Grid Control for different rowSet

Can i put 2 different rowSetInfo to display inside 1 grid control and how ?

<BLOCKQUOTE>quote:<HR>Originally posted by JJ:
Can i put 2 different rowSetInfo to display inside 1 grid control and how ?<HR></BLOCKQUOTE>
No, this is not supported.
If that is what you wish to do, you will have to either modify the GridDataSource so that the table model implementation retrieves data from both RowsetInfo (ScrollbaleRowsetAccess).
null

Similar Messages

Grid Control for windows

Hi Experts,
We're trying to download and install Oracle grid control for windows 64bit but we can't find any 64bit release!
Can we safely download and install Enterprise Manager 11g Grid Control Release (11.1.0.1.0) - Windows 32bit from http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html ? or should we be installing a different version??
Should Grid control be installed on the DB server in the 1st place or should it be installed on another server?
Current Oracle Software: 11.2.0.1 64bit.
Server OS: Windows 2008 Server 64bit.
Can you kindly let us know.
Thanks

We finally got our facts right..
The Grid Control Enterprise Manager comes only in 32 bits.. However the Grid Control agent that needs to be installed on the DB server comes in 32/64bits and is supported under different OS platforms.
Metalink (Doc ID 412431.1) shows the Oracle Enterprise Manager Grid Control Certification Checker/matrix that we found extremely useful.
Enterprise Manager Grid Control comes with the basic features and is free to use. Any extra features are considered addons and do need to be properly licensed.
Thanks

Access control for different user groups in APEX 4.0

Hi guys,
in Apex 4.0, is there any way to use the access control page to configure access control for different user groups?
The access control page currently only has an access control list by users with 3 privileges namely, Administrator, Edit & View where Administrator has the highest access level & View the lowest. Therefore 1 user cannot have more than 1 different privilege, however if the user belongs to 2 or more different groups then we can control what access he can have in a more fine grained manner. We also want to have more than the 3 privileges given.
Can we assign different groups to different users and let them have different privileges to be configured by page, region, process or item level?
Now Apex will create 2 tables, Apex_Access_Control & Apex_Access_Setup to store the application access control mode & access control list. It will also create 3 authorization schemes "access control - administrator", "access control - edit" & "access control - view" based on the 2 tables.
Does this mean we have to change the table structures & edit the authorization schemes to suit our usage? We are reluctant to do this because if we upgrade to a newer version of Apex then we would have to merge our pl/sql coding with Apex's updated code.
How can we auto-configure more than the 3 authorization schemes in the access control page? Is there any way to achieve a finer grain of access control based on the current access control administration page given by Apex without writing it ourselves?
We are afraid that we may have missed something on Apex access control & do not want to reinvent the wheel.

Hi Errol,
to build your own application authorization scheme around the security model supplied by Apex for administration of the Apex environment would be a bad idea.
This was never intended for authorization scheme management in custom built Apex applications, it was solely intended to control access in the Apex environment overall. The API for it is not published, and making changes to it, such as adding more roles, would run the risk of breaking the overall Apex security model. It would not be supported by Oracle and Oracle would not guarantee the upwards compatibility of any changes you make in future versions of Apex.
In short, you should follow Tyson's advice and build your own structure. As he indicated, there are plenty of examples around and provided your requirements are not too complicated, it will be relatively simple.
Regards
Andre

Set up grid control for Oracle application 11i

Hi,
I want to set up the grid control for his/her application 11i.
Our system is on 11.5.10.2 and the database is 10.1.0.4
Is there any good documentation for this?
Thanks,
Lily

Yes, please have a look at Metalink Note 308320.1.
Cheers,
B.

How to Install Grid control for 10g (WINDOWS)

Dear All,
This is the first time i am going to test on Grid control. i have lot of droughts from the beginning...
what is the first step to install, database or grid control tool.(*Windows*)
i am downloading the below software from e-delivery
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 1 of 2) V15628-01 Part 1 of 2 1.1G
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 2 of 2) V15628-01 Part 2 of 2 1.1G
Is the above software containing _10g database alone_, or its with Grid control, if its with grid control kindly let me know how to install ,, kindly don't give me oracle documents. please explain me int his blog itself or some different blogs.
Any one explain me what is the step i have to take after this,, ??
Thanks
Abdull
Edited by: user9111553 on Nov 23, 2010 12:01 AM

Hi Miguel,
Could you help me? Full and base version of what?
For instance, i have Oracle 10.2.0.4 version and did not check EM during instalation oracle sw. So what is the first step to install and configure Grid Control? i downloaded Grid Control and read readme file. There is information that i need to install OEM and then Grid Control. did i understand right way or misunderstood? could you show me steps for implement Grid Control with 10g on Windows?
regards and thanks,
rustam

How to configure EM Grid Control for more than one databases?

Hi,
I'm configuring EM on Oracle 10gRel1 on Linux. I have more than one databases in the server, and I want use IE at my PC to monitor the databases on Linux server. I can configure and access the Grid Control Console by emca for first database, but cannot configure for the second one, unless I remove the first one configurration. How can I configure EM for more than one databases?
Thanks.

Thank you everybody.
Yes, I'm talking about DBConsole rather than Grid Control (sorry for misuse the term). I managed to set up DB Console for every DB in the same Linux box (10Rel1). What I did is:
1) stop db console and agent with emctl
2) remove repository with RepManager
3) config with emca
Then I can monitor individual databases from my PC (but have to login with different port).
I'm thinking mybe I should use Grid Control instead.

How do I set up different hardware controls for different patches in mainstage?

I'm using Mainstage 3.0.4 and a Novation Impulse.
I created a concert, with the drawbar organ as my first and most important patch. I assigned the hardware controls on the Novation exactly how I wanted them, with the sliders controlling the drawbars, and the rotary controls changing the distortion, reverb, etc. It was perfect. I was happy.
Then I added a new instrument (a new patch, not a new channel or anything like that), a Wurlitzer. Once again I assigned my hardware controllers as I wanted them, and was happy with that.
When I saved the concert, and went back to my organ patch, my settings didn't stay the same, but they still work for the Wurli.
My question is this - do I have to have a new concert for each instrument patch I want to use, if I need to assign different controllers for each patch? This would be stupid! If not, what I am doing wrong, that I can only set up one set of hardware controls per concert, instead of per patch?
Thank you in advance for the help!!!

Hi
matthewabennett wrote:
CCTM, thank you! I have a small idea what you mean, but I still can't implement it :-)
You have some fundamental choices:
A) If you want to see Drawbar Controls for organ Patches, and then have other types ( knobs/sliders etc) for other Patches, you could simply make all the screen controls you need, then assign and map them as required.
B) you could simply use drawbar screen controls only and remap them to other parameters for non-organ patches
C) You could use Smart Controls ( which will update their appearance in a 'smart' way
D) You could make your own Drawbar type controls using standard faders
The basic process in a 2 part thing:
Assign incoming MIDI messages from your controller to Screen Controls in Layout mode. This is global for concert. Per patch ( or Set or globally for the Concert) you then map the Screen Controls to parameters for each patch as needed.
Smart Control MIDI assignment is done in the Assignments and Mappings pane
CCT

Enterprise manager Grid Control for Windows 64 bit

Hi,
I am looking for Enterprise Manager Grid Control 10.2.0.3 for Microsoft Windows Server 2003 R2 64 bit. On OTN and metalink I can only find for 32 bit. Can anyone suggest where I can find the same.
Thanks in Advance.
SK.

The OMS is on Win x86 and supports Agent on Win x64 target.

OEM 10g (10.2.0.1) Grid Control for Linux86 part 2

Hi hussein/helios,
Firstly....
How do you install management agent for linux86?
I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1.
Do I need to install a "management agent" on this server, to be able to manage my EBS R12.1?
Secondly....
I want to manage our EBS 11i which resides on another server (remote).
I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN,
and put it to the target server.
I unzip it following the readme.txt to the
1. Download the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN.
2. Copy the downloaded file to <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory.(create <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory, if it doesn't exist.)
3. cd <OMS_HOME>/sysman/agent_download/10.2.0.2.0
4. <OMS_HOME>/bin/unzip Linux_Grid_Control_agent_download_10_2_0_2_0.zip
5. If agent_download.rsp doesn't exists at <OMS_HOME>/sysman/agent_download/10.2.0.2.0 directory then:
 a. mv agent_download.rsp.bak agent_download.rsp
 b. edit agent_download.rsp and modify s_OMSHost="%s_hostname%" and s_OMSPort="%s_OMSPort%" with the correct OMSHost and OMSPort values.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
 eg. s_OMSHost="stadv26.us.oracle.com"
 s_OMSPort="4889"
6. Edit <OMS_HOME>/sysman/agent_download/10.2.0.2.0/linux/agentDownload.linux and modify OMShost=%s_OMSHost% and httpPort=%s_OMSPort% with the correct OMSHost and OMSPort.(However, even if you are specifying a secure Management Service, you must still enter the non-secure port number here)
 For eg. OMShost =stadv26.us.oracle.com
 httpPort=4889
7. Follow the agentDownload instructions from 5.4 section of Oracle Enterprise Manager Installation and Basic Configuration Guide.But when I got to #7 ....the documentation is not clear, as usual there are lots of injected unrelated topics which make the documentation "topsiturvy" and very hard to follow.
Can you just tell me, based on your experience how to install the agent? Someone told me to run OUI?
But I can not find it on the unzip >Linux_Grid_Control_agent_download_10_2_0_2_0.zip file
Thanks a lot.
Ms K

hi dear,
I want to upgrade my OMS server 10.2.0.1 to 10.2.0.5
I downloaded the patch 10.2.0.5 and read the README.txt
Part of the README is:
1.2 Enter the following command to extract the installation files:
$ unzip GridControl_10.2.0.5_<platform name>.zip
This command extracts the following files and directory:
|- p3731593_10205_<platform name>.zip
|- 3731596.zip
|- 3822442.zip
|- README.txt
|- doc/
NOTE: <platform name> will be "LINUX" or "Win32" depending on the platform for which you are installing. For installing Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), refer to the Release Notes available in the "doc" directory.
- p3731593_10205_<platform name>.zip is the ZIP file that contains 10.2.0.5 patch set software.
This zip can be used for:
- Upgrading Oracle Management Service Release 2 (10.2.0.x) or higher to Oracle Management Service Release 5 (10.2.0.5)
- Upgrading Oracle Management Repository (sysman schema)
- Upgrading Oracle Management Agent on the host where OMS is running.
NOTE: This will not upgrade the database in which the Management Repository (sysman schema) resides.
- 3731596.zip is for patching Management Agent by staging the patch set. To understand how you can apply the Management Agent 10.2.0.5 patch set, refer to method 2 described in section 4.3.3 "Upgrading Management Agent - Multiple Hosts at a Time" of the Release Notes. The Release Notes can be found in the "doc" directory.
- 3822442.zip is for patching Management Agent by distributing the full patch set. To understand how to apply the Management Agent 10.2.0.5 patch set, refer to method 1 described in section 4.3.3 "Upgrading Management Agent - Multiple Hosts at a Time" of the Release Notes. The Release Notes can be found in the "doc" directory.3731596.zip - by staging
3822442.zip - by distributing
Does the two above have the same function or purpose?
I can not understand the meaning of the two :( . which do you think is the right one for my setup?
Thanks a lot

Using Grid Control for Bespoke Applications

Customer's primary application is in-house built. How can he integrate the Grid Control with it?

There is a link for the Extensibility Guide here:
http://www.oracle.com/technology/products/oem/extensions/index.html
It describes what it takes to create a Management Plug-in (new target type) which can be integrated into the EM Console.

Grid Control for a cross-platform migration

Is it possible to use Enterprise Manager Grid Control to execute a cross-platform migration? A co-worker suggested checking this out, but he wasn't sure if it would work or not.

Cross-Platform transportation is a complex process and done by RMAN utility. Don't rely on GridControl, better follow the roadmap in
http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm#sthref1379
Werner

Binding UI controls with different RowSets in same ViewObject

Hi,
I have a ViewObject vEmp and created two RowSet rowSet1 and rowSet2 for vEmp.
What I want to do is to bind two different JList to these RowSets. These RowSets contain different data as I have used Named Bind Variables.
Can anybody please explain me how can I achieve this?
Thanks.

Hi,
if you use ADF Swing then you do this through the binding layer.
1) Open the pageDef file of your ADF Swing application
2) In the executable section, create a second iterator for the VO
3) Set the RSIName property of this second iterator to the name of the RowSetIterator created in code
4) Create the list box and use the second rowset iterator for the list
Frank

"Copy Control" for different customer and also different sales area

Hi, expert.
I would like to copy sales order from one to the others. However, I would like to change only "Partner Information and its sales area". For "Item Data", I would like to keep it same as original document. For example,
Sales Order1: Customer ID = "1111111" and Sales area = "1000/10/10".
I would like to copy to Sales Order2:
Sales Order2: Customer ID = "1111112" and Sales area = "2000/20/20".
P.S "Sales Organization 1000 assigned to company code 1000. And Sales Organization 2000 assigned to company code 2000"
I have tried to do combination between different "Data transfer routines and Copy requirements". However, I am still not get my solution
Everyone please share idea.
Thank you,

Dear John,
Actually, I have tried with copy requirement 2.However, it works for copying a different customer with the same sales area as original. Yes, I may need to ask developer to solve my solution. But I would like to keep it to be the last choice. I tried to search "How to copy document between inter-company businees"; but the I still not get what my custome's want. Anyways, thank you very much for sharing idea.

Data Guard configuration for RAC database disappeared from Grid control

Primary Database Environment - Three node cluster
RAC Database 10.2.0.1.0
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Standby Database Environment - one Node database
Oracle Enterprise Edition 10.2.0.1.0 Single standby
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Grid Control 10.2.0.1.0 - Node separate from standby and cluster environments
Oracle 10.1.0.1.0
Grid Control 10.2.0.1.0
Red Hat 4.0 2.6.9-22 32bit
After adding a logical standby database through Grid Control for a RAC database, I noticed sometime later the Data Guard configuration disappeared from Grid Control. Not sure why but it is gone. I did notice that something went wrong with the standby creation but i did not get much feedback from Grid Control. The last thing I did was to view the configuration, see output below.
Initializing
Connected to instance qdcls0427:ELCDV3
Starting alert log monitor...
Updating Data Guard link on database homepage...
Data Protection Settings:
Protection mode : Maximum Performance
Log Transport Mode settings:
ELCDV.qdx.com: ARCH
ELXDV: ARCH
Checking standby redo log files.....OK
Checking Data Guard status
ELCDV.qdx.com : ORA-16809: multiple warnings detected for the database
ELXDV : Creation status unknown
Checking Inconsistent Properties
Checking agent status
ELCDV.qdx.com
qdcls0387.qdx.com ... OK
qdcls0388.qdx.com ... OK
qdcls0427.qdx.com ... OK
ELXDV ... WARNING: No credentials available for target ELXDV
Attempting agent ping ... OK
Switching log file 672.Done
WARNING: Skipping check for applied log on ELXDV : disabled
Processing completed.
Here are the steps followed to add the standby database in Grid Control
Maintenance tab
Setup and Manage Data Guard
Logged in as sys
Add standby database
Create a new logical standby database
Perform a live backup of the primary database
Specify backup directory for staging area
Specify standby database name and Oracle home location
Specify file location staging area on standby node
At the end am presented with a review of the selected options and then the standby database is created
Has any body come across a similar issue?
Thanks,

Any resolution on this?
I just created a Logical Standby database and I'm getting the same warning (WARNING: No credentials available for target ...) when I do a 'Verify Configuration' from the Data Guard page.
Everything else seems to be working fine. Logs are being applied, etc.
I can't figure out what credentials its looking for.

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Grid Control for different rowSet

Similar Messages

Maybe you are looking for