Green light but doesn't work

I have 2 original airport expresses. They are both doing the same thing. I reset and use airport utility to set up to join my existing network (to run amplified speakers). The green light comes on, it works fine for maybe 15 minutes and then stops working and disappears from airport utilities. The green light stays on. I can reset and start over and it does the same thing. Both expresses act exactly the same. Please help. Thanks.

PS. I have a new Airport Express hooked up to another set of speakers and it works fine. And I have had it hooked up to the speaker's the old express is having trouble with and it worked fine. Do these airport expresses just wear out?

Similar Messages

Why does my airport base station show all green lights but doesn't connect to the internet?

I have an Airport Express Base Station that has been working beautifully up until this morning. For no apparent reason (changes in ANYTHING), I cannot connect to the internet through it. Here's the situation:
The light on the airport is solid green.
Aiport Utility shows all is well...the base station shows up, with green light, IP address, etc.
Network Diagnostics shows "your connection to the internet seems to be working correctly."
Connecting the modem directly to the computer via ethernet cable works fine...internet humming right along.
Connecting the modem to the base station doesn't work, even though all green lights and "all systems go" diagnostics.
Wireless access via iPhone and iPad not working, either, so definitely not computer-based issue.
No changes have been made to anything. I'm running 10.6.8 on a 2007 MacBook Pro.
Can anyone help?
Thanks,
Nancy

Hi Bob,
Thanks for responding.
Does that IP address start with 169, or something else?
The IP address starts with 10.0...
Does this mean that the iPhone and iPad can connect to the wireless network....but not get to the Internet?.....or.....does this mean that the iPhone and iPad cannot connect to the wireless network at all?
They can see and connect to the wireless network, but aren't connecting to the internet, just like my computer. Sorry for not being clear about that.
Can you look on the side of the AirPort Express to locate the model number? Hard to see, you may need a magnifying glass. Starts with an "A" followed by four numbers, as in A1264, or A1084, for example.
The model number on the Airport is A1392.
Any insights based on this info? Thanks for your help.
Nancy

Bought an Airport Express in Slovenia, planning to use it in Moscow. When configuring, Moscow is not an option for location. I ticked Ljubljana for set up; got green light, but network not working. Is choice of city the problem?

While on vacation, I bought an Airport Express in Slovenia, planning to use it in my Moscow apartment. I plugged everything in, seem to have followed the directions properly for configuration - except for one thing. Moscow does not come up as an option for location. So I tried ticking Ljubljana (Slovenia) as location (since that's where I bought it). The cycle seemed to have worked, I got a green light on the Airport Express, but the network didn't work. I tried going in to change the location, and chose something called Universal, but the network still didn't work.
Is the fact that Moscow doesn't come up among the options going to be a problem? Or is it possible I am doing something else wrong?
Anyone have any insights?

AirPort Utility for the iPhone, iPad, etc does not support the older version of the AirPort Express that you have.
Try installing AirPort Utility on the Lenovo laptop to see if you can configure the AirPort Express that way.
If the laptop runs XP SP3 or Vista SP2.....use AirPort Utility 5.5.3 for Windows - Support - Apple
Windows 7....use AirPort Utility 5.6.1 for Windows 7 - Support - Apple
Remember that the SB5101 modem must be fully reset before it will associate correctly with the AirPort Express. That means pressing the reset button on the back of the modem (if present) and powering off the modem for at least 30 minutes, then connecting it to the AirPort.

Green light but peripherals not working.

peripherals not working.
My G5 ( Tiger) is plugged directly into the AE ( airport extreme version 7.3.2) , I have a green light and the G5 is connected fine to the internet.
On the other hand I have another computer which is connected to the AE via Ethernet and its not seeing the internet. Also my iphone and laptop do not see the network or single. For example when I have my wireless devices check for networks , my network does not show up on the list.
Any idea where to start on this one ?
Thanks in advance !
Richard
Richard WarrenFashion & Beauty Photographer
917.623.5690 Visit online http://www.richardwarrenphotos.com

Yes tried that and also the modem, all combos thereof. I think I need to go back to old version based on what I read above
thanks

AX green light, but airtune does not work

I just bought an AX. The main purpose is to use airtune and to share printer at home, and to bring it to create wireless network when I am on business trip.
When I first set up the AX, or later do a reset, the setup program can find AX. I use airport admin utility to set up the following:
Airport tab:
Wireless model: join an existing wireless network (wireless client)
Wireless network: I choose the current wireless network I have at home.
Internet tab:
Configure: Using DHCP
I clicked 'Update' button. The status light became green, but airtune does not work. I did not see the button show on iTune for me to choose the speaker. I went back to Airport Admin Utility, but could not find AX at all.
I googled for possible solution, and saw concern regarding DHCP, so I tried:
Internet tab:
Configure: Manually
IP address: 192.168.0.30. My wireless router assigns IP from 192.168.0.2 to 192.168.0.33
Subnet mask: 255.255.255.0
Router address: 192.168.0.1
DNS server: 192.168.0.1
After updating the information to AX, I have still the same issue: green light, but no airtune, Airport Admin Utility cannot find the AX.
My wireless is a gigabyte. Please help. Thanks.
Message was edited by: sfmech

Sadly I can't help, but i can confirm: I am having the same problem. AirTunes was working fine, up until I went away for a month -- have just returned, and now am getting the same problem with TWO Airport Express units, which makes me think it is some kind of software update issue?
Will keep looking into it, and will let you know if I find anything.

I am extending my airport extreme by adding an airport express. I had no problem setting it up and got green lights but now I cannot get on either because it says it is a self assigned IP?

I am extending my airport extreme by adding an airport express. I had no problem setting it up and got green lights but now I cannot get on either because it says it is a self assigned IP?

i am extending my airport extreme by adding an airport express.
Does this mean that you are connecting the AirPort Express to the AirPort Extreme using a wired Ethernet connection....or....are you connecting the AirPort Express to the AirPort Extreme wirelessly?
but now I cannot get on either because it is a self assigned IP?
I suggest that you first concentrate on getting the AirPort Extreme working correctly. Power off the modem and both the Extreme and Express, wait a few minutes, then power up the modem and let it run a few minutes. Then, power up the AirPort Extreme and check the network for proper operation. Leave the AirPort Express off for now. Report on your results.
We need to know what operating system you are using on your Mac or PC in order to provide more troubleshooting help.
If you have a Mac and do not know what operating system you are using, click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X version number that you see there.

Green light but won't discover

I am having issues connecting my airport extreme. My AE has been working fine. I disconnected and brought it to Alaska. Hooked it up and got green lights, but was unable to connect to the internet. I reset modem and AE no success. Tried using ethernet thru the AE but that didn't work either. Deleted relative passwords in Keychain thinking it may be causing a problem, but that didn't work either. the last time I was here I used an older model airport and didn't have any problems. I am trying to connect via a GCI modem. Box shows IP 169.254.47.96. I am wondering if I should manually put in a 255 address? Any suggestions? I can hook up via ethernet from modem directly to the computer.
Kenny

It sounds like the modem still "remembers" the previous device connected to it and is not recognizing the AirPort Extreme Base Station (AEBS).
Please try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
o Power-off the modem, AEBS, & computer(s); Wait at least 10-15 minutes. Note: Order is not critical.
o Power-on the modem; Wait at least 10-15 minutes.
o Power-on the AEBS; Wait at least 5-10 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Time Capsule has green light, but unable to access the internet

My Time Capsule has a green light, but all devices (wired and wireless) are not allowed out to the internet.
When I connect my iMac directly to my internet router, I am able to access the internet, so I have isolated the issue to the Time Capsule.
The Time Capsule receives an IP address from my internet router via DHCP and I can see this address in the Time Capsule config, but for some reason the Time Capsule is not allowing internet access to both wired and wireless clients.
Thank you.
--SN124B

Verify that you have a working Ethernet cable.
Then verify that the Ethernet cable is connected from one of the LAN <-> ports on your main router to the WAN "O" port on the Time Capsule.
Check again to make sure that the Time Capsule is configured in Bridge Mode
Power cycle the entire network as follows:
Power off all devices in any order you want
Wait a few minutes
Start the modem or modem/router first and let it run a full minute by itself
Start the main router next the same way
Start the Time Capsule the same way
Continue starting devices one at a time until everything is powered back up
Check the network

Airport Express shows green light but NO Internet

I am using a Macbook Pro and an Airport Express for my Wi-Fi.
I have recently changed my Internet Service Provider. The new ISP provided me with the following information:
1.IP address: 172.100.11.17
2. Subnet mask: 255.255.255.0
3. Default Gateway:172.100.11.1
4. Preferred DNS: 172.16.0.1
5. Alternate DNS: 8.8.8.8
My ISP told me to enter this information manually unlike my previous ISP who used DHCP.
I entered this information by going to system preferences >> Network >> Advanced >> TCP/IP >> Configure IPv4: Using Manually. I also entered the preferred and alternate DNS information under DNS servers in DNS tab.
I applied these settings and the airport express shows solid green light but gives NO access to internet.
I have also tried connecting the Ethernet cable directly to the computer, which also shows connected but gives NO access to Internet.
I borrowed another router from my friend (not apple) and entered the same settings given by my new ISP and boom !!! I got connected to the internet only through wirelessly BUT no connection again using the ethernet.
So I am facing the following problem in Mac OS X (10.7.5)
using
Airport Express: NO internet
Ethernet: NO internet
Other Router(non-apple): Internet works using Wi-fi
Ethernet: NO internet
I do not know if something is blocking the connection or what is happening. I have created new locations (under network) and deleted the old existing one's but nothing seems to help. I also did a hard reset of my Airport Express but nothing seems to help.
Please help me !!!

I am using a Macbook Pro and an Airport Express for my Wi-Fi.
I have recently changed my Internet Service Provider. The new ISP provided me with the following information:
1.IP address: 172.100.11.17
2. Subnet mask: 255.255.255.0
3. Default Gateway:172.100.11.1
4. Preferred DNS: 172.16.0.1
5. Alternate DNS: 8.8.8.8
I am able to connect to the internet now directly using ethernet cable but my airport express wouldn't let me connect.
I must be doing something wrong with entering settings in Airport Express. The ISP technician is as clueless as me and had even did some changes under Wi-Fi in the network section on my macbook pro. I dont know if it is causing these problems. I have a few questions, please help.
Q1. While entering the ISP provided details using Airport Utility, which of these should I choose: A. Static B. DHCP C. PPPoE ?
Q2. Should my MAC address in the Airport Utility be set to configure manually or automatically ?
Q3. What should be my Wi-Fi settings in my computer ?. I mean in system preferences under network, should my TCP/IP set as DHCP or manually ? Under hardware tab, there is an option to select MAC address as either Automatically or Manually. What should it be ?
Please Help !!!

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon..............

HT4314 Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

Contact iTunes
Contact iTunes

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can se

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why??

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.

Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either...

My ipad lighting charger doesn't work dose apple care cover this ?

My ipad lighting charger doesn't work dose apple care cover this ?

The charger is covered by the one-year warranty.

Green light but doesn't work

Similar Messages

Maybe you are looking for