Grey bar through QT thunbnail, QT not working in ProApps!

I'm on the latest Macbook Pro 2.66Ghz Intel I7
OSX 10.6.3
Quicktime 10.0 (113)
My quicktime movies all display with a grey bar through the preview thunbnail on the desktop and on my external drive! And when trying to edit some footage inside Final Cut Pro 7 I get speratic issues in the canvas including Grey freezes, Distorsion, gliches.
I put the external drive on another mac and the files are ok so it leaves me to believe it's just within this mac. Also the issues pop up in Imovie so it's not FCP either. It's Quicktime problem!
I'm an advanced user and have done all the usual fixes including disk utility, reset PRAM, trash prefs.....
Can anyone please help me?

I have flash player and it works fine, but the affordable affiliates site wants to play the movie in QT.
It is not just with these two sites. QT Player plays the video but there is no sound on the video, and when QT loads to play an mp3 there is no sound.
Can anyone help me?

Similar Messages

What key(s) do i type to change language from english to other? i am writing s story in dual languages. i was told to click command and space bar together but it is not working.

what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.

Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language.

Yahoo mail tool bar (delete,more,spam,etc) not working in firefox.Works in Explorer.Web points to Mozilla update."Plug-ins" up to date. Solutions?

Yahoo mail tool bar (delete,more,spam,etc) not working in firefox.Works in Explorer.Web search points to Mozilla update problem."Plug-ins" up to date. Solutions?
I've used firefox for years now with out problems. Now that help is needed, Could you make this any more frustrating? I thought I was asking Mozilla help and I'm sent to "users". I went there 1st! there are similar questions but no answers. I've lost time and data. Is there any REAL PEOPLE to help with firefox problems?

I'm a real person, thanks.
If you mean, does Mozilla have paid staff you could phone or email, the answer is "No."
Is the problem with a feature of the Yahoo! mail web page itself, or the Yahoo! toolbar?
General advice:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
* click the padlock or globe icon in the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
''If Firefox is not running:'' Hold down the Shift key when starting Firefox.
''If Firefox is running:'' You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
and OK the restart.
''Both scenarios:'' A small dialog should appear. Click "Start in Safe Mode" (''not'' Refresh).
Any difference in how Yahoo! works?

Ipad screen has a massive grey bar through it??

I turned on my Ipad this morning, and it seemed to be working just fine, except that there was a thick, pixilated grey bar right through my screen. I tried restarting it several times, but nothing changed. I connected it to power and it didn't go away. I haven't tried connecting it to my computer yet, as my computer is broken at the moment (not my fault, I'm just really unlucky) but I'm pretty sure this is a hardware problem, so that wouldn't help anyway. I haven't dropped my ipad, put it in heat or humidity, got water on it, put it in extreme cold or treated my ipad roughly. It stays in a case safely on my desk whenever its not in use. I have only had it for just over two months, so I am very annoyed that it has broken after such a short time. Anyone have any advice?

Well mrdoozie, you're lucky. I bought an I pad in dec 2010 and had the same issue (grey,black bar about 2 inches thick just above of centre across the screen with multicolored thin lines in some place inside the bar) develop about 20 days ago. I took it to the apple authorized service centre in mumbai, India and they said apple has not authorized anyone in India to open it and repair and given its a hardware issue and warranty expired in december 2011 they can replace it for a cost of Rs 23,000 eq to $ 480!
I did not think it was worth it. First I did not expect apple to make hardware that could develop such kind of issues. And if it such a regular thing then they should repair or replace if it's not the fault of the user. .
So I took it back and decided I will buy a new galaxy tab instead. With samsung, don't have this kind of support issues in India.
I can't use this I pad because all the messages come in the centre and do not move up or down so get covered by he bar.
I should have realized this early when within 3 months my adapter got burnt. I ignored it. For those who may think it may be a voltage issue in my house, I charge my iPhone thro the same socket with the same chargers

Alert set through timer job is not working in sharepoint 2010 as expected

Hi,
I create the standard sharepoint alerts through timer job.
in my timer job, i loop through a list and based on the user value in the alert to field i create alert for the users and the condition for the alert are only when new items are created and something changes in the below view.
all the properties are set fine. Email triggered on new items additions and on specific daily or weekly summary.
The view filteration is not working at all:(
But after the timer job ran and set the alert, if i open the alert settings on UI and without changing anything if i click ok , then the view filteration is happening and alerts are working fine.
What is wrong here? is it a bug or anything am missing?
Aruna
try
SPList Configlist = web.Lists.TryGetList("Configuration");
foreach (SPListItem oItem in Configlist.Items)
ProfilePicker = oItem["ProfilePicker"].ToString();
ProfileViewer = oItem["ProfileViewer"].ToString();
string MIS = oItem["MIS"].ToString();
SPList list = web.Lists.TryGetList(ProfileViewer);
SPList ProfileList = web.Lists[ProfilePicker];
foreach (SPListItem oItem in ProfileList.Items)
frequency = oItem["Frequenzy"].ToString();
created = (DateTime)oItem["Created"];
string createdDate = created.ToString();
createdDate = DateTime.Parse(createdDate).ToShortDateString();
DateTime today = DateTime.Today.Date;
string dateonly = today.ToString(); ;
dateonly = DateTime.Parse(dateonly).ToShortDateString();
SPFieldUserValue fieldValue = null;
SPFieldUser UserColumn = (SPFieldUser)oItem.Fields.GetField("Alert_x0020_owner");
fieldValue = UserColumn.GetFieldValue(oItem["Alert_x0020_owner"].ToString()) as SPFieldUserValue;
if (fieldValue != null)
alertowner = fieldValue.User;
alert = alertowner.ToString();
//if (createdDate == dateonly)
SPUser user = web.EnsureUser(alert);
SPAlert newAlert = user.Alerts.Add();
newAlert.AlertType = SPAlertType.List;
newAlert.List = list;
newAlert.DeliveryChannels = SPAlertDeliveryChannels.Email;
newAlert.EventType = SPEventType.Add;
if (frequency == "Daily")
createDailyAlert(newAlert, list, user);
else
createWeeklyAlert(newAlert, list, user);
catch (Exception ex)
// Danfoss.Sharepoint.Logger.DanfossLogger.LogToOperations(ex, "Exception occurred in setting the profile alert", 0, EventSeverity.Error, DanfossExceptionCategory.General);
private static void createDailyAlert(SPAlert newAlert, SPList list, SPUser user)
newAlert.Title = "My Daily Profile viewer Alert";
newAlert.AlertFrequency = SPAlertFrequency.Daily;
newAlert.AlertTemplate = list.AlertTemplate;
newAlert.AlertTime = new DateTime(DateTime.Today.Year, DateTime.Today.Month, DateTime.Today.Day, 10, 0, 0);
newAlert.AlertTime = newAlert.AlertTime.AddDays(0);
SPAlert existingAlert = null;
newAlert.Properties.Add("filterindex", "4");
newAlert.Properties.Add("viewid", list.Views["Daily Alert"].ID.ToString("D"));
newAlert.Properties.Add("filterpath", string.Format("{0}/", list.Views["Daily Alert"].ServerRelativeUrl.TrimStart('/')));
foreach (SPAlert alerts in user.Alerts)
string al = alerts.AlertFrequency.ToString();
// Filter down the alert to the list you wish to report on.
if (al == "Daily")
// Found your existing your custom alert. Don't create one.
existingAlert = alerts;
if (existingAlert == null)
newAlert.Update(false);
private static void createWeeklyAlert(SPAlert newAlert, SPList list, SPUser user)
newAlert.Title = "My weekly profile viewer Alert";
newAlert.AlertFrequency = SPAlertFrequency.Weekly;
newAlert.AlertTemplate = list.AlertTemplate;
newAlert.AlertTime = new DateTime(DateTime.Today.Year, DateTime.Today.Month, DateTime.Today.Day, 10, 0, 0);
newAlert.AlertTime = newAlert.AlertTime.AddDays(0);
SPAlert existingAlert = null;
newAlert.Properties.Add("filterindex", "4");
newAlert.Properties.Add("viewid", list.Views["Weekly Alert"].ID.ToString("D"));
newAlert.Properties.Add("filterpath", string.Format("{0}/", list.Views["Weekly Alert"].ServerRelativeUrl.TrimStart('/')));
foreach (SPAlert alerts in user.Alerts)
string al = alerts.AlertFrequency.ToString();
// Filter down the alert to the list you wish to report on.
if (al == "Weekly")
// Found your existing your custom alert. Don't create one.
existingAlert = alerts;
if (existingAlert == null)
newAlert.Update(false);
This is my code. alerts are not sending based on the view:(

Hi sathyaav,
I followed the example and made a test in my environment, it works like a charm.
I suggest you check if you have inputed the valid site URL when you create the project solution.
If you deployed succeed in the Central Administrator Site using Visual Studio, then the job named "Simple Job Definition" will appear in the job definition list.
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

How to fill out the clipboard under "about:support" when enter button does not work in address bar? Thearrow button does not work either?

My enter btton does not work in the address bar or search engine. I have done the restart in safe mode...deleted and reinstalled firefox...done the malware/adware checks...still no improvement.
I was asked to do the "about:support" then click enter for the clipboard to paste the system notes into. That is not an option however because the orginal problem is the enter button not working. Ideas?

Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

SAP IDM 7.2 SP 8 - Escalate an Approval through Approval Mgmt is not working

Experts ,
We are running SAP IDM SP8 Patch 3 Version . Prior to this version Escalate or Decline Option through Approval Management Tab was working as intended . But , when we moved to this Patch Version we are getting issues on Escalation process or Decline Process .
System is not automatically adjusting MX_ESCALATION_APPROVER_1 -> MX_APPROVER Process . In our Scenario when we click on Escalate Button , System will Auto reject the Request ( Delete Pending Value) .
On Further Analysis we found that , System is routing to TIMEOUT Scenario for the Approval Task . Have any one seen this issue with this Patch level ?
Thanks ,
Jerry George

Hi Christina,
this is a very interesting issue. The Execution Log Error seems to me like the RT is not able to write the APPROVAL_OPERATION_RESULT to the pending value object. Does this attribute already exist in your store? If not, do you have the automatic creation of attribute enabled on your your identity store configuration?
I somehow remember that you have to enable this - either during the GRC initial load or during the first time you run the whole validation process.
I think this might help. Looking forward to receive your feedback.
Steffen

XBox 360/Audigy: SPDIF IN pass through to SPDIF OUT not working with 5.1

Hi,
I've a problem passing my digital dobly signal from my 360 over the Audigy soundblaster to my external decoder. I want to use digital SPDIF IN from the audigy?IO device to pass the signal directly without processing to the external decoder by using the SPDIF OUT.
There is only one digital in at the decoder, so I need this combination if I want my PC and XBox to be connected both without a toslink switch.
I activated the pass through and external decoder option in the audigy console application. I also disabled the DDL encoder. Additionally I set my Windows 7 speaker settings to use SPDIF OUT as standard device.
This is working for every dolby digital signal?from a dvd which I play on my PC, but not for the XBox signal. The signal is not recognized as a 5. dolby digital signal, but as a 2.0 signal. So something must happen with the signal in the audigy. The XBox settings are correct, because when I connect the toslink cable directly to the decoder everything works fine.
My drivers are the newest one (3.8)?from the support pack.
I don't want to use the DDL option, because the latency is much to high to allow regular playing!
Is there a possibility to pass the XBox signal through to my decoder by using the digital in and out of the audigy?
Thanks in advance,
Axel

Hi I have the same probleme, exept that I have succesfuly pluged my home theater receiver and the 5.1 works. Just my subwoofer seems not to work properly. Like when I plug it into a digital dvd player it works very nicely. but when pluged into the sound card it seems that it dosnt have any signal for it.
ANy clues??? I know i pluged everything finely I have tested the sound test for each speaker and sub to, from the receiver and from the creative software the sub seems to work but very quietly even if I cran the volume up on the sub or in the software , the sub dont work as it should.
1 thing I remarqued is that the sub works occasionaly in some movies. When listening to the music it not working and I dont understand that.

Scroll bar with flowlayout still does not work

Why does the scrollbar with my textArea not work?
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class JEmail extends JFrame implements ActionListener
     JPanel panel = new JPanel(new FlowLayout());
     private final static String newline = "\n";
     JButton button = new JButton("Send");
     JLabel to = new JLabel("TO:");
     JLabel from = new JLabel("From:");
     JTextField tobox = new JTextField(8);
     JTextField frombox = new JTextField(8);
     //     JTextArea email = new JTextArea(5,10);
          JLabel message = new JLabel("Message:");
     //     JScrollPane scroll = new JScrollPane(email);
          JTextArea textArea = new JTextArea(5,10);
          JScrollPane scroll = new JScrollPane(textArea);
     //JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
     //     JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
     public JEmail()
          super("Email");
          panel.setLayout(new FlowLayout());
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          panel.add(to);
          panel.add(tobox);
          panel.add(from);
          panel.add(frombox);
          panel.add(message);
          panel.add(textArea);
     panel.add(scroll);
          panel.add(button);
          button.addActionListener(this);
     //     email.addAdjustmentListener(this);
          setContentPane(panel);
     public void actionPerformed(ActionEvent e)
          Object source = e.getSource();
          if (source == button)
          textArea.append(newline + "Mail has been sent\n");
          tobox.setText("");
          frombox.setText("");
     public void adjustmentValueChanged(AdjustmentEvent e)
          Object source = e.getSource();
     public static void main(String[] args)
          JFrame aFrame = new JEmail();
          aFrame.setSize(400, 400);
          aFrame.setVisible(true);
}

Post the code again, this time using the [ code ] tags.

EXPORT/IMPORT through FMs in BADI not working

Hi Experts,
I have checked several posts and implemented my requirement but it's not working. PFB my requirement:
We have a BADI in which I need to EXPORT an itab and the same is to be IMPORTed into ZFM. I have created 2 FMs under same FG. Now, in the FM which is being called in BADI i have EXPORT and in ZFM i have IMPORT. Code is given below:
FM from BADI: ZBADI_FM
IF lv_flag EQ 'X'.
EXPORT gt_msg TO MEMORY ID 'CHANGED_DATES'.
ENDIF.
Another ZFM under same FG: ZFM
IMPORT gt_msg FROM MEMORY ID 'CHANGED_DATES'.
gt_msg is declared in TOP that is common for both FMs. However, IMPORT is not happening. I am not getting the values that I exported. sy-subrc is 4.
Can anyone help me out? Your help is appreciated.

Hi,
I can't believe that it will work:
EXPORT TO MEMORY
A data cluster in the ABAP memory is available to all programs within a call sequence, whereby data can be handed over to called programs.
call sequence
This sequence is created if you can return from the called program to the calling program at the call of an ABAP-Program with SUBMIT ... AND RETURN or CALL TRANSACTION. For this purpose, the data of the internal session of the caller remains on a stack. The programs of a call sequence have collective access to the ABAP Memory. A call sequence can be left completely using the statement LEAVE TO TRANSACTION.
Regards,
Klaus

Internet Connection through 90% of applications NOT working :(

So recently alot of my internet applications have stopped working. I use airport. My internet is connected to my computer and I know this because firefox, ventrilo, and video games such as warcraft 3 work using internet connection and my network preferences says that I have an IP and full bars. So the internet applications that don't work are safari, itunes store, my sophos updates, my software update (I am missing like 6 months worth of updates), etc. When I try to use the internet with these applications it will just say to check my internet connection or that I am not connected to the internet. I thought maybe it was a virus even though I have not known anyone I know that has a mac to ever have had a virus yet. So I went out and bought norton anti-virus and it scanned my computer and found zero viruses. So my question is, does anyone know what is wrong with my computer or how on earth I can fix it? I don't know how to wipe the harddrive so if that's what needs to be done please instruct me to a page that shows me how or just tell me. Also my macbook is about 4 years old and the version, I believe, is 10.5.6? Sorry, I'm not on my macbook right now so I'm not exactly sure as to the current version but it should be around there. Thanks in advance for any help you guys offer!

HI and Welcome to Apple Discussions..
Sorry to tell you this but Norton anti virus software can actualy damage a hard drive.
Read the second post here by: "Klaus"1
http://discussions.apple.com/thread.jspa?messageID=10399395&#10399395
There are no Mac viruses in the wild... it's not a virus.
Before you erase the hard disk and reinstall the Mac OS X, run Disk Utility from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If the hard disk appears to be ok and there's plenty of free disk space then do the Erase and Install, instructions here...
http://support.apple.com/kb/HT1544
Make sure and back up all important data BEFORE doing this.
If you are running Leopard, the most recent version is 10.5.8.
Carolyn
Message was edited by: Carolyn Samit

Search bar and net search does not work

I run mac os x mavericks
I updated recently to Firefox 29.0
for the last 2 days or so I can't search the net with google anymore If I type a frase or word (Flickr, VW beetle) into the searchbar and have google as search engin selected I get the error message "Firefox can't establish a connection to the server at www.google.com."
If I type into the address bar www.google.com same thing BUT if I type in www.google.co.za or .de or. uk it is fine.
Also all my old bookmarks are working fine.
However if I try to search with 'bing or yahoo FF askes to redirect and brings me to a malware flashplayer pro site with a windows uplication. I'm not able to ignore it!
Please help as i do not want to use google crome or safary as my default browser
Thanks in advance

It sounds like you have a third party program that has taken over your search engine, home page, and/or the default new tab page. Fortunately, this can be remedied easily:
# At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP), and then click Add-ons. The Add-ons Manager tab will open.
# In the Add-ons Manager tab, select the Extensions panel.
# Select the toolbar you wish to remove.
# Click the remove button.
# Click "Restart now" if it pops up. Your tabs will be saved and restored after the restart.
After Firefox restarts, install the [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Search Reset Tool]. This will remove the rest of the traces of this program from your Firefox.
For further information, please read [[Remove a toolbar that has taken over your Firefox search or home page]].
Did this fix the problem? Please let us know!

Enabling SSL through Net Manger is not working !!!!!!!

When configuring SSL in the "Oracle net manager"
1) Should the Service Name also be TCP/IP with SSL or just the Listener
Steps I followed:
1) Created a wallet in [READY] mode
2) configured *ora files through net manager
3) Restarted the listner
listener.ora:
===========
SSL_CLIENT_AUTHENTICATION = FALSE
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = C:\oracle\db\11g\11.1.0\db_2\admin\orcl\wallet)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCPS)(HOST = kcr-PC)(PORT = 2484))
TRACE_LEVEL_LISTENER = ADMIN
tnsname.ora:
===========
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = kcr-PC)(PORT = 1521)) // I have trried (PROTOCOL = TCPS) doesn't work
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
sqlnet.ora:
===========
SQLNET.AUTHENTICATION_SERVICES= (BEQ, TCPS, NTS)
SSL_VERSION = 0
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SSL_CLIENT_AUTHENTICATION = FALSE
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = C:\oracle\db\11g\11.1.0\db_2\admin\orcl\wallet)
SSL_CIPHER_SUITES= (SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA)
Log file output
listener.log
==========
Wed Sep 15 14:08:30 2010
15-SEP-2010 14:08:30 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=kcr-PC)(PORT=2484)))
Listener completed notification to CRS on stop
15-SEP-2010 14:08:32 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * stop * 0
Wed Sep 15 14:13:13 2010
System parameter file is C:\oracle\db\11g\11.1.0\db_2\network\admin\listener.ora
Log messages written to c:\oracle\db\11g\diag\tnslsnr\kcr-PC\listener\alert\log.xml
Trace information written to c:\oracle\db\11g\diag\tnslsnr\kcr-PC\listener\trace\ora_2192_3556.trc
Trace level is currently 6
Started with pid=2192
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=kcr-PC)(PORT=2484)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
15-SEP-2010 14:13:18 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
Wed Sep 15 14:13:30 2010
15-SEP-2010 14:13:30 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
Wed Sep 15 14:16:18 2010
15-SEP-2010 14:16:18 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
listener.log
==========
Wed Sep 15 14:08:30 2010
15-SEP-2010 14:08:30 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=kcr-PC)(PORT=2484)))
Listener completed notification to CRS on stop
15-SEP-2010 14:08:32 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * stop * 0
Wed Sep 15 14:13:13 2010
System parameter file is C:\oracle\db\11g\11.1.0\db_2\network\admin\listener.ora
Log messages written to c:\oracle\db\11g\diag\tnslsnr\kcr-PC\listener\alert\log.xml
Trace information written to c:\oracle\db\11g\diag\tnslsnr\kcr-PC\listener\trace\ora_2192_3556.trc
Trace level is currently 6
Started with pid=2192
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=kcr-PC)(PORT=2484)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
15-SEP-2010 14:13:18 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
Wed Sep 15 14:13:30 2010
15-SEP-2010 14:13:30 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
Wed Sep 15 14:16:18 2010
15-SEP-2010 14:16:18 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=kcr))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=185599744)) * status * 0
Trace log:
=========
Trace file c:\oracle\db\11g\diag\tnslsnr\kcr-PC\listener\trace\ora_2192_3556.trc
TNSLSNR for 32-bit Windows: Version 11.1.0.7.0 - Production on 15-SEP-2010 14:13:13
Copyright (c) 1991, 2008, Oracle. All rights reserved.
2010-09-15 14:13:13.706315 : --- TRACE CONFIGURATION INFORMATION FOLLOWS ---
2010-09-15 14:13:13.706426 : New trace stream is c:\oracle\db\11g\diag\tnslsnr\kcr-PC\listener\trace\ora_2192_3556.trc
2010-09-15 14:13:13.706493 : New trace level is 6
2010-09-15 14:13:13.706556 : --- TRACE CONFIGURATION INFORMATION ENDS ---
2010-09-15 14:13:13.706621 : --- PARAMETER SOURCE INFORMATION FOLLOWS ---
2010-09-15 14:13:13.706767 : Attempted load of system pfile source C:\oracle\db\11g\11.1.0\db_2\network\admin\listener.ora
2010-09-15 14:13:13.706822 : Parameter source loaded successfully
2010-09-15 14:13:13.706869 :
2010-09-15 14:13:13.706914 : Attempted load of command line source
2010-09-15 14:13:13.706961 : Parameter source was not loaded
2010-09-15 14:13:13.707006 :
2010-09-15 14:13:13.707051 : -> PARAMETER TABLE LOAD RESULTS FOLLOW <-
2010-09-15 14:13:13.707098 : Successful parameter table load
2010-09-15 14:13:13.707148 : -> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
2010-09-15 14:13:13.707198 : LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = kcr-PC)(PORT = 2484))))
2010-09-15 14:13:13.707250 : SSL_CLIENT_AUTHENTICATION = FALSE
2010-09-15 14:13:13.707297 : TRACE_LEVEL_LISTENER = ADMIN
2010-09-15 14:13:13.707344 : WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\oracle\db\11g\11.1.0\db_2\admin\orcl\wallet)))
2010-09-15 14:13:13.707394 : --- PARAMETER SOURCE INFORMATION ENDS ---
2010-09-15 14:13:13.707447 : --- LOG CONFIGURATION INFORMATION FOLLOWS ---
2010-09-15 14:13:13.707520 : Log stream will be "c:\oracle\db\11g\diag\tnslsnr\kcr-PC\listener\alert\log.xml"
2010-09-15 14:13:13.707570 : Log stream validation not requested
2010-09-15 14:13:13.707617 : --- LOG CONFIGURATION INFORMATION ENDS ---
2010-09-15 14:13:13.707672 : nlstdipi:entry
2010-09-15 14:13:13.708416 : nlstdipi:exit
2010-09-15 14:13:13.713189 : nsglldprm:Resolved "INBOUND_CONNECT_TIMEOUT_LISTENER" to: 60
2010-09-15 14:13:13.713270 : nsglldprm:Resolved "STARTUP_WAIT_TIME_LISTENER" to: 0
2010-09-15 14:13:13.713356 : nsglldprm:LocalOSauth enabled
2010-09-15 14:13:13.713407 : nsglldprm:No Default Service Configured for LISTENER
2010-09-15 14:13:13.714149 : nsinherit:doing connect handshake...
2010-09-15 14:13:13.714227 : nsinh_hoff:ADR="(ADDRESS=(PROTOCOL=beq))"
2010-09-15 14:13:13.714282 : nsc2addr:(ADDRESS=(PROTOCOL=beq))
2010-09-15 14:13:13.715334 : nlpcaini:entry
2010-09-15 14:13:13.715415 : nlpcaini:No process parameters set
2010-09-15 14:13:13.715468 : nlpcaini:exit
2010-09-15 14:13:13.715522 : nsinh_hoff:inheriting the connection...
2010-09-15 14:13:13.715601 : nsmal:996 bytes at 0x1e048e0
2010-09-15 14:13:13.715667 : nsmal:2096 bytes at 0x1e04cd0
2010-09-15 14:13:13.715737 : nsmal:84 bytes at 0x1e05640
2010-09-15 14:13:13.715902 : nsopen:opening transport...
2010-09-15 14:13:13.715938 : ntpcon:entry
2010-09-15 14:13:13.715966 : ntpcon:toc = 6
2010-09-15 14:13:13.715992 : ntpcon:exit
2010-09-15 14:13:13.716018 : ntpcon:entry
2010-09-15 14:13:13.716044 : ntpcon:toc = 4
2010-09-15 14:13:13.716075 : sntpinherit:entry
2010-09-15 14:13:13.716176 : sntpinherit:Attempting to make pipe \\.\PIPE\ORANTP890.DE4.w
2010-09-15 14:13:13.716245 : sntpinherit:Listening on pipe \\.\PIPE\ORANTP890.DE4.w
2010-09-15 14:13:13.716277 : sntpinherit:Attempting to make pipe \\.\PIPE\ORANTP890.DE4
2010-09-15 14:13:13.716328 : sntpinherit:Listening on pipe \\.\PIPE\ORANTP890.DE4
2010-09-15 14:13:15.633322 : sntpinherit:Successfully established pipe 508 to parent.
2010-09-15 14:13:15.633435 : sntpinherit:Successfully established pipe 504 to parent.
2010-09-15 14:13:15.633476 : sntpinherit:exit
2010-09-15 14:13:15.633508 : ntpcon:NT layer IPC connection has been established.
2010-09-15 14:13:15.633645 : ntpcon:exit
2010-09-15 14:13:15.633683 : nsopen:transport is open
2010-09-15 14:13:15.633719 : nsoptions:lcl[0]=0x0, lcl[1]=0x0, gbl[0]=0x0, gbl[1]=0x0, cha=0x0
2010-09-15 14:13:15.633752 : nsoptions:lcl[0]=0xf4ffefff, lcl[1]=0x0, gbl[0]=0x78bf, gbl[1]=0x0
2010-09-15 14:13:15.633799 : nsnainit:inherit
2010-09-15 14:13:15.633834 : nsnasvnainfo:NA disabled for this connection
2010-09-15 14:13:15.633872 : nainit:entry
2010-09-15 14:13:15.633910 : nagblini:entry
2010-09-15 14:13:15.633953 : nau_gin:entry
2010-09-15 14:13:15.633987 : nau_gparams:entry
2010-09-15 14:13:15.634020 : nam_gbp:Reading parameter "sqlnet.authentication_required" from parameter file
2010-09-15 14:13:15.634053 : nam_gbp:Parameter not found
2010-09-15 14:13:15.634084 : nau_gparams:Using default value "FALSE"
2010-09-15 14:13:15.634115 : nau_gslf:entry
2010-09-15 14:13:15.634145 : nam_gic:entry
2010-09-15 14:13:15.634174 : nam_gic:Counting # of items in "sqlnet.authentication_services" parameter
2010-09-15 14:13:15.634208 : nam_gic:Parameter not found
2010-09-15 14:13:15.634236 : nam_gic:Found 0 items
2010-09-15 14:13:15.634263 : nam_gic:exit
2010-09-15 14:13:15.634290 : nau_gslf:Using default value "all available adapters"
2010-09-15 14:13:15.634321 : nauss_set_state:entry
2010-09-15 14:13:15.634348 : nauss_set_state:exit
2010-09-15 14:13:15.634377 : nau_gslf:exit
2010-09-15 14:13:15.634404 : nau_gparams:exit
2010-09-15 14:13:15.634430 : nau_gin:exit
2010-09-15 14:13:15.634457 : nagblini:exit
2010-09-15 14:13:15.634489 : na_saveprot:entry
2010-09-15 14:13:15.634518 : na_saveprot:exit
2010-09-15 14:13:15.634549 : nacomin:entry
2010-09-15 14:13:15.634582 : nas_init:entry
2010-09-15 14:13:15.634611 : nas_init:exit
2010-09-15 14:13:15.634645 : nau_ini:entry
2010-09-15 14:13:15.634674 : naugcp_get_connect_parameters:entry
2010-09-15 14:13:15.634702 : nauss_set_state:entry
2010-09-15 14:13:15.634728 : nauss_set_state:exit
2010-09-15 14:13:15.634755 : naugcp_get_connect_parameters:exit
2010-09-15 14:13:15.634785 : nau_gettab:entry
2010-09-15 14:13:15.634840 : nau_gettab:exit
2010-09-15 14:13:15.634868 : nau_sini:entry
2010-09-15 14:13:15.634895 : nau_sini:exit
2010-09-15 14:13:15.634927 : nau_ini:exit
2010-09-15 14:13:15.634959 : naeeinit:entry
2010-09-15 14:13:15.634992 : nam_gbp:Reading parameter "SQLNET.FIPS_140" from parameter file
2010-09-15 14:13:15.635022 : nam_gbp:Parameter not found
2010-09-15 14:13:15.635055 : nam_gnsp:Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
2010-09-15 14:13:15.635088 : nam_gnsp:Parameter not found
2010-09-15 14:13:15.635119 : naequad:Using default value "ACCEPTED"
2010-09-15 14:13:15.635147 : nam_gic:entry
2010-09-15 14:13:15.635174 : nam_gic:Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
2010-09-15 14:13:15.635205 : nam_gic:Parameter not found
2010-09-15 14:13:15.635232 : nam_gic:exit
2010-09-15 14:13:15.635259 : naesno:Using default value "all available algorithms"
2010-09-15 14:13:15.635290 : naeshow:entry
2010-09-15 14:13:15.635409 : naeshow:exit
2010-09-15 14:13:15.635439 : naeeinit:exit
2010-09-15 14:13:15.635469 : naecinit:entry
2010-09-15 14:13:15.635498 : nam_gnsp:Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
2010-09-15 14:13:15.635530 : nam_gnsp:Parameter not found
2010-09-15 14:13:15.635557 : naequad:Using default value "ACCEPTED"
2010-09-15 14:13:15.635584 : nam_gic:entry
2010-09-15 14:13:15.635611 : nam_gic:Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
2010-09-15 14:13:15.635643 : nam_gic:Parameter not found
2010-09-15 14:13:15.635669 : nam_gic:exit
2010-09-15 14:13:15.635696 : naesno:Using default value "all available algorithms"
2010-09-15 14:13:15.635724 : naeshow:entry
2010-09-15 14:13:15.635750 : naeshow:exit
2010-09-15 14:13:15.635776 : naecinit:exit
2010-09-15 14:13:15.635868 : nadisc:entry
2010-09-15 14:13:15.635903 : nacomtm:entry
2010-09-15 14:13:15.635932 : nacompd:entry
2010-09-15 14:13:15.635959 : nacompd:exit
2010-09-15 14:13:15.635985 : nacompd:entry
2010-09-15 14:13:15.636074 : nacompd:exit
2010-09-15 14:13:15.636103 : nacomtm:exit
2010-09-15 14:13:15.636134 : nas_dis:entry
2010-09-15 14:13:15.636161 : nas_dis:exit
2010-09-15 14:13:15.636193 : nau_dis:entry
2010-09-15 14:13:15.636222 : nau_dis:exit
2010-09-15 14:13:15.636251 : naeetrm:entry
2010-09-15 14:13:15.636278 : naeetrm:exit
2010-09-15 14:13:15.636307 : naectrm:entry
2010-09-15 14:13:15.636336 : naectrm:exit
2010-09-15 14:13:15.636365 : nagbltrm:entry
2010-09-15 14:13:15.636397 : nau_gtm:entry
2010-09-15 14:13:15.636423 : nau_gtm:exit
2010-09-15 14:13:15.636450 : nagbltrm:exit
2010-09-15 14:13:15.636477 : nadisc:exit
2010-09-15 14:13:15.636503 : nainit:exit
2010-09-15 14:13:15.636531 : nsnainit:NS Connection version: 314
2010-09-15 14:13:15.636565 : nsnainit:inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
2010-09-15 14:13:15.636601 : nsnainit:"or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
2010-09-15 14:13:15.636643 : nsnainit:"or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
"and" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
2010-09-15 14:13:15.636697 : nsopen:global context check-in (to slot 0) complete
2010-09-15 14:13:15.636732 : nsopen:lcl[0]=0xf4ffefff, lcl[1]=0x0, gbl[0]=0x78bf, gbl[1]=0x0, tdu=4096, sdu=8192
2010-09-15 14:13:15.636773 : nsfull_opn:cid=0, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x0
2010-09-15 14:13:15.636805 : nsfull_opn:nsctx: state=7, flg=0x4000, mvd=0
2010-09-15 14:13:15.636841 : nsmal:84 bytes at 0x1e07da8
2010-09-15 14:13:15.636892 : nsmal:84 bytes at 0x1e09e28
2010-09-15 14:13:15.636948 : nsdo:cid=0, opcode=68, bl=0, what=8, uflgs=0x0, cflgs=0x3
2010-09-15 14:13:15.636983 : nsdo:rank=64, nsctxrnk=0
2010-09-15 14:13:15.637012 : nsdo:nsctx: state=14, flg=0x4004, mvd=0
2010-09-15 14:13:15.637044 : nsdo:gtn=10, gtc=10, ptn=10, ptc=8155
2010-09-15 14:13:15.637078 : nscon:doing connect handshake...
2010-09-15 14:13:15.637110 : nscon:recving a packet
2010-09-15 14:13:15.637144 : nsprecv:reading from transport...
2010-09-15 14:13:15.637174 : ntprd:entry
2010-09-15 14:13:15.637201 : sntpread:entry
2010-09-15 14:13:15.637229 : sntpread:Attempting to read 8208 bytes from handle 508
2010-09-15 14:13:15.637266 : sntpread:ReadFile returned 152 bytes
2010-09-15 14:13:15.637295 : sntpread:rc = 0, ntresnt[0] = 0
2010-09-15 14:13:15.637322 : sntpread:exit
2010-09-15 14:13:15.637349 : ntprd:exit
2010-09-15 14:13:15.637380 : nsprecv:152 bytes from transport
2010-09-15 14:13:15.637411 : nsprecv:tlen=152, plen=152, type=1
2010-09-15 14:13:15.637443 : nscon:got NSPTCN packet
2010-09-15 14:13:15.637481 : nsconneg:vsn=314, lov=300, opt=0x0, sdu=8192, tdu=4096, ntc=0x20e
2010-09-15 14:13:15.637513 : nsconneg:vsn=314, gbl=0x0, sdu=8192, tdu=4096
2010-09-15 14:13:15.637547 : nsmal:94 bytes at 0x1e0bea8
2010-09-15 14:13:15.637580 : nscon:got 94 bytes connect data
2010-09-15 14:13:15.637612 : nsmfr:94 bytes at 0x1e0bea8
2010-09-15 14:13:15.637644 : nscon:discarding connect data (94 bytes)
2010-09-15 14:13:15.637676 : nsdo:nsctxrnk=0
2010-09-15 14:13:15.637708 : nsinh_hoff:connection inherited
2010-09-15 14:13:15.637739 : nsinherit:connected
2010-09-15 14:13:15.637782 : nsglma:entry
2010-09-15 14:13:15.638886 : nsglma:Listener's pid=2192
2010-09-15 14:13:15.639072 : nladini:entry
2010-09-15 14:13:15.639125 : nladini:exit
2010-09-15 14:13:15.639152 : nladget:entry
2010-09-15 14:13:15.639197 : nladget:exit
2010-09-15 14:13:15.639234 : nsgllsn:LSNDSC==>(DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
2010-09-15 14:13:15.639270 : nsglhcrt:entry
2010-09-15 14:13:15.642067 : nsglhcrt:exit
2010-09-15 14:13:15.642174 : nsglbgetRSPidx:entry
2010-09-15 14:13:15.642222 : nladini:entry
2010-09-15 14:13:15.642259 : nladini:exit
2010-09-15 14:13:15.642286 : nladget:entry
2010-09-15 14:13:15.642332 : nladget:exit
2010-09-15 14:13:15.642363 : nsglbn2i:entry
2010-09-15 14:13:15.642392 : nsglbn2i:exit
2010-09-15 14:13:15.642435 : nladtrm:entry
2010-09-15 14:13:15.642465 : nladtrm:exit
2010-09-15 14:13:15.642493 : nsglbgetRSPidx:returning ecode=0
2010-09-15 14:13:15.642520 : nsglbgetRSPidx:exit
2010-09-15 14:13:15.642593 : nsc2addr:(DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
2010-09-15 14:13:15.643490 : ntnbnd2ddr:entry
2010-09-15 14:13:15.643547 : ntnbnd2ddr:exit
2010-09-15 14:13:15.643584 : nsmal:996 bytes at 0x1e0d428
2010-09-15 14:13:15.643622 : nsmal:2096 bytes at 0x1e0d818
2010-09-15 14:13:15.643660 : nsmal:84 bytes at 0x1e0e188
2010-09-15 14:13:15.643728 : nsopen:opening transport...
2010-09-15 14:13:15.643762 : ntnlsn:entry
2010-09-15 14:13:15.643810 : ntnlsn:creating pipe \\.\pipe\EXTPROC1521ipc
2010-09-15 14:13:15.643899 : ntnlsn:listening on pipe 532
2010-09-15 14:13:15.643930 : nsopen:transport is open
2010-09-15 14:13:15.643961 : nsoptions:lcl[0]=0x0, lcl[1]=0x12003, gbl[0]=0x0, gbl[1]=0x2001, cha=0x0
2010-09-15 14:13:15.643994 : nsoptions:lcl[0]=0xf4ffefff, lcl[1]=0x12003, gbl[0]=0x78bf, gbl[1]=0x2001
2010-09-15 14:13:15.644034 : nsopen:global context check-in (to slot 1) complete
2010-09-15 14:13:15.644067 : nsopen:lcl[0]=0xf4ffefff, lcl[1]=0x12003, gbl[0]=0x78bf, gbl[1]=0x2001, tdu=32767, sdu=8192
2010-09-15 14:13:15.644101 : nsfull_opn:cid=1, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x0
2010-09-15 14:13:15.644132 : nsfull_opn:nsctx: state=7, flg=0x4002, mvd=0
2010-09-15 14:13:15.644162 : nsmal:84 bytes at 0x1e108e8
2010-09-15 14:13:15.644215 : nsgllsn:completing partial addr: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
2010-09-15 14:13:15.645109 : nsgllsn:Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
2010-09-15 14:13:15.645216 : nsevreg:begin registration process for 1
2010-09-15 14:13:15.645259 : nsevreg:sgt=0, evn=4, evt[2]=0x0
2010-09-15 14:13:15.645290 : nsevreg:begin notification process for 1
2010-09-15 14:13:15.645331 : nsrah:setting transport read mode (2)
2010-09-15 14:13:15.645375 : ntnrd:failed to read 8155 bytes
2010-09-15 14:13:15.645407 : sntn2err:entry
2010-09-15 14:13:15.645438 : sntn2err:error: handle=532, op=5, nt[0]=524, nt[1]=997
2010-09-15 14:13:15.645467 : sntn2err:exit
2010-09-15 14:13:15.645502 : nsmal:84 bytes at 0x1e12af8
2010-09-15 14:13:15.645556 : ntnrd:failed to read 8155 bytes
2010-09-15 14:13:15.645585 : sntn2err:entry
2010-09-15 14:13:15.645612 : sntn2err:error: handle=532, op=5, nt[0]=524, nt[1]=997
2010-09-15 14:13:15.645640 : sntn2err:exit
2010-09-15 14:13:15.645670 : nsmal:84 bytes at 0x1e14cb0
2010-09-15 14:13:15.645712 : ntnrd:failed to read 8155 bytes
2010-09-15 14:13:15.645740 : sntn2err:entry
2010-09-15 14:13:15.645767 : sntn2err:error: handle=532, op=5, nt[0]=524, nt[1]=997
2010-09-15 14:13:15.645795 : sntn2err:exit
2010-09-15 14:13:15.645830 : nsmal:84 bytes at 0x1e16e68
2010-09-15 14:13:15.645874 : ntnrd:failed to read 8155 bytes
2010-09-15 14:13:15.645903 : sntn2err:entry
2010-09-15 14:13:15.645931 : sntn2err:error: handle=532, op=5, nt[0]=524, nt[1]=997
2010-09-15 14:13:15.645958 : sntn2err:exit
2010-09-15 14:13:15.645989 : nsevreg:rdm=2, sgt=0, evt[0]=0x1, [1]=0x1, [2]=0x0, nrg=0
2010-09-15 14:13:15.646018 : nsevreg:registering for 0x1
2010-09-15 14:13:15.646068 : nsglhins:entry
2010-09-15 14:13:15.646099 : nsglhins:exit
2010-09-15 14:13:15.646180 : nsc2addr:(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PARTIAL=yes)(QUEUESIZE=1))
2010-09-15 14:13:15.646440 : nttbnd2addr:entry
2010-09-15 14:13:15.646487 : snlinGetAddrInfo:entry
2010-09-15 14:13:15.646621 : snlinGetAddrInfo:exit
2010-09-15 14:13:15.646653 : nttbnd2addr:using host IP address: 127.0.0.1
2010-09-15 14:13:15.646686 : snlinFreeAddrInfo:entry
2010-09-15 14:13:15.646714 : snlinFreeAddrInfo:exit
2010-09-15 14:13:15.646832 : nttbnd2addr:exit
2010-09-15 14:13:15.646868 : nsmal:996 bytes at 0x1e19010
2010-09-15 14:13:15.646900 : nsmal:2096 bytes at 0x1e19400
2010-09-15 14:13:15.646932 : nsmal:84 bytes at 0x1e19d70
2010-09-15 14:13:15.646984 : nttcon:entry
2010-09-15 14:13:15.647013 : nttcon:toc = 6
2010-09-15 14:13:15.647052 : nttcnp:entry
2010-09-15 14:13:15.647080 : nttcnp:exit
2010-09-15 14:13:15.647117 : nttcon:exit
2010-09-15 14:13:15.647147 : nsopen:opening transport...
2010-09-15 14:13:15.647175 : nttcon:entry
2010-09-15 14:13:15.647201 : nttcon:toc = 2
2010-09-15 14:13:15.647229 : nttcnp:entry
2010-09-15 14:13:15.647259 : ntvlin:entry
2010-09-15 14:13:15.647291 : ntvllt:entry
2010-09-15 14:13:15.647323 : ntvllt:tcp.validnode_checking not turned on
2010-09-15 14:13:15.647351 : ntvllt:exit
2010-09-15 14:13:15.647377 : ntvlin:exit
2010-09-15 14:13:15.647404 : nttcnp:Validnode Table IN use; err 0x0
2010-09-15 14:13:15.648365 : nttcnp:getting sockname
2010-09-15 14:13:15.648422 : nttcnp:getting peername
2010-09-15 14:13:15.648452 : nttcnp:exit
2010-09-15 14:13:15.648488 : nttcon:exit
2010-09-15 14:13:15.648517 : nsopen:transport is open
2010-09-15 14:13:15.648548 : nsoptions:lcl[0]=0x0, lcl[1]=0x10003, gbl[0]=0x0, gbl[1]=0x2001, cha=0x0
2010-09-15 14:13:15.648581 : nsoptions:lcl[0]=0xf4ffefff, lcl[1]=0x10003, gbl[0]=0x7abf, gbl[1]=0x2001
2010-09-15 14:13:15.648616 : nsopen:global context check-in (to slot 2) complete
2010-09-15 14:13:15.648648 : nsopen:lcl[0]=0xf4ffefff, lcl[1]=0x10003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
2010-09-15 14:13:15.648682 : nsfull_opn:cid=2, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x0
2010-09-15 14:13:15.648713 : nsfull_opn:nsctx: state=7, flg=0x4002, mvd=0
2010-09-15 14:13:15.648746 : nsmal:84 bytes at 0x1e1c688
2010-09-15 14:13:15.648815 : nladget:entry
2010-09-15 14:13:15.648868 : nladget:exit
2010-09-15 14:13:15.648903 : nsgllsn:LSNDSC==>(DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=kcr-PC)(PORT=2484)))
2010-09-15 14:13:15.649018 : nsglhcrt:entry
2010-09-15 14:13:15.649230 : nsglhcrt:exit
2010-09-15 14:13:15.649265 : nsglbgetRSPidx:entry
2010-09-15 14:13:15.649293 : nladini:entry
2010-09-15 14:13:15.649328 : nladini:exit
2010-09-15 14:13:15.649354 : nladget:entry
2010-09-15 14:13:15.649401 : nladget:exit
2010-09-15 14:13:15.649428 : nsglbn2i:entry
2010-09-15 14:13:15.649456 : nsglbn2i:exit
2010-09-15 14:13:15.649500 : nladtrm:entry
2010-09-15 14:13:15.649531 : nladtrm:exit
2010-09-15 14:13:15.649559 : nsglbgetRSPidx:returning ecode=0
2010-09-15 14:13:15.649586 : nsglbgetRSPidx:exit
2010-09-15 14:13:15.649654 : nsc2addr:(DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=kcr-PC)(PORT=2484)))
2010-09-15 14:13:15.650926 : ntzini:entry
2010-09-15 14:13:15.650997 : ntzSetupConnection:entry
2010-09-15 14:13:15.651039 : ntzgbhapip:entry
2010-09-15 14:13:15.651072 : ntzgbhapip:no value for bhapi parameter specified - using default value: "TRUE"
2010-09-15 14:13:15.651101 : ntzgbhapip:exit
2010-09-15 14:13:15.657818 : ntzSetupConnection:exit
2010-09-15 14:13:15.657905 : ntzSetupConnection:entry
2010-09-15 14:13:15.657936 : ntzgbhapip:entry
2010-09-15 14:13:15.657968 : ntzgbhapip:no value for bhapi parameter specified - using default value: "TRUE"
2010-09-15 14:13:15.657998 : ntzgbhapip:exit
2010-09-15 14:13:15.663017 : ntzSetupConnection:exit
2010-09-15 14:13:15.663075 : ntzcsgtab:entry
2010-09-15 14:13:15.663110 : ntzcsgtab:exit
2010-09-15 14:13:15.663137 : ntzini:exit
2010-09-15 14:13:15.663166 : nttbnd2addr:entry
2010-09-15 14:13:15.663197 : snlinGetAddrInfo:entry
2010-09-15 14:13:15.663240 : snlinGetAddrInfo:getaddrinfo() failed with error 11001
2010-09-15 14:13:15.663269 : snlinGetAddrInfo:exit
2010-09-15 14:13:15.663297 : nttbnd2addr:looking up IP addr for host: kcr-PC
2010-09-15 14:13:15.663324 : snlinGetAddrInfo:entry
2010-09-15 14:13:15.664291 : snlinGetAddrInfo:exit
2010-09-15 14:13:15.664336 : snlinFreeAddrInfo:entry
2010-09-15 14:13:15.664365 : snlinFreeAddrInfo:exit
2010-09-15 14:13:15.664392 : nttbnd2addr:exit
2010-09-15 14:13:15.664445 : nsmal:996 bytes at 0x1e48d18
2010-09-15 14:13:15.664479 : nsmal:2096 bytes at 0x1e49108
2010-09-15 14:13:15.664533 : nsmal:84 bytes at 0x1e49a90
2010-09-15 14:13:15.664583 : ntzconnect:entry
2010-09-15 14:13:15.664612 : nttcon:entry
2010-09-15 14:13:15.664640 : nttcon:toc = 6
2010-09-15 14:13:15.664676 : nttcnp:entry
2010-09-15 14:13:15.664703 : nttcnp:exit
2010-09-15 14:13:15.664734 : nttcon:exit
2010-09-15 14:13:15.664761 : ntzconnect:underlying transport adapter failed.
2010-09-15 14:13:15.664794 : ntzconnect:failed with error 551
2010-09-15 14:13:15.664849 : ntzconnect:exit
2010-09-15 14:13:15.664879 : nsopen:opening transport...
2010-09-15 14:13:15.664908 : ntzconnect:entry
2010-09-15 14:13:15.664934 : nttcon:entry
2010-09-15 14:13:15.664960 : nttcon:toc = 2
2010-09-15 14:13:15.664988 : nttcnp:entry
2010-09-15 14:13:15.665015 : ntvlin:entry
2010-09-15 14:13:15.665042 : ntvllt:entry
2010-09-15 14:13:15.665074 : ntvllt:tcp.validnode_checking not turned on
2010-09-15 14:13:15.665102 : ntvllt:exit
2010-09-15 14:13:15.665128 : ntvlin:exit
2010-09-15 14:13:15.665155 : nttcnp:Validnode Table IN use; err 0x0
2010-09-15 14:13:15.665380 : snlinGetAddrInfo:entry
2010-09-15 14:13:15.666066 : snlinGetAddrInfo:exit
2010-09-15 14:13:15.666106 : snlinFreeAddrInfo:entry
2010-09-15 14:13:15.666134 : snlinFreeAddrInfo:exit
2010-09-15 14:13:15.666213 : nttcnp:getting sockname
2010-09-15 14:13:15.666245 : nttcnp:getting peername
2010-09-15 14:13:15.666273 : nttcnp:exit
2010-09-15 14:13:15.666417 : snlinGetAddrInfo:entry
2010-09-15 14:13:15.666901 : snlinGetAddrInfo:exit
2010-09-15 14:13:15.666939 : snlinFreeAddrInfo:entry
2010-09-15 14:13:15.666966 : snlinFreeAddrInfo:exit
2010-09-15 14:13:15.666994 : nttcon:exit
2010-09-15 14:13:15.667022 : ntzAllocate:entry
2010-09-15 14:13:15.667050 : ntzAllocate:allocating 168 bytes of memory.
2010-09-15 14:13:15.667079 : ntzAllocate:exit
2010-09-15 14:13:15.667105 : ntzconnect:exit
2010-09-15 14:13:15.667134 : nsopen:transport is open
2010-09-15 14:13:15.667164 : nsoptions:lcl[0]=0x0, lcl[1]=0x12003, gbl[0]=0x0, gbl[1]=0x2001, cha=0x0
2010-09-15 14:13:15.667198 : nsoptions:lcl[0]=0xf4ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001
2010-09-15 14:13:15.667233 : nsopen:global context check-in (to slot 3) complete
2010-09-15 14:13:15.667265 : nsopen:lcl[0]=0xf4ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
2010-09-15 14:13:15.667300 : nsfull_opn:cid=3, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x0
2010-09-15 14:13:15.667330 : nsfull_opn:nsctx: state=7, flg=0x4002, mvd=0
2010-09-15 14:13:15.667361 : nsmal:84 bytes at 0x1e49af0
2010-09-15 14:13:15.667419 : nsgllsn:completing partial addr: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=kcr-PC)(PORT=2484)))
2010-09-15 14:13:15.667462 : nttaddr2bnd:entry
2010-09-15 14:13:15.667604 : snlinGetAddrInfo:entry
2010-09-15 14:13:15.668269 : snlinGetAddrInfo:exit
2010-09-15 14:13:15.668305 : snlinFreeAddrInfo:entry
2010-09-15 14:13:15.668333 : snlinFreeAddrInfo:exit
2010-09-15 14:13:15.668367 : nttaddr2bnd:exit
2010-09-15 14:13:15.669099 : nsgllsn:Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=kcr-PC)(PORT=2484)))
2010-09-15 14:13:15.669141 : nsevreg:begin registration process for 3
2010-09-15 14:13:15.669174 : nsevreg:sgt=0, evn=1, evt[2]=0x0
2010-09-15 14:13:15.669203 : nsevreg:begin notification process for 3
2010-09-15 14:13:15.669234 : nsevreg:rdm=0, sgt=0, evt[0]=0x1, [1]=0x1, [2]=0x0, nrg=0
2010-09-15 14:13:15.669263 : nsevre

Thanks for your reply.
Little more research I found that auto login needs to be enabled. I am still working on resolving this issue, I have spent over 12 hrs to resolve this issue. I will post with my troubleshooting results. Please advise.
Thanks,
/SR

Back To My Mac to a Time Capsule through a 3Com Router not working

I have a Mac Book Pro (10.5.7), Time Capsule (7.4.1), 3Com Office Connect Wireless Router (3CRWDR101A-75), a trial subscription to Mobile Me and a 2.5G iPhone (2.2.1).
I have been unable to get BTTM from my Mac on a remote wireless connection to my Time Capsule working - hence this post.
The set up of the Time Capsule was quite straightforward (as I would have expected from Apple) and I quickly established local and remote iCal / Address Book sync between my Mac, www.me.com and my iPhone. I have enabled and am the 2.4 and 5GHz bands on the Time Capsule and the wireless air interface on the 3Com router has been turned off. All of internet and email services on my Mac work well locally and Time Machine work. So far so good.
However, I am unable to 'see' my Time Capsule in Finder from any WiFi network that is not my home network. When at home I have full access to Time Capsule's disk.
My 3Com Office Router 3CRWDR101A-75 is not on the list of supported routers (nor is any other 3Com Router) but it does provide UPnP and NAT as required according to Mobile Sync notes including http://support.apple.com/kb/HT1552 and http://support.apple.com/kb/HT1552. Despite my best efforts, I have been unable to find out from Apple's MobileMe support if there are any minimum requirements for any router to work with Back To My Mac so can't check to see if my 3Com router will ever work with BTTM or not.
Does anyone have any similar experience with setting up a 3Com Office Connect router to work with Back to My Mac?
Do I need to check / Can I check if my Time Capsule has been registered with the Mobile Me servers?
Do I need to enable any specific ports on my 3Com Office Connect router?
Basic settings:
Time Capsule: green light - all OK
AirPort Utility>Internet: Connection Sharing: Off (Bridge Mode)
AirPort Utility>Advanced>Mobile me: account set up
AirPort Utility>Advanced>IPv6: IPv6 mode = Node, at the request of Apple Mobile Me support
System Preferences>Mobile Me>BackToMy Mac: On (green light).
3Com Office Connect Router: DCHP server: On
3Com Office Connect Router: Firewall level: High (default)
3Com Office Connect Router: Disable NAT: Off (default)
3Com Office Connect Router: Enable Universal Plug & Play: On
3Com Office Connect Router: Enable IPSEC-NAT pass through: ON, at the request of Apple Mobile me support
Com Office Connect Router: DMZ: enable 1-to-1 NAT: Off (default)
Any ideas?
Thanks.

Quick update on troubleshooting BTTM (or rather Back To My Time Capsule)...
Surprising;y, no 3Com products listed in http://support.apple.com/kb/TS1304. 3Com tech support stated that no OfficeConnect products have been qualified against BTTM and my specific router does not support IPv6 over IPv4 encapsulation.
MobileMe support were not able to help, citing the fact that I had an unsupported router.
I have made no change to my modem/router config since first posted but since an upgrade of my TC to 7.4.2 I have been able to use BTTM with my TC (bridge mode) and my OfficeConnect modem/router (802.11b WiFi disabled).
I have made limited testing from other remote locations from my MBP and also proved that it worked over a 3G/UMTS connection on the UK's 02 network also
MobileMe still reporting uPnP / NAT problem on my MBP when working remotely though.
http://discussions.apple.com/message.jspa?messageID=9733258 confirms that this has been solved and, apart from the anomalous Mobileme status message, I can agree.
Good news so now do not need to swap out my 3Com router. Also shows that this 3Com product does meet BTTM connectivity requirements.
Message was edited by: Elise49
Message was edited by: Elise49

I have white and grey line on my ipad it not working please help

my daughter was using her Ipad and it stop working white and grey line are on it now and she cannot use it at all please help

Try resetting the device. Hold down the sleep and home buttons, past when you see the red power down slider and until you see the silver apple. Let it reboot and see if that helps.
If not and if it's still under warranty you may want to make an appointment at your local apple store and have them take a look at it.

Grey bar through QT thunbnail, QT not working in ProApps!

Similar Messages

Maybe you are looking for