Grey screen appears during normal use

I have never seen this before and the other discussions seemed to be more about restart.
Normal startup, normal login and possible to use the iMac normally for a random but short period then all of the sudden grey screen. Blank grey screen.
Reset PRAM and smc, Verified Disk (OK), checked and fixed one permission and there is a lot of free space.
Does anyone have any other ideas that I could check.
Much appreciated

Hello,
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Similar Messages

TS2570 what to do grey screen appears during startup

anyone else having trouble booting from osx install disk after replaceing hard disk?

Hello,
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

T61 stopped during normal use

My T61 got locked during normal use and I had to press the power button to force it to power off. After that when I try to power on again nothing appears in the screen . I can see that the LEDs of the HD are blinking, Bluetooth is also "on", but no message or sound.
If I press any switch in the keyboard for long time the buffer gets full and It emits a beep sound, so looks like something is working.
Also, I can not access BIOS during the start-up.
Does anyone can help to solve this problem?
Thank you in advance!

I've helped dozens of members solve the problem, you'd need a board that isn't affected with this problem. They are rare but can be obtained. If you'd like me to check what is available you can send me a PM and we can discuss it. I also have a test you can do that may help to confirm if it's actually the gpu
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

MacBook Pro won't boot. Grey Screen appears, apple logo then nothing

I'm very frustrated. I was using my laptop and suddenly the rainbow wheel appears and it freezes. I tried to hard reboot it and when it restarted a grey screen appears and the apple logo shows up. I bought it used from a Micro Center and I believe it's out of warranty. What is going on and what are my options?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 4
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Imac reboots & grey screen appears with no further activity

I have a 2011 late edition iMac with 12 GB RAM, running os 10.6.8. I press the power button. The iMac chimes. Grey screen pops up and just sits there. No apple logo. Don't hear any hard drive activity from the iMac. Any suggestions? I have tried to boot up from the DVD drive, but nothing happens. Thanks in Advance!!

Hi Dr.Yoda69,
Thanks for visiting Apple Support Communities.
If your Mac only starts up to a gray screen, I recommend trying these steps next:
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Perform a Safe Boot
Simply performing a Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
Reset the NVRAM / PRAM
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Reset the NVRAM / PRAM.
If the gray screen issue persists, go to the next section.
You can find this information and additional troubleshooting sections here:
Mac OS X: Gray screen appears during startup - Apple Support
All the best,
Jeremy

HT4177 My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
Good Luck and report back all what you tried.
Also report what change occured before this tragedy happened, was there a Software Update? A EFI firmware update? Etc.
https://support.apple.com/kb/TS3148
more:
https://support.apple.com/kb/TS2570
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
To use Safe mode, hold down the Shift Key while booting.
Other assistance
https://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379
https://support.apple.com/kb/ht1782
https://support.apple.com/kb/HT1564

Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart

Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart. Here is my recent crash report. Please help me.
Anonymous UUID:
714EBD8C-083D-E200-A9BD-6F925A8F8F14
Thu May 29 22:30:04 2014
panic(cpu 0 caller 0xffffff80026dbf5e): Kernel trap at 0xffffff80026d1197, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffef8022f973c8, CR3: 0x0000000089778000, CR4: 0x0000000000000660
RAX: 0x000000000000001c, RBX: 0x00000000e00002c2, RCX: 0xffffff8002abb7d4, RDX: 0xffffef8022f973c0
RSP: 0xffffff800d2cb6a0, RBP: 0xffffff800d2cb6a0, RSI: 0x0000000000000001, RDI: 0xffffef8022f973c0
R8: 0x0000000000000001, R9: 0x0000000000000001, R10: 0xffffff8014ea65e8, R11: 0xffffff809b3160f0
R12: 0xffffef8022f973c0, R13: 0x0000000000000001, R14: 0xffffff800d2cb6ec, R15: 0x0000000000000001
RFL: 0x0000000000010202, RIP: 0xffffff80026d1197, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef8022f973c8, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff800d2cb330 : 0xffffff8002622fa9
0xffffff800d2cb3b0 : 0xffffff80026dbf5e
0xffffff800d2cb580 : 0xffffff80026f3456
0xffffff800d2cb5a0 : 0xffffff80026d1197
0xffffff800d2cb6a0 : 0xffffff80026afd0e
0xffffff800d2cb6d0 : 0xffffff8002abb751
0xffffff800d2cb710 : 0xffffff8002abb54f
0xffffff800d2cb760 : 0xffffff7f8413fd2f
0xffffff800d2cb7a0 : 0xffffff7f84188b21
0xffffff800d2cb7e0 : 0xffffff7f841708d2
0xffffff800d2cb850 : 0xffffff7f84170fc8
0xffffff800d2cb890 : 0xffffff7f8413dfea
0xffffff800d2cba10 : 0xffffff7f8416d940
0xffffff800d2cbad0 : 0xffffff7f8413cad9
0xffffff800d2cbb20 : 0xffffff8002acea56
0xffffff800d2cbb40 : 0xffffff8002ad0051
0xffffff800d2cbba0 : 0xffffff8002acdabf
0xffffff800d2cbcf0 : 0xffffff80026b66a8
0xffffff800d2cbe00 : 0xffffff8002626bf1
0xffffff800d2cbe30 : 0xffffff80026139f5
0xffffff800d2cbea0 : 0xffffff800261e043
0xffffff800d2cbf20 : 0xffffff80026c975d
0xffffff800d2cbfb0 : 0xffffff80026f3a28
Kernel Extensions in backtrace:
com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f84 12b000->0xffffff7f841f5fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f82cbe000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f8324b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f83208000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f8325b000
BSD process name corresponding to current thread: Skype
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:
0x0000000002400000
Kernel text base: 0xffffff8002600000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 60200033152435
last loaded kext at 44797399467641: com.apple.filesystems.smbfs
2.0.2 (addr 0xffffff7f84b15000, size 335872)
last unloaded kext at 15796237223278: com.apple.macos.driver.AppleUSBEthernetHost
7.0 (addr 0xffffff7f84b15000, size 20480)
loaded kexts:
net.telestream.driver.TelestreamAudio
1.1.0
com.rim.driver.BlackBerryUSBDriverInt
0.0.97
com.apple.filesystems.smbfs
2.0.2
com.apple.filesystems.ntfs
3.11
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM
100.14.15
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.6.1f2
com.apple.driver.AppleMikeyDriver
2.6.1f2
com.apple.GeForceTesla
8.2.4
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AudioAUUC
1.60
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.4f1
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleIRController
325.7
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.iokit.SCSITaskUserClient
3.6.6
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
5.0.2
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.nvenet
2.0.21
com.apple.driver.AppleUSBOHCI
656.4.1
com.apple.driver.AppleUSBEHCI
660.4.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
217.92.1
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
217.92.1
com.apple.AppleGraphicsDeviceControl
3.5.26
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.6.1f2
com.apple.vecLib.kext
1.0.0
com.apple.driver.AppleHDAController
2.6.1f2
com.apple.iokit.IOHDAFamily
2.6.1f2
com.apple.nvidia.classic.NVDANV50HalTesla
8.2.4
com.apple.nvidia.classic.NVDAResmanTesla
8.2.4
com.apple.iokit.IOAudioFamily
1.9.7fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSurface
91.1
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.4f1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.7.0d11
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.6
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.1
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.driver.NVSMU
2.2.9
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOUSBFamily
677.4.0
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.pthread
1
com.apple.kec.corecrypto
1.0
System Profile:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

riyazfrombangalore,
your 13-inch Mid 2009 MacBook Pro requires 1066 MHz RAM, but you have 1333 MHz RAM installed. Try replacing the 1333 MHz RAM with 1066 MHz RAM — Macs can be picky about the RAM which they find acceptable.

IPod passes Apple battery test but only lasts 2hrs during normal use

I have a 1st generation iPod mini; the battery has been acting up lately. I have done Apple's battery test a few times; each time the battery lasts for 6-8 hrs. However, during normal use, it lasts only 1.5-2hrs, even after a full charge.
I have this problem even when the backlight and the EQ is off. Also, the battery dies, even though the battery meter is half full. If I immediatly turn on the iPod, the meter is empty, but after 20 min, it's half full again. When I try to play music, it turns off.
On top of this, the battery takes a minmum of 8hrs to fully charge!
Please help...!

My ipod mini 2nd generation was like this too.. it would reset itself resetting the time also for no reason every 20mins.. and it wouldnt hold a charge.. i sent it in thursday and i should get it back this week.. if your ipod is in warranty.. send it back asap!

When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (more) for it to load to finish restarting the Mac. What should I do?!

When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (or more) for it to load to finish restarting the Mac. What should I do to fix it?!

Disconnect all devices from your computer if you have not already done so. Restart again. If the problem has been resolved, you had a peripheral conflict. You will then have to reconnect the devices one at time, restart, to locate the culprit.
Login Items is another culprit. Check your login items.
System Preferences>Accounts>Login Items
Delete/disable all you do not need or want.

Movie won't play in timeline - grey screen appears, Movie won't play in timeline - grey screen appears

Movie won't play in timeline - grey screen appears, Movie won't play in timeline - grey screen appears
Should I just restart the computer?

That would be a start!
Post back if it didn't work with further details of what movie this is, and what version of iMovie.

Gray screen appears during startup

I have a later Mac Mini with 10.8.5. installed where the gray screen appears during startup. Have regularly backed up the disk except the last 2 days where I installed some important pictures which unfortunately were deleted on the camera.
Have now followed the following steps under support.apple.com/kb/TS2580
1) Disconnect, test peripheral devices and network cables
Didn't solve the problem
2) Perform a Safe Boot
Didn't solve the problem
3) Reset the NVRAM/PRAM
A menu showed up , I checked the disk, didn't show any problems
Then I restarted the Mac and the same problem showed up.
What's the suggestion for next step and minimizing the risk of deleting the pictures which I don't have backup on ?
Help would be greatly appreciated.

Sorry - the support link should be http://support.apple.com/kb/TS2570

Black Screen Appear during Operating System normal usage

Hi!
I have a Compaq Presario CQ50-102LA, the problem that I have is that when I try to use the operating sytem a black screen appears(sometimes the sreen is blue or red or green)
I thought that the problem was with my Operating System, but I tried installing Ubuntu, Win Xp and Win7 and the problems persists..
I made the hard disk and memory tests from the BIOS and it was OK.
I also tried disconnecting the wireless card and the CD/DVD drive bit didn't work...
I don't know what else to do.. I'll really appreciate if you could help me!!
Thanks

Follow up on previous post..
If it says that there is no hard drive detected, it means that it cannot find any hard drive connected on the computer to install the OS to.
So first, test your Hard drive if it is detected in SetUp or BIOS, by tapping F10 on boot up. You'll have a HD test utility under diagnostic.
If it shows that "No IDE device found"
Reseat the HD, check this website to know how to reseat your HD
http://h20181.www2.hp.com/plmcontent/NACSC/SML/
If it shows in the test that its detectecting the HD and doing the HD test. Try different installation disk, or might need the original Recovery Disk for the notebook.
Sig: A user told the computer: "Cant you do anything right?!!"
The computer wants to say to the user: 101010101010 (meaning: "cant you do anything right?")

I restarted my macbookpro but it doesn't start again. It starts to run and a grey screen appears bus after a few seconds it shuts down. Please help. I can't find anything online

Help me please just a grey screen with the apple logo appears and it looks like its going to start up but doesnt

See if you can boot into safe mode by holding down the shift key immediately after pressing the start button. Keep holding the shift key till a loading progress bar appears on the lower part of the screen. It will take a lot longer than normal to start this way. If you have Lion 10.7 installed you can try holding command-R keys to get intto recovery mode and run disk utility.
If you want some great tips on trouble shooting go to this link to frequent poster ds store's page.
ds store's User Tips https://discussions.apple.com/people/ds%20store?view=documents
This one covers your problem https://discussions.apple.com/docs/DOC-3392

Grey Screen of Death after using Migration Assistant

Just got a new iMac 27" i7 today. Starts up fine until running migration assistant. After which shortly after the grey apple logo appears I get the Grey Screen of Death™ saying I need to restart the computer. Restarting does not help, running Disk Utility from the startup disk does not help. Checked for bad ram, not the ram. Unplugged and let sit for 10 minutes. Nothing. Erased drive, reinstalled OS, started up fine. Ran Migration assistant again, focusing on apps only, not settings. GSOD™ again. Currently I'm reinstalling the OS after erasing the drive again.

I see, using MA over a wireless network isn't highly recommended as it literally could take days or even a week to wirelessly move GB's of data over wi-fi.
However I'm glad you figured out the problem. The problem with Quicken 07 may be that it relies on Rosetta to run on Intel based machines. Unless you have Rosetta on your new iMac that could have been the problem however I"m not sure why. As it turns out I also use Quicken (dreadful software!) and used MA to move it to another machine however my installation went smooth as silk. When I first started Quicken on the new machine Snow Leopard sensed I didn't have Rosetta and prompted me to download it which I did.

Grey screen appears during normal use

Similar Messages

Maybe you are looking for