Grey Question mark appeared at top left of all windowws
There has suddenly appeared a large grey question mark at the top left of all windows, for example,the main HD window and all the folder windows.
The finder text font is also different to how it was before.
I thought upgrading to Leopard might have fixed it but it is still there.
Any ideas?
Thanks everyone.
Buckminster, welcome to Apple Discussions.
I note that you are using Leopard on a Powerbook G4. This forum is for G4 desktops. You are more likely to get an answer if you post in the Leopard 10.5 forum @ http://discussions.apple.com/category.jspa?categoryID=235
Cheers, Tom
Similar Messages
-
Weird mark appeared on top left of body
I've noticed a line appear on the body of my mbp, its on the top left of the unibody, just above where the mic is, parallel (perfectly as far as i can see) to the top edge.
I have no idea where this mark has come from but it seems to have gotten bigger since i first noticed it (about an inch and a half/2inches now)
anyone have this problem/know what is causing it?
i can try take a pic and upload it if that will help?This issue can be caused by an extension that isn't working properly.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You have quite a few extensions installed, so this may be difficult to track down. -
Grey question mark in harddrive window
On my iMac OSX10.4.8, When I open the Macintosh HD window, either from the desktop or the dock, a large, static,grey question mark appears at the top of the window on the mettalic looking window frame, just to the left of the small (spotlight?) search panel with a magnifying glass icon.
Everything seems to be working ok, but there is obviously an underlying problem.
Does anyone have any suggestions about this? All advice gratefully accepted.
toymaker1I'm not exactly sure of what you are seeing have you tried clicking on the question mark to see what happens? Is there any way you could take a screen shot and post it?
Miriam -
My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)
Hey Carolinearnold!
I have an article for you that seems to address this issue and can provide some troubleshooting steps for you:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I had an Excel file icon in my Dock on the compter. When I restarted my computer a Question mark appeared where the file icon was located in the dock. I need to find that file. I can't locate it either on my computer or on the Time Capsule . Anyone have any thoughts where the actual file may be located?
Sorry, you lost me.
If the file is on your computer, then you will find it if you open Excel, click the File menu, and click Open Recent.
If you deleted the file before Time Machine saved it, it is gone.
If the file was on your computer long enough for Time Machine to save it, it will be in your Time Machine backups.
Open up Time Machine, wait a few minutes for it to load, and click on All Files on the left side of the window.
Then scan to select a purple bar over on the right hand side of the window to select a recent date when you know that the document was on your Mac.
If the document was saved, then you will see it in there somewhere. Click on the file to highlight, then click Restore to bring it back to the present time. -
Question Mark flashing on top of folder
sure hope someone reads this.
Every once in awhile i get a question mark flashing on top of a folder icon. not every time, just occassionaly. but tonight is different.
I restarted about 4 times before I could get it to come up so i could post on these forums.
I partitioned my HD into 2 parts and updated to Maverick. every since then i have problems starting up. Ive run permissions, disk first aid, etc and all seems to check out fine.
Ive gone to system preferences and selected the correct startup disk several times.
It is an early 2008 tower model. it has ran like a well oiled machine ever since i bought it...... even it goes out today. i can say ive definitely gotten my moneys worth from this machine.
also, the original ram went out after i updated and i replaced it. im running 6 GB memory. it seems to check out ok.
I have all my data on several external HDs. i only have applications loaded on the main computer.
sure hope someone can help me. i love this machine. its been my life saver.Have you seen this support article and proceeded through all mentioned troubleshoots?
A flashing question mark or globe appears when you start ...
You may need to erase your normal startup disk and reinstall OS X -
IMAC won't start. Folder Icon With Question mark appears
it will also not take the startup disc. I plop it in , hold 'C' ket to make a disc repair fut nothing happens, now screen is all grey.
HI,
A flashing question mark appears when you start your Mac
If nothing at the link above helps, try booting while holding down the Option key. That will prompt the Startup Manager window.
Since you can't boot from your install disk, Start up in Safe Mode
Carolyn -
I keep getting an intermittent error on web pages where a blue box with a question mark appears instead of pictures. For example Facebook and Zappos would load normally on one visit, but if I visit other websites and return I get the blue box instead of pictures. If I restart the problem will go away temporarly. However, normally returnes in time.
HI,
From the Safari Menu Bar click Safari/Preferences then select the Appearance tab. Tick the box next to: Display images when the page opens.
If that box is already ticked, from the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. If you still have problems loading images, go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
Make sure Safari is not running in Rosetta. Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
Carolyn -
I MAC SHUTS DOWN THEN QUESTION MARK APPEARS
NEW TO APPLE MY IMAC SHUTS DOWN THEN A QUESTION MARK APPEARS THEN IT RESTARTS HAPPENED A FEW TIMES ANY IDEAS IT DOES SEND A REPORT TO APPLE THANKS
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Red light appearing in top left corner of touchscreen
Has anyone else experienced this problem, where intermittently, a red light edge appears in top left corner of screen?
Doesn't always appear.....which makes me think there is a defect with the screen itself.....any thoughts?
Solved!
Go to Solution.It's the notification indicator. Swipe down from the corner to show the status bar, and you'll see an exclamation mark icon. Tap it to see the notification.
Files & Folders, the unified file & cloud manager for PlayBook and BB10 with SkyDrive, SugarSync, Box, Dropbox, Google Drive, Google Docs. Free 3-day trial! - Jon Webb - Innovatology - Utrecht, Netherlands -
My macbook fell and since then a white screen with question mark appears
hey guys!
i really need to know what to do, my macbook fell while it was on. it froze so i restarted it, but the white screen comes in with the apple begining sound and everything but the screen stays blank for about two minutes and then a folde with a question mark appears. i tried putting in the cd that came with it, samething happened but after a while the appe sign appears and the computer started off my installation disc, so i try re installing everything, but when i get to the screen that asks to select a destination, there is nothing available.
i realize that the best thing to do is to go to an apple store and then sort everything out, but i am in haiti where the nearest apple store is in miami, i really need your help and i'm desparate cuz i cannot do anything without my laptop... please send me your help as soon as possible.
thanks in advanceYour hard disk has been damaged. At this point, it will need to be replaced with a new one. You'll need to call AppleCare and they'll have you mail it in for repairs. I'm not sure what the usual turnaround time for that is internationally, but in the United States it's about a week. I'd tack on a few extra days to get the laptop to and from Haiti.
Either way, your computer will need to be repaired and the data that was on your hard disk will be lost. (Unless you take the machine to a 3rd party repair shop that specializes in recovering data from damaged hard disks.) -
Sorry put all question on subject line. As I said fitted new hard drive, but all I get is a folder with a flashing grey question mark. Tried system disk but that is now just spinning around in DVD drive and I can't get it out. Any help with these problems would help
Sounds like the new drive is not being recognized. Could be it's a SATA3 drive with a 6Gb/s transfer rate and needs to be jumpered down to 3. But if the 2007 is 1.5, it may not work at all, even if jumpered down. Other possibility is a not properly secured cable or a cable that's come loose from the logic board.
What is the model of the 2007 Mac? What's the new drive? Did you do the installation or was it done by a shop?
You can find your model here. Look next to Standard Hard Drive:
http://www.everymac.com/systems/apple/imac/index-imac.html
Message was edited by: WZZZ -
Blue Question marks appear...
Blue Question marks appear when websites like Facebook have pictures. This began after Uverse was installed in my home. It did not do this previously with ATT High Speed Internet. Uverse claims this is a computer issue. SOMEONE HELP!
Yes my computer is updated.Hi..
If you are using Safari, from your Safari menu bar click Safari > Preferences then select the Appearance tab.
Make sure the box next to: Display images when the page opens is selected.
If that box was already selected, back to the menu bar click Safari > Empty Cache
If that doesn't help, try Safari > Preferences > Privacy
Click: Remove All Website Data
Quit then relaunch Safari to test. -
Question mark in the upper left corner of finder
Hey,
I have just installed a bigger harddisk and more ram in my MacBook Pro (from last year).
Now there is a question mark in the upper left corner of finder. If I click on it, there is a message : the object doesn't exist, well my message is in danish, but I think this is a close translation. So what is happening?
Regards StigControl-click it and choose to remove it, or command-click it and drag it out of the title bar.
(38394)
Maybe you are looking for
-
Can A synonym be used in Discover?
I am new to this tool and I have a schema with all objects that I need to develop my discover application, however, all these objects will have to be move to a different schema. I gave select,update, delete grant to the schema that I am going to use
-
APPLLCSP Environment Variable Problem
Gurus- How do I resolve this issue? I checked the Tk2Motif_UTF8.rgb file and I don't detect any errors. This btw, was generated as a result of a seeded report. Thanks APPLLCSP Environment Variable set to : XML_REPORTS_XENVIRONMENT is : /apps1/applmgr
-
Hi there, I'm currently writing my first filter plugin for Photoshop (win 32 CS5 SDK) and I'm facing a problem to disable (unreachable and greyed in menu) my plugin on undesired image modes. My intention is to only enable my filter when document is i
-
Updation of MCHB-CLABS value on Post Goods Issue through VL01n
When POsting Goods Issue I need to change MCHB-CLABS value. My requirement: When quantity left in the stock is less than (MCHB-CLABS) .005 I am adding the remaining quantity left to delivered quantity, but the stock (MCHB-CLABS) is not getting upd
-
i dont know what to do