Green screen after-the-fact

I shot my subject without Vlog It -- with a camera and an empty (but lit) green screen behind him. Now I want to use the recording in place of a live person and run Vlog It. Is there a way to key in a background, add some supers, add the in/out graphics and music, etc. -- like a regular Vlog It session, but with the person on tape? Thanks, Jake

Similar Messages

Can I change the background for the green screen after my project is completed?

Hello,
My daughter just made a full project in imovie then tried to add the green screen background and found that she has to redo the whole project. Is there anyway for her to add this after the fact?
Thank you,
Heather

If these are purchase movies and not rentals, from iTunes, on your computer, you can select the movie in iTunes, use the key combination command-I to get the info on the movie. A info window pops up. Click the Options tab, a volume slider appears at the top of the window, slide the slider all the way to the the right, click the OK button at the bottom of the window. Then reconnect and sync your iPad, again, to the computer and wait for the movie to update to your iPad, then once everything is complete, eject the iPad from the left hand pane and disconnect. When you play the movie, again, from the iPad, the volume should be louder.
I do not believe you can do this with rented iTunes movies, though as I do not think they are editable as a rental.

My Macbook will not boot the operating system. It just goes to a blue screen after the apple logo and the spinning wheel goes off. I took the battery out and held the on/off button for five seconds and reset the PRAM. I have the old mac os disk.

My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
Rich

You won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

When I import a CD album that includes songs with co-artists, the album is saved once with all of the songs with the main artist only, and then one album for each song with a different co-artist. How can I avoid that or fix that result after the fact.

When I import a CD ablum that includes songs with co-artists, the album is saved once under the album name with all the songs from the main artist; then each song with a different co-artist is saved separately under the album title with just that song. Who do I prevent that or fix it after the fact, i.e., copy the single songs to the main album?

Why aren't songs with the same album art grouped together? - http://support.apple.com/kb/ts1468
Compilation checkbox is under options tab when editing multiple tracks at once.
https://discussions.apple.com/thread/4559720 - discussion of using compilation vs. album artist to group tracks
Jan 2014 discussion: https://discussions.apple.com/thread/5775641

I got rid of my PC and the hard drive was destroyed. This was done before I deauthorized my computer from ITunes. Is there anyway i can do this now, after the fact. I can't access certain songs in my library now

Help! I got rid of my old PC and the hard drive was destroyed. I forgot to deauthorize it in Itunes and now I can't access a lot of the songs in my library because it says too many computers have been authorized to play the music. IS there anywy I can deauthorize now, after the fact??

Deauthorize all computers
To deauthorize all your computers, follow these steps:
Click to open your account in iTunes (you may need to sign in with your Apple ID), or follow these steps:
Open iTunes and click iTunes Store.
Click Sign In and enter your Apple ID.
Click your Apple ID and select Account.
Click Deauthorize All.
NOTE: Apple limits the Deauthorize All option to once every 12 months.

Changing the document page size after the fact.

Does anyone know of a way to change the page size globally after the fact?
I have sent a 200 page book created with Pages '08 to my printer. The work has a full bleed watermark in the background on a custom 7" X 11" document. I've just been informed that he needs to increase the paper size to 7.25 X 11.25 and have me increase the watermark so it can be trimmed down.
Is there a way to change all 200 pages or do I need to set-up a new document and do a whole lot of cut and paste?
Thanks in advance everyone.

Your problem is that the change is not proportional.
However it is not a great change, 6.66% at most. If you don't mind a subtle change in height vs width, just create a pdf of the entire document and tell the printer to change the size on going to plate.
Alternatively you can simply scale it up the 6.66% which will make the height about 0.5" too high and trim away the excess.
The other way is only scale it up 2.27% which gives you the right height but leaves you with 0.1" less width.
Or you can go in between and have a compromise for both directions by scaling up 4.4%.
It depends if you have white margins in either direction that can take up the slack and also how much bleed you have on the watermark. You only need 1/8" to cover any trimming errors.
As this appears to be quite a long book and would need to be imposed up in signatures, I would imagine the printer must have the necessary imposition software to allow for creep etc, which should also allow for non-symmetrical scaling.
Don't you Americans ever feel at moments like these that you wish you weren't the last people in the world to not use metrics and rational paper sizes?

AT&T Charging Deposit 5 months after the fact.

Anyone else experiencing this issue?
I purchasd a iPhone at Launch at a AT&T Retail Store. I had them run my credit and was told No Deposit was required and got a Pre-Approval Check Number. So bought the iPhone went home and activated it. When hooked into iTunes and went through the Application Process I input the Pre-Approval Check Number and no point did it tell me a Deposit would be required... Now 5 Months after the fact AT&T added $750 my Bill and only 2 days to pay it. And they are refusing to fix the problem...
Is this even legal?

Why do you think you would lose the deposit by switching from a post paid plan to a Pay-As-You-Go?
A deposit is required for those with poor credit and payment history or with no credit which is usually refunded after 12 months of good payment history. If one cancels their contract, the deposit is not lost - it is held until the final bill is paid or the final bill is paid for out of the deposit with the balance refunded.
Since you received a credit pre-approval before activating your iPhone with no indication a deposit was required - had you failed the credit check during the activation with a deposit required at that time, you would have had the option to go with the Pay-As-You-Go plan instead of paying the deposit - an option many have used that prefer not paying a huge deposit in order to have a post paid plan.
Since AT&T made a mistake with your credit check and is now requiring a deposit, I was just providing you another option that AT&T would probably allow you to do instead of paying the deposit without charging you the $175 ETF.
Pay the $700 deposit then.
Message was edited by: Allan Sampson

Displaying Screen After the Add Button is pressed and the document is saved

Hi All,
I am trying to the Display the Landed Cost screen after the Goods Receipt PO has been added and Saved.
My code below: <b>If pVal.ItemUID = "1" And pVal.FormTypeEx = "143" And pVal.FormMode = SAPbouiCOM.BoFormMode.fm_ADD_MODE And pVal.BeforeAction = False Then
            If pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
                Dim oMenuItem As SAPbouiCOM.MenuItem
                oMenuItem = SBO_Application.Menus.Item("2310") 'modules 2310 is the Landed cost screen'
                oMenuItem.Activate()
            End If
        End If</b>
It displays the landed cost screen when i Click the add button, But I need to display it after the the document has saved, ANy inputs on the same!
Your help is appreciated!!!

Hi Vinayak,
Change the code
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
to
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
And it will work.
Best Regards,
Nick He

HT4623 When I download an app it doesn't request access to photos and am unable to do it after the fact as the app isn't on privacy to allow me to do it

WHen I download an app it isn't able to access my pics and I can't do it after the fact either as it isn't in privacy to add

Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

Changing Layouts After-the-fact

Hi All-
I am rebuilding my company's website on our server where
previously it was outsourced, designed and hosted by another
company. I feel that this is a huge undertaking ... and my boss
thinks it should be easy. He wants me to look at the site that is
online now and transfer the images, info, etc over to Dreamweaver.
Anyone have any advice?
Anyway, my question is this:
When I started building the homepage I used the the
"twoColLiqHdr" page layout (where the sidebar is on the left and
the paragraph content is on the right). I want to change this so
that the sidebar is actually on the right and the content on the
left of the page. Can I change this since it is after the fact? If
so, how?
Thanks.

This is a multi-part message in MIME format.
------=_NextPart_000_0024_01C97FAA.A1ADCE60
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
If you used a Dreamweaver template, you can modify the
template and =
update the child pages instantly. If you didn't, I would
recommend you =
create a Dreamweaver template with the styles you wish and
use Apply =
Template to page to update the child pages. You will probably
have to =
adjust some of the content accordingly.
--=20
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web =
Development
"lorentza" <[email protected]> wrote in
message =
news:[email protected]...
> Hi All-
>=20
> I am rebuilding my company's website on our server where
previously it =
was=20
> outsourced, designed and hosted by another company. I
feel that this =
is a huge=20
> undertaking ... and my boss thinks it should be easy. He
wants me to =
look at=20
> the site that is online now and transfer the images,
info, etc over to =
> Dreamweaver. Anyone have any advice?
>=20
> Anyway, my question is this:
>=20
> When I started building the homepage I used the the
"twoColLiqHdr" =
page layout=20
> (where the sidebar is on the left and the paragraph
content is on the =
right). I=20
> want to change this so that the sidebar is actually on
the right and =
the=20
> content on the left of the page. Can I change this since
it is after =
the fact?=20
> If so, how?
>=20
> Thanks.
>
------=_NextPart_000_0024_01C97FAA.A1ADCE60
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.6000.16788"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT
size=3D2></FONT> </DIV>
<DIV>If you used a Dreamweaver template, you
can modify the =
template and=20
update the child pages instantly. If you didn't, I
would recommend =
you=20
create a Dreamweaver template with the styles you wish and
use Apply =
Template to=20
page to update the child pages. You will probably
have to adjust =
some of=20
the content accordingly.</DIV>
<DIV> </DIV>
<DIV><FONT size=3D2><BR>-- <BR>Nancy
Gill<BR>Adobe Community=20
Expert<BR>Author: Dreamweaver 8 e-book for
the DMX=20
Zone<BR>Co-Author: Dreamweaver MX: Instant
Troubleshooter (August, =
2003)<BR>Technical Editor: Dreamweaver CS3:
The Missing=20
Manual,<BR> DMX 2004: The Complete
Reference, DMX 2004: A =
Beginner's=20
Guide<BR> Mastering Macromedia
Contribute<BR>Technical Reviewer: =
Dynamic=20
Dreamweaver MX/DMX: Advanced PHP Web
Development<BR></FONT></DIV>
<DIV> </DIV>
<DIV><FONT
size=3D2></FONT> </DIV>
<DIV>"lorentza" <<A=20
href=3D"mailto:[email protected]">[email protected]=
</A>>=20
wrote in message <A=20
href=3D"news:[email protected]">news:gll2p1$p4c$1@forums=
.macromedia.com</A>...</DIV>>=20
Hi All-<BR>> <BR>> I am
rebuilding my company's website on =
our server=20
where previously it was <BR>> outsourced,
designed and hosted by =
another=20
company. I feel that this is a huge <BR>>
undertaking ... and my boss =
thinks=20
it should be easy. He wants me to look at <BR>>
the site that is =
online now=20
and transfer the images, info, etc over to <BR>>
Dreamweaver. Anyone =
have any=20
advice?<BR>> <BR>> Anyway,
my question is this:<BR>>=20
<BR>> When I started building the
homepage I used the the =
"twoColLiqHdr"=20
page layout <BR>> (where the sidebar is on the
left and the paragraph =
content=20
is on the right). I <BR>> want to change this so
that the sidebar is =
actually=20
on the right and the <BR>> content on the left
of the page. Can I =
change this=20
since it is after the fact? <BR>> If so,
how?<BR>>=20
<BR>> Thanks.<BR>>
</BODY></HTML>
------=_NextPart_000_0024_01C97FAA.A1ADCE60--

CF9 - install Solr after-the-fact

We have a Windows 2003 server with Multiserver configuration of ColdFusion 9 (and subsequent 9.0.1 updater) installed. Unfortunately, we installed CF without selecting the Solr Search Server install option, and now are finding a need for it. What are our options for getting the Solr Search Server installed on the same server?
Searching through Google, I found some options but not sure which is best:
Solr Standalone Installer - seems to be for installing on a separate server, which we do not want to do. Unclear if this would be safe to install on same server as CF 9, and also would not give ability for any updates to be automatically updated.
Do a complete reinstall of CF 9 again on the server, but that would require extra effort and retesting of applications.
Install via CF 9 installation disk. One blog I found suggested to go through the installation process again, selecting to install with ear/war as multiserver, then would be able to select option to install Solr. We tried this on a test server, but were getting Solr errors (NullPointerException) when trying to create a new Solr collection.
Any advice would be greatly appreciated. I only wish Adobe had better documentation on this, as I would think it could happen more frequently.
Thanks!
Tiana

Very interesting question, Tiana. But to be honest, no, it doesn’t come up that often, at least that I’ve noticed (and I’m pretty active on these and other CF troubleshooting forums and lists).
As for solutions, I suspect you’ll find the first option below works well. As far as I know, there’s no problem at all running it on the same machine as CF. And I’d not worry as much about “updates”. It’s not often that updates seem to relate to the Solr engine (though I’ve not studied that really closely.)
But you’re right: it really ought to be easier to enable Solr after the fact (whether for the Standard/Server or Multiserver form of deployment). I too am surprised that it’s not come up before. I’ve just done a fair bit of googling hoping to find someone having discussed it, to no avail.
It would be a cool thing for someone to research/blog about. It may be fairly simple, just as enabling CF’s built-in web server or RDS features can be enabled after the fact, if you know what XML files to tweak. But then the Solr feature in CF runs as a service, so that has to be installed (I suspect that installer will do that), and then there are CF Admin configuration settings that need to be tweaked. I don’t use Solr enough myself to be excited to pursue this myself.
But do consider asking Ray Camden and/or Ben Nadel, who both offer a means on their blogs to answer specific questions. I think they’d be interested in this one, in particular, since it would be a great contribution to the community to document if there’s any solution. Ray can be reached via http://www.raymondcamden.com/contact.cfm, and Ben at http://www.bennadel.com/ask-ben/ask-ben-nadel.htm.
If you find an answer some day, please do share it here. Hope that helps.
/charlie

When keying a green screen shot, the image being keyed goes a little out of focus when the effect is applied. How do you keep it sharp?

When keying a green screen shot, the primary image goes slightly out of focus when the effect is placed. What am I doing wrong??

Make a letterbox in Photoshop -two black stripes and a hole in the middle, place it on a higher video track.
Or download this: http://web.mac.com/andymees/Freeand_Easy/main/Entries/2008/1/23_Andy’s_Letterbox2.html

HT4623 Hi, I am suck on the Terms and Conditions screen after the upgrade and have agreed, but I am not progressing further from this sceen after agreeing? What do I need to do?

Hi, I am suck on the Terms and Conditions screen after the upgrade and have agreed, but I am not progressing further from this sceen after agreeing? What do I need to do?

Have you tried resetting (Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears) and starting the set up again?

Green Screen AFTER Edit?

I am using iMovie '09 to edit an interview with a green screen. The interview is already cut up and mixed in with still pictures. Is there any way I can still ustilize the green screen tool without having to re-edit since the proper order is to lay down your background first? Thanks in advance for your help.

There are some tools to transfer fcp7 projects to fcpX. Go the app store and do a search for 7toX. I haven't spent much time with fcpX. I did purchase 7toX but didn't have much luck transferring a project successfully. Might have been user error, might not, so I'd seriously suggest that you test your workflow before actually trying to use any workflow.

My QT 7 (which I paid for) shows a green screen when the video is stopped.

I used to be able to scrub through a video to find and isolate frames. Now I only see a green screen unless the video is playing. Anyone know why this is happening? Thanks,

I used to be able to scrub through a video to find and isolate frames. Now I only see a green screen unless the video is playing. Anyone know why this is happening?
Are you using a MacBook Pro model with dual display cards? (I.e., check your profiller.) If so, Snow Leopard and Lion users have indicated that switching from "Battery Saver" to "Performace" mode in the System Preferences "Energy Saver" window fixed this problem. Not sure if this also works for Leopard systems but it might be worth looking at.

Green screen after-the-fact

Similar Messages

Maybe you are looking for