Gremlins Strike After New Year

Well, Y2K came almost a decade late but it seems that the new year has brought some new gremlins to my previously acceptable 7216 DVR as well as my non-dvr STB. The DVR no longer does basic functions like pause or rewind on "live" programs - if I can make it pause after repeated button presses, there is no saved content to rewind through (it jumps ahead to real time). There are also lip-synch issues for the first time ever. Multiple hard reboots have limited effect as the symptoms sometimes manifest, and sometimes don't. Also, I had to do a hard reboot on the non-DVR HD STB for the first time ever since the TV display said "no signal". As stated, I never had problems like this, mostly because I faithfully do a hard reboot twice a week. Now it doesn't seem to matter. I wonder if the new year (leap year?) messed up the software? Not being an engineer, this is very frustrating and I truly believe these hardware issues (see this forum) to be the Achilles heel for Verizon FIOS. Verizon must rectify the hardware reliability factor soon. Thank you.

retiredme wrote:
Well, Y2K came almost a decade late but it seems that the new year has brought some new gremlins to my previously acceptable 7216 DVR as well as my non-dvr STB. The DVR no longer does basic functions like pause or rewind on "live" programs - if I can make it pause after repeated button presses, there is no saved content to rewind through (it jumps ahead to real time). There are also lip-synch issues for the first time ever. Multiple hard reboots have limited effect as the symptoms sometimes manifest, and sometimes don't. Also, I had to do a hard reboot on the non-DVR HD STB for the first time ever since the TV display said "no signal". As stated, I never had problems like this, mostly because I faithfully do a hard reboot twice a week. Now it doesn't seem to matter. I wonder if the new year (leap year?) messed up the software? Not being an engineer, this is very frustrating and I truly believe these hardware issues (see this forum) to be the Achilles heel for Verizon FIOS. Verizon must rectify the hardware reliability factor soon. Thank you.
Try getting Tech Support to do a reset on your equipment. That may resolve the issues you're having. I was experiencing some problems that a hard reboot no longer fixed (although it had on previous occasions). After they did the reset, the problem I called about as well as several other minor issues I was having, were all fixed (for now anyway). I also have lip-sync problems (written about in another thread. It's a recurring problem that gets worse with time.) A reset from Verizon always greatly improves this, although it doesn't outright fix it. (Lots of speculation about whose fault this problem is and most fingers point back to the broadcasters. My thought on this is if they were actually the cause, why doesn't everyone experience this problem and why does the reset improve the sync???) So, calling in for a reset might be worth a try. (Maybe they ran a gremlin elimination program along with the reset?!?!)

Similar Messages

Date & time problems after new year

Hi,
First of all, HAPPY NEW YEAR!
After the new year my date and time is always changing to a date in the year 1969. I do reset it whenever I turn my pb on. But it always goes back when I turn it off. What could be the reason?

Hi, zoha. Your internal PRAM battery is dead and needs to be replaced. It's just coincidental that it happened to die at the end of the year.

My iPhone won't connect to the Internet after new year. What can I do?

WHy won't my iPhone 6 connect to the Internet after the new year? My wife has the same phone and it works. I have tried wifi or lte. I woke up this morning jan 1 2015 and it will not connect to anything.

Settings>General>Reset
Choose Reset Network Settings
Your phone will restart. Test internet after that.
~Lyssa

IPhone 5 Apps won't open after New Years Eve

I got a new iPhone 5 for Christmas. Everything was working fine up until New Year's Eve. On January 1st non of my Apps will open. I've deleted them manually from the phone and reinstalled them from the App Store, powered phone off, put phone in airplane mode and non of my purchased Apps will open. Only Apps that work are those that came pre-installed. I'm thinking I might just go back to using my 3GS never had an issue.

Panic over!!! I just hit one of the apps and it opened....not sure what is going on but all looks good now. Phew what a relief.

My iphone 5 is showing my imessage to someone has been delievered but isnt stating that it has be read, even though those i text have the setting on. It worked just after new year but somehow doesnt seem to work not sure how to fix it :( help anyone

please help im not sure how to fix this problem. It should work but has stopped working for some reason.

its already sorted my friend who has it already swwitched on turned it off and switched it back on again and its working on my phone okay now just need to check with other contacts if they have it on or not but thanks

'You can post in new year only after closing the previous year

Hello Experts,
I am also getting same error while executing depreciation run AFAB ''You can post in new year only after closing the previous year''.
I found one OSS Note 18800 and it is saying solution as below ...
At the first depreciation posting in the new fiscal year after a shortened fiscal year, the fiscal year variants must, in all cases, still be entered in asset customizing and in FI customizing for the affected company code. If necessary, all periods for the following fiscal year must be maintained with the variant of the shortened fiscal year.
Up to 2.2D the following correction must also be installed:
Please carry out the syntax check only in main program SAPLAFAR.
But in my case there is no shortended fiscal year.
Can I apply this OSS note correction instructions ?
Please suggest me.

Hi
I don't think so. Moreover that is applicable till 2.2D.
Moreover depreciation is to be run for all periods you have not run earlier. Please check upto which period dep run has happened. Thereafter close the fiscal years in order thro AJAB.
S Jayaram

After GL Year opening the months of new year are not appearing in open period window of Gl?

Hi All,
After GL Year opening the months of new year are not appearing in open period window of Gl? Am i missing any thing???
regards
Shahzad M. Saleem

Have you checked GL setups
Setup accounting manager >
Query your OU >
Under setup steps click on Update for ledger
Under accounting calendar
Number of future enterable periods.

Depreciation run problem."You can only post in new year after closing the"

Hi,
We are implementing Asset accounting to one of our co code.New Assets were created in Jan and when I tried to Post depreciation for Jan, I get an error log that says "You can only post in new year after closing the previous year."
When i double click on error message.
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
So I went ahead and opened the previous year, posted the depreciation, closed the year and tried to post Period 1 again, but still get the same error.
Why do I need to post the previous period if I just created the assets in this period?
I Have completed AJRW, AJAB also.
I think it may be a problem with Table. Please suggest me.
Thank you

Hi,
Please check the following :-
1. Check the Last Closed year in your Asset Accounting.
2. Check the Last Depreciation Posted in Your Asset Accounting.
These 2 menus are available in "Data Transfer in Fixed Asset Accounting".
revert back to me for further actions,
regards
N.Kumar

Asset You can only post in new year after closing the previous year

Hi Experts,
I am getting below error while running the depriciation:
You can only post in new year after closing the previous year.
Message no. AA687
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
Note : I closed FY09, even though there were no assets in it at the time. The first asset was capitalized on 12/29/09 (clearly in FY10). I tried closing FY09 again and got the messege No year-end close is necessary for company code XXXX .
Could you please any one help me on this.
Thanks In Adwance
Regards,
Saritha.

Hi Saritha,
Please check the following settings:
o Is there one ore more years since the last depr. run?
Solution: in this case an entry must be made into the table TABA.
                  Note 144441 gives a solution to make a "Dummy-entry".
o If there was never a depreciation run, the there must be 000/0000 in
TABA and T093D.
Solution: please take the report from the note Note 144441
                  and put the values 000/0000 in this fields.
o Do you have a non-calendar fiscal year (e.g. 2009/10)? In this case
    you should have in the field T093D-AFBLG the year 2010.
    Solution: Correction with note 26073
regards Bernhard

HT5690 Can I Register A New Register An AppleCare Agreement After 2 Years Extension For My iMac?

Hello, I bought my iMac, a mid 2011 model in september 2011 & then got an AppleCare agreement after 2 years which extended my coverage to 2014. Now I have a question - Can I buy a new AppleCare agreement to increase the coverage till 2016? Thanks.

No.
(88631)

You can only post in new year after closing the previous year.

Hi,
I got error "You can only post in new year after closing the previous year." when I tried to run depreciation for first time for a company.
In OAAR, it was noted that FY2008 already closed.
Please advice.

I understand you did the asset upload in 2008 and want to run the first depreciation run for 2009?
In that case have a look in your take over data settings: SPRO:
Financial Accounting / Asset Accounting / Asset Data Transfer / Parameters for Data Transfer / Date Specifications / Specify Transfer Date/Last Closed Fiscal Year
This should be 31-12-2008 (if the calendar year is the same as the fiscal year)

Dep Error:AA687-You can only post in new year after closing the previous year.

Hi Experts,
I need solution on error while posting dep. we have new co cd started operative from Jan -14 . So while doing dep posting run we are getting error "AA687-You can only post in new year after closing the previous year".
I searched and got that Note 144441 need to implement.
Let me know whether is it fine to go ahead or Is there any alternative solution.
Also i want to know what need to to be done after implementing this note.
please reply , its bit urgent.
Regards
Atul

Hi Deepanshu,
Also the FI period is also closed 2013 so in this case do i need to open the same , correct? for running dep posting along with OAAQ opening for AA.
Or the note implementation will take care all. instead of running dep , opening closed period.
pls suggest.
Regards
Atul

My iPhone5 was locked Telnor in Norway 1 year. I send phone to be repaired. Thei give me a new phone with other IMEI number without telling me. Ichanged to a new operator after 1 year. They could not open because of new IMEI number.

My iPhone5 was locked at Telnor in Norway for 1 year. I send iphone to be repaired. Thei give me a new phone with other IMEI number without telling me. Ichanged to a new operator after 1 year. I asked the old operator to unlock my phone, but thei could not do that because i have a new iphone with new IMEI number. What must i do to get this fixed? Magne

Any replacement device is going to have a new IMEI. You need to contact whomever replaced your device (Apple or Authorized Apple Service Provider) and work through them and your carrier. You should have some paperwork from the replacement to show the carrier.

Adding Period Indicator to New Year after creating draft documents in New Y

Hi,
I want to restart the the numbering from 1 in the New Year and so want to attach a new Period Indicator to the New Year. But i am unable to Add Period Indicator to New Year. It was created with Default Period Indicator and is not allowing any change.
I am in SBO 2005 PL38. Also pleas note, some drafts have been created in the New Year.
What i tried:
- I tried deleting the draft documents. No use.
- I changed server date to March 31(previous Accounting Year). No use.
Anybody can help?
Regards
Manish

Hi Manish,
Let me see if i understood your issue;
You are unable to creat a new period indicator for the new numbering series, did you already creat a new posting period for the new year ?
The drafts created in the new year are with the default period indicator ? if so can you change it and try to delet those drafts ?
if you have opportunity please provide more information.
Regards
Emanuel

Why is imported video from 2009 moving to new year after restarting Imovie?

We have successfully imported video from 2009 in a series of events; all seems to be working fine until we close out of imovie and return -- and then the events have moved to a new year (2011). When we click on the event that has moved to 2011, we get the message "no matching video". The video is on the hard drive; I tried to use "import video", but it is not recognized. This isn't happening systematically - just some clips from the same miniDV tape. Any ideas? thanks!

Hi
What was Your Canon set to.
Recording Size: 1920 x 1080 (Full HD): 30p (29.97) / 24p (23.976) / 25p, 1280 x 720: 60p (59.94) / 50p, 640 x 480 (SD): 60p (59.94) / 50p), Movie Crop recording in 640 x 480
What kind of project did You set up ?
Yours Bengt W

Gremlins Strike After New Year

Similar Messages

Maybe you are looking for