Grey-out Row in ALV Grid

Hi,
Is it possible that when a user higlights a row in ALV, the entire row will be uneditable? Please teach me how.
Thanks,
Jim

This code works for grey cells...But it could be adapted to lines -;) It uses OO ALV...
*& Report Z_DUMMY_ATG
REPORT Z_DUMMY_ATG NO STANDARD PAGE HEADING.
TABLES: SPFLI.
*============================================================
* Variables
*============================================================
DATA: OK_CODE TYPE SY-UCOMM,
 L_MODE TYPE RAW4,
 W_TABIX TYPE SY-TABIX.
*============================================================
* Tablas internas
*============================================================
DATA: L_S_LAYO TYPE LVC_S_LAYO.
DATA: WA_EDIT TYPE LVC_T_STYL WITH HEADER LINE.
DATA: IT_EDIT TYPE LVC_T_STYL WITH HEADER LINE.
DATA: BEGIN OF G_WA_SFLIGHT.
 INCLUDE STRUCTURE SPFLI.
DATA: CELL_TAB TYPE LVC_T_STYL.
DATA: END OF G_WA_SFLIGHT.
TYPES: BEGIN OF SPFLI_TAB.
 INCLUDE STRUCTURE SPFLI.
TYPES: CELL_TAB TYPE LVC_T_STYL.
TYPES: END OF SPFLI_TAB.
TYPES: SPFLI_TABS TYPE STANDARD TABLE OF SPFLI_TAB.
DATA: GI_SFLIGHT TYPE SPFLI_TABS.
DATA: BEGIN OF AUX_TAB OCCURS 0,
 CARRID LIKE SPFLI-CARRID,
 CONNID LIKE SPFLI-CONNID,
 CITYFROM LIKE SPFLI-CITYFROM,
 AIRPFROM LIKE SPFLI-AIRPFROM,
 CITYTO LIKE SPFLI-CITYTO,
 AIRPTO LIKE SPFLI-AIRPTO,
 END OF AUX_TAB.
DATA: SPFLI_TAB_WA LIKE G_WA_SFLIGHT.
FIELD-SYMBOLS: <SF> STRUCTURE G_WA_SFLIGHT
 DEFAULT SPFLI_TAB_WA.
*============================================================
* Objetos
*============================================================
DATA: CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
 ALV_LIST TYPE REF TO CL_GUI_ALV_GRID.
*============================================================
* Selección de Datos
*============================================================
SELECT *
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE AUX_TAB .
LOOP AT AUX_TAB.
MOVE-CORRESPONDING AUX_TAB TO <SF>.
APPEND <SF> TO GI_SFLIGHT.
ENDLOOP.
*============================================================
* Instancimiento de Objetos
*============================================================
CREATE OBJECT CONTAINER
 EXPORTING CONTAINER_NAME = 'LIST_AREA'.
CREATE OBJECT ALV_LIST
 EXPORTING I_PARENT = CONTAINER.
*============================================================
* Procesamiento
*============================================================
LOOP AT GI_SFLIGHT INTO G_WA_SFLIGHT.
W_TABIX = SY-TABIX.
IF G_WA_SFLIGHT-CITYTO EQ 'SAN FRANCISCO'.
 L_MODE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
 MOVE 'CITYTO' TO WA_EDIT-FIELDNAME.
 MOVE L_MODE TO WA_EDIT-STYLE.
 INSERT WA_EDIT INTO IT_EDIT INDEX W_TABIX.
 G_WA_SFLIGHT-CELL_TAB[] = IT_EDIT[].
ENDIF.
MODIFY GI_SFLIGHT FROM G_WA_SFLIGHT.
ENDLOOP.
MOVE 'CELL_TAB' TO L_S_LAYO-STYLEFNAME.
CALL METHOD ALV_LIST->SET_READY_FOR_INPUT
 EXPORTING I_READY_FOR_INPUT = 1.
CALL METHOD ALV_LIST->SET_TABLE_FOR_FIRST_DISPLAY(
 EXPORTING I_STRUCTURE_NAME = 'SPFLI'
 IS_LAYOUT = L_S_LAYO
 CHANGING IT_OUTTAB = GI_SFLIGHT ).
*============================================================
* Dynpro
*============================================================
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
 SET SCREEN 0.
 LEAVE SCREEN.
 CLEAR OK_CODE.
ENDIF.
ENDMODULE.
Greetings,
Blag.

Similar Messages

Grey out rows in ALV

Hi All,
Following is my requirement.
1. I will have a ALV grid output.
2. By selecting few records, user can click on the push button provided in appilcation tool bar
3. Once he clicks on the push button, the selected records should be greyed out(user can't select them again)
How to achieve this in ALV. I have tried some of the methods related to cell tab styles but none of them worked.
Thanks in advance....

Hello,
You wrote, that you tried to use the cellstyles to grey the rows, but id didn't work. Recently I did gray some rows in my report (using ALV OO cl_gui_alv_grid), so I know it works.
Additionaly to making cell styles (I assume you know how to do this) for each cell in the row you want to grey, you must do two things more :
1. Provide information in your alv layout structure (it is not field catalog) - structure lvc_s_layo, like below
DATA: gs_layout TYPE lvc_s_layo.
gs_layout-stylefname = 'CELLSTYLES'.
2. After specifying which cells you want to grey, you have to refresh table display.
Then it works.

Grey out(disable) a row in ALV grid

Hi,
I want to know how to grey out(disable) row wise in ALV grid display.
i..e.. Few rows in ALV grid display shoud be editable and few rows non editable based on certain condition.
How do we do that....Please help.
Thanks in advance.

Hi,
Since fieldcatalog is used to modify coloum and not the row, the fieldcatalog would not solve the problem.
Thankyou.

Color a row with ALV GRID

Hi my friends,
I have written a small ALV Grid where some rows should be colored, dependend on their status in a table. But it's not working and I can't find out, why it is not working. I've already studied all the topics in this forum, which are related to 'row color alv grid', but I can't find the mistake in my code. Is anyone able to find out what is wrong here?
Thanks a lot for your help!
*& Report /BMC_TST_SHOWLOG
REPORT /BMC_TST_SHOWLOG.
TYPES: BEGIN OF log_table.
TYPES: log_level TYPE /bmc_log_message,
 cr_date TYPE /bmc_cr_date,
 message TYPE /bmc_log_message,
 linecolor(4) TYPE c.
TYPES: END OF log_table.
DATA: lt_log TYPE TABLE OF log_table with HEADER LINE,
 lt_log2 TYPE TABLE OF log_table with HEADER LINE,
 lt_log_list TYPE TABLE OF log_table,
 lt_line LIKE LINE OF lt_log_list,
 container_r TYPE REF TO cl_gui_custom_container,
 grid_r TYPE REF TO cl_gui_alv_grid,
 gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_LOG',
 fieldcat_r TYPE lvc_t_fcat,
 layout_r TYPE lvc_s_layo,
 logA TYPE /bmc_log_level,
 logB TYPE /bmc_log_level,
 logC TYPE /bmc_log_level,
 logD TYPE /bmc_log_level,
 logE TYPE /bmc_log_level,
 ls_ct TYPE lvc_s_scol,
 ok_code LIKE sy-ucomm.
*DATA BEGIN OF ls_log_list OCCURS 0.
*DATA: log_level TYPE /bmc_log_message,
* cr_date TYPE /bmc_cr_date,
* message TYPE /bmc_log_message,
* rowcolor(4) TYPE c.
*DATA END OF ls_log_list.
*DATA: lt_log_list TYPE TABLE OF log_table.
PARAMETERS: loglevlA TYPE c AS CHECKBOX,
 loglevlB TYPE c as CHECKBOX,
 loglevlC TYPE c As CHECKBOX,
 loglevlD TYPE c aS CHECKBOX,
 loglevlE TYPE c AS CHECKBOX,
 dateA TYPE /bmc_cr_date OBLIGATORY,
 dateB TYPE /bmc_cr_date.
CALL SCREEN 0200.
MODULE user_command_0200 INPUT.
CASE ok_code.
 WHEN 'BACK'.
 SET SCREEN 0.
 MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
 WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0200 OUTPUT.
SET PF-STATUS 'DYNPRO200'.
SET TITLEBAR 'D0200'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
 container_name = gc_custom_control_name
EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 others = 6.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
*----Creating ALV Grid instance
 CREATE OBJECT grid_r
 EXPORTING
 i_parent = container_r
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 others = 5.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
 PERFORM get_log_data.
*----Preparing field catalog.
 PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
 PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
 CALL METHOD grid_r->set_table_for_first_display
 EXPORTING
 is_layout = layout_r
 CHANGING
 it_outtab = lt_log2[]
 it_fieldcatalog = fieldcat_r
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
 ELSE.
 CALL METHOD grid_r->refresh_table_display
 EXCEPTIONS
 finished = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
 ENDIF.
 CALL METHOD grid_r->register_edit_event
 EXPORTING
 i_event_id = cl_gui_alv_grid=>mc_evt_enter.
 CALL METHOD grid_r->register_edit_event
 EXPORTING
 i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
 DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
 i_structure_name = '/BMC_LOG'
CHANGING
 ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc ne 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
 CASE ls_fcat-fieldname.
 WHEN 'UUID'.
 ls_fcat-no_out = 'X'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'LOG_LEVEL'.
 ls_fcat-coltext = 'Meldungsart'.
 ls_fcat-outputlen = '25'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'CR_DATE'.
 ls_fcat-coltext = 'Erstellungsdatum'.
 ls_fcat-outputlen = '20'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'CR_TIME'.
 ls_fcat-no_out = 'X'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'MESSAGE'.
 ls_fcat-coltext = 'Nachricht'.
 ls_fcat-outputlen = '50'.
 MODIFY pt_fieldcat FROM ls_fcat.
 ENDCASE.
* CASE ls_fcat-value.
* WHEN '1'.
* ls_fcat-line_color = 'c100'.
* ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Log'.
ps_layout-smalltitle = 'X'.
ps_layout-info_fname = 'linecolor'.
ENDFORM.
FORM get_log_data.
if loglevlA = 'X'.
 logA = '1'.
ENDIF.
if loglevlB = 'X'.
 logB = '2'.
ENDIF.
if loglevlC = 'X'.
 logC = '3'.
ENDIF.
if loglevlD = 'X'.
 logD = '4'.
ENDIF.
if loglevlE = 'X'.
 logE = '5'.
ENDIF.
IF dateB ne 0.
 SELECT log_level cr_date message FROM /bmc_log INTO CORRESPONDING FIELDS OF TABLE lt_log_list WHERE log_level = logA
 OR log_level = logB OR log_level = logC OR log_level = logD OR log_level = logE and cr_date >= dateA and cr_date <= dateB.
ELSE.
 SELECT log_level cr_date message FROM /bmc_log INTO CORRESPONDING FIELDS OF TABLE lt_log_list WHERE log_level = logA
 OR log_level = logB OR log_level = logC OR log_level = logD OR log_level = logE and cr_date >= dateA.
ENDIF.
* and cr_date >= dateA.
 SORT lt_log_list ASCENDING.
 LOOP AT lt_log_list INTO lt_line.
 IF lt_line-log_level = '1'.
 lt_line-log_level = 'Info'.
 lt_line-linecolor = 'C100'.
 ENDIF.
 IF lt_line-log_level = '2'.
 lt_line-log_level = 'Warning'.
 lt_line-linecolor = 'C200'.
 ENDIF.
 IF lt_line-log_level = '3'.
 lt_line-log_level = 'Error'.
 lt_line-linecolor = 'C300'.
 ENDIF.
 IF lt_line-log_level = '4'.
 lt_line-log_level = 'Debug'.
 lt_line-linecolor = 'C400'.
 ENDIF.
 IF lt_line-log_level = '5'.
 lt_line-log_level = 'Trace'.
 lt_line-linecolor = 'C500'.
 ENDIF.
 APPEND lt_line TO lt_log2.
 ENDLOOP.
ENDFORM.
SELECTION-SCREEN BEGIN OF SCREEN 0100 TITLE text-001 AS WINDOW.
SELECTION-SCREEN END OF SCREEN 0100.

> change to this
>
> ps_layout-stylefname = 'LINECOLOR'.
>
> sorry ignore the above line
>
> just debug and check what is happening
>
> Message was edited by:
> Chandrasekhar Jagarlamudi
Hi,
I've changed the line to ps_layout-stylefname = 'LINECOLOR'., but then I'm getting a runtime error 'ASSIGN_TYPE_CONFLICT' in program 'SAPLSLVC in line 2975'...
I don't have any idea what is causing that.

Set specific rows in ALV grid ready for input

Hi everyone,
I have a question about how to set specific rows in ALV grid ready for input.
I know that I can make some columns ready for input before the ALV displayed,but I have no idea how to make specific rows displayed in the ALV ready for input.

Hello Aaron
For editable columns we can use the fieldcatalog (LVC_S_FCAT-EDIT = 'X') but for rows you need to define editability on cell level.
The required steps are documented in sample report BCALV_EDIT_02. Below I point out a few crucial points:
*§1.Extend your output table for a field, e.g., CELLTAB, that holds
*   information about the edit status of each cell for the
*   corresponding row (the table type is SORTED!).
DATA: BEGIN OF gt_outtab occurs 0. "with header line
        include structure sflight.
DATA: celltab type LVC_T_STYL.
DATA: END OF gt_outtab.
*§3.Provide the fieldname of the celltab field by using field
*   STYLEFNAME of the layout structure.
   gs_layout-stylefname = 'CELLTAB'.
   CALL METHOD grid1->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_outtab[].
Note: in the sample report only field SEATSMAX is editable. In your case you need
to fill CELLTAB for all fields in a row.
*§2.After selecting data, set edit status for each row in a loop
*   according to field SEATSMAX.
LOOP AT gt_outtab.
    l_index = sy-tabix.
    refresh lt_celltab.
    if gt_outtab-seatsmax ge 300.
        perform fill_celltab using 'RW'
                             changing lt_celltab.
    else.
        perform fill_celltab using 'RO'
                             changing lt_celltab.
    endif.
*§2c.Copy your celltab to the celltab of the current row of gt_outtab.
    INSERT LINES OF lt_celltab INTO TABLE gt_outtab-celltab.
    MODIFY gt_outtab INDEX l_index.
ENDLOOP.
ENDFORM.                               " SELECT_DATA_AND_INIT_STYLE
NOTE: LVC_T_STYL is a SORTED table type. Thus, take care that you are using the
INSERT ... INTO TABLE statement and not APPEND (because then nothing is appended
to the CELLTAB itab).
IF p_mode EQ 'RW'.
*§2a.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_ENABLED to set a cell
*    to status "editable".
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
ELSE. "p_mode eq 'RO'
*§2b.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_DISABLED to set a cell
*    to status "non-editable".
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
ENDIF.
ls_celltab-fieldname = 'SEATSMAX'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT ls_celltab INTO TABLE pt_celltab.
Regards
Uwe

Deactivate the double click/ hot spot for a particular row in alv grid.

Hello,
 As per a certain condition how to deactivate the double click/ hot spot for a particular row in alv grid.
Regards,
Saroj

where u define layout there is a field hotspot.like
data: var.
if con is true
var = 'X'. (show hotspot)
else.
var = ' '. (deactive hotspot)
elseif ws_fieldcat-fieldname = 'DMBTR'
 AND ws_fieldcat-tabname = 'T_MTAB'.
 ws_fieldcat-do_sum = C_X.
 ws_fieldcat-hotsopts = var.
 MODIFY Wt_fieldcat FROM ws_fieldcat
 TRANSPORTING DO_SUM.
It is helpful for u. if any problen send me ur coding i will change it.
Regards
Manish Kumar

How to change a color for a row in ALV grid display

Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plz

Hello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks!

HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID?

HI.
HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID????
GABRY =)

You need to use
data : grid1 type ref to cl_gui_alv_grid.
call method grid1->get_selected_rows
importing
et_index_rows = i_sel_alvrows[].
a®

Changing font size(bold) or color of a particular row in ALV Grid Digplay

Hi Experts ,
I am having a requirment to highlight some particular rows in ALV Grid Display . To achieve this i need to change font size or make it bold or change color of that row .
Please give me some inputs .
Thanks in Advance.
Vijyeta

Hi
Coloring An Entire Row
Coloring a row is a bit (really a bit) more complicated. , you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row.
First you have to declaration of our list data table u201Cgt_listu201D.
DATA BEGIN OF gt_list OCCURS 0 .
INCLUDE STRUCTURE SFLIGHT .
DATA rowcolor(4) TYPE c .
DATA END OF gt_list .
Adding the field that will contain row color data
As you guess, you should fill the color code to this field. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by passing the name of the field containing color codes to the field u201CINFO_FNAMEu201D of the layout structure.
e.g.
ps_layout-info_fname = <field_name_containing_color_codes>. u201Ce.g. u2018ROWCOLORu2019
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
Try this link also:
Possible functionalities in ALV
Regards
Neha

Default 10 rows in ALV grid

Hi Group,
My requirement is to show 10 default rows in ALV grid (with 4 fields in ALV grid), whenever Create radio button is selected in Selection Screen.
Please could you help me with this.
Thanks and Regards,
Kumar.

Thanks for your reply.
Sorry I forgot to mention earlier.
I have to show default 10 empty rows (editable) whenever the Create radio button is selected on the Sel Screen.
Kindly assist with this regard.
Thanks and Regards,
Kumar.

How to color a row in ALV grid display

Hi,
A few rows in the output of ALV grid display should be shown in different color.How can I achieve this?

Hi,
Try out this code
DATA : BEGIN OF G_T_CASH OCCURS 0,
 PARTICULARS TYPE CHAR120,
 AMOUNT1 TYPE CHAR20,
 AMOUNT2 TYPE CHAR20,
 AMOUNT3 TYPE CHAR20,
 ROW_COLOR TYPE CHAR4,----
add this in the internal table for alv
 END OF G_T_CASH.
CLEAR G_WA_CASH.
G_WA_CASH-PARTICULARS = 'Opening Cash Balance'.
G_WA_CASH-AMOUNT1 = G_DMBTR.
G_WA_CASH-AMOUNT2 = ''.
G_WA_CASH-AMOUNT3 = ''.
while appending other values also add the following code
G_WA_CASH-ROW_COLOR = 'C200'.----- C200 depicts light gray color
APPEND G_WA_CASH TO G_T_CASH.
add the following code in layout
MOVE 'ROW_COLOR' TO WA_LS_LAYOUT-INFO_FIELDNAME.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_BYPASSING_BUFFER = ' '
 I_SAVE = 'A'
 I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 IS_LAYOUT = WA_LS_LAYOUT
 IT_FIELDCAT = G_T_CATALOG
 IT_EVENTS = GT_EVENTS
 TABLES
 T_OUTTAB = G_T_CASH[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Let me know if the problem still persist.
Regards,
Janaki

Selecting both - Column and Rows in ALV Grid

Hi All,
I am developing a module pool in which in a ALV Grid Display the user wants to select multiple rows and multiple columns.
How to set this in ALV grid? Right now I can set selection of multiple rows but once user clicks on column the rows are deselected and the column gets selected.
Similarly when user selects on one column and clicks on another column the previous selected column gets deselected.
Is there any way to do this in ALV Grid?
Thanks,
Rashmi.
PS: I am using OO ALV for this development.

Hi Andrey,
I know this. I was just trying to find out if there is some other alternative to this.
Anyways, this seems to be the only choice.
Thanks,
Rashmi.

To have a list in a field of a row in ALV Grid

Dear Colleagues,
My question is that in an ALV Grid we have a number of rows.
Now in the row suppose i want one field as a drop down list with definite values is it possible..??
If so is there a function module to do this..??
Thanks and Regards
Varun

That was very helpful, But unfortunately that only allows only a pre defined list to be displayed....
I want a new drop down list for each record..??
Would that be possible..???
Is there any module for that...????

Hotspot click for only some rows in ALV grid for a particular column ?

Hi there,
        In ALV grid, we can make Hotspot enable for all rows in a specified column
by specifying in the fieldcatalog with Hotspot attribute set as true.
But I want to enable Hotspot only for certain rows in the particular column. I tried with MC_STYLE4_LINK , but I didnt got the required result.
So , how could I achieve that in ALV grid.
Points would be rewarded for helpful answers.
Regards,
Anil .

Hi,
You can do it for a column. Please refer to the code snippet below,
DATA : it_fcat TYPE lvc_t_fcat,
         wa_fcat LIKE LINE OF it_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
   EXPORTING
I_BUFFER_ACTIVE              =
     i_structure_name             = 'SMMW_ALERTS_ICON_S'
I_CLIENT_NEVER_DISPLAY       = 'X'
I_BYPASSING_BUFFER           =
I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = it_fcat
   EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
LOOP AT it_fcat INTO wa_fcat.
IF wa_fcat-fieldname = 'STATUS'.
    wa_fcat-hotspot = 'X'.
    MODIFY it_fcat FROM wa_fcat.
    CLEAR wa_fcat.
ENDIF.
ENDLOOP.
CALL METHOD l_obj_alv_grid->set_table_for_first_display
      EXPORTING
    i_structure_name              = 'SMMW_ALERTS_ICON_S'
   CHANGING
        it_outtab                     = lt_alerts_st
        it_fieldcatalog               = it_fcat.
In the above replace the structure 'SMMW_ALERTS_ICON_S' with your structure and column 'STATUS' with your desired column.
Hope this helps,
Regards,
Vinodh

Single Click on a Row in ALV Grid

Hello,
I am using 'CL_GUI_ALV_GRID' class for displaying an ALV grid.
The requirement is when an user clicks on a row of the grid, a popup should be displayed with the details of that line, the user can edit/enter some fields there and when clicks on the save button, the updated values should get saved in database.
Which event needs to be used for this? A sample code will be very useful.
Thanks
Indrajit.

Hello Indrajit
The same behaviour you see in the IDoc Monitor (transaction WE02, report RSEIDOC2). The event you need to handle is DELAYED_CHANGED_SEL_CALLBACK.
Coding copied from RSEIDOC_ALV_CL:
***INCLUDE CLASS_ALV .
* LOCAL CLASSES: Definition für ALV Ereignisse
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
    handle_delayed_changed_sel_cb
        FOR EVENT delayed_changed_sel_callback OF cl_gui_alv_grid,
METHOD handle_delayed_changed_sel_cb.
data: lt_rows TYPE lvc_t_row.
data: l_row   TYPE lvc_s_row.
CALL METHOD grid->get_selected_rows
           IMPORTING et_index_rows = lt_rows.
CALL METHOD cl_gui_cfw=>flush.
read table lt_rows index 1 transporting no fields.
if sy-subrc ne 0.
    exit.
endif.
perform fill_special_values tables lt_rows.
need_refresh = 'N'.
set screen 100.
leave screen.
ENDMETHOD.
Regards
Uwe

Grey-out Row in ALV Grid

Similar Messages

Maybe you are looking for