Grid 11.2.0.2 install on OEL 6.3 fails
Grid Single node (not doing RAC) 11.2.0.2 (latest download available from otn) install fails during ./root.sh execution
Fails with
Creating OCR keys for user 'grid', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node node1 successfully pinned.
Adding daemon to inittab
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /ocw/grid/crs/install/roothas.pl line 296.
Oracle root script execution aborted!
Perl link is there, there is no privilege issue in the /tmp directories as suggested by MOS ID 1069182.1
Fresh new install of OEL6.3 UEK, preinstall completed no issues, oracleasm config, createdisk...no issues; however
running oracleasm update-driver - says there is no driver for kernel 2.6.39-200.24.1.el6uek.x68_64
I tried the suggestions in one of the threads where a initctl is added to the perl script...that also produced a fail
Any help...?
ron.
Edited by: rmueller on Feb 3, 2013 9:12 PM
Hi,
have you tried disabling SE-Linux and the firewall. Just to make sure?
Also: With the UEK kernel, the asmlib drivers (kernel dependent part) are already included in the kernel (the reason why updatedriver won't work).
You only need the support and the asmlib rpm.
Regards
Sebastian
Similar Messages
-
Is Grid Control to ever be certified on OEL 6?
The title said it all really.
I would like a response from Oracle - I even opened an SR on this and they instructed me to put the question here.
ThanksBazza wrote:
That is not what I asked.
I know it is not currently certified.
The question is Grid control to ever be certified on OEL 6."ever" is a long time.
One would expect that oracle will, at some time, certify oracle's database and supporting products to run on oracle's operating system. One would NOT expect them to pre-announce a date. -
Grid Control 11g Agent: The free port availability check has failed.
I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
Amos814475 wrote:
I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
AmosYEP, overhere the same problem.
Can't figure out yet what the problem exactly is.
In our case I deinstalled a working 10.2.0.4 agent ( same port same config ) and tried to install 11g Agent.
It fails with the above message. We however are on AIX, and that hasn't a 'netstat -p' option to find occupied ports easily.
Because the database is question needs to be monitored constantly I now reinstalled the 10.2.0.4 agent again and works seemlessly
Still unsolved.....
FJFranken -
Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!
Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks! -
my new i-tunes download not installing 'service apple mobile device failed' windows error 126
I have the same problem. I uninstalled the old one because it will not work and now the new one does not either.
Keep getting this picture
Nothing on it works to install itunes and there is no support on the apple site.
Ideas? -
Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron -
When Creative Cloud updated a few days ago (Win7) it reported I had no installed apps.
In Lightroom I keep getting messages that a new version is available. Installed it from CC and it installed without error, CC shows I installed it, but it simply fails to run.
How do I get CC to find apps installed under the previous version?
And how do I get Lightroom CC to run?
PeterI still don't know how to get CC to find that I have Photoshop CC installed, but running Creative Cloud, going to Preferences and signing out, then signing in again got Lightroom CC to work.
Since Photoshop CC is still working despite apparently not being installed things are now OK, at least for the moment. But I'm not feeling at all happy with Adobe. -
Anyone out there that knows how to get past this? I´m using Adobe Application Manager and nothing else.
Installed Photoshop and Illustrator without problem, but as I try to install Lightroom 5 it is aborted.I am having the same problem, I am using win vista 64, and everything but LR 5 works,
{{ Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603 }}
any solutions out there?? -
Flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse
flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse was detected by my antiviral software.
Please can you help?
Prof_STHello Wojislav,
Thank you for your prompt response. Yes, I can do that but don't you think that it would be preferable if the installer/update script didn't evoke this response? None of my other software updates does and while I would like to trust people, these days it gets harder and harder when folks are willing to lie and cheat at the drop of a hat and without compunction. It does not help either that false sites (Adobe mimics) have been installing Trojan Horses so it would be safer all around to remove that foible. It is just not very good. Or at least, it does not look very good, which amounts to the same thing at first glance.
Thanks again for you concern.
Prof_ST
On Mon, 18 Mar 2013 00:06:45 +1000 Wojislav <[email protected]> wrote -
Re: flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse
created by Wojislav in Installing Flash Player - View the full discussion Modify antivirus
Script for automatic updates some programs identify as a Trojan horse
you have to put in trusted sources adobe installer
or simply do the following: disable antivirus, install adobe, Switch on antivirus
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5154714#5154714
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5154714#5154714
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5154714#5154714. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Purchased a new iMac - installed CS5 CD - message - Installer failed to initialise....
You need to copy all the installer disc to the desktop, Folder by folder. for example, Copy the contents of Payloads folder on Disc 2 to payloads folder of Disc 1, Extension to extensions, etc
Then you will see the setup.app file on the Folder that you created on the desktop.
Run that and check. -
I've downloaded acrobat XI Pro, installed it, but get "Acrobat failed to connect to a DDE server error message.
Hi Bruce,
Please open registry by typing "regedit" in the Run window (Windows + R)
Now, navigate to "HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and changing the Key from "AcroviewA10" to "AcroviewR10.
Now, try launching Acrobat and let me know if the issue resolves.
Regards,
Anubha -
Since installing CS6, Acrobat Pro X failed a few times. I had to reinstall it a few times, now doesn't work at all even after installing again.
Hi there
Thank you for your reply.
When I click on the link for the cleaner however, before I can download the
file, it gives me this message:
"Important - This tool is not for use with any creative suite products
including suites that contain Acrobat. It can only be used with standalone
versions of Acrobat and Adobe Reader"
Adobe X Pro forms part of my Adobe Creative Suite 6 Design Standard?
Please advise.
Thanks
Nandi -
Just got a new iPod Nano 7gen. Have downloaded and installed iTunes 10.7 and installed succesfully. But iTunes fails when I try to start the program. Have OS X 10.8.2. Moutain Lion. Please help - thanks.
SvenProblem solved. Copied latest file of iTunes Library.itl from Previous iTunes Libraries and replaced it with the original in Music - iTunes-folder.
-
I am trying to download & install Photoshop 6 but setup fails with "Installer failed to initialize
I am trying to download & install Photoshop 6 but setup fails with "Installer failed to initialize Download Adobe Support Advisor" I then downloaded and ran the Support Advisor; it reported NO problems.
I can still can not load Photoshop 6!Lw_jr01 to clarify when you are trying to install Photoshop CS6 you are receving the error message that the, "Installer Failed to Initialize." Is that correct? If so which operating system are you using?
-
Hi Oracle Experts,
I am trying to setup a new GRID Standalone Infrastructure on a previously installed Oracle 11g database.
It runs all fine but when prompts to run the root.sh script it does not allow to proceed as it prompts to overwrite the existing path for /usr/bin/local
well, I google'd and tried with overwrite : Y . It prompted to run the script but it failed ...
Could you please help me on this ..
[root@asm ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
To configure Grid Infrastructure for a Stand-Alone Server run the following command as the root user:
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
[root@asm ~]# /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/ crs/install/roothas.pl
2015-03-18 01:42:25: Checking for super user privileges
2015-03-18 01:42:25: User has super user privileges
2015-03-18 01:42:25: Parsing the host name
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node asm successfully pinned.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
acfsroot: ACFS-9320: Missing advmutil.
acfsroot: ACFS-9320: Missing advmutil.bin.
acfsroot: ACFS-9320: Missing fsck.acfs.
acfsroot: ACFS-9320: Missing fsck.acfs.bin.
acfsroot: ACFS-9320: Missing mkfs.acfs.
acfsroot: ACFS-9320: Missing mkfs.acfs.bin.
acfsroot: ACFS-9320: Missing mount.acfs.
acfsroot: ACFS-9320: Missing mount.acfs.bin.
acfsroot: ACFS-9320: Missing acfsdbg.
acfsroot: ACFS-9320: Missing acfsdbg.bin.
acfsroot: ACFS-9320: Missing acfsutil.
acfsroot: ACFS-9320: Missing acfsutil.bin.
acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:
acfsroot: ACFS-9302: No installation files found at /u01/app/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5xen-x86_64/bin.
asm 2015/03/18 01:43:06 /u01/app/11.2.0/grid/cdata/asm/backup_20150318_014306.olr
Successfully configured Oracle Grid Infrastructure for a Standalone Server
when I checked for ASM instance its not running ... but just ohasd service and nothing else ..
[root@asm grid]# ps -ef | grep pmon
oracle 5831 1 0 01:15 ? 00:00:01 ora_pmon_db11g1
root 12625 8794 0 02:30 pts/2 00:00:00 grep pmon
[root@asm grid]#
[root@asm grid]#
[root@asm grid]# ps -ef | grep d.bin
oracle 12643 1 5 02:30 ? 00:00:00 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
root 12715 8794 0 02:30 pts/2 00:00:00 grep d.bin
[root@asm grid]#
Could you please help .hi,
The issue not with /usr/bin/local. When you excute root.sh, it will try configure the ASM with New GRID HOME. Issue started, whent tried to start
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting <<=================================================================
acfsroot: ACFS-9320: Missing advmutil.
Please let us know the below details
==> Acfs is configured the servers??
==>acfsutil registry
acfsutil info fs output.
==> With out ASM instance , How the database, CRS STarted ???
==> Please try stop and start the crs.
==> crsctl query crs activeversion output
Regards
Krishnan
Maybe you are looking for
-
How do I transfer things from one login to another?
So when I purchased my MBP, I was unaware of how to set it up so I could still print from my school printer. However, I found out I have to have my shortname the same as my school username in order to do this. I have created a second account user on
-
How do I disconnect from Wireless to use wired connection?
Hi - I'm new to this and I apologize if this question is ridiculously easy. I am using a cable modem in which I have plugged my WRT160Nv2 wireless router. I am supporting three computers here in my home; my laptop (both wired and wireless), my daught
-
Find the relationship between tables where the constraint type is 'R'
Hello, I am trying to find an answer of the following question: How to query the user_constraints view (probably some more views should be involved here) in order to get information about the table name, the column (or columns) that is (are) a foreig
-
What is the best waterproof case for the iphone5
I have been looking for a good waterproof case. After reading many reviews. It seems to me there are issues with every case. From blurry screen, muffled sound, and leaking. Please give some feedback.
-
How to load image in to a bitmap data?
Is there any way to get snapshot of an image without adding it to my application. I have some *.jpg images that I wont to load in to bitmap data.