Greyed out podcasts but playing fine?

Greyed out playlists.
content plays ok.
Any ideas why they are greyed out?
More annoying than anything else....
host pc, have itunes match, all appears in order
confused.
Thanks, Simon
c

sorry, meant podcasts not playlists!

Similar Messages

Music wont play on my phone it says its there but its greyed out and wont play what do i do?

Music wont play on my phone it says its there but its greyed out and wont play what do i do? Ive already re downloaded the music but its not playing on my iphone.

Ok i think i have found out how to do it. Unplug your i phone, go to settings and then reset then reset all data and settings. This will warn you that it is going to erase eveything on your phone.
DO NOT BACK UP BEFORE HAND
then restart your phone and restore back up from when you donwloaded the new IOS5. This should sort out your problem :-)

Cannot delete greyed out podcasts on Ipod Touch

I cannot delete greyed out podcasts on my ipod Touch since uprading to iOS 5.1. They don't appear when connected to itunes. Scarcely the end of the world but a little annoying! I'd be grateful for any suggestions.

This appears to be a bug. The only way I have been able to resolve this myself is to unsync and resync all of my podcasts via iTunes.
B-rock

Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows

I've got a Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows. I've tried all of the following initial tests as suggested on forums:
-Ram swaps
-Alternating video card in PCIe slots
-Trying alternate video card
-resetting pram and smc
-Multiple tests with memtest86+ over 26hrs and no failed ram
-Multiple tests (8-12 cycles) with apple HW diagnostics and no problems
-Firmware is approved firmware for early 2008 model...no new updates.
Gentoo livecd works fine and I even installed to hard drive and it boots fine with it. In addition to above tests I also ran a linux stress test putting all 8 cores at a load of 22 for 2.5hrs with no problems.
Memtest86+ for 24hrs+ yields no problems.
Where problems occur:
Booting off hard drive, DVD or firewire yields an immediate curtain of death and booting off a new snow leopard DVD dies about 25% into the install.
Looking at error log and a quick dmesg shows "Package 0 didn't get an HPET" and complains about AppleIntelCPUPowerManagement.kext. Google turns up illegal uses of this, so doesn't apply to my use case.
I'm a bit stumped since all was working well until one day it was non-stop curtains of death and can't get them to go away.
A logic board replacement at $1100 is not a feasible option for something that works on linux and windows, but not OS/X, is a bit disappointing and somewhat surprising.
Thanks for your help and advice.
Regards,
Marcos

Someone here once thought they knew EFI and Open Firmware a little, and used some commands from OF library that an Intel EFI Apple system didn't like. New logicboard.
Of course to run or boot OS X and see video you need EFI based card. The presence of some PC cards can block OS X from booting.
The fact you get part way through SL DVD, pull all the drives, put in a new drive and format it from SL DVD.
Most of the things you tried are what are more common with PC hardware. Including where people have tried and failed to install OS X on unsupported hardware.
I suppose it is possible something tried and failed to modify the Mac's firmware.
If you have Windows running, and you have WD drives, WD just posted new Lifeguard utility which is what I use to do a good job of stripping a drive down and recertify it for reuse, works wonders. Maybe same for other makes with vendor utility.

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc, does anyone know how to fix this? The photo's I burnt on the exact same type of disc work fine in both pc and macbook but the videos will only play on the pc.

If you are trying to play these on quicktime then what video format are those videos?
Wmp's? You need to install Flip4Mac.
Most other formats? Install Perian.
Or just use vlc instead. It's a much better, more powerful, and more general video player.

I tried to sync music to my phone and some of the songs and greyed out and wont play.. i cant delete them off the phone, nor can i sync any more music. can anyone help me?

the songs i tried to sync to my phone and greyed out and wont play, i cant delete them off the phone or sync any new music.. can anyone help me?

Same problem here - iPhone 6, iOS 8.1.2 and itunes 12.0.1.26

I purchased an album and it will play on my phone but it is greyed out and wont play in i tunes on my mac book

i purchased an album and it is on my phone and i can listen to it but on my computer it is there but it is greyed out and no album artwork. it wont play on my computer

Hi there,
It sounds like the album didn't completely download. I would recommend deleting the effected tracks from your iTunes library and redownloading them from the iTunes store. Take a look at the article below for more information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
-Griff W.

I've had a problem with syncing itunes, when i sync it dosent sync songs previously deleted it just greys them out, which is great but if i want to add a new video or song from my computer it wont sync it will just grey out and wont play. now all my songs

ive had a problem syncing with itunes recently. when i delete a song on my iphone when i sync with my computer it still syncs but just greys out and is rendered useless. thats great unless i when i want to add new music or videos from my pc to my iphone it wont sync and will just grey out. i looked for solutions and one said that deleteing all your music from the usage in settings would fix it, well now when i sync all of my music is greyed out. ive tried adding all of my songs manually into my ipod instead of syncing entire library and nothing. (also when i select to sync music nothing shows up in the usage bar (normally 3 gigs) might help) could someone please help?

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

3D Option is now greyed out in CS6, worked fine before, no changes to system hardware

Hello, I'm running Windows 7 64bit, and I have 2 AMD Radeon 6950's in crossfire. It has only been a couple of months since I used CS6's create 3D extrusion layer, and it used to work fine, but now it's greyed out no matter what type of layer I'm selected on. Photoshop is seeing my graphics card just fine http://i.imgur.com/LREws.png and even says that 3D is an enabled feature if I mouse-over the Graphics Processor Settings box. I have the latest 12.8 AMD drivers. So, something between Photoshop and my graphics card are no longer playing nice - maybe an AMD Catalyst software setting? Although I've made sure that all my settings were restored back to default. I should also note that all other GPU enhancement features that I'm aware of seem to be working fine (like the quick zoom rendering, etc.)

Glad you found the issue!
And thanks for that follow-up. Even though it seems embarrassing, don't be worried over it. We all zone out and do this sort of thing from time to time and your description of why it happened will no doubt help others who come across this thread.
I feel a bit silly as well, as I certainly know RGB is a requirement of 3D, and now you mention it I even remember going through this before with someone, so I should have thought of it.
Perhaps the best thing to do is to ask for / post a screen grab first, before delving into a problem. It would probably have jumped out at someone pretty quickly.
-Noel

Itunes greyed out; can't play on computer

Got a new computer. Went to iTunes and discovered my purchased tunes were in bold. I could see all imported tunes on my ipod but they were greyed out. Did a little research and discovered this is to prevent music pirating but there is a work around for legitimate purposes. So I transferred all the music from my ipod to my PC. (I dragged the ipod music folders into the Windows Media Player). I played a couple of them and it seemed all was going well. then I went to iTunes to see what was going on there. I couldn't find any music, purchased or imported without going to the ipod. All the songs were there but greyed out. Now I can't even play them on the computer. I get a message," Window Media Player cannot find the file." As it stands now I can't do anything with my music on iTunes ( play, move songs, create playlist, etc) or on my computer. Fortunately I didn't screw up my ipod, but of course I can't rearrange anything on it without first doing it on iTunes and the syncing.

Any help here?
Troubleshooting songs and audiobooks that won't play on the iPod.

After replacing wifi antenna wifi is still dimmed/greyed out. Bluetooth works fine. How do i fix this issue? Could there be another part that needs replacing?

my wifi was greyed out so I replaced the wifi antenna. I just put the new one in and restored the ipad but the wifi still is greyed out but the Bluetooth works fine. What could the problem be and how can I fix it?

This article offers some suggestions which may help: iOS: Wi-Fi or Bluetooth settings grayed out or dim
This likely has nothing to do with your router.

Can't Mount External HD, Greyed out in DU, Verifies fine

I have a third-party hard drive enclosure I've been using for years with an IDE drive. I have two identical external HD cases and it does the same thing in both. So I know it's not the case. All of a sudden, I can't get the drive to mount.
1. It shows up in disk utility, but is greyed out
2. If I try to mount it, I get the following error: "Mount Failed. The disk could not be mounted. Try running First Aid on the disk and then retry mounting"
3. Run First Aid (verify & repair), but say the disk is fine
4. Still will not mount
5. Info looks fine, although owners are not enabled. Tried running batchmod on /Volumes and that did nothing.
I'm sure I could erase it, but I have no backup for any of the stuff on the drive.
Any ideas? Everything about this says it should be working.

I'll check those out, but I think I may have found a way to get the files off the disk. I have a PC here that I use for gaming, so I had the idea to try to see if I could use the PC to view the files, since they're all still there (I was able to Defrag the disk using Drive Genius actually). I found a free app called HFSExplorer...and much to my surprise, it worked! I can view the entire file structure and extract the files to another disk.
Sorry to say, but I had to use a PC to accomplish this, but at least I can save my files. Needless to say, I don't trust this drive any more, and it's not SMART compatible, so I'll probably end up getting a new drive.
Just thought I'd let everyone know, in case they ran across this problem.

Export out of sync, plays fine in FCP

I'm working on a short movie for a class I'm in, and everything shows up and plays fine when open the file in Final Cut, but for some reason, it doesn't want to export properly. Whenever I export, no matter what settings I've chosen, the audio and video become out of sync in the exported file, but strangely only for clips where we've chosen a different audio track from the original recording. The first clip, which uses the audio and video from the camera, works fine when exported, but for each subsequent clip, the audio starts close to synced, then gets further and further out of sync. Even more baffling, the final clip, which is done the same as all the others, with video playing and an external audio track synced to it, works fine again!
I'm pretty sure that the problem is with the video, as it seems to slow or have parts cut out of it in the rendered file.
Anybody have any ideas what could knock the video out of sync like that when rendering?

I'm working on a short movie for a class I'm in, and everything shows up and plays fine when open the file in Final Cut, but for some reason, it doesn't want to export properly. Whenever I export, no matter what settings I've chosen, the audio and video become out of sync in the exported file, but strangely only for clips where we've chosen a different audio track from the original recording. The first clip, which uses the audio and video from the camera, works fine when exported, but for each subsequent clip, the audio starts close to synced, then gets further and further out of sync. Even more baffling, the final clip, which is done the same as all the others, with video playing and an external audio track synced to it, works fine again!
I'm pretty sure that the problem is with the video, as it seems to slow or have parts cut out of it in the rendered file.
Anybody have any ideas what could knock the video out of sync like that when rendering?

Corrupt wav files in Adobe but play fine in other apps

I have some old projects that have been backed up several times. The problem is some of the sound files appear corrupt when I load them into Adobe Audition. The sound plays all distorted with VERY LOUD clicks/pops in it. However, I can play the same files just fine in any standard media player (Winamp, WMP, VLC player)
I tried opening the project in the new Audition but same thing happens. I've also tried the "Open As" option and specifying what windows reports as it's sample rate etc but it comes out the same. Most of the other wav files in the projects work just fine, but one here and there is like this and is preventing me from remixing anything. Worst case scenario I suppose I could play the file in winamp and record it but then I'd have to match the timing up and everything and I just don't have the motivation to do that on all these projects.
http://home.comcast.net/~chicken3/Track17.zip
This is one of the files if somebody wants to take a moment and look at it. I just don't understand why winamp and all of them can play it fine if it was corrupt in any way, other than VLC which I know doesn't need file headers to play properly most of the time.
Below is a pic of what the wave looks like in Audition. Oh, and Reaper reads the files just fine as well, if I hadn't trimmed all my wav files down i'd just paste the whole project into Reaper and remix but unfortunately I trimmed all the files already.

Well as I said it plays in standard media players such as Winamp (which generally will not play a file with a corrupt header or any sort of problem like that) However I checked it out in that app you mentioned and the results seem normal to me. I've tried Open As in Audition and I can choose the 44.1KHz and 32 bits but it opens the same as it did before. So far I've only noticed 32 bit files with this problem but it's possible it has nothing to do with that. Again, the file plays fine in all standard players, and Reaper and other audio apps open it just fine. Audition will not.
Format                           : Wave
File size                        : 36.8 MiB
Duration                         : 1mn 49s
Overall bit rate                 : 2 822 Kbps
Audio
ID                               : 0
Format                           : PCM
Codec ID                         : 1
Codec ID/Hint                    : Microsoft
Duration                         : 1mn 49s
Bit rate                         : 2 822 Kbps
Channel(s)                       : 2 channels
Sampling rate                    : 44.1 KHz
Resolution                       : 32 bits
Stream size                      : 36.8 MiB (100%)
Edit: Downloaded goldwave trial just to see, it opens flawlessly in Goldwave. I suppose I can try resaving the files from within goldwave and see what happens...Audition is really pissing me off.

Bit Rate Viewer bad, but plays fine?

Hi there,
For people who have helped me in the past with this problem, i thank you.
I finaly got it to play fine on a DVD player in which i could not get it to work on before.
However when i look at it in Bit Rate viewer program, the needles drop like crazy but it plays fine should i be worried?

Someone here once thought they knew EFI and Open Firmware a little, and used some commands from OF library that an Intel EFI Apple system didn't like. New logicboard.
Of course to run or boot OS X and see video you need EFI based card. The presence of some PC cards can block OS X from booting.
The fact you get part way through SL DVD, pull all the drives, put in a new drive and format it from SL DVD.
Most of the things you tried are what are more common with PC hardware. Including where people have tried and failed to install OS X on unsupported hardware.
I suppose it is possible something tried and failed to modify the Mac's firmware.
If you have Windows running, and you have WD drives, WD just posted new Lifeguard utility which is what I use to do a good job of stripping a drive down and recertify it for reuse, works wonders. Maybe same for other makes with vendor utility.

Greyed out podcasts but playing fine?

Similar Messages

Maybe you are looking for