Gremlin in the works

I swear my computer has got some sort of virus however I've tried ClamXav and no viruses are showing.
I keep getting the kiss of death, rainbow icon (I find it such an irritating icon)
Control, alt, delete doesn't seem to work on G5's
The computer freezes, and Safari can be so temperamental... But there doesn't seem to be any viruses on Safari either.
I have to literally click on restart five or six times for the box to appear same with force quit...
Apart from reloading all the software again which means I lose all my Itunes downloads and all my files (I've got no backup) which seems drastic but I'm sure there's some sort of virus slowing my machine down
Can anyone recommend a good virus checker for Macs that is preferably free!

"I swear my computer has got some sort of virus"
You have no virus because no viruses exist that run on Mac OS. There were a few trojans some months back, but were of little concern.
"Control, alt, delete doesn't seem to work on G5's"
Naturally, as that is a Windows command. Use Apple-Option-Escape
"which means I lose all my Itunes downloads and all my files (I've got no backup) "
Then do a backup. What's stopping you? If you can't access them easily, hook up to another Mac and use FireWire target disk mode to grab the files.
What troubleshooting steps have you taken? Have you used Disk Utiltiy to repair file/folder permissions? Have you booted from the Software Install DVD and run Disk Utility to check for directory damage to the file structure? What about Disk Warrior? Do you have a copy?

Similar Messages

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8a
Medium               - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8c
Medium               - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              ei0t
Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87                Medium               - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!

Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Code to derive the Work Week (ISO IW doesn't fit the requirement)

I could use some assistance with my pl/sql code to derive the work week from the current date.
If January 1st lands on Thursday, Friday, or Saturday, the work week for January 1st is '53'. If January 1st lands on Sunday, Monday, Tuesday, or Wednesday, the work week for January 1st is '1'.
I think I have the logic down, but my pl/sql is admittedly weak.
This is what I have thus far:
create or replace procedure work_week_fn (work_week DATE) IS
first_year_day INTEGER;
my_work_week INTEGER;
BEGIN
SELECT '01-JAN-'||to_char(to_date(sysdate, 'DD-MON-RR'), 'YY') into first_year_day from dual;
SELECT to_char(to_date(sysdate, 'DD-MON-RR'), 'WW') into my_work_week from dual;
IF first_year_day IN ('SUNDAY','MONDAY','TUESDAY','WEDNESDAY') THEN
dbms_output.put_line(my_work_week);
ELSE dbms_output.put_line(my_work_week + 1);
END IF;
END;
It's compiling, but I'm not getting the result I need. Any suggestions?

Hi tk,
I'm not able to reproduce.
SQL> set serveroutput on
SQL> with t as (
select trunc(sysdate, 'Y') + level - 1 dte from dual
connect by level <= 20
select dte, to_char(dte, 'DAY') dte_day, to_char(dte, 'D') dte_d, to_char(dte, 'IW'),
       case
         when to_char(dte, 'IW') IN ('01','53') or
             to_char(dte, 'IW MM') = '52 01' then
           case
             when to_char(trunc(dte, 'Y'), 'D') > 4
               or to_char(dte, 'IW MM') = '01 12'
             then 53
             else 1 end
         when to_char(trunc(dte, 'Y'), 'D') > 4 then
           to_char(dte, 'IW')-1
         else
           to_char(dte, 'IW')+0
       end work_week
from t
DTE      DTE_DAY D TO WORK_WEEK
09-01-01 TORSDAG 4 01          1
09-01-02 FREDAG 5 01          1
09-01-03 LØRDAG 6 01          1
09-01-04 SØNDAG 7 01          1
09-01-05 MANDAG 1 02          2
09-01-06 TIRSDAG 2 02          2
09-01-07 ONSDAG 3 02          2
09-01-08 TORSDAG 4 02          2
09-01-09 FREDAG 5 02          2
09-01-10 LØRDAG 6 02          2
09-01-11 SØNDAG 7 02          2
09-01-12 MANDAG 1 03          3
09-01-13 TIRSDAG 2 03          3
09-01-14 ONSDAG 3 03          3
09-01-15 TORSDAG 4 03          3
09-01-16 FREDAG 5 03          3
09-01-17 LØRDAG 6 03          3
09-01-18 SØNDAG 7 03          3
09-01-19 MANDAG 1 04          4
09-01-20 TIRSDAG 2 04          4
20 rows selected.Must depend on some NLS setting?
SQL> set serveroutput on
SQL> select * from nls_session_parameters
PARAMETER                      VALUE
NLS_LANGUAGE                   DANISH
NLS_TERRITORY                  DENMARK
NLS_CURRENCY                   kr
NLS_ISO_CURRENCY               DENMARK
NLS_NUMERIC_CHARACTERS         ,.
NLS_CALENDAR                   GREGORIAN
NLS_DATE_FORMAT                RR-MM-DD
NLS_DATE_LANGUAGE              DANISH
NLS_SORT                       DANISH
NLS_TIME_FORMAT                HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT           RR-MM-DD HH24:MI:SSXFF
NLS_TIME_TZ_FORMAT             HH24:MI:SSXFF TZR
NLS_TIMESTAMP_TZ_FORMAT        RR-MM-DD HH24:MI:SSXFF TZR
NLS_DUAL_CURRENCY              €
NLS_COMP                       BINARY
NLS_LENGTH_SEMANTICS           BYTE
NLS_NCHAR_CONV_EXCP            FALSE
17 rows selected.Regards
Peter

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

Workflow loop, return the work item to the inbox, instead of automatically executing the work item

Hello all,
Within a workflow I have a loop. Inside that a foreground step is executed. Then a condition step is executed to decide if the workflow should continue, stop, or return the work item to the inbox.
This new workflow was modeled after an existing workflow that is doing just that. Unfortunately, this new workflow is not returning the work item to the inbox. Instead, it just keeps displaying the screen that is called by the function module that is called by the business object method that is executed when the foreground task runs.
I've included a Word document with further detail in a number of screen prints. Hopefully this is something that will experience workflow developer may have seen before and know how to correct.
Unfortunately I have done very little workflow development and don't have a clue what might be causing this problem.
Any help would be greatly appreciated.
Bruce
I could not attach a Word file, so I added 3 jpg files. I would have added another 3, but it seems that posts are limited to 3 files.

Hi Bruce,
As per your design, If you are approving or returning, the workflow loops back to the step "Approver - stat key approve".
Suppose you are one of the approver for this step ""Approver - stat key approve" and if you click on approve or return, then it will try to create a new workitem for "Approver - stat key approve" step.
As you are one of the approver again, the window opens immediately instead of reaching the inbox of all other approvers.
Include a dummy activity step in the "approve & return" condition outcome.
Active the workflow & refresh the buffer SWU_OBUF.
After this, when you click on return it will not open the same screen again. Instead it will be reaching all the approvers' SAP inbox.
Thanks,
Karthikeyan

The work book does not exist in the document store

Hi Forum,
Has anyone come accross this error "The work book does not exist in the document store" I just changed the description of my Work book in Development and saved. Now it wont open. The error message is "The work book does not exist in the document store". I already have this work book in Q. So I cannot create another one with a different tech. name. Someone please help

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

How can I share the work iTunes with my home iTunes so I can work from home? Need to be able to share playlists and files for editing tracks.

I've just started working for a media company that provides the music for sporting events. They use iTunes to create playlists that I have to load into an IR machine with hot keys. I also have to edit tracks to create new stings and intros. As there is a 2.5 hour commute, I want to access the work iTunes library from my home MBP so I can work from home. When I'm at work I can share the work iTunes library, but when I'm back home I can't use it. Any ideas of how I could effectively Home Share over the internet with two seperate iTunes accounts?
The work iMac is running 10.7.5 and my MBP is 10.8.4

In that case, does anybody know of a program or workaround that will make this so?

How to delete a shortcut favorite from the browser in the WORK Area

Hiho,
creating a shortcut favorite icon of a browser-website in the work area shows up a symbol to use this shortcut. In the private area I can delete this favorite-symbol by tapping longer on the icon an a trashcan shows up, so I can delete the icon (and the browser favorite from the private area). Not so in the work (buisiness) part of the BlackBerry, there is no possibility to delete this icon. I can't find a policy on the BES10 server or thomething on the Z10, any ideas how i can remove the icon?
Greetings... Ifrani

Hi Ifrani!
I´ve the same problem on my Z10!
CommanderApollo

I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks

I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks

Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?

HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal accou

Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?

You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

HT2506 I use Preview to edit photos, and would like to know if there are any Preview updates in the works. I find there is a problem with Preview crashing, or taking a very long time to "catch up" (spinning beachball of death) while I'm editing.

I use Preview to edit photos, and would like to know if there are any updates to this program in the works. It seems Apple is constantly updating its software, except for Preview. I find it crashes all too often, and also takes forever to "catch up" with me (as in spinning beachball of death) when I'm editing a lrge amount of photos. Yes, I know I should be using Photoshop or somesuch, but it's just too **** confusing, and I don't have the time to figure it out. Thanks!!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

500 internal server erro while opening the work item

Hi
In my report manager 's UWL to approve the expense of his employee while clicking on the workitem he is facing the error
5oo internal server error .Failed to process request .Please contact your system administrator.
Root cause :
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: pdfSource of InteractiveForm UI element should be populated with pdf binary content in USE_PDF mode
Could any one help me out to solve this issue.
Note: This is not the first time the report manager approving earlier whenever he clicked on the work item he is able to find the dispaly of the form .But for the last two days this is not displaying any form instead it is showing the error. This is happening to every user.
When i tested in development server it is working fine now.
When i asked the basis gusy if they made any modifications according to them they have not done nay modificaions.
Thanks in advance.

Hi
where do we chek whether ADS is configured proeprly or not .If it is visual admin can u please let us know what to check because when i asked our basis team they said it is working fine .
I woul like to cross verify it . Can u please let me know the path .
Thank you very much

Gremlin in the works

Similar Messages

Maybe you are looking for