Green shadows when scrolling text after calibration

Hello, I'm having strange screen behavior after calibrating it (I'm using Spyder 3 hardware with both its own software and ColorEyes DisplayPro).
What happens is that when the screen is correctly calibrated I get annoying green shadows when I'm scrolling text. This actually happens whenever there's a "moving-high contrast" situation (for example, if i'm opening a folder and screen pixels change luminance quickly) and of course in a multitude of different applications.
I also uploaded a video to youtube to show the situation.
https://www.youtube.com/watch?v=oaNF4i0djFM&feature=youtu.be
As you may notice, when I choose the standard color profile (uncalibrated) the behavior disappears (0:32 in the video). When I revert to the calibrated profile it comes back.
I think something might be wrong with my screen (which, by the way, is out of its applecare warranty since two weeks ago...).

Does this still happen if you run Firefox in Safe Mode?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

Audio drops out when scrolling playlists after upgrading new version of 9.2

Hi Folks,
Has anyone noticed an issue when scrolling the playlists in Itunes now that the audio drops out for a second.
I use an external USB audio device by Native Instruments called the Audio Kontrol 1.
I have watched the processes on my PC and when I scroll up and down on the playlist. Something spikes causing audio to not play for a second.
I am hoping to fix this somehow as I do not want to roll back (not even sure if you can). I also have heard with dual core processors that occasionally audio can get stopped as other processes take over where in single core processors everything cued up (any truth to that).
Any help at all would be greatly appreciated.

Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
Thanks again,
jesterhead

Yellow/Green Cast in Photoshop CS6 After Calibrating Retina Display

I am using a MacBook Pro with Retina display, and Color Eyes Display Pro with the Color Eyes to calibrate my screen. It is working perfectly, except, that when I open Photoshop (or even the Adobe updater now), the whole screen goes bright Green / Yellow! See the photo attached, it's quite nuts and give you a headache after a few seconds of looking at it. I have tried turning of the GPU processing thinking it would be conflicting with that, and a dozen other small attempts to get rid of it, and nothing! I finally am back at the default calibraiton for the Retina display, and it's not that bad, but still obviously not calibrated. I can't for the life of me find anyone else who has this issue, am I crazy?
Thanks!

Okay, so, I really only posted that because I figured maybe in the future someone else would run into the same problem. I found the solution! Color Eyes Display Pro spits out the ICC profile as a version 4 and LAB based 16 bit file. Turns out that isn't compatible somehow (would love and Adobe tech to answer why for me, is it GPU or something else bugging out here?). Thankfully, there is an option in Color Eyes Display Pro to change it. I changed it to "Matrix Based" instead, and voila! Here's a screenshot of where that option is, just click on "Profile Setting" and change the second drop-down to Matrix Based. ICC v2 didn't work for me either, whole program crashed.

Re-occuring shut off when scrolling even after firmware upgr

Hello all,
I have a Muvo Tx FM and have had it since May. In June, it started shutting off when I used to scroll bar. I came to the forum and the suggestion was to reinstall the firmware. So I dl'ed it from this site and reinstalled it. The player worked fine and I was estatic.
Fast-forward to August and its doing it again.
Does anyone know why this happens?
Is there a more permanent solution to the issue?
How long is the warranty on these players (typically)?
I will try to upgrade the Firmware, but somehow I doubt this is going to help.
-Thanks,
TG.

Some people have linked it with happening when removing the player from the PC, without ensuring it's "safely removed".
Failing that, can you pinpoint any event that causes it to happen?
Warranty varies depending where you bought it. It's 3 months in the USA (I'm not sure if the MuVo is covered with a further 9 months parts only warranty, I know some of the Zen players are). In Europe the warranty is at least year.

HT201109 Final Cut Pro 10.1 crashes with Motion 5.1 custom Scrolling text and Graphics titles

Dec 29, 2013 1:33 PM
found out why Final Cut 10.1 won't load my custom titles without crashing. When scrolling text in Motion 5.1 if you ad a graphic to scroll with the text Final Cut 10.1 will crash. If I remove the graphic in Motion and then load it into Final Cut 10.1 it will work.
So Graphics and scrolling do not work. The graphics are .jpg, .png, .tiff, .psd. I don't know how to fix it. Hopefully someone out there does.
Dave
Final Cut Pro X, OS X Mavericks (10.9.1), 2.8 GHz Intel Core i7 & 16 GB Ram
Final Cut Pro Quit Unexpectedly
Process:         Final Cut Pro [4123]
Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCut
Version:         10.1 (238755)
Build Info:      ProEditor-23875005025000000~5
App Item ID:     424389933
App External ID: 223682791
Code Type:       X86-64 (Native)
Parent Process: launchd [175]
Responsible:     Final Cut Pro [4123]
User ID:         501
Date/Time:       2013-12-28 12:37:04.233 -0500
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: E080EF73-4EC7-F729-7343-2C37817936C6

Thanks Tom for the advice. I have four external hard disks, all of them formatted with Mac OS Extended Journaled. On all devices (2TB) I have more than half free space. They are connected either with Thunderbolt or USB3 cables. Different manufactures: LaCie, Toshiba, WD and Samsung. I face the same crash problem if I connect a UBS drive 16GB or a any other device to the USB ports including the Sony Video camera connected with a USB1 cable. Same problem on ALL my computers! To work properly, I have to disconnect all USB devices and work only with internal hard disks. I also tried to format the MacbookPro (erasing the partitions with a new installation) but I have the same problem. I really lost hope...

How can I use a table as source for scrolling text

Hi,
I have a javascript scolling news on our portal page and anytime I need to update the news I have to update the portlet. Is there a way to use a database table to store the news and get it displayed automatically (as a scrolling text) after committing the transaction.
Thanks,
Leonard

What do you mean by updating the portlet - page refresh?
The nature of HTTP is that the client has to initiate the communication. As long as the browser doesn't submit a new request for the page, the content won't refresh.
There are tricks, though that you may consider... such as placing an iframe on your portal page that "pings" the server and checks whether there's any change on the server side. Another option could be using an applet.

Cursor is erasing/distorting text/everything when scrolling

I just installed 2 1tb HD's in my G5 tower. No biggie.
I installed Leopard in one and and migrated from the old HD.
I am having issues with my cursor.
Whenever i scroll it distorts, erases, moves text, images whatever it comes across.
Tried the mighty mouse and a wireless. same thing.
Tried repairing disk permissions and repairing disk. No problems found.
Any ideas???

Same text distortion problem! After I just installed Leopard. I had the same thing happen on Tiger which was installed on two separate drives! One was fine and the other one did this same "text distort and replicate" problem and would leave white boxes (when scrolling down through screened backgrounds). Now I have installed Leopard on a clean formatted drive and its back! If I click and drag over it-it re-renders the text back to normal. Both versions of Tiger are updated the same to 10.4.11
I have read discussions of MacBookPro owners who thought it was a problem specific only to there laptops but it is clearly wider spread than that. It is a minor but extremely annoying glitch to work with.........I hope somebody figures it out!

My iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in all it does is vibrate. Anyone having this issue??

My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??

I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue

HT3529 why is it that when sending texts, sometimes it shows in blue and other times in green ? What does that mean?

Why is it that when sending text messages, sometimes they go through in blue and sometimes in green? What does that mean ?
My second question is, at times after sending a text it says: Sent as a text message.....I'm thinking, really? that's what I thought I sent in the first place !
Some one please help me out.......

Hi JoFan0465,
Welcome to the Support Communities!
Good question!
Blue messages are iMessage conversations (Apple's messaging service)
Green messages are SMS - standard text messages.
SMS is the acronym for Short Message Service.
MMS is the acronym for Multimedia Message Service (audio, pictures, video can be added to messages).
With MMS turned on, you will see a little camera icon in the bottom left corner of your screen when you are in the Messages app. Also you will see the word iMessage where you type your text.
The link below will explain more:
Apple - iOS 6 - Messages with iMessage, for unlimited texting.
See the iPhone User Guide - pgs. 64-66 to learn more about Messages:
manuals.info.apple.com/en_US/iphone_user_guide.pdf
The article that you referenced, iOS: Using Messages explains all of the parameters and requirements for sending messages on your iPhone.
I hope this information helps ....
Have a great day!
- Judy
<Edited By Host>

Is this a known problem - Panel text and combo boxes not repainting completely when scrolling in IE?

Looking for any insight as to what might be going on. Would appreciate any info if anyone knows about this or similar problems..
I have a panel with 18 children - text and combo boxes - that does not repaing correctly in IE when scrolling vertically. The 18 children do not fit in the panel, so a vertical scroll bar appears. The scroll works perfectly when i run through FireFox. But it does not work in IE in this case. The child controls appear as painted over parts of other controls.
thx.

Wow ... wow... Magic. Your last suggestion of removing the wmode attribute worked. The page looks great. The scroll works flawlessly where before it mangled the child controls on the page making it look like a hurricane scene.
The html was originally set with wmode as "opaque". I tried changing it to "transparent" after your first response, but this made no difference. What fixed the problem was removing the wmode attribute altogether.
We've built a rather large application. Is there anything we need to be aware of, or anything we need to look out for by removing the wmode setting?
Thanks much.

Scrolling text is jumpy/pulsing when compressed

I'm making end credits using the scroll up text animation behavior in Motion 2.1.2. Whenever I compress it for DVD Studio Pro and insert it the text looks terrible. It is pulsing in and out and is hardly readable. I found a few other people who have had this problem, but no solutions that have helped.
I have done credits using the scrolling text in Final Cut without much problem, but for this project I need motion in order to use text of different sizes.
Here are my specs:
Project Properties - NTSC DV; 720x480; Pixel Aspect Ratio: NTSC D1/DV - 0.90; Field Order: Lower First (Even); Frame Rate: 29.97; Background color is black (0%)
Render Settings - Motion Blur Samples: 8; Shutter Angle: 360; Output Antialiasing Method: Best
I used Export using Compressor: DVD Best Quality 90 minutes 4:3; I tried using the Color+Alpha and just Color in the Output options. Premultiply alpha and Use field render are both checked. Use motion blur is not checked.
Most of the text is Geneva Regular 14 pt font. I have tried completely white as well as setting the RGB sliders all at 235 with no difference. I also tried using a black outline with no difference. The scroll up behavior has a rate of 52.
Please help! It took me forever to put these credits together and I don't want to start from scratch with another program. Making the text bigger helps a little bit but I would really like to keep it the same size for timing and format sake. However, I can't keep it like this because it looks terrible both on an Apple Cinema display and on a tv after burned to DVD.
Thanks!

My first guess would be the font itself. Geneva is a pretty thin font and it's not likely to look good interlaced and on a TV. Can you try a thicker font?
I'd also turn off Field Rendering. It looked much worse with it on than off. Keep Frame Blending though.
Andy

Possible to show bottom of scrolling text first when icon is displayed?

Hi,
Does anyone know if it is possible to show the bottom of
scrolling text when the display comes up? For instance, let's say
you have 20 lines of text in a scrolling display, but it only has
room for 10. By default, Authorware shows the top 10 lines in the
scrolled display, not the bottom 10. I want to show the bottom
10--is this possible?
Thanks,
Edwin

Hi,
Well, I decided to have the most current information at the
top of the display. For instance, if it were a chat, the most
current chat info would be on top instead of on bottom. That fixed
the problem adequately.
Edwin

MacBook Display - Text Glows or Fades When Scrolling with Two Fingers

I am currently using an early 2008 MacBook Black, OS X 10.5.5, 2.4GHz Penryn, 4GB RAM (CAS 4), 250 GB HDD. I recently came into an Apple Store for a Genius Bar appointment because of a problem with the screen. When I use two finger scrolling and view text on a white background, the text appears to glow (especially blue text) or fade (black fades to an almost imperceptible gray. This behavior appears in Apple's Safari, Pages, Numbers; as well as, Safari. I have not tested beyond this yet.
The Genius at the store had no answer for this behavior and the other early 2008 MacBooks in the Apple Store (Walden Galleria, Buffalo, NY 14225) also exhibit this behavior. The Genius admitted this was annoying when viewing text and it appears to be a driver or OS problem because this behavior is also exhibited on the late 2008 MacBooks and MacBook Pros.
Suggestions?

It's a characteristic of LCD response time. There is nothing to be done about it except maybe experiment with different colors of text or backgrounds. That's not always practical, I know. Basically, we all have to live with it.

Adobe Reader 9 highlights text when scrolling in terminal server

Running a terminal server with WIndow 2003. Have Adobe 9 Reader installed. When a pdf is opened, it will look correct. However, when one uses the scroll bar on the right to see more of the document, text can be highlighted and change colors constantly when scrolling.
Test it outside of terminal server and it works fine. This issue did not happen with other versions of Reader. I have attached two samples one clean and one highlighted.
Any help is appreciated

Very cool. Thanks for the info!
Date: Fri, 16 Oct 2009 10:42:24 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Reader 9 highlights text when scrolling in terminal server
Okay. Here is what I found. These settings are changed\saved under the User settings in the registry. Here is the key the changes are made to:
HKCU\Software\Adobe\Adobe Reader\9.0\Originals
When "NONE" is selected from Adobe Reader - Edit - Preferences - Page Display - Rendering, three DWORD values are added to the above mentioned registry key. These are:
Value Name - Value Data
*bAntialiasText - 0
benableDDR - 0
iAntialiasThreshold - 12*
I have added these lines to a login script that adds the necessary DWORD values to default the "Rendering" to NONE.
*reg add "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /V bAntialiasText /T REG_DWORD /F /D 0
reg add "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /V benableDDR /T REG_DWORD /F /D 0
reg add "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /V iAntialiasThreshold /T REG_DWORD /F /D 12*
Cheers!
>

Reader XI: after opening a pdf I get black areas in the doc when scrolling down

Hello,
I have a problem with acrobat reader XI after a new installation of my hdd.
After opening a pdf, I get black areas in the pdf when I scroll down. The black area disspear when scrolling up. What can I do? Win7 Prof 64bit
Many thanks in advance
Michael

Hello Michael,
Please make sure that you are using latest version of Reader XI.
Please Go to Help-> Check for Updates...
Regards,
Anoop

Green shadows when scrolling text after calibration

Similar Messages

Maybe you are looking for