Green Line and black Space on Mac Mini TV

I am getting a green line and a black open space on the side of my Mac Mini TV when I set it up. I have tried every different resouloution and it is still there. The problem is that when I click Detect Displays, nothing happens to the screen.
Please help, I just got this today and I want it to function properly ASAP for a Project I am doing.

What kind of connector is it using?
DHCP seems to be a problem, do you have a DVI or VGA adapter & does the TV have that?

Similar Messages

Startup screen has green lines and black box asking to restart

When I try and start my computer, I get a series of vertical lines that go from pinkish red to green. Then a black
Box appears telling me I need to restart in different languages. My computer is fairly old, does anyone know if this problem is fixable? Is it a part that can be replaced?

clintonfrombirmingham wrote:
Which model do you have? If a mid-2010 15", there are known problems with the GPU and the logic board will be replaced free.
Clinton
The Mid 2010 15-inch MacBook Pro problems are related to kernel panics, so the GPU is still working. In the case of the OP, the GPU has stopped working completely, so his/her problem doesn't belong to the kernel panic problem, so the OP may have to pay. I may be wrong.
Also, the 10.8.4 update won't help as this is a hardware problem, but it's always good to keep OS X updated

Macbook Pro screen showing green line and blacks out all the time

My macbook pro have been recently showing green horixontal line all over the screen at times , and it goes away after restarting couple of times, after i log in the screen black outs after couple of minutes and sometimes the screen act weird

I would suspect that there is a hardware component failing. I would take it in for diagnosis.
Barry

Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?

Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?
I use a Mini as the family media center and would like to have 5.1 or 7.1 sound for films but don't want a huge piece of eletronic equipment (I have one of those, but it isn't hooked up because it doesn't fit on the bookshelf). Years ago I used a PC and still use the Creative Audigy speaker system (Jimmy rigged to the Mini) that I ran from the PC. The Audigy PCI sound card obviously doesn't work on the Mini, so I just have two chanel plus sub. That has been fine since I switched to the Mini in 2007, but am updating to a new Mini in the summer and would like to upgrade my sound as well.
I also wouldn't be opposed to a USB soundcard that can drive the speakers. In fact, my wife would prefer smaller and less visible, ergo USB card hidden in the back.
Suggestions?

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

No signal to VGA monitor using Mac mini display to VGA adaptor and first time boot Mac mini

Just unpacked Mac mini and powered up using Mac mini to VGA display adaptor and VGA monitor. There is no signal to the monitor ( power is on).
How to see the display?

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

How can I have the same environment on two macs on is a macbook pro and the other a Mac mini

How can I have the same environment on two macs on is a macbook pro and the other a Mac mini ?

Forget trying to use iCloud for this - it won't do what you want. iCloud syncs certain data like contacts and events, but it doesn't sync "environments" on computers.

Can I use my apple wireless mouse and keyboard with my Mac Mini and Windows PC?

Hello, I recently dug up a windows PC computer for side projects, and I was able to get by using my wireless apple keyboard and mouse for my Mac mini, and then using a usb mouse for my PC, I want to eliminate the usb keyboard and mouse and just use the bluetooth keyboard. Both computers are usually on all the time, and the windows PC uses a bluetooth adapter. I can get my keyboard and mouse to work on both, but I have to sync them to whatever system I would like everytime I want to use it. Is there any solution that when I choose the Mac Mini my keyboard and mouse will work for the Mac mini, and when I choose my windows pc, the keyboard will only be used on windows without having to resync?

To my knowledge, no.
Barry

The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.

The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.

If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

Hi there,
The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
AJ

I have a late 2012 iMac and a late 2009 mac mini. I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.

I have a late 2012 iMac and a late 2009 mac mini. I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.
According to Cruicial my mac mini could use:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64
Also According to Cruical my iMac uses:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-12800
Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V
I want to increase the ram in both computers.
So, can I put the iMac ram in my mac mini and then I'd only have to buy ram for my iMac? Naturally the ulitmate test will be when I actually install it, but having an expectation of success or failure will allow me to plan on what to spend money on.
Thanks,
Bear

Thanks for the responses. I probably wont even try as my priority is Ram for the mac mini. 2 is not enough. 8 for my imac is okay for now.
Somewhere I thought I'd heard that faster Ram would simply clock at the lower speed. It seems that I am incorrect.
Thanks,
Bear

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

Is this happing because the external is formatted to PC and not mac?
Yes that is correct.
Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
regards

I plan to purchase a Mac mini and then a new iPad. Can I use the iPad as a monitor and keyboard for the Mac mini, either through the USB connection or thru Wi-Fi?

I plan to purchase a Mac mini and then a new iPad. Can I use the iPad as a keyboard and screen for the Mac mini, using either the USB connector or Wi-Fi?

I'm sorry, I should have said thru Bluetooth, not Wi-Fi. I want to use the mini as a base station and the iPad like a laptop that I can sync when I'm home and carry with me when I travel. Is is possible to hook these 2 up - iPad/mini, through Bluetooth? I understand I need to use a regular monitor/keyboard/mouse on the initial install.

I just purchased Apple USB SuperDrive and connected to my Mac mini 2012 but does not show anything on the screen. Not sure if its working.

I just purchased Apple USB SuperDrive and connected to my Mac mini late 2012 USB slot but nothing shows up on the screen.
I have OS X versus 10.10.3

The system bus and all connected products should appear in the system profile or in the
hardware part of About this Mac (more info) and if that does not, restart the computer with
the external Apple USB SuperDrive plugged in. •As a last resort, if nothing else, before a
return trip to be rid of the SuperDrive, you could try a system management controller reset.
The SMC reset is not a first choice, so I won't post a link to the support instruction page.
A new Apple USB SuperDrive should be seen as hardware in system information report.
Of course, an icon of disc media should appear once the disc is inserted into the drive, too.
Good luck & happy computing!

Is there any way to connect my Apple wireless/bluetooth trackpad and keyboard to my Mac Mini without using a wired or usb keyboard?

Is there any way to connect my Apple wireless/bluetooth trackpad and keyboard to my Mac Mini without using a wired or usb keyboard?

Well, I read that already, but I am trying to start up my Mac mini(new purchase) and I cannot get to all the system preferences etc since I cannot get past the startup screens. The site also mentioned waiting to turn on the keyboard until a language was requested. Neither language screen worked. I feel as though I'm just about ready to throw in the towel.

HDV sequence has green lines and pink dots after export

I digitized some HDV footage from a Sony HVR-VIU into Final cut Pro 7. Everything worked normally through the edit. After exporting the sequence as a quicktime movie, it played back fine as a quicktime. When I attempted to convert it to a media file in Sorenson Squeeze, the file showed up with green lines and pink dots over the picture. To test it differently, I dropped the file into IDVD. Same, result in playback. I've never seen anything like this before, any ideas?

Brad your article was extremely helpful in getting my sequence to work for a DVD. However, I've had success before using the same camera, format, etc., in making DVD's from an HDV sequence, and I'm curious as to what I did wrong this time. The most confusing part to me is that the original quicktime self-contained export played fine through quicktime, but got funky when placed into IDVD and Sorenson's Squeeze compressor. I must have done something wrong up front in digitizing or making settings in FCP, and I'd like to know what it was so I don't do it in the future. Thanks.

Green Line and black Space on Mac Mini TV

Similar Messages

Maybe you are looking for