Greyed out backups in Time Machine

The Time Machine disk became too full to operate its next backup, and all the old backups became greyed out in the display. (Maybe it had something to do with TM running whilst I was using Parallels).
I moved a folder of files to trash to create space; Time Machine didn't recognise space being freed up; I emptied the Trash, and the space was then found and TM backs up normally again.
But all the backups prior to the 'too full' incident still appear as only greyed out.Is there any way I can see them again?
Help would be appreciated.

ccrm wrote:
The Time Machine disk became too full to operate its next backup, and all the old backups became greyed out in the display. (Maybe it had something to do with TM running whilst I was using Parallels).
I moved a folder of files to trash to create space; Time Machine didn't recognise space being freed up; I emptied the Trash, and the space was then found and TM backs up normally again.
Do you mean you went into your backups with the Finder and deleted some things? If so, your backups are now corrupted. Unfortunately, Apple doesn't do a very good job of warning folks not to change, move, or delete anything in Time Machine backups via the Finder. They do provide a way to delete things, but don't make it real obvious. See #12 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
But all the backups prior to the 'too full' incident still appear as only greyed out.Is there any way I can see them again?
You might be able to repair them, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum). But I wouldn't trust that they're complete.
If the repair works, and you can see the backups, they may be ok. If so, post back and I'll recommend another step to be sure. If not, your best bet will be to erase the drive and let Time Machine start fresh.
Part of the problem may be if Time Machine is backing-up your Parallels virtual machine. To OSX, that's one monster file, and any change to it, no matter how small, results in a new backup of the whole thing, which of course can rapidly fill the disk. You should exclude it from Time Machine, per #10 in the FAQ, and back it up separately. I understand the 3rd-party WinClone app is good for that.

Similar Messages

I bought a new external hard drive for backups, but time machine won't do a full back up. I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?

I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done? Why did this happen, the overloading of the Time Machine?

Why has the TimeMachine drive run out of space?
With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
Will you have this problem with a 3TB drive?
I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
Moving Forward
Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

I cannot select a previous backup on time machine

I'm trying to upgrade my girlfriends mac to the latest OS X but she asked me to pull out some files for her and save them on a flash drive for her first. The files aren't on the Mac now but should be in previous backups.
Her mac has been connected to my time capsule from the very first day she got it so all her files should be saved on my time capsule.
When I entered time machine to find those files, I was only able to go back a few months "her Mac has been backing up for about a year and a half now"
I can see the purple stripes on the right in time machine that go back way before the oldest point that I can access, but the lines are kind of shaded and I can't click them! So it seems like the data is saved and the time capsule is recognizing the Mac but for some reason I just can't select the earlier dates!
So to sum it up
I'm trying to access older backups but when I enter time machine the backups I want are shaded and I cannot select those dates
So far all I tried was to reset the Mac and I did a "hard restart" on the time capsule by disconnecting then reconnecting the power.
Has anyone had a similar issue? What can I do to access those shaded backups?

Time Machine - Troubleshooting E2. I can't see some backups

Can't browse some older backups via Time Machine interface

Problem started after updating to Yosemite. I am running 10.10.1. I can find all my backups, going back to 2010 in fact, when browsing my external FW800 hard drive directly in the Finder. But if I click the menubar icon and choose "Enter Time Machine," I can see some recent backups for some folders, but I cannot access some older backups that I know are there on that same drive. The window title bars in the TM interface are totally grayed out for those older backups. But again, there are all on the same FW800 external HD, and I can search them just fine and extract the files just fine using the Finder.
Is the Time Machine interface totally broken in Yosemite?
Clearly there is nothing wrong with my external FW800 HD, otherwise I wouldn't be able to manually browse and extract files via the Finder. And yes, it makes regular TM backups every day too. It's only the "Enter Time Machine" UI that is partly broken. I say "partly" because some backups (very recent) display, but I cannot access all the backups. It's very strange.
Any thoughts would be appreciated.
Thank you.

We need some clarification on what your requirements might be, since you state that you want to be able to open Time Machine and see backups that were made since you installed Yosemite.....AND....older backups on the drive that were made before you installed Yosemite.
When Yosemite is installed it is supposed to add all of the data included in the Yosemite operating system and combine that with your history of backups with other operating systems. For a number of reasons.....Yosemite does not always do this.....so what happens is that Yosemite starts a whole new "master" backup of your Mac at the time and then begins to add incremental backups since Yosemite has been installed.
When that happens, and you click Enter Time Machine from the menu bar at the top of the screen, you will only see the backups that have been made since Yosemite was installed. Other backups are grayed out on the Time Machine interface display and cannot be accessed......even though the backup data is present on the hard drive, and you can see the data or folders displayed using the Finder.
If you want Time Machine to display current backups.....AND....older backups when you click Enter Time Machine, your only option would be to try to reinstall Yosemite to see if the new installation will display current backups and older backups on the same Time Machine interface.
There is absolutely no assurance that this will be successful if you try it. Your call on that.
What might work......IF.....you can lower your requirements to have both new and old backups displayed on the same Time Machine interface.....and instead have current Yosemite backups displayed on one Time Machine interface and the older backups on another, or separate Time Machine interface.......is to try the Browse Other Time Machine Disks option.
You do not mention at all whether or not you have tried the Browse Other Time Machine Disks in this post or in your video. I assume that you tried this, since it is mentioned in Pondini's documentation and also other Apple Time Machine documentation, and it also did not work for some reason.
But, if you have not done this......and you can lower your display requirements......you might want to try.
1) From your normal Mac desktop, make sure that the "dock" , normally at the bottom of the screen, is displayed......and that the Time Machine icon is displayed there as well.
2) Control-Click.....or.....Right-Click the Time Machine icon to see if an option to Browse Other Time Machine Disks is displayed
3) Click on Browse Other Time Machine Disks
4) If an option to use another disk is displayed, click on the disk to highlight it, then click Use This Disk
What happens when you do this?

HT3275 can't backup with time machine

I can't backup with time machine and I do not receive any errors, time machine just stays in the 'looking for backup disk' mode and will not go any further. I went as far as buying a new usb backup disk to replace the old one and still the same issue occurs. I've tried using different usb ports on my mb pro and that doesn't work. No amount of restarting, ejecting discs or checking preferences helps. Disk utility states the drive is fine (even the new one), the permissions or sharing haven't changed.
My system is up to date with the latest updates, and this all just happened out of the blue one day. I suppose I could do a system restore but I'm afraid of losing my data; and I'm not 100% sure how to do that.
I'm running OSX 10.8.2, 2.3 GHz Intel Core i5, 4GB memory

There is good advice available about Time Machine. Go to Pondini's paper(s) before you do anything so drastic as a system restore.
Time Machine - Troubleshooting
Time Machine - Frequently Asked Questions

Backups without Time Machine?

I'm wondering what the options are for backups without Time Machine. I'm a tech support guy from a way back who's primarily worked with *nix and Windows machines, and I'm no stranger to setting up networks, NAS devices and filers, etc.
This is an all-Apple setup - MacBook Pros, iMacs, iPads, iPhones, etc. There were 2 Time Capsules in the mix, but they both began to fail so we replaced them with a single Seagate 4-bay NAS attached to 2 LAN ports. This is a 10/100/100 network with N-wireless and Gigabit switches.
Both before and after swapping out the Time Capsules for the NAS, we received the "
Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you.
message on the MacBooks, less often on the iMac. Post-NAS implementation, we are still seeing on the MacBooks. I've tried relaxing the backup settings to every 3-4 hours since all machines were set to backup every hour as default and I believe they were stepping on each other.
I'm not ruling out the network, or anything at this point, but it seems odd that Time Machine will complete a backup, then at some point in the future find that it's not valid and need to go again from scratch. It's not ideal to use Time Machine if it needs a new full backup every ~2 days or more.
So I'm simultaneously looking for any advice on how to resolve the Time Machine error, and/or how to perform routine backups to the NAS without Time Machine.
Thanks in advance.
MM

I'm wondering what the options are for backups without Time Machine
Time machine is NOT a data backup, its a system (/emergency) backup. (whats the difference? the system is data?!, Yes, however the difference is huge).
....and most pros (nearly all) are absolutely NOT using Time machine as a source, and never as a single source to archive important data.
Time machine by definition is absolutely not a data archive, nor a storage nexus for vital data, which is secure by definition.
here you go:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
OS X Lion, Mountain Lion, and Mavericks include OS X Recovery. This feature includes all of the tools you need to reinstall OS X, repair your disk, and even restore from a Time Machine
"you can't boot directly from your Time Machine backups"
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing.
#7. Network attached storage (NAS) and JBOD storage
Drawbacks:
1. Subject to RAID failure and mass data corruption.
2. Expensive to set up initially.
3. Can be slower than USB, especially over WiFi.
4. Mechanically identical to USB HD backup in failure potential, higher failure however due to RAID and proprietary NAS enclosure failure.
Advantages:
1. Multiple computer access.
2. Always on and available.
3. Often has extensive media and application server functionality.
4. Massive capacity (also its drawback) with multi-bay NAS, perfect for full system backups on a larger scale.
5. *Level-2 security of your vital data.
JBOD (just a bunch of disks / drives) storage
Identical to NAS in form factor except drives are not networked or in any RAID array, rather best thought of as a single USB feed to multiple independent drives in a single powered large enclosure. Generally meaning a non-RAID architecture.
Drawbacks:
1. Subject to HD failure but not RAID failure and mass data corruption.
Advantages:
1. Simplex multi-drive independent setup for mass data storage.
2. Very inexpensive dual purpose HD storage / access point.
3. *Level-2 security of your vital data.
Time Machine is a system hub backup, not a data hub backup
Important data you “don’t dare lose” should not be considered ultimately safe, or ideally stored (at the very least not as sole copy of same) on your Time Machine backup. Hourly and daily fluctuations of your system OS, applications, and software updates is the perfect focus for the simple user to conduct ‘click it and forget it’ backups of the entire system and files on the Macbook HD.
Bootable clones are the choice of professionals and others in that Time Machine cannot be booted from and requires a working HD to retrieve data from (meaning another computer). Your vital data needs to be and should be ‘frozen’ on some form of media storage, either in a clone, as an archived HD containing important files, or on DVD blank archival media.
A file that is backed up to Time Machine is unsafe in that if that file is deleted off the computer by accident or lost otherwise, that file will likewise vanish from Time Machine as it reflects changes on the internal computer HD/SSD.

Online Backup for Time Machine Drive?

I've been looking around at the major names in online backup and most of them won't let you back up external drives, but I found BackBlaze and it looked good till I found out that it specifically won't allow you to backup a Time Machine drive to its service.
Does anyone know of a good online backup service that will let you back up your time machine drive?

i second Thomas' remarks.
you may want to consider Dropbox for that redundant backup.
JGG

I cannot restore my backups using Time Machine - please help!

My iMac has been returned from repair and as part of this was reset to its factory settings, depeting everything. I took backups using Time Machine to an external hard drive before it went off for repair, and after it came back I restored the data - so I thought. It seemed to work for a long time, but on completion no files had been restored, and all the backups from before the iMac went for repair are now inaccessible in Time Machine. However as far as I can see they are still on the hard drive however.
The iMac has since been backing up the now empty machine to this hard drive, over-writing the data, but I have now switched Time Machine off.
How can I restore my back-ups and recover my data please?
John Wood

'depeting' is a typo for 'deleting'. I don't seem to be able to edit this out above

Time Machine couldn't complete the backup to "Time Machine Backups". The backup disk is not available.

I have received an error message today - Time Machine couldn't complete the backup to "Time Machine Backups". The backup disk is not available.
I am using a WD 1.5tb Help!!! Everything is on there and the files are not showing. The WD SmartWare icon is on the Desktop but the Time Machine icon is not. When I save a file I open the Time Machine file and save it in there. What do I do? How do I get my files back?? I do not keep anything on the macbook pro. Help PLEASE!!!

Hi Yaann,
Thank you for your reply. Yes I did try that, but no luck.
After several hours of calls to a very unhelpful WD and further calls to Applecare, there was nothing anyone could do. Out of frustration when holding the WD 1.5TB hard drive, I smacked it (NOT recommended). Well, to my surprise the WD reappeared on my devices list. Let me tell you, I pulled my files off as fast as I could on to my MacBook Pro. I breathed a huge sigh of relief when I confirmed that everything transferred back to the MacBook Pro fine. I spoke with the Applecare tech and he talked me through the set up on a new Lacie hard drive.
What I can say is that after further research into external hard drives and now personal experience - Lacie is the top of the line and you get what you pay for. I would NEVER ever recommend a WD to anyone. Given one, I would still through it away.
I was LUCKY.
I must say the support and understanding I received from Applecare was outstanding!! I would never own a apple product without applecare and from long term experience it is worth every penny.
All the best,

Why won't my Western Digital (2TB) My Book for Mac backup to time Machine?

This past fall (2012) I was notified by apple that the hard drive on my 2010 iMac might need to be replaced due to issues. Before doing so I was prompted to back up all of my data with an external hard drive using Time Machine. I purchased a Western Digital 2TB external hard drive and set it up easily. The setup parameters were such that the thing should backup my iMac to Time Machine on the hour every hour. This worked well and also allowed me to restore my user preferences for nearly everything when I got my computer back with its new hard drive. This was around October.
Recently (mid-March), my WD My Book no longer backs up to Time Machine. The computer recognizes the drive, allows me to access it, but will not backup to Time Machine. I have no hypotheses as to why this has started happening, but it just did. I have tried shutting Time Machine off and turning it back on to the particular external hard drive. This has not worked. I have tried to prompt a manual backup, but the computer gets stuck when preparing to back the drive up. It never actually commences the backup.
I understand that just like anything else that things fail. I also understand that sometimes things fail within the first few months of purchase (half a year-ish in my case). I just cannot understand what might be causing it. Any speculation?
Here are some screenshots associated with my current problems:

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.

Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.

Where are addresses kept on MAIL? I don;t like the new format at all. Frances
Begin forwarded message:
From: Frances Topping <[email protected]>
Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
Date: August 25, 2014 at 9:46:01 AM EDT
To: discussions-replies <[email protected]>
Old Entourage is POP and new Mavericks MAIL is IMAP I believe. I don;t know how to export in the forms you mention. Frances

Multiple iPhone backups in Time Machine

I have my wife's iPhone and she was charging it on our Mac via cable. Our iTunes is instructed not to sync automatically. We have two phones in iTunes. Child comes along and somehow resets or wipes phone: not sure which one.
My question is, if I were to enter into Time Machine is it possible to discern which backup is for which phone? The phone is not synced often and I'm guessing the last one was in September, if she even synced at all during that month .
I'm on os x10.8 which was a recent upgrade. Our previous version residing on Time Machine is SL. I have been told to be careful on the restore just in case we need to resort to other (cough) measures in order to (cough) the data.
Thanx

pcp0827 wrote:
Is there a way to delete multiple backups in TIme Machine and not have to delete old files one by one by slow one by one?
Yes, sort of. You can delete indiividual backups, or all backups of selected items,via Time Machine. See #12 in Time Machine - Frequently Asked Questions. You can only select one backup at a time, but they're deleted in a separate process, so you can select another before the first one completes. When you exit from Time Machine, you may see one or more progress bars for the individual deletions. (As noted there, never delete anything from your backups via the Finder.)
But you really shouldn't have to do that. Time Machine will delete your oldest backups automatically, when it needs room for new ones.

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

Greyed out backups in Time Machine

Similar Messages

Maybe you are looking for