Grid control and all its services start by itself

Hi all,
We've got 10g OEM Grid Control running on RHEL4. It was working without the server reboot for about two month. Yesterday, I rebooted the server and was veeeery surprised when connecting to the repository it turned out that it's already started. listener was started as well and Grid Control page was working perfectly...
/etc/oratab file contain all "N" there. My question is such is this a GC-only feature and if yes, where exactly this automatic startup script resides? (Because I know that people always struggling with the automatic startup process on Linux and they need to create their own scripts for it.) Probably, because it's Grid and it needs to be up and running always, there is some parameter, that I'm not aware of?
PS: I tested it three times, shut down the database and reboot the server, reboot server without shutting down the DB, shutting down the server etc.. Each time listener, DB and OMS services started by itself...
Please, advise where to take a look about it.
Thanks,
M.

You can find the reason why here --> Oracle® Enterprise Manager Grid Control Installation and Basic Configuration
10g Release 3 (10.2.0.3.0)
Part Number B40103-01
What's New
Automated Startup Scripts (UNIX Only)
In this release of Enterprise Manager, the startup scripts to run the Oracle database, Management Service, listener, and agent are automatically executed in case a machine reboots. The services that are automatically started depend on the installation type that you chose.
~ Madrid
http://hrivera99.blogspot.com/

Similar Messages

  • HT5527 I have had my storage reduced once already.  In the process they removed my "Save" mailbox and all its contents.  I do notcare about contents so much as starting a new Save box.  How?  (OS X 10.7.5)

    My iCloud storage is being reduced.  I have already had it reduced once.  In the process they removed my "Save" mailbox and all its contents.  (One would think that that would be the last thing they removed.  But they took that and the "Trash" mailbox, yet left several thousand old and read messages which were in my "Inbox".)  I do not expect to get the "Save" contents back, but I would like to restore the "Save" mailbox, so that I can start from scratch saving msgs in it again.  But I cannot figure out how to do that.  When I go to "Mailbox" on the top line (between View and Message) and select New Mailbox I get a dialog box in which I can name a new mailbox.  When I type Save, for the name of the new Mailbox I get a response; "The mailbox 'Save" already exists."  But I cannot find it.
    Thanks,  Bill Burner

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • I had to restart my mac desktop because it froze now I went to restart it and all its doing is beeping at me. Does any one know how to get it to start again Please help

    I had to restart my mac desktop because it froze now I went to restart it and all its doing is beeping at me. Does any one know how to get it to start again Please help

    Welcome to the Apple Support Communities
    It shows a hardware issue. How many beeps do you hear? See > http://support.apple.com/kb/HT2538

  • The email I've been using for years has terminated all its services.  I was using it for my icloud id.  Now my ipad keeps popping up asking for its password.  How do I delete this icloud id and change to a new one?

    The email which I used for my icloud id has stopped all its services.  I cannot gain access to this email anymore.  I am able to change my Apple ID but unable to change iCloud ID. My ipad 2 keeps popping up asking for the icloud password.  Can anyone help me on this issue?  Thanks...

    Hello, luciawong. 
    Thank you for visiting Apple Support Communities. 
    You may find this article helpful with the issue you are experiencing.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Regards,
    Jason H.

  • Grid Control and Data Guard Setup

    Hi,
    I have 4 PCs on which I wish to test the following:
    1. OEM Grid Control 10.2 - Console + Service + Agent
    2. Data Guard feature with Broker
    3. Standby Setup for a Primary Database.
    I will create the Primary DB on one Linux PC.
    Standby DB using Grid Control & DataGuard on second Linux PC.
    The Third PC is also Linux but the fourth PC is Windows XP.
    Please guide me in understanding the following:
    1. On which PCs should I install OEM Grid Control 10.2 - Console + Service + Agent?
    2. On which PC should I setup DB Broker?
    Please assume that I will use Oracle 10.2 Softwares and Linux x86 version.
    Regards

    well why don't you go ahead and test?!
    Test and see whether you want to put oms, console all one machine, or whether you want to separate out the componests (you'll need an agent on each box regardless). I have no idea what the specs of your machines are, so why don't read the documentation on Grid and dataguard, see what the recommended settings are and then plan what you want to do.
    Bazza

  • Install Grid Control and use repository within a DataGuard configuration

    Hello,
    I need some information if anyone has experience in the following
    We have severel database running in DataGuard standby configuration.
    I want to install OMS 11.1 and use the repository in a primary and standby configuration.
    My configuration will look like this:
    host 1     Primary Repository database
         OMS service 1
    host 2     Standby Repository database
         OMS service 2
    During normal operation i want to have 2 OMS services running.
    Whenever a failover is necessary, i want to active my standby database and run OMS service 2.
    Can this be a working configuration?
    Any help is appreciated.
    Regards,
    Ben

    Hi.
    As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
    The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
    The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
    Good luck.
    rgds
    Kjell Ove

  • How to completely remove safari and all its files?

    I have Windows Vista and I need to COMPLETELY remove Safari and ALL its files. It is important that it is completely removed, and I've already tried simply uninstalling (from "uninstall a program" in the control panel)it but it doesn't get rid of EVERYTHING safari. I think some of the files are damaged or something because Safari won't open. How would I do this?
    Message was edited by: Friends of Apple

    Just go into Control panel and Uninstall programs. Select Safari and select uninstall.

  • Grid Control and CEP

    Hi,
    We are building for one of our clients a solution that is comprized from several products. One of them is CEP. For all theother products we can use Grid Control to "watch" the status and "health" of the products but we could not find any reference to CEP.
    We know that we can get the statistics on the EPNs using Visualizer or JMX but we prefer to have it all in one place. Is it possible to use Grid Control?
    Is there any information regarding Grid Control and CEP?
    Thanks,
    Shimon

    Hello,
    There is currently no support for CEP in Grid Control.
    andy

  • When to install Grid Control and when to just use 10g built in?

    1. is Grid Control really the only way to Enterprise Manage multiple databases? (if not, how do i switch from different databases on the 10g built in EM)
    2. I only have about 10 databases, is Grid Control overboard?
    3. Is it a bad or good idea to install GC on the 10g server?
    thanks,

    Hi.
    As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
    The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
    The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
    Good luck.
    rgds
    Kjell Ove

  • Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button and in charge the white screen comes for 2 second and goes

    Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.

    Hello Ritugor,
    I would be concerned too if my iPhone was not powering on.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How to check if a user has clicked on a digital control and changed its value?

    Greetings !!!
    I am looking for a simple way (without using Windows messages)of knowing if an user has clicked on a digital control and changed its value.
    I have tried the key focus property; but I have to click twice to make it work.
    If somebody knows a better solution; please let me know.
    Thank you in advance for your help

    If you just want to know if the value has changed you can put it in a while loop and use shift registers to see if the value has changed.
    Brian
    Attachments:
    Changed.vi ‏22 KB

  • In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

    In my Iphone 5, Nothing on my App Store is working,  its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

    settigns>itunes and app store to make sure you are signed in.. If  you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
    also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
    one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

  • How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

    how can I save a page and all its component parts in a single file, like IE does as an MHT?
    It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
    It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
    I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
    Thanks
    MG

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • Hi I want to buy an unlocked iPhone 5in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.

    Hi I want to buy an unlocked iPhone 5 in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.
    Thank you

    Apple Online Store sells unlocked iPhone in the following countries: Australia, Austria, Belgium (French, Dutch), Brazil, Canada (English, French), China, Czech Republic, Denmark, Finland, France, Germany, Hong Kong (English, Chinese), Hungary, Ireland, Italy, Luxembourg, Malaysia, Mexico, New Zealand, Netherlands, Norway, Poland, Portugal, Singapore, Spain, Sweden, Switzerland (French, German), Taiwan, Thailand, United Arab Emirates, United Kingdom, and United States.
    You can probably be absolutely sure any other source will be carrier locked
    It also appears that only Zain offer unlocking (of all the ME carriers )  in Jordan and Bahrain
    A ME iPhone 5  ( A1429 GSM )will not  work on US LTE when you return 

  • My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data

    My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data
    Can anyone help me

    Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    All media content will be erased during the first sync, but you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

Maybe you are looking for