Green matte superimposed over m2v compression

First off, I'm new to the 12-core, coming from 4 years on a 24" iMac with few issues... and im quickly discovering a bigger beast means more of a mess.
When I add a full raster proress HD file to be converted for an SD DVD, the job is successful, however a green matte is superimposed over the m2v. I have the same problem exporting using compressor out of my fcp project. I use the 90min mpeg-2 dvd preset. So: ntsc format, two pass VBR best, IBBM closed, GOP size 12. Now, when i change the steam usage the compression is successful. Obviously though, id like to create the highest quality video for the SD DVD burn.

I am still in search of a solution. Now an issue for a new project...nothing is different about this project than others. Besides maybe a few effects.  Is it possible my GPU cannot handel the encode?  I'm assuming the vinette filter is the culprit...
I also thought encoding m2v's from an exported master would bypass the problem, but still I get a green screen covering 80% of picture when attempting to export out of compressor.
Anyone with advice out there??

Similar Messages

  • I have a first generation iPad and the screen went completely green on me and locked up.  I was able to unlock it, but now there's a green haze all over the screen.  Anyone know what the issue could be and how I can get it fixed?

    I have a first generation iPad and the screen went completely green on me and locked up.  I was able to unlock it, but now there's a green haze all over the screen.  Anyone know what the issue could be and how I can get it fixed?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
     Cheers, Tom

  • Why are the words - "EVGA PrecisionX 16 v5.2.0" is being superimposed over all tabs? e.g. when I click on Help at the top

    the words - "EVGA PrecisionX 16 v5.2.0" is being superimposed over all tabs. e.g. when I click on Help at the top or Tools or Messages or right click on "from" in an un-opened email in preview etc etc. Yes I do have it (EVGA PrecisionX 16 v5.2.0) installed. It happened after latest update.
    Thank you

    the V31 update enabled hardware acceleration. In your case I think it may be it is displaying a bug in the ECGA software that simply was not seen without hardware acceleration.
    I explain how to turn off acceleration here https://support.mozilla.org/en-US/questions/1012145

  • I have loaded FF twice, and on the START PAGE I get small arrows superimposed over the word "WEB". It looks like a mistake.

    There are 3 up/down arrows over and superimposed over the
    word WEB on the start page. What use are they? It looks like
    2 small rectangles with info in them, and both trying to occupy
    the same place.
    Thanks for your help.

    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
    You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Cmd+B on Mac).<br />
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
    Make sure that "Load this bookmark in the sidebar" is not selected.
    Does it help if you open other content like the bookmarks (Ctrl+B) in the sidebar and close the sidebar via the close X?
    You can also check for problems with the localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • I can't access the App Store icon. It opens but a large delta airlines app is superimposed over the top of the App Store updates icons and is locking the entire app. How do I delete it?

    I can't access the App Store app. When I tap the Icon, a large Delta airlines app is superimposed over the top of everything and freezes up the entire App Store. how can delete this large app and where did it come from.

    Quit the App Store app and reset your iPad.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • All my puchased TV Shows Play with small green dots all over the screen!!

    Hi Everyone,
    After installing the latest version on Itunes from System Update all my videos play covered with little green dots... Whats up with that??? Also I usually down load two epesodes of LOST before watching because one just isn't enough. Well aside from having little green dots all over the screen one of my Lost episode wont play at all... "Par Avion". It shows up in my Lost folder under TV SHows but it doesn't show up in my Purchased items. When I click on it it wont open either... However the lastest LOST, "The Man From Tallahassee" shows up and will play?? Itunes Store says I have all my down loads but I have not seen and can not open episode "Par Avion"..... Damm So this is a two part problem. Little green dots and the episode that wont open... HELP!@!!!

    only way I found to fix it it is selecting each episode 1 at a time in order and syncing after each one.
    Season 1 episode 1
    sync
    Season 1 episode 2
    sync
    etc.
    what a pain
    Edit. Actually seams to work if you select each individual episode in the order you want sync'd and then sync.
    Syncing a whole season still results in a jumble

  • Bizarre bug - Letter "A" superimposed over auto page numbers, but only in one font

    I originally saw this on a document upgraded from Pages '09, but I can reproduce it in new documents as well. When using the font Adobe Caslon Pro, Pages superimposes a capital letter "A" over the automatic page number insert.
    Typing other numbers is fine, it's only Pages's automatic page number feature.
    It happens regardless of style: bold, italic, underline, etc.
    It happens on all pages, not just the first one.
    As far as I can tell, it only happens with Adobe Caslon Pro. I haven't tested every last font I have, but every other one I've tried has not had this issue.
    Any ideas on how to proceed? How to check to see if it's a Pages problem or a problem with the font? I really like this font for the document I'm using and am not keen on changing it, or making the page number a different font from the rest of the document. I've attached an image so you can see the bug in action.

    You haven't said, but we presume this is happening in Pages 5 in Mavericks?
    Yes, sorry! Pages 5.1, Mac OS X 10.9.1.
    Have you tested it in Pages '09 in Mavericks?
    Something's wrong with my copy of Pages '09, it can't seem to open any documents (just says "The document _____ could not be opened" every time.). That's why I'm moving over to the new version.
    Is your Adobe Caslon Pro an otf font?
    It is, yes.
    Is this happening with all variants of Adobe Caslon Pro or only one style?
    Every variant.

  • I can't superimpose over a photo or video.... Please HELP!!!

    I am about an hour into an underwater film I am working on. All of a sudden when I go to superimpose text over a photo or video clip it kicks my existing overlays up and wants to put the overlay on it's own layer..... but there isn't anything there. It doesn't show the text but put another working layer onto my timeline. I must have hit a combination of keys or something. I've never had this happen before. I am dead in the water right now and can not continue. Any help would be REALLY appreciated.

    Which version of FCP are you using?
    it adds another layer in my timeline...
    This is supposed to happen. Could it be that you have V1 selected as the active track and already have superimposed other tracks on V2?
    Change the active track to V2 or higher so that the text goes above your other supers.
    Example. The following setting will send your super to video track 2:
    Moving the active track patching button higher will send the super (in this case) to V3:

  • Major green artifacts all over MPG2 encoded video!

    Please help!
    I am trying put four 7 min. movies on four separate DVDs. When I encode my QT files, my MPG2 files are covered with giant green artifacts - so much so that in some places almost half the screen in green!
    I have tried working directly from my timeline into Compressor and working from an exported QT movie into Compressor. I tried both 'fast' and 'best quality' DVD MPG2 settings.
    What can I do???

    Thanks for the suggestions everyone. I took my files to another system, re-compressed all frames using Animation, and had no problems. I think my prefs or RAM may be bad on my computer (bleh), but at least had another station to work with.
    FYI - I also downloaded BitVice, an alternate encoder, and the test worked great. I would have bought that package, had I not been able to find an alternate FCP station.
    Cheers

  • Blue/green screen - superimpose HELP

    Okay, I'm new to this. I need to film two people, a devil and an angel, and superimpose them on another clip on someone's shoulders. Do I have to shoot in front of a special screen? Do I use After Effects and if so how do I do it? How do I extract them? Can any one help me with this? How involved is this? Thanks!

    lighting is critical on
    both subject and background.
    Amen! If the lighting is uneven you'll have difficulty creating the key. You've asked a complicated question so start reading the manual and then you'll have a bunch more to ask.
    For your sake don't jump into this without some basic knowledge or you're likely to have a mess on your hands.
    I once had an employer put a subject in front of a piece of green posterboard and successfully key that video so yes it can be done. You'll have a little more trouble since your shot will probably be head to toe so that the angel can "stand" on someone's shoulder.
    If you have the budget, rent a little time from your local television station and use their "weather wall." Make sure they have a head to toe wall, not all station do.
    Good luck.

  • Flickering Green pixels all over 21" Apple Cinema Display is getting worse

    Has anyone ever had this problem before? I have a 5 year old, not overly used 21" Apple LCD Cinema Display. Just recently, it started having these tiny flickering green dots but only on black fields. Now it is getting worse. I am now having the same problem only this time, additionally, its red on white fields. It goes on and off intermitently. Sometimes, my monitor would just turn GREEN especially after viewing some photos. (I think this monitor was made in Mars or something)
    What is causing this problem? Do I need to get a new monitor or can I still have it fixed? Please help.

    There seems to be a couple of threads on this issue, including:
    http://discussions.apple.com/thread.jspa?threadID=1954716&tstart=0
    In my case, the severity of the flicker varies with what is trying to be displayed. In screensaver mode, for example, there is no flicker unless I choose to display photographs. Problem is also quite severe when I'm in Aperture; less so in Safari.
    I've had the same problem with two separate graphics cards so it must be the cable or the display.

  • Multi-layered compositions creating overly large compressed files

    Hi there community!
    FCP HD 4.5
    I have a composition that involves 3 layers of video and 4 audio tracks. It is only short but when trying to compress a sample for the web I'm having difficulty getting the file size down to something reasonable, like between 3 - 5 MB as with my other clips. I've tried exporting the project in uncompressed format and then trying to compress from that single track file, but FCP treats it just the same as the original. The original has a few effects applied and I also modified the composition mode, so it is somewhat complex. I've been trying to compress to quicktime movie using the following:
    video:
    H.246
    size 400 x 300
    quality: medium
    frame rate: 15 fps
    encode: multi-pass - best
    audio:
    mpeg-4
    Resulting file size is 17 MB for a 1 minute clip. Way too high.
    These settings are ideal for my other stuff, but this clip is more complex. I'm a professional preparing video content for the web. What is the nack for squashing a complex project without losing too much quality?

    You should be using Compressor (moreover, you should upgrade 4.5 to 5.1 before the offer runs out).
    Prior to Compressor 2 (and if I want QT 6 compatible quicktimes), I use Sorenson Squeeze. At high quality, I generally get 640x480 resolution at 4MB for 30 seconds. Or I use Compressor and H.264 LAN.
    Both do a far superior job to straight export from FCP.
    Patrick

  • InfoCube design- partition of chararcters over IC - compression rate etc

    Hello,
    prerequiste for aggregation in an IC is that technical key is identical. technical key is formed of all DIM IDs and
    those in turn are formed by characters in appropriate dimension. That means all characters of all dimensions form up the
    technical key. So I have to organize an appropriate set of characters in an IC to get max. compression rate. That
    partitioingn may result in to many InfoCubes if I consider semantic or project aspects. On the other hand aggregates are also
    a means for realizing compression. Could you support me with guidelines for that or support me with links for this
    subject.
    Thanks in advance
    Oskar

    Arun,
    thanks for your answer but I think I must change my misleading question to get the answer I want to have
    Assumption :
    1) InfoCube A has dimension d1 with characters ch1 and ch2 and dimension d2 has character ch3 and
    ch4.
    2) If ch1 and ch2 and ch3 and ch4 are identical standard aggregation is done ex. sum
    Lets say thats what I want to have as aggregation level and which I get If I compress table F to table E
    Til now I used an IC with 4 chararcters in 2 dimensions. Now I assume that I have additional 20 characters which
    I didn´t organize in Cubes but they are semantical belonging to characters used in InfoCube A. If I pack them in Cube A
    may be I destroy that aggregatio level I want to have ( because now all 24 characters must be identical for case of
    aggregation ) . But if I organize them in seperate ICs may be I get to much ICs.
    How would you solve that modelling ? Would you for example pack all characters into one IC and solve necessary aggregation level with aggregates , because they allow to use a subset of characters in the underlaying cube ?
    Thanks in advance
    Regards,
    Oskar

  • 852 x 480 mpeg2? .m2v Compression Question

    A guy I'm doing some comercial work for has been instructed by a venue to supply thewm with an 852 x 480 mpeg2 file.
    This is throwing me a bit. Is that a simple 16 x 9 or what. I have exported serveral movies in QT at odd sizes but never a .m2v file. I'm having a bit of trouble with it.
    Anyone care to offer some instructions on how to do this properly? Should I use QT or should I use Compressor? I'm particularly clueless in regards to all the photo jpeg settings and such. I've just never had to call to do something in the .m2v format that wasn't a Compressor preset.
    Thanks in advance.

    There'd be no way to even encode an MPEG-2 file with that resolution, as 852 is not evenly divisible by 16, which is the width & height, in pixels, of an MPEG-2 macroblock.
    864 x 480 would be a bit more understandable, as that would be the equivalent of a 720 x 480 16:9 frame converted to square pixels (720 x 1.2).

  • I am trying to download Firefox4, but the Firefox character appears w/ a circle w/slash through superimposed over it. Drap this to app. folder gets me no where??

    I am trying to download Firefox4, but after download the Firefox character appears w/ a circle w/ a slash through it superimposed on top. Drap this to app. folder gets me no where??

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer to use Firefox 3.6, you can get it from http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for