Greetings! I have a nano touch 6th gen that suddenly died when I hooked it up to my netbook. Battery charged. Used ditrct power source. Left Charging Overnight. Sleep and on tried, nothing but black screen. I appreciate any thoughts you may have.

Sorry!! My first time here and I unloaded all (almost) all the tribulations in the question! My daughter gave me this nano touch 6th gen- I thought it was a battery, now you know what you are dealing with here, please type slow- it worked terrifically. I hooked to my netbook while my external was plugged in and the nano flashed something like don't unplug in neon letters and died. During this dramatic death scene, my entire library for I tunes was wiped out. I truly have no idea what happened or if it can even be fixed! Any thoughts or suggestions would be muchly appreciated ( I am afraid to call my daughter- I still struggle with my cell phone and this may send her off the edge!)

Thank you so much for your advice, and please excuse the tardiness of my response. I tried three times but it still won't turn on. But it was terrific of you to help.. at least now I have tried all things that should have worked. I don't have the serial # from the original box..but I noticed tiny little writing under the clip. Sadly I tried to take a picture of it to blow up so i could read it. I do not think I have to tell you the outcome of that one. Then I took a mirror thinking that if I could magnify I could read. Nope.And the ultimate act of lunacy that truly gives creedance to my moniker dizzard- I tried taking a picture of the magnified mirror image. During this entire process it did not occur to me to see if the clip came off. Since you have been so kind, may I impose upon you to ask how to remove the clip?
Ever so grateful!

Similar Messages

  • I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless

    I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - Try when connected to another network
    - Update via iTunes on a computer.

  • I have an iPod touch 4th gen that says it is up to date with iOS 6.1.6 can't I update it any further?

    I have an iPod touch 4th gen that says that it is up to date with iOS 6.1.6. Is it possible to update to further or is it too old? I would like to get it up to iOS7. My games run slow and some of the newer games won't download on this version.

    As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs5, the battery have charge 20 minutes. Even after the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do?

    Hi
    I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs 5, the battery have charge 20 minutes. After the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do? Thanks

    Same thing here. Try putting the brightness down all the way (its hard to see at first but you will get used to it) and one more thing is that close all you open apps. So to do that you have to click the home button twice (after you put your passcode in) and you will see some apps in the bottom. Hold it until there is a red - sign. click all of them so they go away. This does not delete your apps it just makes your ipod better.

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Lent someone mag safe lead and now mac powered but black screen! have reset battery but still nothing. Help please?

    lent someone mag safe lead and now mac is powered but black screen! have reset battery and taken lead out for a few minutes and replugged but still nothing. Help please?

    try pram reset
    http://support.apple.com/kb/ht1379
    if not try recovery mode
    http://support.apple.com/kb/ht4718
    read
    http://www.macworld.com/article/2018853/when-good-macs-go-bad-steps-to-take-when -your-mac-wont-start-up.html

  • Why are only my sleep and home buttons working but the screen doesnt recognise my touch

    So last night everything on my ipod touch 2nd gen was working fine. then when i woke up, only the sleep and home button worked. My screen isnt picking up any sort of touch at all. when i press the on button, it wont let me slide to unlock. when i press the on and home button at the same time to turn it off, it will not let me slide to power off. HELP!!! It is passed the original 90 day warranty (very old no damage though) and i need an answer ASAP

    have you tried charging the device ?
    if so and it still does not work you can try a Forced Recovery..
    by holding the HOME button down and plugging it into your computer at the same time..
    http://support.apple.com/kb/HT1808

  • I've had my new iMac for about a week now and am totally sick of Mavericks, I would appreciate any help you guys could give me to help me 'downgrade' to Mountain Lion. Thanks.

    I've had my new iMac for about a week now and am totally sick ofthe vagueries of Mavericks,
    I would appreciate any help you guys could give me to help me 'downgrade' to Mountain Lion.
    I understand that Mountain Lion has never been released on disc, so that would seem to be the major problem.
    Thanks in advance
    Roy136.

    If the Mac came pre-installed with Mavericks you can't downgrade. Have a look at mine and den.thed's comments here:
    https://discussions.apple.com/message/23946758#23946758

  • HT1212 hi my name is ari and i have an ipod touch newest gen that was disabled and it was given to me disabled ..i downloaded i tunes to my computer but i cant figure out how to reset the ipod to factory settings

    hi i have an ipod touch that was given to me that was disabled and it belongs to a kristien but she no longer lives here and my apple id doesnt work for this ipod and i wasnt to reset the ipod to factory settings so it can be my ipod and i dont know how to go about that

    You can restore from backup since the screen-lock passcode is not restored.
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I have an IPod touch 3rd gen that won't see any wifi connections.

    The wifi doesn't work at all. I tried everything besides restoring it to fix the problem and the back where the antenna is has been pushed in. It just loads like it's looking for wifi, but it doesn't find anything. Any ideas how to fix it? :/

    Likely that the wifi antenna got damaged or disconected. The iPod has to be fixed.
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. May not be wirh it for a 3G.
      Apple - iPod Repair price
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Fix it  yourself if you are up to it
      iPod Touch Repair – iFixit

  • My computer won't power up at all. Battery fully charged. Nothing but black screen.

    I tried to use my Mac Book this morning and it won't power up. The battery is fully charged but the screen stays black. Any ideas?

    Troubleshooting a computer that will not power on
    MacBook Pro: Distorted video or no video issues

  • I have a ipod touch 3rd gen that has been working fine until a week ago.  I usually charge it using a power adapter in the house or using a car power adaptor.  All of a sudden neither will charge my ipod.  It does charge is I connect to computer.

    I have tried different cords.  Other Ipods charge fine.  I have rebooted the Ipod.  I don't know what else to do.

    Hi,
    Try resetting your iPod:  http://support.apple.com/kb/HT1430. 
    If that doesn't work, try restoring it:  http://support.apple.com/kb/ht1414. 
    If all else fails, you will have to place your iPod in Recovery Mode:  http://support.apple.com/kb/HT1808. 
    Hope this helps! 
    ---likeabird---

  • Blank screen at boot. Happened after removing rEFIt. Seems responsive to keyboard input but nothing but black screen.

    Hi, I removed rEFIt and since then I cannot boot. The only thing I get is the startup sound, and after that it is blank/black. I had one random successful boot and I have no idea how that happened. I tried all those hotkey combinations, just to try everything. Like, command+option+p+r and command + r etc.
    It's a 2011 iMac. Hope someone knows what can be done.

    It used to react to the command+option+R+P and reboot, but not any more. Well actually it seems random, some times it works. I would also get some "bleep" sound if I kept spamming keys, but not when it is "not working".
    It shipped with Lion, yes.
    I tried cmd+opt+R now, and I can hear the HD working on something, but since the screen remains black I don't know what is happening. This has also been the case when I pressed and held shift, cmd+R, and various others.
    It really bugs me how random this seems to be.
    I tried to hold options-key to get the startup-menu, no luck. It is as if the display is not activated at all.

  • I have an iPod Touch 4th Gen. that refuses to sync with iCloud calendar. The calendar on my iPod doesn't even show an "add an event" icon! Any suggestions??

    Since upgrading to iOS 5 and Lion, my iPod 4 calendar has become unusable. It will not sync with iCloud or my Macbook Pro. Suggestions?

    Yes. I have already been through every online suggestion on the Tech Support page for iCloud. VERY frustrated at present.

  • I have an iPod touch 4th gen that is disabled and I cant restore it.

    The problem being; this iPod was never set up with a computer.
    What can i do?
    Thanks

    Place the iOS device in Recovery Mode and then connect to your computer/any computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for

  • SCVMM 2012 agent install fails on standalone 2008 R2 host

    I am attempting to install SCVMM 2012 agent and getting this error: Error (421) Agent installation failed on exhpv01.denverwater.org because of a WS-Management configuration error. Recommended Action Ensure that the Windows Remote Management service

  • Add page break to tables in a section report

    I have one sectioned report when I export to excel I can manually add page breaks so that different regions print on a seperate page. However I want to do this in webi. In webi when i highlight the table in the section that i want to have on a sepera

  • Message error ORA-00936 when using JDBC adapter

    Hi all, I'm using the folow scenario: RFC --> XI --> JDBC RFC <-- XI <-- JDBC (response) It's a SYNCHRONOUS interface. RFC call without COMMIT WORK: CALL FUNCTION 'Y_TESTE_NEI'     DESTINATION 'RFC_XI' EXPORTING    DATE_FROM       =  v_data_from    D

  • Achieving precise positioning of conditional dashboard sections

    Working with 11.1.1.7.0. I have three dashboard sections that are conditional.  All three sections are in the same column.  Only one section will be visible at any given time.  The sections "turn off" and "turn on" as designed, in response to a dashb

  • Different value in select one choice inside table in ADF

    Hi ADF Experts, jdev version 11.1.1.5 I have an requirement like I have a table with 1 column as selectonechoice, and each selectonechoice should show different list based on department id. I have don't wan't backing bean approach as mention in below