Grid Console and Configuration Change Console?

I have installed Grid Console 10.2.0.5, and now I'm looking at the Configuration Change Console URL (http://www.oracle.com/technology/software/products/oem/htdocs/config_control.html) wondering if I also need to install this as well.
It appears that the Grid console has all the management packs in, so maybe the Configuration Change Console is a standalone product (i.e. I only want the change management side and not all of grid control?)
Can someone clarify if I'm correct in this?
Regards
Stuart.

Thanks. We are just a small IT shop (only 12 databases), so Grid Console and repository are on the same server. I take it that I could also install Configuration Change Console on the same server under a different Oracle home, and use the same grid repository for the Change Configuration Console?

Similar Messages

OS X Server Deleted My Website and Configuration Changes

I have a small website I'm using from within my LAN on my MacMini under OS X 10.9.4, using html pages and one Python wsgi script. I ran into an issue with the databases in SQLite and rebooted. (I kept getting errors with the database being locked.)
After the reboot, I couldn't access my site and checked in OS X Server only to find the website was no longer there. (It had survived reboots before.) I checked /Library/Server/Web/Config/apache2/httpd_wsgi.conf and found that my WSGIScriptAlias entries (for that application and a few test/experimental scripts) were gone. All the changes I had made to OS X Server to set up my site were gone.
Is there any reason this would happen? And what can I do to make sure I don't suddenly lose entire website configurations when I reboot in the future?

Thanks that makes my decision easy. NAS is out of the question then since I do want multple devices to gain access to the media at times simultaneously. I did not know that NAS had this restriction. I also prefer the UI of iTunes for sorting thru my media.
So I will go with a dedicated Mac Mini running iTunes alone 24/7.
My next question would be about external storage. I do not need a raid 5 system since all of my media is backed up elswhere. I would like a good size external drive or multple drives that could run with minimal noise. (Prefer no fan) Currently I have been using a 2TB G-Drive with FireWire 800, it is very quiet, no fan and has worked like a charm. The problem is I need more space. I ended up getting a second 2TB GiDrive since the first one worked so well and daisy chained it to the first one with FireWire 800.
The problem is the Mac tend to unmount the drive after extensive sleep. I do have the mac in No Sleep Mode, Wake For Network access and Sleep drive when not needed. The latter does not work and I ended up not letting the drive sleep to prevent the drive from unmounting.
Am I doing something wrong that is causing the drive to unmount on its own?
Is there a better external drive for my needs that allows for growth yet runs quietly?

Making a configuration change without using admin console

I am using the Platform Edition of App Server 7 so I don't have access to the web-based admin console.
I need to make a configuration change and the only directions I have are for the admin console.
Can anybody give me some pointers on what file to edit to acomplish the procedure below?
8. Log in to the Sun ONE Application Server administration console.
9. Select the application server Instance on which you installed the Identity Server.
10. Click JVM Settings and then JVM Options.
11. In the JVM Option field, enter the following string: -Dhttp.keepAlive=false
12. Click Add and then Save.

I think I've found it...
The file is server.xml and it is located at:
/var/opt/SUNWappserver7/domains/domain1/server1/config
There is a section under <java-config> with about 14 lines containing various <jvm-options>
I'll try adding this directive to the end of the <jvm-options> as follows:
<jvm-options>-Dhttp.keepAlive=false</jvm-options>

Configuration changes in Console

Hi,
I have a field having values separated with a ","for every 1000.
I do not want to have this. For example:
Length - 1000,00.00 WRONG
I want it to be like Length - 100000.00
We are getting the data from the client system for Length as 100000.00.
Can anyone in the forum suggest and help me to fix this issue.
I think we need to do this configurational change in the console.
I have already done the configurational change in data manager.
BR
SK

Hi,
I have a field having values separated with a ","for every 1000.
I do not want to have this. For example:
Length - 1000,00.00 WRONG
I want it to be like Length - 100000.00
We are getting the data from the client system for Length as 100000.00.
Can anyone in the forum suggest and help me to fix this issue.
I think we need to do this configurational change in the console.
Go in DM
Configuration OptionFormats- Deals in separator and save it.
Hope it help.
BR
Deepak
Edited by: Deepak Gupta on Jul 25, 2008 12:56 PM

Figures in Grid Control and Enterprise Manager Console don't match!

Hi,
I have just installed Oracle 10g Grid Control and it is managing an existing database on another server. It appears to gather information as expected in most areas (I can look at the alert log through grid control and it is up to date to the nearest 60 seconds as I expect) but today I looked at how full my undo tablespace is and the figures seemed completely wrong. When looking through grid control it showed me that Undo was 20% full. When I looked in the old java console, it showed it was 30% full!
Is there any reason why figures in Grid Control would not be accurate or up to date? I have no error messages and it seems to be gathering data fine.
Is it more likely the old java console is not accurate? (I've always found it accurate in the past I think!).
These are Solaris Sparc servers, Oracle 10.2.0.3 Grid Control monitoring an Oracle 10.2.0.3 database on a remote server via management agent.
Thanks,
Paula

And this morning my old console says 21%, and the new Grid Control says 14%. So they both seem to be gathering the info and putting it out but they have completely different opinions on how much space is used. I think that makes the whole thing fairly useless. Not so glad I spent an age trying to get grid control set up now!!!
Any thoughts much appreciated!!!!
Thanks,
Paula

Linstener showing wrong status in grid console

Listener is showing as unavailable in grid console while it is really up and accepting connections. Any ideas?
Thanks
S~

Also check the HOST you have used in the Listener configuration to ensure it matches the host GC is looking at in targets.xml. For instance, if it is looking for servername.domain.com, esnure that the Listener has the same as host instead of the IP Address or another mapping/representation

Problems accessing Grid Console through firewall

I am trying to set up my Grid console to be accessible pubically. My Network admin add a entry to the CSS for a public IP and site oms.domain.com which points to http://host:7777/em. I have been unable to get this to work though. I can get to the console localy on 7777 and 4889 but not using this public address.
I tried to add a proxy server to the OMS for the oms.doamin.com on prot 80 but this does not seem to have any affect.
Anybody have any luck configuring the console like this?
Thanks,
Brian

Reinstall the OMS just so I can access it through a firewall? The oms.domain.com address is registered in the CSS and points to my hostname:7777/em why would I need to reinstall? I figured there was just a config file within Apache that I would need to update to tell Apache to allow connections from the public address. Seems overkill to reinstall everything. This OMS is monitoring a couple hundred targets at this point. Reconfiguring all that would be slightly painfull.
Any other suggestions?

Stopping Agents From With the Grid Console

Hello.
We are using Grid COntrol 10.2.0.5.0 to monitor various 10g DBs. I have used blackouts in the past when I do various scheduled maintenance on our DBs. We need to physically relocate our Grid OMS and Repository to another RACK (not RAC). Both the OMS and repository reside on the same server being relocated. I have two questions related to this:
1.) Would blackouts be the best to do in this instance or simply shutting the various DB agents?
2.) Is there a way from the Grid Console to shut down (not black out) more than one agent at a time?
Thank you.
Matt

Blackout would be best because it design in this way. You can stop all agent by creating job host command but you will not get a succ message agent has stop or not so i would recommend go for blackout

Install Grid Control and use repository within a DataGuard configuration

Hello,
I need some information if anyone has experience in the following
We have severel database running in DataGuard standby configuration.
I want to install OMS 11.1 and use the repository in a primary and standby configuration.
My configuration will look like this:
host 1     Primary Repository database
     OMS service 1
host 2     Standby Repository database
     OMS service 2
During normal operation i want to have 2 OMS services running.
Whenever a failover is necessary, i want to active my standby database and run OMS service 2.
Can this be a working configuration?
Any help is appreciated.
Regards,
Ben

Hi.
As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
Good luck.
rgds
Kjell Ove

Oracle Change and Configuration Management packs

Hi,
We are looking at implementing the Oracle Change and Configuration Management packs.
I would be very interested to hear from anybosy who is currently using these packs.
I have done some preliminary tests, and am getting what seems like a very simple error, but i am at a loss as to how to fix it.
Will respond to replies with exact error and scenario.
thanks in advance.
melvyn

Hi Nayab,
We are looking to implement the change and configuration management packs, to automate our change control.
As part of my initial testing i have the following scenario...
I have three database (namely TEST_DB, QA_DB and PROD_DB) all configured and manageable in EM.
I have create a sample test schema in TEST_DB with tables, views, sequences, procedures and triggers.
Using EM, i am able to transfer the sample schema (with all objects) from the TEST_DB to the PROD_DB.
If i manually create the sample schema in the QA_DB, i am able to transfer the sample schema from the QA_DB to the PROD_DBm using EM.
When i try to transfer the sample schema from the TEST_DB to the QA_DB i get an error in the synchronization phase.
The capturing of the baseline, and the dictionary comparison phase complete successfully, but when i do the synchronization phase, i get
the follwing error...
SQL> ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
This seems strange because, it must have been able to see the destination database for it to complete the dictionary comparison phase, so
i cannot understand now why it cannot connect to the destination database to complete the synchronization phase.
any assistance would be greatly appreciated.
thanks
Melvyn

Please ensure that the applicationhost.config file is correct and recommit the last configuration changes made

I am receiving event ID 5189 on Server 2008 R2, IIS 7.5. I experience this error across a number of servers, each of which is running only the default web site, but have 600+ applications running on the default web site. Each application
has its own application pool. My point is, the applicationhost.config is rather large.
I have seen a number of posts on this error message, but my issue itself seems to differ somewhat. I am aware of a similar post: http://social.technet.microsoft.com/Forums/en-US/3128ee93-1319-4cc2-9257-003512caf476/event-id-5189-microsoftwindowswas?forum=exchangesvrgeneral
which points to KB http://technet.microsoft.com/en-us/library/cc734988%28v=ws.10%29.aspx
However, in my case, it doesn't seem that the extreme measures for this resolution are required. The error usually indicates a corrupted applicationhost.config that must be manually fixed, or otherwise the WAS service needs to be restarted, or the
server itself, etc.
In my case, the issue can usually be fixed by an application pool recycle, or at worst a stop/start. I have an application which is sensitive to recycles, and so we do not have periodic recycle events configured for this application, which is the bulk
of the applications on the servers. It seems to me that this issue is usually caused by the application being in use when there is an applicationhost.config change.
For instance, we have one application that we deploy using msdeploy. We found that when we ran an installation for this application via msdeploy, we were receiving this event, and we would subsequently get 500 errors in the application (sometimes the
application pool corresponds to that which is identified in the event log, sometimes it doesn't).    It seems like applications that were being hit at the time the applicationhost.config was modified by msdeploy were affected. In an attempt
to correct this, we moved from msdeploy to a batch file containing appcmd commands. This also did not resolve the issue.
I have another application which is installed using PowerShell commandlets. We started to notice that this script also caused the issue to occur on occasion. As I continued to identify different processes that resulted in the same issue, I came
to the conclusion that this is likely due to any change in the applicationhost.config. I assume the issue is that the applicationhost.config is modified during a read operation to the file by the application pool, or WAS service, and that the recycle
event, which corrects the issue, forces a re-read of the applicationhost.config, resolving the bad-read issue.
Has anyone else experienced this, or do you have any recommendations? My current work-around is to not install any applications during peak hours, and performing an IISRESET after installs are completed, to ensure application stability.
Message              : The Windows Process Activation Service failed to generate an application pool config file for application pool 'myAppPool'. The error type is '7'. To resolve this issue,
please ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
Id                   : 5189
Version              : 0
Qualifiers           : 49152
Level                : 2
Task                 : 0
Opcode               : 0
Keywords             : 36028797018963968
RecordId             : 324108
ProviderName         : Microsoft-Windows-WAS
ProviderId           : 524b5d04-133c-4a62-8362-64e8edb9ce40
LogName              : System
ProcessId            : 0
ThreadId             : 0
MachineName          : MyComputer
TimeCreated          : 3/3/2014 9:03:24 PM
ContainerLog         : system
MatchedQueryIds      : {}
Bookmark             : System.Diagnostics.Eventing.Reader.EventBookmark
LevelDisplayName     : Error
KeywordsDisplayNames : {Classic}
Properties           : {System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty}

As an update to this issue, after doing some research, it appears the behavior is related to a new feature in IIS7 called Application Pool Isolation (http://technet.microsoft.com/en-us/library/dd163536.aspx).
This new feature prevents cross-application spillage by isolating the configuration for each application pool in IIS. So in reality, an application pool never actually reads the applicationhost.config - that is just a master file, and each time it
is update, it triggers a change to the individual application pool configuration files, located in C:\inetpub\temp\apppools.
We did try setting Advanced Settings > Disable Recycling for Configuration Change to true, but after an IIS reset we were still able to reproduce the issue - worse actually, because in our test program, which continually hits the web
service, and also continually makes apphost.config changes, when the two events collide, the 500.19 issue precipitates; but after an additional change to the apphost.config, it seems that the additional changes will actually correct the issue (seemingly forcing
another recycle, which is also how we resolve the issue manually); after making this setting adjustment, once the 500.19 issue precipitates, additional changes to the apphost.config does not correct the problem, only a manual recycle corrects it. This
is the recycling.disallowRotationOnConfigChange property of the app pool. We also set the setting for recycling.disallowOverlappingRotation to True as well, with the same result.
We ARE able to prevent this issue by setting the C:\inetpub\temp\apppools\myapppool\myapppool.config to read-only, but for obvious reasons, this is not a desired work-around.
It seems like what is happening is that any change to the ApplicationHost.config is resulting in each of the C:\inetpub\temp\apppools temp application pool config files being updated as well, in addition to triggering an application pool recycle. It
seems to me the desired behavior would be that these files are only updated if the applicationhost.config changes are specific to that application pool - but that doesn't seem to be the behavior.
After turning on failed request tracing, I was able to narrow the error down more:
ModuleName
AnonymousAuthenticationModule
Notification
2
HttpStatus
500
HttpReason
Internal Server Error
HttpSubStatus
19
ErrorCode
2147942413
ConfigExceptionInfo
\\?\C:\inetpub\application\application\web.config ( 9) :Failed to decrypt attribute 'password'
Notification
AUTHENTICATE_REQUEST
ErrorCode
The data is invalid. (0x8007000d)
This seems to be pretty static. Trying to look into possible causes of this issue.

"Configuration changed. Restart the system" and then reboot on startup.

I have disabled WiMax in BIOS setup and now my x121e doesn't boot at all - just says that "Configuration changed. Restart the system" and reboots. When i press F1 to access bios setup - nothing happens. CMOS reset didn't help/

In service center they said that motherboard is glitchy and needs replacement.
So it was a hardware fault.

Installing and configuring Grid Control 10gR3

I want to install and configure Grid Control 10gR3, This is my first time experiance for this project, need help, what steps i should take? Like first create 10g DB as repository, then install grid control and how to install/configure agents, want to clear my concepts

Do not quite understand your question. The documentation link you provided is the Installation and Basic Configuration Guide for Grid Control 10.2.0.3. The document contains installation and configuration information.

Oracle 10.2.0.3 Grid Control and ReNew the IP Address

Hello
I have installed Grid Control and added few hosts and was working fine. But I have changed the IP address of Grid Server host. I mean I have been given new IP address for Grid Control host.
I have changes the ip address in /etc/hosts and reboot the server. But Grid Control Console page is not coming up on IE. Help Please...
Regards
Sindhi

It has been sorted out. As Grid Control use FQDN and it do not use IP address. Just I changes the IP address and FQDN was same. I was forgot to change IP address from Terminal Server where I was accessing Grid Control Console using IE. Thanks for you both to response my query.

Problem in starting OIM after moving it to isolated n/w and configuring AD

We have moved the machine where OIM was installed to an isolated n/w and then configured Active Directory on it.
But now we are unable to start OIM on it.
We are getting an error, Network adapter could not establish the connection.
Since the IP address of the machine has changed to 10.66.184.170, we have made the required changes in OIM_HOME\xellerate\config\xlconfig.xml file of OIM.
And JBOSS_HOME\server\default\deploy\xell-ds.xml file of JBoss.
Any pointers to the issue would be helpful.

Have you done any changes in Weblogic Admin Console ?
Login into Weblogic Console and see what it shows for "Undo All Changes" and "Activate Changes" button.
If "Activate Changes" in enabled then click on that and try to restart.

Grid Console and Configuration Change Console?

Similar Messages

Maybe you are looking for