Grey color cover the screen and can't use touch screen when trying to open the internet.

Pleas help, yesterday when I tried to open an website on my I pad 2 and there was a grey color cover the screen and I can't use touch screen, i still can see the internet is working in the back ground of the screen and the webpage was opend but I just can't make the grey color screen disappear. Thanks million.

Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reset the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Last thing to try is quit the app and restart the iPad. Go to the home screen first by tapping the home button. Quit Safari by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the Safari icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please

I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.

This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene

After upgrading the itunes, I can not find my ipad when it connects to the PC

After upgrading the itunes, I can not find my ipad when it connects to the PC
Before that, I can see an botton said my ipad. And then I can click it to operate my ipad

Try this
Go into the control panel. Add/remove programs. Uninstall iTunes, Apple mobile device service, apple application support. Then go out and redownload and reinstall iTunes and try again.
There seems to be a glitch with a recent update and one way to overcome it is to just start over. If that doesn't work there are more in depth things you can do.

I can't use Yahoo messenger (it doesn't open the dialogue window), but in other PCs with older versions of Firefox I don't have problems

I can't use Yahoo messenger (it doesn't open the dialogue window), but in other PCs with older versions of Firefox I don't have problems
As stated earlier even though when I have an incoming message I hear the "Beep" Firefox does not open the dialogue window as it used to do.
Also I am not able to open a new dialogue window or tab by clicking on an online contact of mine.

Known issue, See:
* https://bugzilla.mozilla.org/show_bug.cgi?id=713014
this issue maybe fixed in beta/ nightly, you should try it
* firefox.com/beta

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand

Itunes crashes when trying to open the devices preferences

itunes crashes when trying to open the devices preferences. I use Mac osX 10.7.3 and iPhone 4s. The iPhone (and iPad) syncs via WLAN but when i try to open the iPhones/iPad Preferences in iTunes iTunes crashes. Any Idea?

Hi there AlexHB123,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

PC crashed. Attempted to install NEW copy of Elements 10 that I had in reserve. Always get ERROR MESSAGE 400 when trying to open the program. Please advise how I get around this error.

My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit

if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5

Regarding UCF_AcroForm error displayed when trying to open the pdf form

Hi,
Iam receiving the pop up when trying to open the pdf form.The Error is Server Error Class: UCF_AcroForm Method: Error.The Error displayed in some system and in some other system the form is working fine.The Form is created using the Designer 8.0.The form is working fine in reader 8.0.Is there any problem in the reader version.Is there any solution for this problem please provide.
Thanks and Regards,
SatheshKumar R

Sathesh,
Similar issue has been reported at SDN so searching would have helped you. See below threads for solutions:-
UCF_AcroForm error
MSS UCF_AcroForm error displayed when trying to display form in PCR
Chintan

HT4913 Can I use iTunes Match when I don't have internet connection?

Can I use iTunes Match when I don't have internet connection?

If you've downloaded the music that you want to be able to listen to when you don't have an internet connection - you won't be able to stream or download whilst offline.
Using Match on an iOS device : http://support.apple.com/kb/HT5637

"The file is damaged and could not be repaired" error when trying to open a PDF in Reader

A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
Computers:
1 Dell Vostro desktop running WIndows 7
1 Toshiba Satellite C55 runnign Windows 8
1 Samsung ATIV Book 4 running Windows 8
All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
Did Not Work:
As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
Saving the file to hard drive and then opening in Adobe did not work.
Turning off Protected Mode and Enhanced Security did not work.
Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
Does work:
I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
If they close the error and continue trying to open the file over and over sometimes it will eventually open.
Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
James

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

Have you turned the iPad off then back on? That often helps with problems.

ITunes crashes when trying to open the store , windows 8.1

I have windows 8.1 and a modern pc , everytime I open itunes it crashes , and if it does not crash when I open it , it crashes halfway when it tries to open the store - I've tried re-booting , re-installing and it won't work.
Causing me some stress , would be very gratefull for some useful advice !
Thanks !

Hi there AlexHB123,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

Grey color cover the screen and can't use touch screen when trying to open the internet.

Similar Messages

Maybe you are looking for