Grey screen/ flashing question mark folder help!

my macbook starts up into the grey screen (no logo or indicator) and will eventually go into the flashing folder with the question mark. After hours of scouring forums I have tried the following things:
restart holding c with install disc in -> macbook spins disk, thinks, ejects disk
restart holding option -> grey screen, this time with movable cursor, does not advance from there. i left it for about ten minutes- should i leave it longer?
reset PMU as per Apple article -> no effect
reset PRAM as per Apple article -> no effect
i'm beginning to become resigned to the fact that it might be an HDD issue. i feel as though i should still be able to boot from disc. i could be wrong. just wondering if anyone has ANY other suggestions before going to Apple for repairs.

If the computer is under warranty the cost is carried by Apple. If it isn't, here's what I'd do...then again, I'm a tech and have access to lots of equipment. First I'd remove the drive (easy to do. turn off the computer, remove the battery, remove the little gate, remove the drive. The instructions are in the little booklet that came with the computer) and put it into an enclosure, connect to another computer and run drive diagnostics. If the drive can be repaired I'd format it, clone from my backup, and return to the computer. If the drive is dead I'd buy a new drive, clone from my backup, and be back up and running. There's a third, remote possibility - that the problem is the logic board and not the drive. But it is remote.
What I'm getting at here is that yes, you can do it yourself but...you probably don't have an enclosure for a 2.5" drive so you'll probably just have to assume the drive is toast and buy a new one - check out NewEgg or Macsales.com. Without the external drive enclosure you give up the chance of restoring the drive and recovering data. Then again, if you can't anyway you'll have wasted $$$ on an enclosure you didn't need.
Instead of worrying about what you've heard, call the local store and get a quote on replacing the drive and installing a drive that you bring yourself. That'll give you a ballpark figure to work with and you can move forward from there.

Similar Messages

MacBook shows grey screen and question mark folder on startup.

Have tried different things that have been suggested....reboot PRAM holding down option command P R etc but nothing yet has worked. Don't have installation disk as MacBook is 9 years old so must've thrown disk out years ago. Any ideas?

Mac OS X: Gray screen appears during startup
and since you'll probably need it http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

TS2570 i have an intel imac and im getting a grey sceen. I get the flashing question mark folder. iv changed the H.D 2x and tired to install a new os into it but no luck. The mac isnt going into safe mode or anything. help?

Intel imac 2009. Grey screen with question mark folder. Changed harddrives 3 times now. Tired 5 keyboards on all Usb ports and a hub and keyboard wont boot to startup or safemode of anything but hub gets power. disc drive wont eject or accept a disc cuz keyboard commands not being sent to computer. Help?

Keyboards must be connected directly to the USB port, not through a hub.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

HT1310 I have a macbook pro about 4 years old. I can't get it to open past the flashing question mark folder. However, I just tried to hold down the option key and the question mark disappeared. Still, nothing...the light is on the screen but nothing e

I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears. Nothing beyond that point....help?

There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How do I fix the GRAY boot-up screen with FLASHING QUESTION-mark FOLDER?

When I turn on the MacBook Pro laptop, I opened up the Safari Browser and its when the problem started. It was stuck on an loading infinite loop. I decided to force quit the application and/or turn off the mac by the Menu options, It did not work. So I did a "Hard" Shut-down and restarted the Mac, the Boot up screen stood gray for like a minute until the Flashing ? Folder icon showed up!.
My sister's laptop's warranty is expired so I wonder how can I fix it without having to spend too much money on a simple troubleshooting tip.
How can I download/create a boot-up Disk/Flash Drive so I can reset it to factory settings?
I cannot access the laptop because It's kind-of software bricked if you ask me. Also, I do not know how to check the Mac OS version outside of the "About Mac" menu. I do have another Mac which is a desktop computer with a CD drive.
I would appreciate some expertise on this issue a.s.a.p. Thank you!

Ok, now I am stuck:
Why does my Mac boot its OS from the Flash Drive instead of the INTERNAL HARD DRIVE???a
If I start up my MacBook Pro, It will have the flashing question mark folder UNLESS i plug in the OS-Boot flash drive. When I at the desktop screen and work on a program, When I unplug the Flash drive, THE OS WILL CRASH AS IF I TOOK it's soul (OS x Lion) out of the body (MacBook Pro Laptop)
this is frustrating because when I did the INTERNET RECOVERY, When I install OS x Lion, the Flash Drive only show up as an option as opposed to the HDD.
I cannot format the hard-drive in DISK UTILITY because it's grayed out. This is just frustating. I never had problems with PC Windows OS recovery but this (Mac OS).

Flashing question mark folder on macbook pro startup. PLEASE HELP

I have a MacBook Pro which I think is a 2011 version. When I startup the computer it comes up with the flashing question mark folder. I can't start it up via disc as I do not have the disc that came with the mac :( .

Di you try restarting and booting whilst holding down the command and R keys? Or even the command, option and R keys (assuming that you've a 2011 model)?
Some 2011 models came with discs as they shipped with Snow Leopard. Those that shipped with Lion had no discs. If your machine originally shipped with Snow Leopard, you can call Apple, with the serial number of your MBP handy, and order a set of model-specific discs (cost is, I believe, around $25 with taxes and shipping).
Please 'call back' and let us know if you've tried booting either to your Recovery partition or to Internet Recovery.
Clinton

Flashing question mark folder- Mac Help instructions arent working

My computer froze yesterday and when I re-started it, it had the flashing question mark folder.
I tried all of these steps http://support.apple.com/kb/ts1440
and these steps http://support.apple.com/kb/TS2570
I can't get anything to pop up upon start up other than the folder (ie when I hold down the C key with the Instal DVD in it thinks for a minute, spits out the DVD and the folder comes back).
If anyone has any ideas I'd greatly appreciate it. I'm even fine with erasing my hard drive if need be, I just want to get the computer back up and running.

You can go no further unless you're able to boot from your installation DVD. If your machine came with Snow Leopard installed, that would be the gray disc that was in the box. If you upgraded to Snow Leopard, then it would be the retail disc you used to upgrade. No other disc will work.
With the machine powered on, insert the disc. Hold down the power button until it shuts off. Press the power button again to turn it back on, then immediately hold down the C key. Keep holding until you see the Apple logo on the display.
If this procedure doesn't work for you, and you've done everything you say you've done, then you have either a hardware fault or a damaged disc.

HT201250 Flashing question mark folder

When I turn on my mac book a grey screen appears with a flashing question mark folder.
If I hold down the option key when I turn it on I get place my wifi password in and click on an arrow for Internet recovery.
Once the Internet recovery completes which took about 3 minutes I am then given the option to select my language the taken to the Mac OS X Utilities. There are 4 options:
1. Restore from time machine back up
2.reinstall Mac OS X
3.get help online
4.disk utility
Mac book pro information
Intel core i5
Mac OS X 10.7.5
Hoping someone can help and lead me in the right direction to fixing this!!!
Thank you

First of all, do you have backup of all your data? If not you may want to stop any troubleshooting until you have got that covered for fear of making the situation worse.
Assuming you do have backup, from your first post, where you started in Recovery mode, did you run Disk Utility (option 4) to see if it could discover/fix any problems? If not, open Disk Utility, select Macintosh HD on the left and click on 'repair disk'. If anything gets changed/fixed/altered, click on repair disk again until you get a 'clean pass' and then restart as normal from the Apple menu.

IMac won't boot - flashing question mark folder

Hi, I was having performance issues with my iMac, so after searching for a resolution, I followed some suggestions to reset the PRAM and SMC....after resetting the PRAM it will not boot up at all! The startup sound chimes, then a blank grey screen briefly before a flashing question mark folder appears. Nothing happens..... I have the install cd, but there is a CD in the drive and I can't get it out. Help!!
Thanks in advance....
Andrea

HI Andrea,
To get the disk to eject, start the iMac while holding down the mouse button.
A flashing question mark appears when you start your Mac
Try booting while holding down the Option key.
Carolyn

Flashing Question Mark Folder on Start-up

I recently starting having administration issues with my Mac Mini.
I went to update to OS 10.5.7 and when the administrator box came up asking for my password, my name was missing. After putting in the correct information, was unable to update, but received the message what my clue to password was.
Anyway, I performed a safe startup, changed the password and tried again. Same issue as before. So I started up from the Start Up Disk, and ran Disk Utilities and verified the disk and repaired any permission issues. When I started up my Mac Mini from the hard drive, I still did not have my administrator password working.
At this point, the start-up ping is gone.
I reset the Pram and had the same issue. So, I saved all important files to an external hard drive and tried to do a clean install. I was unable to do the clean install.
I removed the hard drive from my Mac Mini and installed it into a friends Mac Mini. I had complete control of my computer with no administrator password issues, the ping was there, and I could reload all saved items and still not have any issue no matter how I started up the computer. I then performed a complete erase and reinstall and still had no problems.
I reinstalled the hard drive into my Mac Mini, and I now have the Flashing Question Mark Folder with gray screen on start-up and no ping. Can't fire wire to start up, can't clone, can't start-up from disk, safe mode, etc..
Any ideas would be helpful. Most likely I will be going to the Apple Store and seeing what they can do.

generally, the flashing folder mark means it can not find the startup drive.
if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

IMac with flashing Question-Mark Folder

I've read all of the help on the flashing Question-Mark Folder. Nothing has helped. In fact, Disk Utility only finds 'Disk 0' with the base OS X operating system. All of the disk utility buttons are grayed out and at the top on the left of is 'Media' (not disk drive - not formatted?). When I try to recover from the internet and re-install OSX Maverick, it can't find a disk to install on. Does anyone know what happened and can this be fixed?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Boots to flashing question mark folder and disc utility cannot locate internal hard drive

Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!

It was the internal HD cable. I replaced it and now my MacBook Pro works

Persistent Flashing Question Mark Folder Icon, after Repair & Rebuild-THX!

Hello All,
Thank you in advance for any insights.
For the past week, one/two days after a force re-boot, my Quicksilver Mac (OSX 10.4.11 and OS 9 Classic) starts up with the dreaded flashing question mark folder.
The start up disk has always been on "Mac OS X, 10.4.11 on main stuff" ("main stuff" is the name of the hard drive.)
The first time, I ran DiskWarrior and rebuilt the hard drive, which is kind of new as it was replaced in April 2009. Then I ran OnyX and got a clean bill of health. The Mac was shut down at the end of the day as is my habit via turning off the power strip.
If it helps, here's part of the DiskWarrior report:
• 13 files had a directory entry with an incorrect text encoding value that was repaired.
• 340 files had a damaged extended attribute that was repaired.
• 3 folders had a directory entry with an incorrect custom icon flag that was repaired.
• Incorrect values in the Volume Information were repaired.
Disk Information:
Files: 370,719
Folders: 85,161
Free Space: 92.55 GB
Format: Mac OS Extended (Journaled)
Block Size: 4 K
Disk Sectors: 268,171,472
Media: WDC WD5000AAKB-00H8A0
The next day, the flashing question mark folder reappeared. This time I used the original system installer CD (labeled Power Mac G4 OS X Install). Disk Utility made its repairs. And this time, the computer was put to sleep instead.
In the morning, it woke up, the wireless optical mouse worked for a few seconds, the hard drive is humming along then all of a sudden the arrow (mouse) froze and none of the keys on the keyboard functioned.
After some research, I deleted the energy saver preference (powermanager.list?) and ran Disk Utility again. And again, I shut down b/c I wasn't going to use the Mac for a day or two.
This afternoon, the pesky icon reappeared at start up. At first Disk Utility didn't see the hard drive then I restarted and the hard drive was selectable though not mounted. It was repaired and verified yet once again. Btw, when I did hard drive test, the message says something to the effect that it appears to be working properly.
My question is, might anyone know what's wrong? I've been backing up after every use and I have a laptop. But I love working on the desktop and if this issue can be fixed, that would be perfect.
As an aside, I've read that I should do a clean install. Would doing a clean install mean I need to re-install OS 9 as well as all other all other software programs-Adobe Creative Suite, Quickbooks, Verizon DSL, printer drivers etc.?
One final question, can I continue to boot up from the CD, repair then restart or will I damage the computer? Once it restart, everything seems to work normally and well.
Many, many thanks for reading and any help would be greatly appreciated!
Have a wonderful weekend.
Sam

Disk damage can also affect the startup sequence, but I think what you have already done should have repaired any disk damage, or given you more information.
Once you have ruled out Disk damage, you get the flashing question mark when your Mac cannot find:
• the preferred operating System
• of the preferred version
• on the preferred startup drive.
All these items are stored in the parameter RAM, backed up by a 3.6 volt, non-recharging 1/2-AA size battery that lasts three years or so, unless you turn off all power at night.
If you cannot remember when you last changed that battery, now is a good time. Be sure to reset the PMU/PRAM after installing the new battery.
Message was edited by: Grant Bennet-Alder

Flashing Question Mark Folder... with a twist

Hi all, I hope you can help me out.
A month ago I had some trouble with my MacBook. It would continually freeze, then when I restarted it would show the flashing question mark folder icon. When I booted from the OSX CD it couldn't see any drives to install to. Restting the PRAM eventually fixed the issue, but only temporarily: it kept doing it and eventually it seemed that the hard drive was well and truly dead.
I took it to my Mac shop and they replaced the hard drive for me as it was still under my Applecare warranty. Things seemed fine for a couple of weeks.
Then it happened again. Now it seems to have skipped the stage where resetting the PRAM would fix things and has gone straight to the signs of a dead hard drive. I find it hard to believe the replacement drive has died after a couple of weeks. Is there some other issue, such as a faulty motherboard, which could be killing hard drives?
My MacBook is a Core 2 Duo 2.0, with 2GB of RAM and 200GB hard drive, running the latest version of OSX.

I had this happen to my MB a few weeks after purchasing it last November. I took it to the Genius Bar at my Apple Store, and the Genius took my HD out to test it, and said that it had completely locked up, and he wasn't able to get it to load on at all, and that it was dead. They sent it away for me, I got it back a couple days later with a brand new HD, and I haven't had a problem since.
My lesson learned: Backup, Backup, Backup!!! I use Apple's Backup App because it came w/ my .Mac account, but there's plenty of other great Backup Apps out there. Have one or more External HDs set up as backups in case anything happens to your internal, and remember a computer is a computer and sometimes they have problems. However, it does sound like Apple invested in a bad lot of HDs. If it's happening to a lot of people, report it to Apple. There may need to be a recall.

Grey screen/ flashing question mark folder help!

Similar Messages

Maybe you are looking for