Grid 11.2 on windows. A question about services

Hi,
i've installed 11.2 Grind Infrastructure on Windows 2008.
OUI creates some services:
OracleOraCrs11g_home1TNSListener       Manual
OracleOraCrs11g_home1TNSListenerLISTENER_SCAN1       Manual
OracleASMService+ASM1                   ManualSupport says that Listener service must be in Auto,
but fresh install creates it in Manual.
I think that manual is the correct ways, so the crs coordinates the order of services start.
It'is correct?
Thank you

Hi,
i'm looking LISTENER SCAN config.
In service i've:
Node1:
OracleOraCrs11g_home1TNSListener      Started Manual
OracleOraCrs11g_home1TNSListenerLISTENER_SCAN1     Started   Manual
OracleOraCrs11g_home1TNSListenerLISTENER_SCAN2     Started   Manual
OracleOraCrs11g_home1TNSListenerLISTENER_SCAN3      Started Manual
OracleASMService+ASM1                  Started ManualNode2:
OracleOraCrs11g_home1TNSListener      Started Manual
OracleOraCrs11g_home1TNSListenerLISTENER_SCAN1     Started   Automatic
OracleOraCrs11g_home1TNSListenerLISTENER_SCAN2     Started   Automatic
OracleOraCrs11g_home1TNSListenerLISTENER_SCAN3      Started Automatic
OracleASMService+ASM2                  Started ManualCan this possible??? in both machines service manager show me all listener started?
Crsctl instead no.
1 listener on node1
2 listeners on node 2.
Thank you.

Similar Messages

HT201263 What will i do?screenshot There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, cli

What will i do? ITune screenshot is as follows >
There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

Do what it said to do.
"Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. "

TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store, click here.
Please help me i can aktivate my phone imei 012423006333181.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store
no imei also

Question about service layer design

I have a question about the design/architecture of service model layers, specifically the task service layer.
Could a task service be a small "action", ie an operation that doesn't require composition? So if I have a requirement to allow customers to update their personal info, like address, would I have a task service named ChangeCustomerMailingAddress, that in turn calls the update operation on the Customer entity? Or would it be better to call the entity service directly? Another example would be retrieving data, like RetrieveCustomerBillingHistory, would that be a separate task service, or just a get/read operation on the Customer entity service?
Any insight is appreciated.
Thanks

You seem to be confused what all the different parts of Java do.
JRE - runtime environment, the minimum needed to run standard java applications
Java Standard Edition - the standard set of API's that form the base of most java applications. You need the J2SE SDK to compile these applications and the JRE to run them.
Now talking about "application design", I'm not sure what you mean. Are you talking about graphical user interfaces? In that case you would want to look into Swing, and that is indeed part of the standard edition API set.

ASM & grid infraestructure in 11gR2 - question about services

Hi all,
I have completed my first installation of 11g (it is R2). then, by trying to create the ASM instance (for stand alone dbs), I found that Grid Infrastructure
was a mandatory component in order to create the ASM instance.
Now, ASM is in place and running fine, but I found a lot of new services (ohasd, diskmon and so on)
Below is the output:
oracle 30695 1 0 Oct04 ? 00:00:08 /u01/app/oracle/product/11gR2/grid/bin/ohasd.bin reboot
oracle 32171 1 0 Oct04 ? 00:03:52 /u01/app/oracle/product/11gR2/grid/bin/oraagent.bin
oracle 32186 1 0 Oct04 ? 00:00:01 /u01/app/oracle/product/11gR2/grid/bin/tnslsnr LISTENER -inherit
oracle 32364 1 0 Oct04 ? 00:00:07 /u01/app/oracle/product/11gR2/grid/bin/cssdagent
oracle 32366 1 0 Oct04 ? 00:00:14 /u01/app/oracle/product/11gR2/grid/bin/orarootagent.bin
oracle 32382 1 0 Oct04 ? 00:00:00 /u01/app/oracle/product/11gR2/grid/bin/diskmon.bin -d -f
oracle 32394 1 0 Oct04 ? 00:00:00 /u01/app/oracle/product/11gR2/grid/bin/ocssd.bin
oracle 32604 1 0 Oct04 ? 00:00:00 asm_pmon_+ASM
oracle 32606 1 0 Oct04 ? 00:00:00 asm_vktm_+ASM
oracle 32610 1 0 Oct04 ? 00:00:00 asm_gen0_+ASM
oracle 32612 1 0 Oct04 ? 00:00:00 asm_diag_+ASM
My question is as follow:
Which is the right procedure, and which order should I folow, in order to stop and start all this stuff?
Replies will be appreciated.
Thanks
Gustavo

I want to make sure I understand the startup and shutdown process for RAC:
Will crsctl stop cluster or crsctl stop crs stop database if it hadn't already been stopped? If yes, then why run srvctl stop database?
crsctl stop cluster -all
- stops the cluster stack however Oracle High Availability Service is still running
- resources do not failover
crsctl stop cluster-n <server_name>
- stops the cluster stack on one node however Oracle High Availability Service (OHAS) is still running
- resources do not failover
crsctl stop crs
- stops all OHAS and Clusterware Stack on local node
- this includes database, services, asm, clusteware and ohas on local node
- resources failover
crsctl stop has
- Is this only specific to Oracle Restart and Grid Standalone Server installation or can it be used for RAC?
- stops the OHAS and Clusterware stack on local node
- this includes database, services, asm, clusteware and ohas on local node
Order of shutdown for single node to be rebooted and resources NOT to be available
- srvctl stop database -d <db_name> -i <instance_name>
- crsctl stop cluster -n <server_name>
- crsctl stop has
-----Is crsctl stop has needed?
Order of shutdown for single node to be rebooted and resources TO BE available
- srvctl stop database -d <db_name> -i <instance_name>
- crsctl stop crs
-----Is crsctl stop has needed?
Order of shutdown Clusterwide to be rebooted
- srvctl stop database -d <db_name> -i <instance_name>
- crsctl stop cluster -all
- crsctl stop has
-----Is crsctl stop has needed?
I appreciate any validation of my understanding.

There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

Help

Hieu Apple wrote:
Help
We'd love to. But you haven't told us anything about your issue. This website/forum does not support HPML (Hyper-Psychic Mindreading Logic).

Aliases - A question about services which are known by more than one name

If I create a tuxedo alias for an existing service, does the 'original' service simply answer to either name OR does the server end up with one more service than it used to have? i.e does aliasing create a clone.I dont want to discuss the implications of cloning etc, I just want to if a service then bears two name plates or whether I get a clone of a service. I just want to know what the truth is.TIA(I have had two conflicting explanations from experienced developers - nice guys but who is right?)

Allan Moore wrote:
If I create a tuxedo alias for an existing service, does the 'original' service simply answer to either name OR does the server end up with one more service than it used to have? i.e does aliasing create a clone.I dont want to discuss the implications of cloning etc, I just want to if a service then bears two name plates or whether I get a clone of a service. I just want to know what the truth is.TIA(I have had two conflicting explanations from experienced developers - nice guys but who is right?)When you write a service, you write a Function, for example TOUPPER. When you compile the function into a server, you specify a mapping that service TOUPPER will be processed by function TOUPPER. When you boot the server and use the -A option, your telling the server to advertise all services in its mapping table, hence service TOUPPER is advertised. If I use the -s option to alias, then I am overriding the compiled mapping table and dynamically creating a new one. So by saying
-sTOUPPER:TOUPPERV2 I am saying that service TOUPPER will be processed by function TOUPPERV2 (version 2). Whatever was compiled into the server is overridden.
If you put a -A and a -s on the CLOPT line, then things COULD get weird. If I said "-A -sTOUPPER:TOUPPERV2": then I'm saying TOUPPER is processed by both functions TOUPPER and TOUPPERV2. I don't know if this is even legal, and I can't think of a reason to do this. The Tuxedo service table just scans linearly looking for a string match on TOUPPER. Which ever function entry comes first is the function that will be called.
If I said "-A -s TOLOWER:TOUPPER" then I'm adding a new service that uses an existing function. This is very legal, though a little cryptic for administrators. A better choice is "-s TOUPPER,TOLOWER:TOUPPER" so that it is explicit what services the service offers and what function is processing them.
Hope this helps.
Brian Douglass
Transaction Processing Solutions, Inc.
8555 W. Sahara
Suite 112
Las Vegas, NV 89117
Voice: 702-254-5485
Fax: 702-254-9449
e-mail: [email protected]

Ipod problems .. question about servicing

okay so my ipod play button doesnt work .. and sometimes when i put new songs on it , it just skips over them and i can't listen to them .. would this be serviced or can i receive a new ipod ?

oh NOO its not under warranty anymore, its like a year old now .. what happens then if im not under warranty?

HT201210 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.

Please help me

You do not say what your problem is...
Go to Service Answer Center - iPhone and select your country from the drop-down box if that is all you want to do.

HT4061 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

these is the message i get on itunes screen, when i active my iphone 4 which was working fine i just updated IOS to 6.1. could you please help

You do not say what your problem is...
Go to Service Answer Center - iPhone and select your country from the drop-down box if that is all you want to do.

Question about Setting Window Title/the use of AVWindowSetTitle()

Hi everyone,
I have a question about setting the title of the window in which the Acrobat viewer normally opens a PDF file. The documentation states that AVWindowSetTitle() cannot be used in this case. However, using it has worked with versions of Acrobat/Reader up until and including version 8.
Everything breaks down starting with Acrobat 9.
According to the documentation I am supposed to do the following: "To set the title of a window in which the Acrobat viewer opens a PDF file, you must replace AVDocOpenFromASFileWithParams() and pass the window title in tempTitle."
Unfortunately, there are 2 problems I have with this approach:
     I do need to be able to change the document title on document Save, not only on document Open
     I do not know what AVDocOpenFromASFileWithParams() implementation has to look like if I have to replace it using HFTReplaceEntry().
Is there a sample customized implementation of AVDocOpenFromASFileWithParams() somewhere that I could take a look at?
Is there a way to change a document Title inside Acrobat/Reader window after a Save operation?
Thanks a million,
Lana2010K

     I am sorry. I don't know how you tested this and came to conclusion that this works correctly in Acrobat X.
     I just tested our Acrobat plug-in with a trial version of Acrobat X and this did not work.
     When we open a file in Acrobat (doing it ourselves in the plug-in by adding another specialized open) we set the window title to something different from the default file name. Then if a file gets edited and saved (File->Save), the window title gets reset to the file name. In the PDDocDidSave callback we call AVWindowSetTitle() to set it back to a more descriptive window title we need. This has worked up until and including Acrobat 8, but does not work in either version 9.0 or 10.0.
     Also, I just modified the plug-in code to always change the Window Title of every document (even if opened through native File->Open) on document Save. It does not work.
     Please help,
          Lana2010K

Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.

What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Question about child "windows"

Hello Everyone,
First, I want to thank everyone who's so graciously taken
their time to answer my previous questions. Because of you, I am
well on my way to developing my very first real world Flex
application. I am consistently astounded at how helpful this
community is and am very thankful to have you all here.
Now, I do have one question about some code that works on the
example but not in real life. I am trying to open a popup window
from a class named composeScreen. In my CDATA section, I have the
following code:
function showWindow(modal) {
var popup = mx.managers.PopUpManager.createPopUp(this,
composeNewMessage, modal, {deferred: true});
Yet, when I save the program, Flex Builder tells me:
"Access of undefined property mx"
Any idea why this is happening?
I've even tried importing the mx.managers.popUpManager class
and it makes no difference.
Please help! This is driving me nuts!
Thanks in Advance,
Anthony

Hi Anthony,
You will have to use popup manager class for this.Here is the
code to give you a lil bit of direction. Call init() function in
the initilize event of the <mx: application> tag
import mx.managers.PopUpManager;
private function init():void{
myWindow = PopUpManager.createPopUp(this, MyWindow, false);
myWindow.visible = false;
myWindow.x = 200;
myWindow.y = 200;
myWindow.height = 100;
private function showWindow():void{
myWindow.visible = true;
myWindow.expand.play();
<mx:Button id="btn" label="click me"
click="showWindow()"/>
When you click on the button your child window must pop
up.

Questions about Windows App Builder

Is there an additional charge, under a Professional account, for building a Windows app?
About how long does it take from submitting the folio to receiving the file to upload?
Does a new app need to be built each time I add a new folio to a multi-folio app?
Thanks,
Joe

Hi Joe,
There is no additional charge for a Windows app if you are making the Windows version of a title you previously created on iOS and/or Android. I usually turn around custom build requests within a couple of hours if I receive them during business hours. At most it takes 24 hours.
Just like on iOS and Android there is no need to update the app when you publish new folios. You just publish the folio and it is available instantly.
Neil

Grid 11.2 on windows. A question about services

Similar Messages

Maybe you are looking for