Green letter "K" near every link on the page

Any page i open - it displays green letter K near every link on the page. How to remove it? Thanks!

Thanks a lot for the reply! i attached the image, that's how the page looked before. I started Firefox in Safe Mode - everything was ok, then pressed "Exit" and started the browser in normal mode, and since then these green letters are not displayed anymore. I didn't understand why they disappeared as i didn't change anything, but - ok, at least nothing is annoying now! Thanks once more! :-)

Similar Messages

How can I forward a web page (not a link but the page) using Mac Mail'Mountain Lion?

I want to mail a web page, not a link to the page but the page itself. I use Mountain Lion and Mac Mail. I used to be able to do this with Lion.

Look in the outgoing email message window. Make sure Send Web Content is not set to Link Only

How can I put a music link in the page like this?

How can I put a music link in the page like this?
http://members.aol.com/trumanj/midi/tjsragtime.htm
Thanks

Hola JB
No, I haven't...I'm trying to learn flash and it's been keeping me very busy...maybe it's the age..
Len, I been trying to do it that way, but, as I just mention, Flash don't like me :)
Thanks, I will do that for sure.
Daniel Ulysses

Why does when I open new tab on certain website, the link on the address bar doesn't match the page I'm on and shows the link of the page I'm on before?

When I open a new tab...the link on the new tab shows the link of the page I'm previously on. Some of the other page had that effect too. But some website doesn't seem to be affected(ex: Twitter)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

WPC - Dynamic List - Link to the page of an wpc_article

Dear all,
Im working with dynamic Lists to show a list view of my wpc_articles.
In the default settings the elements of the list have a link directly to an article. Therefor the property "contentLink" is used.
I wanna change this link to the page where an article is placed. So Im wondering:
Is there anyway to get the path of a page from the article instance e.g. a property like "parentString" or something like that?!
Thanks in advance.
Greetings,

Thanks for the answer.
Guess i have to put everything I need in the article element so i do not need to show the page.
Another question occured to me while I was doing that:
When I navigate from a Dynamic List to an Element, it should be possible to navigate back and forth with the buttons I created using the history api.
Instead of the "<a href..." in the default dynamic list I created an onclick event. Right now im trying to navigate to the article with its guid and the method "EPCM.doNavigate(...)" but until know i haven't been able to get it done.
Is it even possible to reach that goal and in case it is am I on the right track or is there a better approach available?!
Thanks in advance...
Greetings,

HT5953 I want to buy an Ebook on the ibooks library and I am to able to find the link to the page.

I want to buy an Ebook on the ibooks library and I am to able to find the link to the page.

You may have better luck in the iBooks community. I'll aske the hosts to relocate your post.
iBooks

I have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

i have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

You installed a variant of the "VSearch" trojan. Remove it as follows.
This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.2c232f1e4d12129e.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.2c232f1e4d12129e.daemon.plist
/Library/LaunchDaemons/com.2c232f1e4d12129e.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/2c232f1e4d12129e
/System/Library/Frameworks/v.framework
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Safari randomly stops loading current webpage and any links on the page, usually for 10-15 minutes, but will load other pages in that time just fine.

My Safari and Firefox randomly and unpredictably will stop loading whatever page I'm on and will not load any links on that page. When I do click a link on the page, the progress bar will hold at about 1/8 of the way and will not proceed. I can go to another web page and it will load fine, and I can click links on that page just fine. But when I return to the affected page, it still refuses to load. It will usually start working normally again after I visit another page and come back to it after 10-15 minutes. Nothing I have done so far has seemed to help this issue. I've tried clearing the history/website data, quitting and restarting safari, I reset the PRAM, all to no avail.
I'm running a mid 2010 macbook pro with Yosemite.
Thanks in advance for any suggestions.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

When trying to open a link in the page I am on and open it in a new Tab the browser stops responding.

I open the browser and the Hime Page opens as expected. When I open a link to an item or article on the page in a new Tab Firefox stops responding and thye top line on the screen shows that to be the case. The only way to resolve the issue is to exit or close Firefox and start again. This has just started yesterday (Oct 12) as before that the process worked fine.
When I open a new Tab and then type in a new web site it will open and allow access with no problem, provided I have not open a link as outlined in the first paragraph. I can open several tabs in this manner and Firefox works as expected. But if I try to link from any page and open in a new Tab i get the "not responding" situation again.
After closing Firefox so I can restart it, the browser will open but the first screen will be a blank tab rather than my home page. I can open web sites and Firefox proceeds as expected as long as I do not try to open a link from within the page in a new Tab. I get the same "Not responding" situation.
If I immediately close Firefox after it opens without my homepage and then restart it then my home page will open as expected.
I have not made any changes to programs or setups in Firefox or on my computer in the immediate time before the problem started.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

No picture with Silverlight Player butl the link opens the page

While streaming videos, I can't get Silverlight to work in the new FF Beta 4.0 The link works, and the page starts to open, but it won't stream

You can no longer download YouTube videos as it is against their Terms of Service.
Source: http://downloads.uservoice.com/forums/34980-general

Diasable the personalize page,prefernce,Home,Logout links in the page

Hi all,
I want to disable the global links(personalize page,preferences,Home,Logout links) in my custom page and i want add a new link/item to that global link section on the top right corner of the page, is it possible if such please explain how t do this.

Hi,
Try the below code Do certain modification by refering Developer Guide. Due to the time constraint i am unable to test it.
String OkUrl=APPS_HTML_DIRECTORY + "OA.jsp?OAFunc=ICX_LOGOUT;
OALinkBean returnLink = (OALinkBean)createWebBean(pageContext, OAWebBeanConstants.LINK_BEAN, null, "returnLink");
returnLink.setDestination(OkUrl);
{code}
Regards,
Gyan

How to show "window close" link in the page.

"window close" link is the standard link in the EBS.
But how can I show it in the EBS page? Thanks.

Hello Peter,
Thanks for your reply! That maybe is one solution. I think I used wrong terms to define the problem. But what I really ment, was that how to define links directly to portlet application (through portal of course) not just to portal page. I didn't find help from the HttpPortletRendererUtil class.
I try to explain the problem more clearly:
I have an portlet application that have main page (jsp page). The main page contains different 'areas' that are implemented by an iframes.
For example there is a result area (iframe) and browser area (second iframe). The user can browse the results forward and backward. When user clicks one of the browser links the results are seen in result area.
Ok this works fine when the application is 'ordinary' (not portlet), but when this is adapted to a portal as a portlet (through web provider) and I have to define the source to iframe (I use HttpPortletRendererUtil class's helper method to define links) I have only option to define the portal page link and that's why there comes additional page banners/headers to the result 'area' of the main page.
Hope this is better explained. But if it isn't, please be free to ask more...
Regards, Robert

InD4 - Won't let me put text up to the page edge - need to apply a header! Help!

I am trying to put a text box at the top of my document to use as a header - something I've done hundreds of times before. But, this time, when I add a text box, and add text, it's like there's an invisible object there with a text wrap applied, and it won't let me put my text to the top of the page.
For info: the text box options are set to align text at the top, and to ignore text wrap on any other objects. I've tried selecting all to see if there was something there that i was missing and needed to delete - no luck. Even tried shutting down InDesign, reopening, and starting a new document - it does the same thing on the new document.
It's a space about an inch wide, that extends from one side of the page to the other - but just on the top - I can place text all the way to the edge of the page on the sides and bottom, no problem. HELP!!!!

My guess is that you have aligned your text to document grid... and your grid starst a little bit below the top of your page.... If that´s the case, you have two options to solve your problem:
1) adjust your grid´s starting point from Preferences > Grids
2) Change your paragraph style setting Align text to Grid to None, you find it at Indents and Spacing tab (or alternatively you can change it locally from control panel as well)

Have been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's and the same if I click a link on the page.

been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's.'''bold text'''

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Using search pages (i.e. Google) how can I get a different color on a link (website) that I have previously visited? It used to work that way, but now every link is the same color.

I use Firefox 4.0.1 & Windows 7 Home Premium Edition. In the Options/Contents/Color setting I have the "Allow Pages To Use Their Own Colors" box checked. I tried checking "Use System Colors" with 2 different colors selected for Unvisited Links & Visited Links, but it does not work, & in addition, the Use System Colors messes up my normal view(s). I just want to be able to differentiate between Visited & Unvisited Links. Thank you.

Hi,
Agree with Holger, I check on my Lync Windows Store app and can't find the meeting URL as well.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Green letter "K" near every link on the page

Similar Messages

Maybe you are looking for