Green level indicator no longer works in soundvol.exe

Hi ,
I'm trying to screen capture a game for reporting, but the sound recorder says it has -127 db level set.
The windows soundvol.exe mixer no longer shows the green level indicator either.
The two things I have done recently is ...
1. installed a Microsoft cordless 800 mouse and key board( I uninstalled the microsoft keyboard and mouse center but it made no difference).
2. Upgraded the System drive to a SSD drive.
The sound volume seems to be working fine, but I can't capture the speakers output anymore and the level indicators are non existent in the sound mixer app.
Any ideas on what's going on would be greatly appreciated.
Thanks & Regards
Bernhard
Best Regards Bernhard

Hi Bernhard,
Run the troubleshooter to see if it could be resolved:
Open the Recording Audio troubleshooter by clicking the Start button, and then clicking
Control Panel. In the search box, type troubleshooter, and then click
Troubleshooting. Under Hardware and Sound, click
Troubleshoot audio recording.
If it doesn't resolve, run SFC /Scannow command to fix the corrupted or missing system file:
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833
Karen Hu
TechNet Community Support

Similar Messages

  • Green Zoom Button No Longer Works

    When I click the green zoom button for a quicktime video, the window no longer zooms. Is there a way to remedy this? I already installed and reinstalled.

    the latest version of quicktimw is horrible. i cant believe had bad it is. the green button doesn't work, audio cuts out after playing the movie until i reduce the window into the dock and then reopen it and audio cuts out. if these problems aren't fixed for leopard it will be shameful. thanks God for VLC.

  • Green screen titles no longer work

    I have created a movie in iMovie 09 and used titles I made with Power Point. In Power Point, I created a fully green slide, then placed text and pictures on it and then saved the picture as .png or .tiff using a screen capture. This picture I dropped on a video fragment and used green screen to put it in the fragment. This works perfectly in one of my projects, but not in any other project. I have compared the project on all possible aspects, but cannot find any differences. Green screen does work when I use a video fragment with green in it. Does anyone recognize this? Thx in advance for the response!!

    Try checking your defaults under PROJECT PROPERTIES, then TIMING, then look at Initial Photo Placement. If it's set on Ken Burns, then it should work. For some reason, if you set it on CROP or FIT IN FRAME it just turns your Green from transparent to GREEN, or your Transparent Png, to BLACK.
    After you Ken burns it, you can just make it so your start frame and end frame are the same.
    I found this out when I was bringing in Transparent png titles and Watermarks.
    Stupid iMovie.

  • Downloaded free game for my iPad 2; made several in-app purchases. The game no longer works, it's happen to all users (customers). Deleting and re-downloading refreshes the game to level 1. How can I get a refund?

    Downloaded free game for my iPad 2; made several in-app purchases. The game no longer works, it's happen to all users (customers). Deleting and re-downloading refreshes the game to level 1. How can I get a refund?

    You can contact iTunes and ASK for a refund. Then make make an exception to their all sale are final policy.
    Refunds from the App Store or iTunes - Apple Club
    In the future set the restrictions so that in-app purchases are prohibited and that a password is always required.
    iOS: Understanding Restrictions

  • TC 2 TB A1409 Wan internet connection no longer working but light is still green?

    TC 2 TB A1409 Wan internet connection no longer working but light is still green?
    My TC and modem have been up and running for at least the last 2 years without any issues.
    It recently started acting up and I would have restart it as I had no internet access. All of a sudden My TC stopped connecting to internet regardless of restart. Utility shows i have no internet connection. I had all the correct green lights on my modem. I figured it might be the modem and connected directly to single ethernet port in modem to my mac book and it worked. When I reconnect modem to TC and restart Modem, TC still shows no internet connection in utility even though I'm getting green sync light on TC.
    Help Please.
    I'm out of warranty, I have not reset to default yet, Im not sure if I will loose my TC back up data.
    please advice
    Remy

    The Gen4 has some nasty faults.. mostly unrepairable...
    If the WAN is gone it becomes pretty well useless at least in its current role as router.
    You might still be able to plug it in by ethernet to a LAN port in bridge.
    Do try a full factory reset.. always worth a go.
    No files will be lost on the hard disk.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Check the ethernet LED is going on.. both on the modem and the TC WAN port.
    Do you have any applecare on a computer? If so it might cover the TC.. the rules are complicated but if the TC was bought within 2years before or after the computer it is covered up to max of 3years. You can still get coverage therefore if the TC is over 1 year but less than 2 years by buying applecare now on a computer or an Apple TV which is not too expensive. You can sell off the Apple TV without even opening it.. but use the applecare on it to get your TC replaced.
    Only the very first Gen4 will be up to 3years.
    Did you have a lightning storm or something btw?? Sometimes the modem can survive and pass the parcel to the TC which seems rather fragile.
    There is also a trick to test..
    You must have v5 airport utility.. any older Macs, or windows computer you can load on 5.6 utility .. even dual boot/parallels mac.
    Go to the WAN setup.. and set the ethernet port to 10mbit half duplex.
    Sometimes a damaged port can still manage the slowest speed.. by magic.

  • HT1218 My airport utility no longer works, but I have just changed my router.  Is there something I need to do ?  The orange light shows up on my airport, rather than the green one it should have.  Please help !!!

    My airport utility no longer works, but I have just changed my router.  Is there something I need to do ?  The orange light shows up on my airport, rather than the green one it should have.  Please help !!!

    **** little info about your equipment.
    If you just replaced the router with an Airport Extreme or Express:
    disconnect the modem from power, disconnect the new router from power, connect the modem to power and wait till it os fully started up, then connect the new router to power. After a while the amber light will turn to flashing, then after a while it will turn to green. Then with AirportUtility (in Aplications/Utilities) it should be configured with the password.

  • Time capsule no longer working

    My time capsule has stopped working entirely.  No longer can use it for my network and it no longer backs up.  My mac book does not even recognize it. any suggestions or is it fried?

    Does "no longer working" mean that the Time Capsule will not power up at all?
    If the Time Capsule will power up, please describe the indicator light on the front panel.....green, flashing amber, solid amber, etc.

  • Built in iSight no longer works in 10.4.10

    After I installed the 10.4.10 update and rebooted my iSight no longer works. If I open Photo Booth to test it out it starts out normal then very quickly starts to fade down to complete black, yet still remains on as indicated by the green light.
    Taking pictures just results in a black square. I tried removing the Photo Booth prefs but that did nothing. Reinstalling the 10.4.10 combo update also did nothing.
    Any ideas?

    Welcome to Apple Discussions, Chadsere
    Because you made your post "in response to" me, I will respond, although, from your wording, you may have intended your post for the original poster.
    adam1185's question has been marked "Answered", which indicates that he does not expect further input. Therefore, you may not see a response from him. However, I agree with your interpretation that "it just magically started working again" for him.
    By whatever method, you will want to get your problems resolved while you still have warranty coverage for your MacBook.
    Notwithstanding what is reported, unless something changes, computers will not heal themselves. Because Mac OS X performs certain checks on your hard drive files at every startup, my guess is that most successes credited to "magic" are likely due to restarts. However, any fix that gets things working for you is a good fix.
    If you have not already done so, apply the 10.4.10 Combo Updater using the method described above. That often helps correct iSight problems.
    If your problem persists, unless your problem is exactly the same as adam1185's, I suggest you start a new topic with as much detail as possible about your system and problem. Your issues deserve the individual attention that they will get in threads of your own.
    Cheers,
    Jim

  • Airtunes no longer working

    Hi everyone.
    I used Airtunes over Airport Express fine for years, but just updated to iTunes 8 and it no longer works. I get error message -3256 when I try to connect, and it directs me to my firewall settings.
    A few notes:
    - in iTunes preferences, I confirmed that the 'look for remote speakers connected with AirTunes' is checked. It is.
    - in System Preferences, under TCP/IP, IPv6 configuration, I confirmed that IPv6 is set to configure automatically. It is.
    - in System Preferences, under the Firewall tab, iTunes Music Sharing is selected but I can't see anything else likely to affect AirTunes.
    So I read this article here: http://support.apple.com/kb/TS2278
    and thought I'd check that the Airport Express firmware is up to date. I downloaded AirPort Utility from here: http://support.apple.com/downloads/AirPortUtility_5_3_2Tiger
    and used it to update the firmware to 6.3.
    I now find that AirPort Utility can not find my Airport Express ("Airport Utility was unable to find any Apple wireless devices...") which has a green light on it, indicating that it's joined my wireless network.
    In addition, iTunes can no longer 'see' my remote speakers.
    This is very frustrating. It used to work fine. I've done everything in the Apple support article and the problem seems to have got worse. Can anyone here advise me? Am I missing something painfully obvious?
    Thanks in advance.
    Jason

    PS Sorry, I forgot to mention I also confirmed that 'block UDP traffic' is not selected. It is not.

  • The Illuminated lights on my keyboard no longer work

    I just noticed last night that my Mac Book Pro's Illuminated keyboard lights no longer work. They used to work without any problems but now they don't. I don't use this feature often, so I don't know how long the problem has been occuring. I only just noticed it last night.
    I tried resetting the PRAM and the power management, to no avail. The "Illuminate keyboard in low-light settings" button is checked in system preferences.
    The strange thing is, I can press the keyboard light controllers on the keyboard and the indicator of the light level appears on the screen, but the lights don't actually come on.
    The ambient light settings for the display are working fine. I don't understand what's going on with the keyboard lights. It's very irritant.
    My Macbook Pro is one of June 2007's models, the Santa Rosa 15", 2.4 GHz Intel Core 2 Duo. It came with Tiger and I upgraded to Leopard in December. Last week I upgraded to 10.5.3. Thanks in advance for any help!

    Yes, as I said in my first post, that box is toggled. It still doesn't work. I've tried turning it off and back on and it still doesn't work.
    I haven't even had this computer for a year yet already it's breaking down. 3 months after I bought I had to have the LED replaced because it was defective, and now this.
    Why is this professional laptop that costs as much as it does breaking down after barely a year? I never had these problems with my IBM ThinkPad laptop. I only needed to take it in for support after 4 years of solid performance.
    I don't expect to see these problems in a supposedly professional computer that is barely a year old.
    Oh well.
    Message was edited by: orbit82
    null

  • PCS no longer working with contacts and 6086

    I have applied the latest release of PC Suite 6.84.10.3.
    Previously the installed level was 6.83.14.1
    The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
    But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
    (translate it from french: The contact has been well recorded into the phone)
    Folder browsing still works correctly, either the phone folder or the memory card folder
    Need a fix or a way to install the previous version, at least for the contacts...
    This is a really negative feedback!
    Phil

    I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
    WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
    Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
    Now we have the functionality that we wanted, right?

  • Smartview indentation no longer working with upgrade

    We are currently running HFM and Smartview with Office 2010. We have updated Smartview from version 11.1.2.1.x Build 271 to 11.1.2.2.310 Build 247. The Zoom In function is no longer working properly.
    In the prior version:
    1. Zoom In = Next Level
    2. Member name Display = Member name and Description
    3. Indention = Subitems
    4. Ancestor Position = Top
    The new version has the same settings however since updating to the new version the indentation no longer happens. 
    Is anyone else experiencing this issue?  Is there a workaround?

    Hi,
    Below is the copy paste of the content from Oracle doc.
    Applies to:
    Hyperion Planning - Version 11.1.2.1.600 and later
    Information in this document applies to any platform.
    Symptoms
    Unable to use smartview column suppression features with an Essbase connection.
    - Start up excel and then go to the smartview menu -> Options -> Data Options -> Suppress Columns section is active
    - Establish an Essbase Shared Connection
    - Go into adhoc mode or just double click on a database to bring up the metadata.
    - Now go to smartview menu -> Options -> Data Options -> Suppress Columns section is grayed out.
    The above feature works fine with a Planning connection.
    Is this an Essbase connection limitation?
    Cause
    Installed the Smartview 11.1.2.1.103 (Build 100)
    Solution
    The following was mentioned in the 11.1.2.2.310 version of the Smart View User's Guide. The description for Suppress Columns was updated as follows:
    To streamline the grid, you can suppress columns that contain types of data that you do not need to view.
    Notes:
    -- In suppressed columns, cell references to Excel formulas are not updated.
    -- The Suppress Columns options are not available when connected to an Essbase data source.
    So from the above, it is not a supported feature when using an Essbase connection.

  • Shuffle no longer working with headset

    Today I got prompted to upgrade my iPod software so I did...and the shuffle (2nd gen) no longer works. The flashy lights were green orange green orange. I went to the help website and dutifully restored factory settings with iTunes. Still doesn't work. Played with various permutations of the off switch (including the 5 second wait mentioned on the help site)and repeating the restore pathway and that didn't work either. The shuffle loads music fine and iTunes recognizes it and even plays the music but when I undock it (making sure to disconnect the shuffle properly) and connect headphones and hit play, the green/orange blinkies reappear.
    Any ideas?
    itune version is 7.3.1.3
    ipod version is 1.0.4
    I suspect this may be part of the problem. I can't upgrade to the latest version of iTunes because of my OS (win 2000). So I'm hypothesizing that when the shuffle tried to update, it failed due to the old iTunes version and somehow the drivers got screwed up.
    Also, I just downloaded the iPod reset utility and tried that to no avail.
    Any ideas? or should I just go to a store?

    It's not a hardware issue. I have the exact same circumstance. After being prompted and then updating the software on my shuffle, it quit working. All I get is the green-orange flashing light. iTunes recognizes it's connected, restore works, and syncing works, but the shuffle does not work.

  • Ipod out no longer works with iOS 6.1

    As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
    Now, all I get is a constant "Reading" indicator and can't get past this point.
    Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
    Thanks

    Try this.
    Go to Settings>General>Date and Time>Set Automatically>Off.
    Set the date one year ahead. Try to get email.
    If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

  • Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

    Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

    You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
    First you will have to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
    Then you can install PSE from scratch.

Maybe you are looking for