Green line on the side of my export from an image sequence

I have created an image sequence
at 1024x768. I bring it into PP CS4 and on the far right side there is a green line running top to bottom. The timeline is the same size as the image sequence. What would cause this and how do I get rid of it?

Have a look at this thread: http://discussions.apple.com/thread.jspa?threadID=1802274

Similar Messages

Thin green line at the bottom of my QT exports from FCP

Hello,
I have exported a series of QT vids from FCP. Each QT video file exhibits a thin (2 px)green line at the bottom of the player window. I can't seem to narrow down what is making this line appear. Can you please offer some suggestions? Remedies?
Thanks so much in advance.
Utilizing:
Quicktime Conversion
optimized for broadband Large
H.264 codec for HD footage
Custom 660x377 frame size (varied to see if that would fix the issue, did not)

So you only see it in QT Fullscreen mode?
The reason I'm pressing this is that I've seen green lines LIKE this with issues resulting from what seems like a very hot video card.
Usually they 1) aren't that crisp and 2) don't always show up each time you view it.
And this is AFTER compression, yes? For sure this isn't on the original material? Make sure you set your canvas in FCP to 100% size to see all of the lines.
CaptM

MBP display is showing a thin green line on left side of the screen

Hi All,
I have 15 inch Unibody MacBook Pro bought in late 2009. Specs are as below. Initially it was 4GB RAM. I upgraded it later to 8GB OWC RAM.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,3
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP53.00AC.B03
SMC Version (system):          1.48f2
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          Display
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3448
gMux Version:          1.8.8
Displays:
Color LCD:
Resolution:          1440 x 900
Depth:          32-Bit Color
Core Image:          Hardware Accelerated
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Built-In:          Yes
Display Connector:
Status:          No Display Connected
I bought Lion from App Store recently and installed it successfully on my MBP. After few days when I left my machine running Lion from morning till evening I see a thin green line on the left side of the screen. I tried searching the web and tried few options like restarting the machine, resetting NVRAM and doing Apple hardware test (By pressing D while the machine boots). The Apple hardware test did not detect any problem. The green line still exists.
Please suggest me how to get rid of green line.

Hi Brent,
I took it to apple service center. They did some checks and found out that the display has gone bad and they replced it with new one.
Did you try connecting other display (may be Apple Display or Dell monitor) using an adapter? In my case the Apple service center people tried doing it and the display was appearing just fine without any green line. So the fault was in my MBP display.

Green Line on right side of exported video Premiere Pro

Hi, when I export my footage I am seeing a slight green line on the right edge of the frame, no matter the media player and is visible as well on youtube and vimeo uploads. I am making sure it is exported at 1280x720 as that is the aspect ratio I am recording at on my GH2. The GH2 are avchd files or .mts files natively, so when I import them I convert them using Adobe Media Encoder set to ProRes 720 60fps. This green line does not occur on every clip when I export, just the majority of them. I am also using Premiere Pro CC 2014 with the latest version updated. Please help!

Yes looks very similar to what I am getting with the cube transition.
It is probably something to do with the MPE and Direct X or Acc Graphics used to process the clips during the transition, only a guess for a non programmer like myself lol.
Yes, bet it is one of those bugs that has slipped through, when viewing as a screen shot it is hard to see it at stop so possible more so even in motion, but yes it is there and as I posted in my other thread, I am seeing it also, I am not green screening neither.
As say, for TV's then probably 99% of the time it will be hidden in the overscan area but for some and for Web Based viewing, I as you, would rather it not be there.
As say it is kinda like the feature in EDIUS Called enable transition handling in over scan, where the default for a new project is set at 3%.
Anyway, I have kinda solved my problem with the cube spin transition by subscribing to Red Giant Universe at $10 a month, they have a nice set of transitions that work well in premiere Pro CC, I am currently on version 8.0.1. Though I do plan on upgrading as and when to the newest one 8.0.2. Though doubt that the original issue has been fixed, but for now, I am using Red Giant.
FInally, I notice that if I click on the settings box in Red Giant Transitions, then it crashes Premiere Pro with this message, so I avoid doing that, but still work mentioning, probably should put this into a fresh post of submit bug report, I will also contact Red Giant to make them aware of it also.
Premiere Pro has encountered an error
[..\..\Scr\AESupport.cpp-86]
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Pro.exe
Application Version:    8.1.0.81
Application Timestamp:    5426694c
Fault Module Name:    MSVCR110.dll
Fault Module Version:    11.0.51106.1
Fault Module Timestamp:    5098826e
Exception Code:    40000015
Exception Offset:    00000000000740da
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    2057
Additional Information 1:    9bca
Additional Information 2:    9bca88f85e8c36e7d86179cefb863392
Additional Information 3:    e5c7
Additional Information 4:    e5c75cdca8ef833efce9f20f61f3f27a
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Green lines on the edge of my video

Hello,
I have a problem with premiere pro cs6 every time I export my video I get weird green lines on the left and bottom sides of my video. Does anyone know what might be the problem? I'm working with different aspect ratios and frame rates in my timeline but I heard thats ok. This has been a pain since every thing is ok only the green lines on the edge of my video ruin my viewing experience. Thanks for anyone that can shine the light on this little problem I'm having.

I'm having the same problem.
I have been editing a single interview into four separate videos. Of those videos, only one doesn't have the green line at the bottom of the screen. I'm exporting it as:
Format: H.264, HD 1080i 29.97 preset
Video (changes): 480x270, target bitrate 2, max bitrate 3
Audio (changes): bitrate 160
Sequence was preset for HD 1080i 29.97, but I changed the frame size to 640x360. I've done this all before and never had any problems and I don't know what to do. I've tried re-editing the footage, but it still ends up with the same result. Any ideas?

When I open pages it scrolls through various numbers of blank pages with a line at the side, then stops at a document, but usually an old document. I have to go to "open recent" to get on the page I want.

Hi
When I open Pages it scrolls through numerouss blank pages with a line at the side 1st, then settles on an old saved pages document.I then have to go to "open recent" to select the one I want. Why?

No
It's the 1st version of Pages I've had on my computer.
Can't delete them as they scroll through them at a rapid pace. The longer I've had the problem the more blank pages it scrolls through.

How do I get iCal to print the calender just as it appears on the screen, not as lines down the side to indicate length of event? I like the whole bubble of time approach as it is on the screen.

How do I get iCal to print my calendar just as it appears on the screen? I like the whole block-out method rather than just a line down the side indicating the time devoted to an event. Is there any way to change the style of how it' sprinted?

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

My MacPro 10.6.8 has a thin green line on the screen.

My MacPro is just over a year old now and I have a thin green line on the screen. I hooked it up to my TV and on the second window (the TV) the green line wasn't there. Whats the issue? How do I fix it?

From what you are saying, sounds like a line of pixels out on the display.
Did the TV use the same connector on the computer? If not, swap the display with the TV. If you still have the line, it is one of the items that you swapped across.
Have you tried connecting the display to another computer? If so, is the line still there?
What kind of display is it? Can you swap the data cable and try a different cable, could be a cable issue.
Any adapters in use? If so, try swapping those to rule them out as a problem.
Did the TV use the same connector on the computer? If not, swap the display with the TV. If you still have the line, it is one of the items that you swapped across.

HT201177 MY MACBOOK PRO IS SHOWN GREEN LINE IN THE CENTER OF THE SCREEN

MY MACBOOK PRO IS SHOWN GREEN LINE IN THE CENTER OF THE SCREEN

It is probably a display or display connector issue. To check this, take a screenshot of the display by pressing Command, Shift and 3 keys. Then, open the screenshot created in Desktop, and see if the line appears. If not, it is a display issue.
If you have not got a MacBook Pro with Retina display, you can repair this yourself. You just need to look for the display connector of your MacBook Pro model in the Internet and install it, and if this does not work, you have to replace the whole display.
However, if you do not know a lot about computers or your Mac is in warranty, you should take the Mac to an Apple Store or reseller to get it repaired

I am getting a weird green line at the bottom of my screen...

I am trying to burn a DVD in iDVD.
I keep getting a green line at the bottom of the screen. I tried "squaring" the pixels before outputting the project, but I didn't render the project this way in FCP before trying that.
Could that be the problem?
I also tried buring at 1x.
Any help would help!
Thank you,
Evan Jacobs

Well to answer the questions. This artifact is in fact a physical one because you can see it when you boot the Mac and sign in with a different profile. I decided to test my luck at the local Apple Store just to see what they said. They looked at the display for about 3 minutes and then said that it would be nearly 700 bucks for parts and labor to basically put a new display on my laptop. He said that since its a TFT screen chances are on of the layers within the screen are messed up hence I see this black line. I decided Im going to look elsewhere and see if I can't find a solution here. If worse comes to worse, then I'll live with it till the Pro Book is out and get that with Apple care.

My nano has a green line down the screen

My ipod nano is not even a year old and suddenly has a green line down the middle of the display.
I plugged it in to my Mac desktop and restored it using iTunes but that didn't help.

Could be the graphics card.
Run the Apple Hardware Test

When capturing video; how do I get rid of the green lines at the bottom of the frame?

When capturing video; How do I get rid of the green lines at the bottom of the frame?

s.haider
You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
And, the general drill for all users of Premiere Elements 8.0
a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
b. Are you working from the 8.0.1 Update version of the program?
Please consider.
We will be watching for the outcome.
Thank you.
ATR

Why do I have green lines across the screen

This morning hubby turned on iPad and it has green lines through the screen. It is also circling the apps. Could this be a pixel problem.

There is no need to bang or drop the iPad!! Read this solution. Read the whole thing.
If your iPad is still under warranty, I have heard that Apple will simply exchange it for you. That is not necessarily an ideal option, as many people do not want to have to bother with transfering all of their files to a brand new device.
My problem, however, was that my iPad was no longer under warranty when this occurred. I was so sad, because the warranty is supposed to be for a year. My mother bought it for me as a gift last Christmas, so it had not even been out of the box for a whole year when this happened. Nevertheless, since my mother bought it in October, the warranty had *just* expired, since they go technically by the purchase date.
Apple offered to fix it for me for $300!!!! A ridiculous price for a loose wire inside. I simply am not in a position to spend that kind of money, and if I was, why not get a new device at that price (NON-Apple!). I was very upset, but I didn't give up on it. I scoured the Internet for an affordable solution, I found one, and it worked!!
The problem is caused by a loose cable on the inside, simple as that (can you imagine they ask $300 for the fix!! After all I have invested in the App store, and buying the Apple keyboard to boot!!!).
The fix I found is simple, I did it, and it worked for me. It is the same repair a professional would do in this situation.
The following video demonstrates how to open your iPad. Warning! This is a do-at-your-own-risk solution! But I found it quite easy. Watch the video (which actually demonstrates the entire process of replacing the screen),
http://www.youtube.com/watch?v=MG5HhdeP_VY
Obviously, for our issue, you will not remove your screen. Simply disconnect the two cables as shown in the video, and reconnect them!! Simple as that! Then just reassemble it according to the video.
I purchased the prying tool and screw driver and latches from sw-box.com -- for under $20. I think it comes from Hong Kong, but it only took 8 days to get to me in TX, USA.
I hope this helps someone else.

Why is there a green line at the top of videos I shoot on my iPhone 4s?

I got my iPhone 4s at launch and have been pretty happy with it. One thing that is bugging me however is the presence of a green line at the top of every video I have shot so far. The green line doesn't show up while shooting the video or playing it back on the phone but when I play it back on my computer its there. I've tried several computers and also made sure I was on the latest version of QuickTime and none of that has helped. I don't see any settings in QT that make it go away.

I need to make a correction it is the upper left for the camera.
It is also strange if I start recording in this position I can turn the IPhone around while recording without having the green line.

HT4489 I am trying to import vcards, they are very simple - a name and contact phone number. No pic, no ancillary information, but I get an error then directed to this completely unhelpful page. The vcards are standard exports from another phone.

I am trying to import vcards, they are very simple - a name and contact phone number. No pic, no ancillary information, but I get an error then directed to this completely unhelpful page. The vcards are standard exports from another phone.

Try creating the vCard with the app My Contacts Backup, email it to yourself, then open it on your phone and tap the attachment to import the contacts.

Green line on the side of my export from an image sequence

Similar Messages

Maybe you are looking for