Green light blinking continously on Airport Express

Hi,
since 2 days after software update on Mac OSX10.6.8 I've got my AEB down.
The green light is blinking continuously.
I tried all what i could find on the net :
- reset via utiltiy : Airport Utility 5.6.1 doesn't show any network, neither options, tab, buttons or what so ever.
- software reset of AEB : green light still blinking
- hardware reset of AEB : the same, no orange after 1 second
- reset AEB to default : the same, no orange after 1 second
Internet is ok via Ethernet cable thru the DSL modem.
I would like to understand if it is a hardware trouble or firmware/software trouble.
After pushing reset button of AEB, it is written that led blink orange after 1 second. Does it mean the hardware is kaputt?
Or is it an update of the firmware that went wrong?
Thank you.

I saw this post https://discussions.apple.com/message/17298925#17298925
though i'm still in wonder.
Because status light don't mention green blinking as a fault but as "normal" :
"Si vous choisissez l’option Clignotement en cas d’activité dans le menu local Voyant d’état (dans la sous-fenêtre Borne d’accès des réglages AirPort de l’utilitaire AirPort), le voyant d’état clignote en vert pour indiquer un fonctionnement normal."
that i translate in :
if you select blinking option in case of activities in local menu Status led (in sub-windows "Borne d'accès" of tuning Airport Utility), the led blinks green to say working normally.
But operating guide says "Flashing green : AirPort Express is starting up. The light flashes for one second."

Similar Messages

  • How can I turn off the green light indicator on my AirPort Express?

    How can I turn off the green light indicator on my AirPort Express? It really annoys me.

    The Zed,
    You have two options and you probably won't like any of them.
    Using the Airport Utility, click on the AE then "Base Station", then "Options". That will bring up two options for you AE green light, either keep it green at all times or only light up when it is being used.
    The second option is put some tape over it.
    Hope this helps.

  • Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

    Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

    If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
    Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
    If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
    Post back on your results.

  • My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • 42TL515U green light blinking but no picture or sound

    came home today and turned on my tv wont turn on the green light blinks constantly but no picture or anything can some one tell me how to fix this or what to do?

    Try unplugging it for a few minutes.

  • Isight camera green light blink

    My isight camera green light blinks every two seconds, when I try to use facetime or any other application of isight. And of course, the camera is not working.
    I'm using a Macbook Pro, just bought it a month ago.
    Does anyone have the same problem or have a way to solve this annoying issue?

    Xiunei wrote:...Macbook Pro, just bought it a month ago.
    Does anyone ... have a way to solve this annoying issue?
    Yes.  Your retailer does.  He can either: (1) determine whether your new Mac needs repair or replacement, or (2) show you how to make your camera work correctly.

  • Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

    Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

    Hi Rogerya,
    Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
    How to Troubleshoot iSight - Apple Support
    https://support.apple.com/en-us/HT2090
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    1. See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    2. See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    3. Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    4. Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    - Matt M.

  • What does the flashing yellow light mean on my airport express?

    what does the flashing yellow light mean on my airport express?

    Open AirPort Utility, the application that you used to configure the AirPort Express and click Manual Setup.
    Click directly on the word "Status" (2nd line) and a window will open to tell you why the Express is complaining. What is the message?
    It might be a notification that an update is available for your Express.

  • Camera green light blinking and not working!?

    Camera does not work with any camera app (skype, facetime, photobooth) and green light blinks.
    What should I do?

    Thanks.. but I don't have iSight camera.. my camera is:
    FaceTime HD Camera:
    Model ID:          Apple Camera VendorID_0x106B ProductID_0x1570
    Unique ID:          CC234350W0PF9T9CW

  • Blackberry Notebook -- Red light STEADY, Green light BLINKS 5 TIMES, wont come on

    Ive charged my Playbook for 30 minutes via computer. I tried cutting on the tablet and the red light came on STEADY, then the GREEN LIGHT BLINKED 5 times. It would not power on. I also tried cutting it on while plugged in and the same thing occured. I have tried resetting it by holding the + and - sign for 20 secs and no success. I bought the playbook from Radio Shack NEW in February.  Any suggestions?

    You can Try this and let us know wich solution works...
    If your battery is dead or near dead, you have a problem. If you follow these instructions you may be able to make a recovery but it will take some time.
    The charger is controlled by software. The software will not run because the battery voltage is too low. When the battery is too low and you turn on the PB, It will only run for about 4 minutes and then shut down again. During this 4 minutes, the charger will begin charging but since the battery voltage is still too low, the unit will shut down again and the charger will shut off.
    To get the voltage up sufficiently for the PB To continue, you have to have the charger plugged in and every 5 minutes or so, you have to hold the power button on until the red light flashes then release it.It will once again recharge for 4 minutes. You may have to repeat these steps at least 10 times. Once the voltage gets up a bit, the charger should stay on but it will takes 6 hours to fully recharge the battery. When your charger is charging, it will feel warm to the touch so check it often to see if it is in fact charging.

  • Steady green light on A1084. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it.  Is there a fix?

    Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier.  Is there a fix?

    I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp.  The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express.  It would be nice to play Airtunes while simultaneously accessing the Internet.  I don't understand your question about what program I am using for which I require AirPlay.  I am not learned about computers in general, and even less so about Macs than PCs.  I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier.  I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo.  I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

  • Why is yellow light flashing on my airport express wifi

    Why is yellow light flashing on my airport exress wifi

    Why is yellow light flashing on my airport exress wifi
    You can find out by opening AirPort Utility on your Mac or PC and clicking Manual Setup
    Click directly on the word "Status" *(2nd line on the summary page) and another window will open to explain why the light is flashing....and offer some suggestions to remedy things
    If everything else seems to be operating correctly on your network, it might be a message that an upate is available for the AirPort Express

  • No light at all on airport express?

    My airport express acts like its getting no power? suggestions other then trash it?

    It may just be possible that the LED has burnt out, but the base station itself is still working.
    At this point, I would suggest trying the following:
    Double-check the removable electrical prongs are securely attached. I would go ahead and remove and replace them just to be sure.
    Connect the AX to a different power outlet.
    Perform a "factory default" reset on the AX.
    If none of these help, take it to your local Apple Store to have them take a look.

  • Light too bright on Airport Express?

    Works perfectly!

    Cute. If you want something more subdued, stop by the office supply place and pick up some white stickers, Place one sticker over the LED to subdue the light, add more stickers as you wish to tone down the intensity.
    The stickers are virtually invisible from several feet away, so all you see is a subdued, to faint, to very faint green light depending on your preference.

Maybe you are looking for

  • Reading XML file from package!!

    HI, I have an xml file with two HIERARCHY levels with Global and local <global1> company</global1> <global2> address </global2> <global3>name </global3> <global4>position</global4> and -- *<loca1l/>* <local2> CEO</local2> -- *<local3/>* <local4> supe

  • Bridge CS4 - problem with yellow  thumbnails

    I've installed Bridge and Photoshop CS4 and am having a problem with very yellow thumbnails (I still have CS3 installed and this is NOT happening there with the same images). I'm running on a a Windows Vista Service Pack1 platform. When I download my

  • NSS issues and can't do any administration

    Hello all, I hope this is not a re post, I have searched on the forum and Google and can not find anything and am in dire need of some help! I have a SLES 10 SP4, with OES 2 installed on it. It also runs Groupwise 2012. I have NSS setup and configure

  • "No movie in file" error

    Hello, I stopped an export in process (exporting using QT conversion) and now when I try to export again it gives me this error after a few seconds: No movie on file. I've tried the following so far from what was found online: I deleted the rendered

  • Change flags for Library unhidden in external drive

    I have a clients drive that is failing. I have pulled it and placed it in an external case. I can get it to mount out of the machine in the external HD case. I have restored the data except in the hidden home library which is 10 days old from the las