Greenish sparkling and tinge on my MacBook Pro screen?
Hey guys,
Over the past couple of weeks, I've been having a problem with the entire screen of my MacBook Pro internittently being covered with a greenish tinge. It doesn't happen all the time, and sometimes goes away depending on what I'm working on. Sometimes it'll be a few pixels of green here and there, followed by whole chunks of green over the screen, followed by a complete greening over the entire screen. It does not affect the performance of the computer at all, but it's really annoying and often won't go away unless I restart. What could be causing this? I have a 2.33 GHz Intel Core 2 Duo MacBook Pro running OSX 10.7.2. Could it be an overheated video card? Corrupted driver? Can anyone recommend any fixes?
Thanks in advance for any and all assistance!
-Brook
Hello.
I had this problem with my iMac G5.
What i did was
System Preference > Display
Under Resolutions default is set as 1440 x 900 just toggle it that is
click another number below then click the top one 1440 x 900.
Click the color tab don't do any thing there, click the display again.
Close System Preference.
Hope it works.
Similar Messages
-
Gray and white smudges in MacBook Pro Screen
About 1 week ago, I noticed 2 faint grey smudges in the middle of my MacBook Pro screen. I dismissed it at the time because I could barely see them unless I looked extremely close on a dark screen. I opened my computer up yesterday to see that the amount of spots had tripled from 2 to 6, are becoming more apparent, and all in the same area in the middle of the screen. They are still only able to be seen on a dark screen. The smudges are about the size of the cursor Also, when I tilt my head or tilt my laptop screen far back on a white screen, I can see that those spots turn slightly brighter white than the rest of the screen. While the grey smudges aren't connected, these white areas appear to connect to make a circle.
Another quick note, in December, I had a similar problem with my screen. The white spots were in the same circular shape and clear on any background, however, instead of grey smudges, I had spots that were black in the exact same circular shape. Apple labeled it as pixel anomalies and replaced my screen for me with no problems. Do you think it is pixel anomalies or something different? I bought the laptop in September 2011 and it is under everyTake it in for repairs while you are still under warranty.
-
I have video taken on a flip camera and transferred to my MacBook Pro. the files are in AVI format when I click on them to view they turn to jpg. I can not view them.
Get this:
http://www.videolan.org/vlc/download-macosx.html -
I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.
iOS is only for mobile devices, so:
Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
For Mavericks users:
http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-4101 -
I purchased Pages, Numbers and Keynote for my MacBook Pro and iPad last year. I just purchased a new iMac for my wife and it came with iWorks. When I try to save a document on the iMac it tells me I must buy an iWorks serial number, but the App Store shows the applications as installed and will not process the request. How do I correct?
Did you pay for iWorks to come preinstalled on the iMac? Because it sounds like what you have is a trial version, which is why it is stating that you need to buy a serial number.
I suggest that you delete the entire trial iWorks suite. Once they are safely in the Trash where the Mac App Store can't see them, you can sign into your account on the MAS and download the MAS versions that you own a license to use. -
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?
It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.
-
My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?
There's info here on setting up separate libraries and user accounts. You won't have to reload (or re-import) all the music, just copy it.
The reason I suggest separate accounts on the Mac is because if you have the two libraries under the same user account, iTunes will also open the last library that was open in that account, and you'll always have to be mindful of which library that is. If you open iTunes and find it's not your library, you'll have quit, relaunch holding the option key and select the other library.
No, you won't have to log in and out of the Mac. (If I'm understanding your question here.) Multiple accounts can be logged in at the same time. And with fast user switching, you can toggle between user accounts.
I'll admit that maintaining the two libraries gets a little tricky, because if you share all the same music, you'll have to add it to one and update the other. (That won't happen automatically.) But I think Home Sharing makes this much easier to do.
Hope that helps! -
I did a force close on Safari and after rebooting my macbook pro, i no longer see the Safari icon on the dock. How do i get i back?
If you can't get dragging to work, just click on Safari from your Applications folder, and it should appear in the dock. Then you can right-click on the icon and PIN it permanently there.
-
I was listening to a YouTube video on the history of X15 rocket airplanes. All of sudden, out of the blue a translucent back message drops top down, stops the video, locks up my MacBook Pro screen and demands that I restart my lapTop by first holding down my power switch, then turn the lapTop back on. This has never happened to me before. The message was in black & white, and in about 6 languages: English, French, Spanish, Dutch, Japanese, Chinese. Does any one recognize what this might be?
The Computer turned back on just fine as if nothing had Now I am freeking out that they could be reading my key strokes or something. Could they have used this tactic to install malicious software on my computer by first taking away my ability to do anything about it being that I am not a software engineer? Can any one think of anything simillar? I reported this as a bug to APPLE the regular way, then cleared my Safari cookies, then run software update which returned nothing new as in " your software is up to date at this time."
Can any one please help?
A-NmN.Hi stedman1,
Thank you so much. This seems to make sense to me now. I was freaking out a bit that some hacker could be messing with my MacBook Pro. I will be monitoring this issue from now on as it has never happened before.
A-NmN. -
10.6, quicktime, and itunes on a macbook pro 2.53 w/ 4gb ram and ssd
Hi,
I am experiencing something extremely weird, and extremely frustrating...
What I am experiencing is that after I've been using my system for a while, I will launch quicktime, and I will get the spinning ball forever.. If I launch iTunes it will just bounce on my dock forever and not launch.
Then I have to reboot, which is sometimes impossible to do, so I will have to manually tell my system to shutdown via the terminal.
When my mac reboots, everything is fine.. Quicktime launches, iTunes launches, happy world...
... So I thought it was perhaps something that I was doing (applications that I was running, websites I was visiting etc.), but now I have evidence that it's not. Which is even more confusing. Last night, a friend wanted me to pull up something on quicktime-- I got the spinning ball.. Said "ugh, I don't understand what is up with my system". Clicked restart.. It wouldn't restart.. lauched terminal.. sudo shutdown -h now... Ok.. it's off.. turn it on.. Launch quicktime.. hooray.. there's the video..
Ok-- That was the extent of me using my computer. I left it on after that for many hours.. and eventually closed the laptop.
In the morning, opened it up.. Clicked quicktime, and.. SPINNING BALL. Had to reboot.
so, the only thing I can think is that something is occurring inactivity, or sleep, something that is causing QT and iTunes to mess up... I tried doing various tests, but could not come up with anything. I tried just running my screensaver for a while, but quicktime still comes up no problem.
Very frustrating.. I want to know if anyone else is experiencing this, and if there are any suggestions for what I should do. I have zapped p-ram, I have repaired permissions...
-patrickWelcome to Apple Support Communities
1. That's a risk, and more in a MacBook Pro, that has got everything soldered except the hard drive and memory.
2. If you want performance, buy a SSD. It will get the best performance but they are expensive, so you should consider the option to buy a SSD with a small capacity to store OS X and applications and an external disk for other data.
3. SSDs are much better than hard disk drives because they haven't got mechanical parts. You will notice this difference in read and write tasks like a startup, that will be much faster. However, in other tasks, it doesn't mind if you have a HDD or a SSD, because performance depends on the processor and graphic card. Also, you will notice a difference with a 7200 rpm hard disk.
4. You can take it to an Apple Store or reseller to see what they can do in order to repair your computer -
How do I cut and past on my macbook pro?
How do I cut and past on my MACBOOK PRO?
You can use the hotkeys, as Steve said. It sort of sounds as if you can't right click though.
If you're using the touchpad, go into system preferences>trackpad, enable "secondary click, tap with 2 fingers". Then, when you click/tap the touchpad with 2 fingers instead of one, it'll right click, giving you the option to copy/paste whatever you highlighted. -
I've updated all my software and Itunes on my Macbook Pro but when I went to open iTunes it tells me it's either corrupted or not installed correctly and to reinstall it. Is there anyway to fix it without reinstalling the whole program?
Here's a previous discussions that seems to have solved a similar issue in the past:
https://discussions.apple.com/message/12209861#12209861 -
i want arabic and engilish keyboard in MacBook Pro with retina display how can i order that ??, i want arabic and engilish keyboard in MacBook Pro with retina display how can i order that ??
If you haven't found an answer yet. I know for a fact that this can be ordered directly from Apple at no extra cost
You can either ask for this when buying a new MBP at a "physical" Apple store, or as in my case in the UK the online Apple store allows such keyboard configuration in addition to 3 other languages like Spanish, German and French -
how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?
Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance
Maybe you are looking for
-
pbm with asa5505.For 45 min-1h &later on internet is down.any solution hostname DarrkoEOOD domain-name default.domain.invalid enable password my encrypted names interface Vlan1 nameif inside security-level 50 ip address 89.x.x.65 255.255.255.192 inte
-
How Does The Playcount Sync Across iTunes and Multiple iPhones/iPods?
Okay, this is more of a lazy question, because I don't feel like investigating myself... So I have an iPhone with all of my music on it. I also have an iTouch with all of my music. Occasionally I will play music on my iPhone, but primarily it's only
-
Dyanamic Configuration at receiver file adapter determine target directory
Hi Experts, I have a requirement to determine the target directory during runtime. From the source side one particular field determine the Target directory where you need to place file ECC - PI - File adapter - this is the scenario In target side 3 d
-
Cisco UCS RAID SAS 2008M-8i Mezzanine Card Performance?
I recently purchased a UCS C220 bundle, which includes a Cisco UCS RAID SAS 2008M-8i Mezzanine Card. I'm planning on deploying this as a standalone server running XenServer 6.2 in the near future. I'm happy with the unit and testing is good, but for
-
Hello, I'd like to create a LabVIEW program that communicates to a stand alone component using I2C. I'm guessing that I will need to use bitbanging to get this accomplished. Does anyone have any examples of this? Is this even possible to do using Lab