Grey and Blue screen but computer won't start up and I don't have a start up disc

Help!
I cannot get my computer to start! Yesterday I was using powerpoint and the screen started to split in two and not repond. I turned off the computer and then grey apple screen on start up was striped, followed by a blank grey screen. After a minute the fan started to sound very loud but the computer would not start up. I did a safe reboot followed by resetting the PRAM and eventually the stripes dissappeared and it started normally.
Once it was turned on everything worked fine other than powerpoint. The split screen happened again when I tried to use power point, but it re-started normally and I forced power point to quit on re-start. It has worked all day without a problem.
This evening I left it open and the screen was black and unresponsive when I came back. I forced it to turn off but again I am faced with the stripey screen, then the grey screen of nothingness. A couple of times it's gone beyond that to a stripey blue screen.
I've tried re-setting PRAM, safe login in, and I've tried pressing command on start up to go in to the repair disc- it will let me pick the disc from the drop down menu but then goes no furhter than the grey screen.
My husband has lost my start up/ set up discs and it is nolonger in waranty. I also thought everything was backed up on Icloud but it doesn't seem to be there!
Is there anything I can do?! Please help!

Spaniel-Rose,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from Apple or iFixit.

Similar Messages

  • I am trying to active my iPhone but it won't let me because i don't have a sims card

    I am trying to active my iPhone but it won't let me because i don't have a sims card. I just want to use my old iPhone 4 as an iPod.

    You could ask a friend that has a SIM-Card or stop by an Apple Store. They may be able to help you. The card is only required for a few seconds, until the device is activated. Then you can take it out and give it back.

  • I'm trying to upgrade my macbook to yosemite, but it won't let me because I don't have mavericks! How do I get mavericks?

    I'm trying to upgrade to Yosemite, buy it won't let me because I don't have Mavericks! How do I get Mavericks?

    Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing.

  • I have a new ipod touch 32 gb.  I want to sync 2,250 songs from itunes, but it won't sync - it says I don't have enough space.  A 32 GB is suppose to hold up to 7000 songs!  I have not put anything else in it.  What am I doing wrong?

    I have a new ipod touch, 32GB, 4th gen.  I tried to sync the 2,250 songs I have in itunes to the ipod, but it says I don't have enough space.  This ipod is supposed to hold up to 7000 songs.  I haven't put photos or anything else in this ipod.  What am I missing?

    donna-jay-dee wrote:
    I have a new ipod touch, 32GB, 4th gen.  I tried to sync the 2,250 songs I have in itunes to the ipod, but it says I don't have enough space.  This ipod is supposed to hold up to 7000 songs.  I haven't put photos or anything else in this ipod.  What am I missing?
    What is the format of your songs?

  • I was editing photos and it was getting stuck or frozen and working really slow, so I attempting to close aperture and reopen it but it won't quit aperture and now it won't open up to my photos either.  Any ideas?

    I was editing photos and it was getting stuck or frozen and working very slowly.  I attempted to restart the computer but it would not allow me to quit aperture.  Now aperture appears in my toolbar but will not open up so I can work on any photos.  Any ideas?

    Did you try opening from the Applications folder?
    Depending on how far that gets you, I would also take a look at the Troubleshooting Basics.

  • TS1424 I preordered an album, and it's greeted out and says purchased but I won't download. And it's not in my library? What can I do

    I preordered an album. It Didn't download but says purchased it doesn't give me the option to download what can I do ?

    Hi Doomstick,
    Thanks for using Apple Support Communities.  This article has some information about pre-orders and how to download them:
    iTunes Store: About pre-orders
    http://support.apple.com/kb/ht5714
    However, if that doesn't work for you, this article has instructions for downloading items already purchased again:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Cheers,
    - Ari

  • I'm trying to purchase shogun 2 but it won't let me because I don't have enough disk space, I managed to free 33Gbs but still nothing, how much free space do I need for that?

    It doesn't even let me download Empire Total war which is 13gb

    First, the App Store will not allow a download that, when expanded, would leave less than the minimum amount of available space on the startup volume that Apple considers necessary, which is about 9 GB. The download is a compressed archive that will usually expand to about twice its size. Both the archive and the expanded files will be present at the same time, so the actual amount of space needed is about three times the size of the archive.
    If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
               ▹ System Preferences... ▹ Time Machine
    If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

  • My phone keeps displaying a white screen with the apple, then occasionally flicks to a blue screen, but won't turn on! HELP!!

    My phone keeps displaying a white screen with the apple, then occasionally flicks to a blue screen, but won't turn on! HELP!! I have had it on charge all day and have tried plugging it in to my computer to sync.

    Restore your software using iTunes.
    Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.
    You should be able to restore your backup file after this procedure. If the problem comes back, you either have corruption in your backup file, or a serious hardware problem that should be looked at by a tech at the Genius Bar (make an appointment first).

  • I downloaded a song on iTunes, it won't play (it's name is grey), it shows up in purchased and says "play", but it won't play, I can't delete it, and I can't re-download it.....this is confusing please help!!

    I downloaded a song on iTunes, it won't play (it's name is grey), it shows up in purchased and says "play", but it won't play, I can't delete it, and I can't re-download it.....this is confusing please help!!

    Hello CTGame,
    Welcome to Apple Support Communities.
    It sounds like there’s a grayed out song in your iTunes library that can’t be played or downloaded again like other past purchases. Try taking a look at the article linked below and verify the computer is authorized to play that content.
    How to troubleshoot iTunes Match - Apple Support
    Songs appear to be missing
    Songs containing DRM (Digital Rights Management) might not appear in iCloud, or might appear grayed out. This can occur if your computer is not authorized to play that content. Try authorizing your computer, then manually update iTunes Match. To determine what Apple ID your computer needs to be authorized for to play a specific song:
    Locate and select the song in your iTunes library.
    Choose File > Get Info.
    In the Summary tab, locate the Account Name field in the right column. Write it down.
    Click OK.
    Choose Store > Authorize this Computer.
    Type in the account name from the Summary field and enter its password. Click Authorize.
    Choose Store > Update iTunes Match.
    So long,
    -Jason

  • My laptop won't turn on it shows the blue screen but won't come on. Help?

    My laptop won't turn on it shows the blue screen but won't come on. Help?

    Try resetting the SMC
    http://support.apple.com/kb/ht3964
    If it has a removable battery, try removing the battery.
    If neither works, then you may need to bring it in for service.  Bring the power adapter as well, as you may be able to determine if it is the power adapter at fault, or the computer's power supply.

  • Grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced 6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen

    grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think  it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
    Thanks for any help!

    You have to take the computer to the Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

    My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

    If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
    If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
    PC : http://support.apple.com/kb/TS1538
    Mac : http://support.apple.com/kb/TS1591

  • Gray screen after boot and blue screen with stripes

    Hi, I have a MacBook Pro Mid 2011 with Mavericks (came with Snow Leopard).
    History:
    One day i was working and things were too slow. I tried to restart but it was taking too long to close all the programs. So I forced shut down by holding the power button. When I turned it on again, my problems begin.
    Problem:
    The Apple logo and the spinning wheel appear. After a while, both disappear and it freezes at gray screen. Some solutions I tried make the screen goes blue with black vertical stripes. In both cases, I have to force shut down.
    Solutions I tried:
    - Reset NVRAM
         It does reset, but nothing change
    - Log in my Windows partition. I can't log
    - Hold option key and choose recovery. Blue screen
    - Recovery system by restart and press Command-R. Blue Screen.
    - Safe boot by pressing Shift. Blue Screen
    - Verbose by pressing Command-V. Restart and gray screen again.
    - Single-user mode by pressing Command-S
         Tried to reapair hard drive:
              /sbin/fsck –fy
         Returns the message "** The volume Macintosh HD appears to be OK.". I restart and nothing change.
         Tried to change startup permissions:
              mount -uw /
              chown root /
              chmod 1775 /
              exit
         Restart and nothing change.
    - Boot from a bootable USB flash drive
         Holding option key, I choose my flash drive with Ubuntu installed. It gives me 3 options: Use Ubuntu without installing, Install Ubuntu, Repair Disk      Errors (something like that). The 3 options go to the blue screen
         Flash drive with Mavericks. Blue screen.
    -Boot from my Snow Leopard CD. Gray screen, restarting, gray screen.
    I don't what else I can do. Is it a hardware problem? At first I thought it was some corrupted file. But is it a GPU or logic board problem? What else can I try?

    I found this to work at least to get in and backup some files. It is VERY important to put these commands in EXACTLY as seen here, including spaces.
    Boot into Single-User mode (Command-S while booting up)
    Execute the following commands:
    /sbin/fsck -fy /
    /sbin/mount -uw /
    mkdir /Disabled_System_Library_Extensions
    cd /Disabled_System_Library_Extensions
    mv /System/Library/Extensions/ATI* .
    mv /System/Library/Extensions/AMD* .
    touch /System/Library/Extensions
    exit
    I guess these two graphics extensions go bad quite often on Macbook Pro 15-inch.  They are part of the logic board. The only problem I had was I still couldn't get into my computer any other way, and the graphics for Safari were messed up.  Firefox was okay.  Good Luck!
    Here's the original thread:
    http://apple.stackexchange.com/questions/120507/boot-hangs-on-grey-screen-even-w hen-booting-from-usb-drive-with-fresh-os-x-inst

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Maybe you are looking for

  • Copying protected aac audio book

    Is there any way I can backup a protected aac audio book downloaded from iTunes. I have my music backed up on an external hard drive. I would like to back up my book on a cd if this is at all possible. Thanks for your help in advance dave

  • Append list values under Field selection per Mvt type (MIGO)

    Hi Experts, Can we append list of values for u2018Field Nameu2019 in case of Setting for goods movement (MIGO), under Field selection per Mvt type. We want to append values for 101 Mvt type. Current values are CUSTNAME Customer EXVKW Sales Value GRUN

  • How to configure SC dependencies in SLD (while creating DCs)

    Hi I have gone through some pdf but still i am not clear how and why DCs are used.... what is advantages of using DCs? I am trying to work on DCs(Development Components)... i have gone through one PDFs... In that first they have created product and s

  • How to get pics in the iphoto app for iphone back onto my macbook pro

    I need to know how to get my pics that are stored on iphone in the "iphoto app for iPhone" back onto my macbook pro's iphoto. macbook was recently wiped out (i didn't back up) during Genius Bar repair

  • I Can´t apply a batch adjustmets

    I want to apply the same adjustments to a selected group of images. First I do these adjustments to an image, then I select a gruop, and apply a Lift & Stamp, but only one image is stamped. What should I do? Regards. Guillermo