Grid control 10g proxy change
Dear all.
I am new in oracle grid control 10g.
I just did the installation, but I have an critical alert " Number of Active Agents exceeded the critical threshold (1). Current value: 0"
As I understand this is because I put a proxy wile installing grid control and because of our proxy does not see local addresses grid controls does not see this agent.
How can I tell grid control to avoid proxy if he tries to connect to local address?
Have a look at $ORACLE_HOME\install\portlist.ini for the ports in use for your installation.
By Default, it uses the non-secure port of 4889 which I do not think requires opening.
Similar Messages
-
Dear all.
I am new in oracle grid control 10g.
I just did the installation, but I have an critical alert " Number of Active Agents exceeded the critical threshold (1). Current value: 0"
As I understand this is because I put a proxy wile installing grid control and because of our proxy does not see local addresses grid controls does not see this agent.
How can I tell grid control to avoid proxy if he tries to connect to local address?Try posting in Grid Control forum:
Enterprise Manager -
Alert Log File Monitoring of 8i and 9i Databases with EM Grid Control 10g
Is it possible to monitor alert log errors in Oracle 8i/9i Databases with EM Grid Control 10g and EM 10g agents? If yes, is it possible to get some kind of notification?
I know that in 10g Database, it is possible to use server generated alerts, but what about 8i/9i?
Regards,
MartinHello
i am interested in a very special feature: is it possible to get notified if alerts occur in alert logs in an 8i/9i database when using Grid control and the 10g agent on the 8i/9i systems?
Moreover, the 10g agent should be able to get Performance Data using the v$ views or direct sga access without using statspack, right?
Do you know where I can find documentation about the supported features when using Grid Control with 8i/9i databases? -
How to install Grid Control 10g Release 3?
Hello,
I need install Grid Control 10g Release 3 for Linux x86_64 on SUSE 9, and I need some tips about this instalation.
I need registry 3 database, 1 DB is 10g and the others are in 9.2.
Can I help me?
Thank'sIf you installed the 64-bit SLES-9, you are on the only platform that has a full install of 10gR3 Grid Control available:
http://www.oracle.com/technology/software/products/oem/index.html
Everyone else must install 10gR2 fully, then patch up to 10gR3.
Run runInstaller to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
- Install the 10gR3 agent install on any additional servers that require monitoring.
Load and execute orarun to enable the correct kernel options if you not done so already. It can be downloaded from www.suse.com/oracle. Comment out any IPv6 entries from /etc/hosts. The O/S should be setup similar to the AS 10.1.2 install doc for SLES9:
http://ftp.novell.com/partners/oracle/docs/iAS10gR2_sles9_install.pdf -
I m trying to install EM grid control 10G release 2, it prompt error on OMS configuration:
Failed status
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: starting opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'================================================================================
opmn id=testpc:6201
5 of 6 processes started.
ias-instance id=EnterpriseManager0.testpc
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=7112)
failed to start a managed process after the maximum retry limit
Log:
e:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
config tools failed command
rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn
Pl suggest remedy
Thnx13/10/23 09:34:58 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
13/10/23 09:36:38 10.1.2.0.2 Started
13/10/23 09:36:38 10.1.2.0.2 Started
13/10/23 09:36:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:37:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:37:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:38:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:38:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:39:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:39:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:40:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:40:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:41:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:41:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:42:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:42:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:43:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:43:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:44:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:44:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:45:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:45:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:46:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:46:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:47:20 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
13/10/23 09:48:59 10.1.2.0.2 Started
13/10/23 09:49:00 10.1.2.0.2 Started
13/10/23 09:49:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:49:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:50:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:50:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:51:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:51:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:52:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:52:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605 -
Installing Grid Control 10g Release 1 - Memory Check Fails
Hi to all,
I'm trying to install the Grid Control 10g on a Red Hat Enterprise Linux AS release 4 . I have configured the Computer OK , but when I try to install the Grid Control, the OUI says that the system only has 1 MB of RAM. The computer has 2 GB and only 150 MB is being used, what is the problem? what can I do?
Thanx for all.
P.D.: Sorry for my English.Hi!
Those are my kernel parameters:
kernel.sem = 256 32000 100 142
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
fs.file-max = 206067
net.ipv4.ip_local_port_range = 32768 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
And those are the Kernel Parameters Requirements:
Red Hat Enterprise Linux 4.0
semmsl = 250
semmsl2 = 250
semmns = 32000
semopm = 100
semmni = 128
shmmax = 536870912
shmmni = 4096
shmall = 2097152
filemax = 65536
ip_local_port_range = 1024 65000
rmem_default = 262144
rmem_max = 262144
wmem_default = 262144
wmem_max = 262144
As you can see all the parameters are set correctly. -
Step by Step Installation of Grid Control 10g on windows
Hi,
I need to install Grid Control 10gR2 on windows XP. Is anybody have steps for installations of Grid Control 10g on windows? (With snapshots will be advantage) . Is it possible to install Grid Control 10gR2 on windows XP?
please provide me a link and where will I get link for downloading?
Thanks in advance.
Regards,
ManishHi Manish;
I need to install Grid Control 10gR2 on windows XP. Is anybody have steps for installations of Grid Control 10g on windows? (With snapshots will be advantage) . Is it possible to install Grid Control 10gR2 on windows XP? Please follow below and see its helpful for your issue:
http://www.stanford.edu/dept/itss/docs/oracle/10gR2/install.102/b31288/emqwn.htm
please provide me a link and where will I get link for downloading?Please follow below and see its helpful for your issue:
http://www.oracle.com/technology/software/products/oem/index.html
Regard
Helios -
Steps to install Oracle grid control 10g on windows
dears ,
kindly I need to install oracle grid control 10g release 5 on windows
so please if any one have a detailed step-by-step document for that post it to me ASAP
Regards.Hi;
Please check below link
Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
Regard
Helios -
OMS Configuration Failed In the Process of Installing OEM Grid Control 10g
Hi every one,
i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
here is i am getting the error:
details says that are as follows
oui-25031 oracle.sysman.emcp.agent.agentplugin,
so i followed the steps and drop the sysman user with cacade option
again i got the same error,
Environment:
Microsoft Windows XP Professional SP3,
Oracle 10G 10.2.0.1.0 (Already Installed)
Dell Inspiron 530
Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
have enough hard disk.
Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
i have seen the error messages in this forum many are on unix environment.
any views on windows operating system?
Thank You.hi,
before you install grid, try and patch the database to a later release, 10.2.0.4
had this issue in work and patching the db resolved the issue.
I did install database software only, then patch then create database, then install grid
regards
Alan -
Hello,
I have installed OEM grid control 10g and able to connect to the console via the sysman user id.
I am trying to configure email notification, but though I put all credentials properly I am not able to receive any emails.
I was looking at Oracle documentation and it says....
The SMTP server is the name of the mail server (for examplemail.acme.com).
For Linux, the SMTP server must be the local host name.Use the fully qualified host name (including domain
Does the smtp server need to on the localhost ? can't it work with a smtp server on a different host than the grid control box ?
Any advice will be much appreciated.
S.The smtp service doesn't need to be on the host you installed grid control, Grid control can use any smtp server as long as it can reach it.
Regards
Gokhan -
Oracle Grid control 10G R2 failed
Hello all;
I just have installed Oracle Grid control 10G R2 on my PC ( xp sp2 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
Can you please help me in this issue .
Regards,Have a look at the logs at:
C:\grid_control_home\agent10g\cfgtoollogs\omsca
FJFranken -
OEM Grid Control 10g Deployment
Hi,
We are planning to deploy OEM Grid Control 10g (with Diagnostics and Performance Management packs) for management and monitoring of following targets:
Oracle Databases (9.2.x, 10.x) - 12
Oracle Application Servers 10g - 6
OEM documentation states that for smaller deployments (targets < 100); following h/w specs would be sufficient:
CPU: 1 (3GHz)
Memory: 4 GB (2GB for OMS, 2GB for OMR)
Disk Storage: 12 GB (2GB for OMS, 10GB for OMR)
I want to know:
i) Will that amount of disk storage will be sufficient?
ii) What would be the growth rate of OMR (Oracle Management Repository)?
iii) What other factors should be considered?
All suggestions are welcome.
Regards,
PreetHi Preet,
We had a 200+ (now 700+) target install in a major Telco and at that time
the repository database size was just 25 GB. So 10 GB for the database
itself should be ok. However sounds like you are crunched for space.
Bear in mind you need space for the installation of the EM10g OMS home,
the Agent Home and the Database home. So I dont think 12 GB is enough
for you. Try it out in test.
Regards,
Porus. -
Database Grid Control 10g and Oracle 8i v.3....
Hi ,
Is it possible for Database Grid Control 10g to administer and monitor the Oracle 8i v.3, namely Oracle 8.1.7. database ...?????
Many thanks ,
SimonYes, that is possible. We are using OMS 10.2.0.2, Agents 10.2.0.2 to monitor 8.1.7.4 Databases.
Also check MetaLink Notes:
377462.1 - ORA-00942 When Trying To View Tablespaces For An 8.1.7.4 Database
373394.1 - Receiving ORA-1031 When Gathering Metrics Against 8.1.7.4 Database From Grid Control 10.2
Regards,
Martin -
Install grid control 10g Server 2003
Hello all;
I have installed Oracle Grid control 10G on my PC ( server 2003 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
the file OMS_HOST/sysman/logs/emoms.log
2011-04-04 09:30:20,250 [Thread-18] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2011-04-04 09:30:20,250 [Thread-18] ERROR em.notification unregisterOMS.1417 - Error unregistering: Exception d'E/S: SO Exception was generated
java.sql.SQLException: Exception d'E/S: SO Exception was generated
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:217)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1331)
at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:422)
at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:330)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:285)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:178)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:158)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:359)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1303)
at oracle.sysman.emdrep.notification.NotificationMgr.unregisterOMS(NotificationMgr.java:1408)
at oracle.sysman.emdrep.notification.NotificationMgr.destroy(NotificationMgr.java:1867)
at oracle.sysman.emSDK.svc.ServiceUtil.cleanupServices(ServiceUtil.java:212)
at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:851)
at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5980)
at com.evermind.server.http.HttpSite.destroy(HttpSite.java:936)
at com.evermind.server.http.HttpServer.destroy(HttpServer.java:632)
at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:2102)
at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:39)
at java.lang.Thread.run(Thread.java:534)
the file installAction.log
Start Processing configuration tool Enterprise manager Website Configuration Assistant ....
Preparing for copying C:\OracleHomes\oms10g\sysman\log\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\sysman\log\*
Adding the file C:\OracleHomes\oms10g\sysman\log\emctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\pafLogs from the file path expanding...
Completed copying file C:\OracleHomes\oms10g\sysman\log\emctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.trc to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.trc
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.log to C:\OracleHomes\oms10g\cfgtoollogs\emoms.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.trc to C:\OracleHomes\oms10g\cfgtoollogs\emoms.trc
Number of file(s) copied is 5
Number of directories copied is 0
End Processing configuration tool Enterprise manager Website Configuration Assistant
Start Processing configuration tool DCM Repository Backup Assistant ....
Preparing for copying C:\OracleHomes\oms10g\dcm\logs\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\dcm\logs\*
Adding the file C:\OracleHomes\oms10g\dcm\logs\daemon_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\dcmctl_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\emd_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Backup Assistant
INFO: Le script "C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" contient toutes les commandes qui ont échoué, ou qui ont été ignorées ou annulées. Ce fichier peut servir à exécuter ces assistants de configuration en dehors d'OUI. Vous pouvez être amené à mettre à jour ce script avec les mots de passe (éventuels) avant de l'exécuter.
INFO: Created a new file C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands.bak
INFO: Created a new file C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands.bak
GRAVE: OUI-25031 : Echec de certains assistants de configuration. Il est vivement recommandé de les relancer immédiatement. Une exécution incorrecte d'un assistant marqué comme Recommandé signifie que le système est mal configuré.
1. Dans le panneau Détails de l'écran de l'assistant de configuration, consultez les erreurs à l'origine des échecs détectés.
2. Corrigez ces erreurs.
3. Sélectionnez les assistants ayant échoué et cliquez sur le bouton Réessayer pour les relancer.
INFO: Sélection utilisateur : Oui/OK
file hosts
127.0.0.1 localhost.localdomain localhost
192.168.2.195 srvmid1.com.tn srvmid1
please you ca help me...Check if the last post in http://cn.forums.oracle.com/forums/thread.jspa?threadID=477659&tstart=0&start=15 can be the solution for you. Remember, the error is in the last step of the configuration process. So it only concerns the agent. The OMS and OMR were (as I see it) correctly configured.
Eric -
Is not there grid control 10g for windows 64bits... ?
Hi
I checked the softwares in Oracle.com and I do not find the grid control 10g for windows 64bits...... only for 32bits.
Can I use the software of 32 bits in the 64bits OS ?
I downloaded the 32bits software and I tried to install it but the OUI dissapear suddently....
ThanksSurprising but I think you are correct, there is no 64 bit Windows release available for EM(Grid Console), neither on OTN nor on Edelivery. In a general speak, yes 32 bit version should get installed on 64 bit.
HTH
Aman....
Maybe you are looking for
-
Hi All, While executing Sale order in the R/3 system we are getting this message. Error in calling up function 'BAPI_APOATP_CHECK' in APO server 'xxxx': Table /SAPAPO/ORDM is unknown. Please help us in this issue. Thank you, Durga
-
To add new Line Items in Accounting Document using BTE
Hi, We have a requirement to add new GL line items while doing PGI through VL02N. The requirement is as below. Please confirm, if we can use BTE 1120 for this and if yes, how to use it to add new line items. Orig line items: Item PK Acct No USD 001 9
-
Help on removing a enhancement implementation
Hi all, I created an enhancement. The enhancement has no code in it. It was created by error. It is not in any change request. I tried to recreate the enhancement with an empty core, but the system always tells me that it already exists. How can fix
-
I Need help printing a brochure doubled sided on a hp d145 printer any one got any ideas on ho rto do this
-
Unable to connect ePrint to Google Cloud Print
I keep recieving error: Could not get printer information from HP. when trying to connect to Google Cloud Print. This question was solved. View Solution.