Grey out out ESLL=TBTWR in Service purchase order
Hi I need to grey out out ESLL=TBTWR in Service purchase order when the status is released 'S'?
I Tried Include LV69AFZZ - form userfield modification -it works for conditions tab but not for service tab.
I need to grey out only for released PO , others cases allow user to edit.
Kindly Suggest.
everything there in snap,
Go to function group MLSP,
Screen 0400->PBO Module MODIFY_SCREEN_ROW ->PERFORM MODIFY_SCREEN_ROW
->PERFORM FELDAUSWAHL.
Here you have to do Implicit enhancement.
Remember to add, If sy-tcode = 'ME22N'.
Similar Messages
-
SMBLN filed blank in case of service Purchase order for MSEG
Hi expert
SMBLN (Number of Material Document) filed blank in case of service Purchase order for MSEG.
if i check for normal po i get my number for which i have doing reverse.
Case example
when i check in mseg for Mvt 106 Material Docu No , in the field SMBLN i get for the Material Docu No of 105 for normal PO.
when i check in mseg for Mvt 102 Material Docu No , in the field SMBLN i dont get for the Material Docu No of 105 for Servicel PO
Regard
Nabil
Edited by: sayednabil on Apr 11, 2011 11:50 AMHello andrewjkasten,
It's good to hear from you again, although I truly wish it were to share a more pleasant experience than when we previously conversed. It is always great to keep an eye on sales however you can so you don't miss them! I'm sorry to hear a technical issue may have caused your order to not reach our systems and missing out on a great sale price!
Using the information you registered with the forum, I've sadly been unable to locate your computer order. With that said, I would like to look further into this and am sending you a private message to gather the necessary information. I look forward to your correspondence!
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message -
Service purchase order with quantity
Hi all,
Is it possible to create a service purchase order with quantity ?
Our client is using sap b1 2005b pl39.
Expecting you all valuable reply.
JeyakanthanHi, Jeyakanthan,
I guess there are 2 ways out for this:
1. Define the Service as an item ...i.e. create aitem master for it.Then you can define the quantities for it.
2. Use a UDF in the service type document as quantity and put a FMS to calculate the qty.
Nagesh -
Closing service purchase order
hi all
i have a service purchase order, i have taken some services through service entry sheet, done invoice verification of the services. now i have no services coming from vendor, i want to short close at this stage. can anybody suggest the method to close the service po. i dont want to edit the service po quantity to the current required quantity, as the release procedure will re trigger.
thanks in advance
anilHi,
Open the last service entry sheet carried out for this PO, open the SES using ML81N and go for change mode and at the top you will find an icon for final set indicator.
Set this indicator and save the settings. So that furhter this PO cant be used for making any service entry sheets.
Regads,
RitiG -
Price Change indicator in Service Purchase order
Dear Friends
I am making one service purchase order, at service item level one price change indicator appears if its selected then at the time of service entry sheet it is possible to change value
But in my case,this indicator is not appearing at the time of raising PO, can anybody guide me at what screen level we can make field settings according to this.
Regards
VIvekI think it is invesible for you
go to Item detail scree in the PO
here you will see the Color squar at the corner of service tab
here click on that Icon
it will open the tablesetting pop up
here click on administrator adn uncheck the ESLL-PRS_CHG field
Than click on activate and save
now you will see this field. -
Copy a service P.O. to create a new service purchase order
I want to create a new service purchase order with items category D. However when I give ref. of some another purchase order the vendor and org. data fields become grey. How do I change these fields in new purchase order which I want to create? In case of material P.O. these fields are editable.
Pl. help.
Regards.Dear,
Please check at the time of Service order creation the document type of purchase order is for services. If no please first change document type in ME21N select document type for service po then enter reference of document number in field of purchase order and it's line item at item detail level.
So please compare your process of purchase order creation with below detail.
Enter ME21N -Select document type for po.
Then enter purchase order number in field of reference purchase order field. then check your data.
Regards,
Mahesh Wagh. -
Service Purchase Orders extraction
Can anyone please tellme where can I find the account assignment for each service line on a service Purchase Order? (not each item, but each service line associated to each item). I really need to find this because I need to extract data from one server and load it into another using BAPI_PO_CREATE1.
I used BAPI_PO_GETDETAIL1 to get the data on extraction, but on account table it only gives me the account data by item, not by service line.
Can anyone help me? I really need to solve this soon.
Thanks in advance.Thanks a lot vikrama sharma, that's the table, however, you don't say how it's linked to the Purchase Order, and it's not that trivial, I'll post here the answer I got from another forum that has worked in case it helps someone else:
>
> Note that ESLL links to itself Rolling Eyes. EKPO-PACKNO links to ESLL-PACKNO (package); then ESLL-SUB_PACKNO > links to ESLL-PACKNO (the service lines).
>
> EKKN is the Purch Ord item account assignment table, with ZEKKN the account assignment id.
>
> ESKL is the service line account assignment. EKPO-PACKNO -> ESKL-HPACKNO; ESKL-ZEKKN -> EKKN-ZEKKN gives > the account assignment where ESKL-PACKNO & ESKL-INTROW link to the service line (second level ESLL).
>
> If you use service limits then these are stored in ESUH. To get account assignment for a limit: EKPO-PACKNO -> >ESUH-PACKNO -> ESKL-PACKNO AND ESKL-HPACKNO; ESKL-ZEKKN -> EKKN-ZEKKN.
Thanks,
Unknown. -
DELIVERY COMPLETED indicator for Services Purchase Order
hello experts,
i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order.
i have a big problem:
is it possibile to set the DELIVERY COMPLETED indicator (<i>ELIKZ</i>) in services purchase order via BAPI or Function Module?
<i>I'm working with BAPI_PO_CHANGE but and i succeded with material PURCHASE ORDER but not with SERVICES PURCHASE ORDER</i>.
can anyone help me?
thanks in advance,
ElianaFor material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant -
Import Tab for Service Purchase Order
Dear Friends,
Is it possible to bring Import Tab (Foriegn Trade) at item level of Service Purchase Order. Please let me know the configuration step.
Regards,
S.SureshHi Suresh ,
Follow the below customsing path :
MMSPROPurchasingForeign Trade/CustomsControl Foreign Trade Data in MM and SD Documents--Import Screens In Purchasing Document
Regards
Ramesh Ch -
Pricing determination for services purchase order
Hi All,
Please provide the configuration and assignment steps involved for service Purchase orders.
Regards
VijayHi Vijay
Please check the following links,
Service Pricing Conditions
Hope Help U..
Regards
Vikrant -
Service purchase order bapi_po_create1 error: maintain services or limits
I am trying to create service Purchase Order.
I am getting error: 'Purchase order still contains faulty items, Please maintain services or limits'.
Struggling to solve this. Can anybody shed some light on this to solve.
I would appreciate your any help.
thanks.
The following is the code I am working.
REPORT ZAUTO_PO_CREATE1 .
constants: c_x value 'X'.
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_polimits type standard table of BAPIESUHC,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
wa_BAPIESUHC type BAPIESUHC,
ws_po TYPE bapimepoheader-po_number.
data: wa_it_xlikp like line of it_xlikp.
loop at it_xlikp into wa_it_xlikp.
endloop.
data: wa_it_xlips like line of it_xlips.
loop at it_xlips into wa_it_xlips.
endloop.
data: wa_it_xvbpa like line of it_xvbpa.
loop at it_xvbpa into wa_it_xvbpa.
if wa_it_xvbpa-parvw = 'SP'.
wa_header-vendor = wa_it_xvbpa-lifnr.
endif.
endloop.
*data: it_komp type table of komp,
wa_it_komp like line of it_komp.
loop at it_komp into wa_it_komp.
endloop.
service PO is only for YLF delivery type.
if wa_it_xlikp-lfart ne 'YLF'.
exit.
endif.
shipping conditions.
*case wa_it_xlikp-vsbed.
*when '3P' or 'CP'.
*exit.
*endcase.
wa_header-doc_type = 'YB'.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = '0005000000'.
wa_header-comp_code = 'OB01'.
wa_header-purch_org = 'OB01'.
wa_header-pur_group = 'OB9'.
wa_header-CURRENCY = 'USD'.
wa_header-vper_start = '20061118'.
wa_header-vper_end = '20061126'.
wa_header-ref_1 = 1.
wa_header-incoterms1 = 'AOS'.
wa_header-incoterms2 = ''.
wa_header-our_ref = 'N'.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
wa_headerx-ref_1 = c_x.
wa_headerx-incoterms1 = c_x.
wa_headerx-incoterms2 = c_x.
wa_headerx-our_ref = c_x.
wa_poitem-po_item = '00010'.
wa_poitem-short_text = 'Automatic generation - Freight'.
wa_poitem-plant = '0089'.
wa_poitem-quantity = '1'.
*wa_poitem-MATERIAL = '10'.
wa_poitem-NET_PRICE = '23.00'.
wa_poitem-po_unit = 'ACT'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
*wa_poitem-matl_group = 'S1'.
*wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = '00010'.
*wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-net_price = c_x.
wa_poitemx-po_unit = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_poitem-po_item .
**wa_poitem_sch-delivery_date = ''.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_poitem-po_item.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = wa_poitem-po_item.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '5210'.
wa_acct_***-co_area = 'OB01'.
wa_acct_***-costcenter = '36089'.
wa_acct_***-funds_ctr = 'DUMMY'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = wa_poitem-po_item.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
wa_acct_***-funds_ctr = c_x.
APPEND wa_acct_assx TO i_acct_assx.
*services/ limits
*wa_BAPIESUHC-limit = '3000.00'.
wa_BAPIESUHC-EXP_VALUE = '300.00'.
wa_BAPIESUHC-no_limit = 'X'.
*wa_BAPIESUHC-NO_FRLIMIT = 'X'.
append wa_bapiesuhc to i_polimits.
wa_services-pckg_no = '20'.
wa_services-line_no = '2'.
wa_services-service = '0005000000'.
wa_services-subpckg_no = '10'.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = 'TEXT'.
wa_services-from_line = '1'.
wa_services-to_line = '2'.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = '20'.
wa_srvacc-line_no = '1'.
wa_srvacc-serno_line = '02'.
wa_srvacc-serial_no = '02'.
wa_srvacc-percentage = '100'.
APPEND wa_srvacc TO i_srvacc.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
no_authority = c_x
no_price_from_po = c_x
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
*POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS = i_polimits
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
***confirms the document creation by database commit.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN =
LOOP AT i_return INTO wa_return.
WRITE wa_return-message.
ENDLOOP.Fill this tables:
GT_POSRVACCESSVALUES TYPE STANDARD TABLE OF BAPIESKLC,
GT_POCONTRACTLIMITS TYPE STANDARD TABLE OF BAPIESUCC,
Glauco -
Hi MM Gurus,
Scenario is
Service Purchase Order for Travelling Charges ,
Service maintained at service tab is travelling charges 12 nos for 38000/- each
item cat D .
In main text of PO item qty appears is 1 nos and amount is 456000/- ok.
Service tax ia applicable on it is 12.36% ok
But base amount for this is 40% of 38000/- that means service tax is applicable on 40% of gross amount.
I am using manual condition Zser that is base service amount.
Up to this it is working fine.
Service Entry sheet filled, accepted and saved .ok
there are two service sheets 10000283 and 100000284 for example
During MIRO if i took the ref of service entry sheet and try to post the purchase order the tax amount system calculates is based on total amount that is 4560000/- and not on 38000/-, due to this i am facing problems in invoice verification.
Pls suggest
With regards
Nagarjuna ReddyDear Prashant,
No I have checked once again, Tax value is not getting divided as per individual service entry.
means that for total 10 service sheets are there and during miro is entered with referce of service entrysheet, tax value is showing means for each entry sheet total tax of 10 entry sheet of 40% amount is shown
Pls suggest
Nagarjuna Reddy -
Condition type for deduction in service purchase order
Hi All,
Our client has scenario where in transport service Purchase order, client wants to deduct some part of amount as a security fund.
E.g client takes transport service from vendor amounting Rs. 1000 and client deducts Rs. 10 as a security fund so payment to vendor is Rs. 990. This deduction amount should go to separate GL.
Kindly let me know how can we map this scenario? I guess we can do this with the help of condition type but dont know from where to start and what will be the nature of condition type.
Thanks in advance.
Regards,
Nisha.Hi
What client is going to do with security deposit? Do they settle over a period of time?
Based on that you can do the config setting.
Case 1) Retaining of security deposit.
If client is not paying back and wants to keep the security deposit. They Wants to have track record of the same. Then you can use Z condition type by copying R002 discount using M/06 and assign GL in OBYC for that condition type.
Case 2) paying back security:
Create Z condition type by copying any freight condition and assign GL in OBYC
While creating PO use condition type.
While repayment of security deposit FI will use same GL as Db and vendor account as Cr using F-44.
Rgs -
Material in Service Purchase order
Hi Experts,
Please let me know is it possible to Enter Service and Material both in Service Purchase Order.
My client is asking for above requirement. He wants to add Material No. also in Service po.
If there is any possiblility. Please let me know.
Reg,
AshokHi,
In standard purchase document ie NB system is allowing to add service and material both.
but my client has a seperate document type for Service purchase order.
When iam trying to add service and material both in this doc type system is throwing errors.
note:
I went to Purchase order documents types and selected the Service document type and in allowed item categories Standard doc type added.
Later i have created service entry sheet for service and done migo for material.
Could any one please explain whether is this the correct way.
Reg,
Ashok -
Hi,
In my scenario I am sending material i.e Shirts ( item) for ironing process to the vendor as subcontracting ironing service through order. I would like to get back the material from vendor w.r.t PO order and payment to made to service performed throgh invoice verification w.r.t service entry sheet.
My thought up on the process to create subcontracting PO on subcontracting vendor along with articles. Article will be received to vendor as subcon article w.r. t subcon PO. After completion of service it will be return to our end w.r. t PO. GRN will be performed. Since it is regular practice, I would like to create service master for repective services and will be treated /incorporated in PO similar to service purchase order. Based on this purchase order SES will be created and payment of service will be settled through invoice verification w.r.t service entry sheet.
Please let me know whether my thinking are in line or not. if not please suggest the alternative.you can reach through phone also.
Thanks & regards,
Sanjay Rahangdale
09327162228ok
Maybe you are looking for
-
Hi, I have a bit of a problem with my program. I have a class that runs my GUI for the application that I am developing. One of the features of the GUI is that when you hit the "Speak" button a recording is made of the speech input from a mic connect
-
How to use ZMATERIAL info object attribute in existing report
Hi all, Using generic extraction we have created data source related that data source we have created navigational attribute for info object ZMATERIAL. Data available for ZMATERIAL info objects. Now ZMATERIAL info object related navigational
-
Disk Warrior vs Data Recovery 3
The subject is basically my question. It seems as though my hard drive has completely crashed and is not even bootable in any manner whatsoever. It is a G4 mini with what I believe was OS X (10.4.8). Does anyone have any experience that would make yo
-
Uneven 24" Display, is this normal?
I have an Intel iMac with the 24" LCD. I had noticed that the screen's brightness was uneven. Lighter on the left, gradually getting darker towards the center and getting a little lighter towards the right. I have Apple Care and brought it to the App
-
How can i get toast to interact with aperture 3?
Since apple no longer supports iDvd; I've had to search for method to burn photos onto a DVD( that's what my customers want.) I thought Toast 11 would be th answer to my problem. nope. I installed with a download from Roxio and the application do