Green Screen AFTER Edit?

I am using iMovie '09 to edit an interview with a green screen. The interview is already cut up and mixed in with still pictures. Is there any way I can still ustilize the green screen tool without having to re-edit since the proper order is to lay down your background first? Thanks in advance for your help.

There are some tools to transfer fcp7 projects to fcpX. Go the app store and do a search for 7toX. I haven't spent much time with fcpX. I did purchase 7toX but didn't have much luck transferring a project successfully. Might have been user error, might not, so I'd seriously suggest that you test your workflow before actually trying to use any workflow.

Similar Messages

Can I change the background for the green screen after my project is completed?

Hello,
My daughter just made a full project in imovie then tried to add the green screen background and found that she has to redo the whole project. Is there anyway for her to add this after the fact?
Thank you,
Heather

If these are purchase movies and not rentals, from iTunes, on your computer, you can select the movie in iTunes, use the key combination command-I to get the info on the movie. A info window pops up. Click the Options tab, a volume slider appears at the top of the window, slide the slider all the way to the the right, click the OK button at the bottom of the window. Then reconnect and sync your iPad, again, to the computer and wait for the movie to update to your iPad, then once everything is complete, eject the iPad from the left hand pane and disconnect. When you play the movie, again, from the iPad, the volume should be louder.
I do not believe you can do this with rented iTunes movies, though as I do not think they are editable as a rental.

Get a red or green display after edit

Hey,
after I installed the new iLife09 packed an my iMac with new installed SL I get sometimes a colored display instead of the improved picture. Sometimes I edit a picture and save the change by got to the next then I go back an the display change in green or red.
Can everybody tell me what is happen? With iPhoto from iLife 06 I didn't have problems before.
Thank you for your help.
Volker

I am quite sure that it is an issue with the editing function itself.
It's not. It affects both iPhoto and Aperture users (and only a small number of either) so that rules it out being an issue with Editing function in iPhoto alone. It's a problem with some graphics cards and 10.6
A formerly edited picture will always show this issue because, as far as I know, after editing not the edited picture will be stored but only the change (positions of the sliders). So recalling an edited image will show the original image, affected again by the change. Proof: hit the button that showes up the editing window with the sliders (I don't know its name because I have a Dutch version) and you will see the former position of the sliders.
Again, incorrect. In iPhoto when you edit a photo an entirely new file - the edited version - is created and stored in the Library Package file in the Modified's folder. Also, the changes made - if they are made by iPhoto - are recorded in the database. Your description you have is closest to how Aperture works.
Nice improvement because now you can go on editing where you stopped before,
Sort of. If you go on editing "where you stopped before" then the edited version is destroyed and a new edited version, incorporating the sum of the changes, is created.
Regards
TD

Aperture Black screen after edits...

After upgrading to Aperture 2.1 I have a strange thing:
After editing a picture the Screen turns completely black. The histogram displays only one spike.
Resizing the window brings back the Image, but the histogram remains only one spike.
Thanks for help
wok

It's a pretty common problem (do a search and you'll see some more topics regarding this). It happened again to me today for the first time in months. Except this time it wasn't the whole viewer but 3/4 of the viewer went black. Only things that were different today: I pressed i to remove the project pane, I straightened then cropped, I adjusted contrast. I rarely straighten and I rarely work without the project pane open. Also I was working while my MBP was not plugged in, and it was quite warm. Still can't really narrow down when it's going to happen.

ATI tvPortal green screen after 10.6.2 update

After updating my MacBook Pro to 10.6.2, when I run ATI tvPORTAL the TV display is green. I have an ATI TV Wonder 650 USB for Mac. It was working fine before (10.6.1). Anyone else having problems?

Same thing here. I already had OS X 10.6.2 and when I installed the original drivers for the TV tuner fm the CD that was included, I had good audio and marginal video. I ran the auto-update on the software and downloaded/installed the latest version of the ATI drivers. That resulted in the same problem everyone else has listed: green screen and audio on all channels. I too tried to back out the update and reinstall the original drivers and now have crappy video and no audio. Tried calling ATI and their help line refers you to a former component supplier who informed me they have no visibility on the Mac drivers for the new ATI tv tuners, and suggested I contact Apple.
It would be ideal if someone could come up with the fix on this issue.

Flickering in top of screen after editing

After editing an project in FCP X there's a small flickering in top of the screen (approx 2 mm.). The recordings are perfect, also after import. So the problem - which I haven't met before - arises after editing in timeline.
Bw,
Jonas

Thank you, Tom.
It begins approx 30 secs into http://youtu.be/tt-l3aJNDiY
Recorded in the same camera I always use (without problems): Canon XA20.
Do you know how I can analyze and fix problems with interlacing?

HELP! CS3 blank green screen after render. with video not stills

hey. it seems that i have the same problem that other users have found when they have lots of still photos in a timeline and that is once you render they are just replaced with a blank green screen. however i dont have any stills in my timeline and it happens to every project that i open. once i alter a clip whether it be a transition, effect or change in speed and then render it all i get is a green screen. i am pretty sure i have some kind of spyware virus on my computer but would this be able to affect premiere pro cs3 like this? i have tried all the tips given to people that have the problem with stills such as changing the opacity and increasing my computers virtual memory but none of this seems to be helping me. i really hope someone has a solution as i have about a years worth of footage stockpiled that i was just about to start editing but cannot do so. thanks alot.
Xander Beccari

First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link

Black and green screen after water

Well I did this huge accident by dropping my iPhone 5 into the toilet, but it was only in there for 2sec. I dried the phone and it was still working, but after a while it turned itself off. As a reaction, I hurried starting it again to check if it still was working and it was. But after that, my friend told me to turn the phone off again as soon as possible.
When I got home, I placed the iphone in a bag of rice without any air in it, and waited over 24 hours to check it.
When I checked it(which I think I did too early)- it worked, and I was so happy! Everything, the sound was just fine, but after a while it didn't respond to my touches and suddenly the screen became black and green pixle-ish and grumsy, but I could still see something in the background.
I placed it back into the rice, but this time on my bathroom floor in a bag, because it's warmer there.
I don't dare take it out before I know that most of the water is gone, but at the same time I don't know what the problem with the screen was. Is it possible to fix it? I think I maybe can get some help from a friend, but it would be nice if anyone knew what i could do, or what the problem is.
I also read about people who got problem with black and green screen on their iPads. Everyone who read the thread had hit their iPads on the backside of the iPad and it got normal screen again.

Thanks, I will try that after a couple of days. I want to make sure that my iPhone is completely dry inside.
Anyone who knows how long it may take for an iPhone to dry inside after 2-3sec in water? Its in a bag of rice.

ATI TvPortal Green Screen After Update to Snow Leopard

Hi,
Is there any solution to this problem. I left messages at Diamond Multimedia and ATI and both
blame Apple for this problem.
Since the OS update my TV card is a plastic brick.
I would appreciate if you give me an answer to this problem.

Same thing here. I already had OS X 10.6.2 and when I installed the original drivers for the TV tuner fm the CD that was included, I had good audio and marginal video. I ran the auto-update on the software and downloaded/installed the latest version of the ATI drivers. That resulted in the same problem everyone else has listed: green screen and audio on all channels. I too tried to back out the update and reinstall the original drivers and now have crappy video and no audio. Tried calling ATI and their help line refers you to a former component supplier who informed me they have no visibility on the Mac drivers for the new ATI tv tuners, and suggested I contact Apple.
It would be ideal if someone could come up with the fix on this issue.

Green screen after-the-fact

I shot my subject without Vlog It -- with a camera and an empty (but lit) green screen behind him. Now I want to use the recording in place of a live person and run Vlog It. Is there a way to key in a background, add some supers, add the in/out graphics and music, etc. -- like a regular Vlog It session, but with the person on tape? Thanks, Jake

I shot my subject without Vlog It -- with a camera and an empty (but lit) green screen behind him. Now I want to use the recording in place of a live person and run Vlog It. Is there a way to key in a background, add some supers, add the in/out graphics and music, etc. -- like a regular Vlog It session, but with the person on tape? Thanks, Jake

Can I use a green screen to edit my movie on my iPad 2

I am working an a project and i need a background but all i have is a green screen.

Welcome to the Apple Community.
Peer-to-peer AirPlay
With peer-to-peer AirPlay, your iOS device and Apple TV don't need to be on the same Wi-Fi network. If you have one of these products, you can use peer-to-peer AirPlay:
* iPhone 5 or later, iPad (3rd generation or later), iPad mini, or iPod touch (5th generation) using iOS 8 or later.
* Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later. Find out which Apple TV model you have.
To use peer-to-peer AirPlay, your iOS device needs to have both Wi-Fi and Bluetooth turned on.

Iphone 5c green screen after a drop

My green (very ironic) iphone 5c's screen turned green a week after dropping it (screen was cracked)
I can now no longer use the device and I am unsure on what to do now

Visit an Apple Retail store & pay the out of warranty fee for a replacement device. Or, call apple care and arrange for an out of warranty replacement. The fee should be around $269.00 + taxes for a replacement device.
HTH

My samsung stratosphere has a green screen after I dropped it HELP?

I dropped m y phone the other day and now the screen is green what should I do?

Reboot it, if that doesn't work, you will need a new phone.

Video clips freeze and green screen after updating Toshiba PC health

I recently responded to a message from my PC Health monitor utility to download and update software. After doing this I can no longer watch video clips on line (e.g. youtube clips freeze and picture goes green and internet freezes becomes unresponsive requiring shut down restart.
I have tried downloading intel graphics drivers but get a message that says this app can't be run on the PC, seek info from manufacturer?
Can you help please?

Thanks for getting back to me and apologies - of course I should have provided better detail in my original post. I am not sure on the detail of the driver I updated but I THINK it was the Reltek one?
Laptop model is Satellite C850 and part number is PSC8WA-05D001 I have tried to download the graphics and audio drivers from your site. When I do though, download goes really well until the last 2 % and then it freezes?
I got it to complete by pausing the download and restarting it but then when I go to run it two things happen. 1. I get a Windows message saying something to the effect that it is not a recognized app an d a read more link. Clicking on the read more link gives me a chance to choose "run anyway" but then I either get "this app can't run on your PC, check with software publisher".
Other driver apps seem to get ready to run with a program window headed TSS_Setup.exe but an error message then appears in red "error occurred in reading archive. [121]

AE - Video Copyright [ Green Screen ]

When I am importing video footage in After Effect it goes green, I'm curious why it happens?
My friend said that it's because of Video Copyright. They are rendering this video so that no one can edit it
Can I set copyright to my video like this?

Thats not the case.
I have created my own material and want to protect it. I am asking that if somebody else created such protection on their video (I mean it is visible only as green screen while editing and I think its not only the problem of having a proper codecs) how has they done it? Can I do it? how?
I hope I have stated my question correctly and everything is clear. again , i repeat that I know that some of those videos needs proper codecs but some of them (even when u have a codecs) still appear as only green image and I think its a meter of copyright.
Thanks

Green Screen AFTER Edit?

Similar Messages

Maybe you are looking for