Grey screen in v9 using Windows 7 64 bit and Serious Error

Hi,
Whenever I try to create or open an existing project, I get a grey screen with the menu bar at the top. The majority of the menu selections are disabled. I also frequently get an error message 'Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down, We will attempt to save your current project.'
Here's the specs on my system:
Windows 7 Home Premium N 64 Bit OS
Intel Cpre i5 CPU 750 @ 2.67 Ghz
Installed memory (RAM) 4 GB, 1.99 GB usable
I've had these problems since buying/installing the software earlier this month, however they were intermittant. I did a complete reinstall this morning and now I get these errors every time. I should point out that the Radeon graphics card disables control over graphi acceleration.
I need to make a movie for my son's college application this week, so any tips on resolving this would be greatly appreciated.

Another poster recently had an issue where he had 12GB ram installed but windows showed only 8GB usable. He pinned it down to some of his RAM chips not being fully seated in the mother board connectors. As you are also receiving 'usable memory' less than installed memory that may be a good place to start. You can download a free checker here: http://www.memtest86.com/. You can also buy the product on CD, but that's not necessary unless you are unable to create a boot disk from a disk image file.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Flash stopped working. Updated and enabled to no avail. Am using Windows 7 64-bit and IE10.

Flash has stopped working. Updated and enabled to no avail. Am using Windows 7 64-bit and IE10.

Pat Willener wrote:
What exactly means "stopped working"?
It had been working on my computer through the different versions of IE for years. I then noticed a few days ago that numerous reliable sites told me to install Flash. I confirmed that it was installed and enabled but all attempts to reinstall resulted in the same condition; Installed under "Programs" ans enabled under "Manage Add-ons". However I still couldn't get it running and Adobe's "Check Now" site showed it NOT installed or enabled. The only thing I can think of that might have had an effect was that I returned to IE10 recently after having some problems with IE11.

Install ITunes on A Windows 7 64 bit and get error message

I am trying to install ITunes on A Windows 7 64bit and get the following error microsoft.vc80.crt,version="8.0.50727.4053",type="win32",publickeytoken="1fc8b3 b9a1e18e3b",processorarchitecture="x86"HRESULT:0x8007054F

Are you using the 32 or 64 bit version? There are two versions of iTunes. One is for 64 bit processor architecture, one is for 32 bit processor architecture.
Please download the 64 bit version and test it! In my view you try to install the 32 bit version.
Kind regards!
Philipp
EDIT: I am sure you currently try to install the 32 bit version! It doesn't work on a 64 bit system. Are you sure that you use Windows with 64 bit?

Cannot print pdf file using windows 7 64 bit and trial acrobat X

cannot print pdf files using trial version of Acrobat X and windows 7 64 bit prints all other files no problem.
I've done some searching but can't find anything that helps
Thanks for any help
Kim

I fixed this problem. I had to turn off the browser virtualization feature in Zone Alarm Extreme Security. This wiped out all of the Firefox settings, but I had bookmarks, etc. backed up. (answered by original poster)

Photoshop CS6 x64, Windows 8 64-bit and an error in my display driver

So I have 64-bit Windows 8, 64-bit Photoshop CS6 and an ATI Radeon HD 4770 GPU. When I go to the settings in PS, it tells me that there is a problem with my display driver so I cannot use GPU graphics processing. I would really like these features to be available to me, especially since my GPU meets the recommendations by Adobe. I installed the latest driver from AMD. What am I missing?

Might want to read this link about uninstalling driver http://forums.adobe.com/thread/1142340?tstart=0

Using windows 7, 32-bit and HP laseerjet 1000, I cannot print from internet. Error message 20

This problem just started last week. I can print off-line, but fet the message "printer not activated - error code 20" when I try to print off the internet.

That's an HP error code. Firefox uses 3 digit error codes.
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00759728&product=1142684
http://www.printertechs.com/tech/error-codes/error-codes-20-49.php

I cant get Firefox to download any files including updates. I get an error saying "Windows has closed the filepicker unexpectedly" and Firefox freezes. I use Windows 7 64 bit and I have the error in Firefox 7. Any help much appreciated.

At any attempt to download even update I get an error that says "Windows has unexpectedly closed the file picker".

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

Using Windows 8 64-bit and downloaded itunes 11 but when i run the installer it says "this app can't run on your pc".. any help?

Any Help with this? Very frustrating

Clear your browser cache and try downloading again. Make sure you get the 64 bit installer.
tt2

I can't stay signed in to any site. I have windows 7 64-bit and firefox 3.6.3

I cannot stay signed in to any site. It will remember my password but will not keep me logged in. I am using Windows 7 64-bit and Firefox 3.6.3
I have deleted my cookies and the cookies.sqlite file in the profile folder.
== This happened ==
Every time Firefox opened
== since I got windows 7

Websites remembering you and automatically log you in is stored in a cookie that you must allow: Tools > Options > Privacy > Cookies: "Exceptions"
Make sure that you do not use [[Clear Recent History]] to clear the 'Cookies' and the 'Site Preferences'.
See also [[Cookies]]

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
any help would be greatly appreciated, thanks

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on.

hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on. I Can`t press any button.My Mouse still works. Battery is charged. Alt-cmd-escape doesn`t work It even after a forced shutting off, the problem is the same.   what should i do? Thank you for your help.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
     a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. The battery is distinct from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Ipod touch wont show up in usb or itunes help pages just bring me in circles. how can i get it to show up. I use windows xp at home and tried everything then tried a relatives computer using windows 7 and still nothing. this is an older ipod touch

the help pagers just bring me around in circles. the ipod doesn't show up in system devices under the busses. i've tried just about everything. Im using windows xp at home and though maybe it was because of that. so went to a relatives and used a brand new lap top avus with windows 7 and it wont show up here either. When i got the ipod a few days ago from a third party the only screen i could get to come up was a picture of a usb cord with an arrow pointing towards the itunes logo. I downloaded i tunes and couldn't get it to change. brought it to at&t store today they hooked it up with my usb cord to thier computer and suddenly the menu screens work and i could even get online with it yet when i try to hook it up to one of my computers it doesn't show up anywere where can i go to get this fixed and fixed quick jumping around the apple help pages have put me in a foul mood and im sick of it two days spent trying to get it to show now. im sick of waiting around i need help asap so i can return this **** thing if it turns out it is broken somehow..which i dont think it is.

What gen iPod (3,4?) did you buy?

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Grey screen in v9 using Windows 7 64 bit and Serious Error

Similar Messages

Maybe you are looking for