? Is there a feature or option I need to enable to be able to adjust the image?

Click the Motion effect in the Effects Control window first.

HP 7700 Desktop Power on no green light nor monitor display

Hi. I have a HP 7700 which was been working fine for months, however now unable to use. Power up and red blinking light appears, but doesn't change to green. Monitor display is same as when monitor on but of switched off. Can hear fans whirling and able to open and close disc tray! However something is up and looking for some assistance. Thanks

Hello PaulGuk,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your HP Compaq dc7700 Business PC is having issues booting up after running fine for months. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Image on Monitor is partially 'shifting'

... Actually, only part of the image is shifting, maybe every 5th line is shifting left or right, so that the image is still visible, but blurry. When this occurs, the machine freezes up for 2-3 seconds, then the monitor image 'shifts' back and I can continue working. I've moved the computer to the other side of my desk, and plugged into a different outlet (thought maybe there was some type of intereference, as kitchen renovations are in progress, directly over the left side of my desk...)
The effect of the shift reminds me of old PC monitors de-gaussing.
Suggestions, please!

Hello,
I have had the problem, that the grafic would shift after a time of 1-2 hours using the computer. I rec. that this would a temp. problem. Because dust inside the computer reduced the effect of cooling and the temp of the grafic card would be too high.
I tried to put some sticks under the computer to give the cooling around and spec from the bottom plate, more effect. This helps. But this should not be a result for the future, only for a moment. If this helps your comp. you have to clean him inside. This is better with assistance by an expert, because the i-mac is not so easy to clean like a tower.
Kind regards

Green image in monitor

Similar Messages

Maybe you are looking for