Grid control Installation.
Hello Everybody,
I have to immplement the 10g grid control and the scenario's goes like this.
I have database installed on HP-UX 11.11i and a Windows server.
Now can I install the grid agent on HP-UX(database server) and a OMS(repository) on Windows server 2003.
Is there any compatibility issues.
Eagarly waiting for your responses?
Thanks in advance.
Hi,
What I understood out of the description is ...
You have 2 servers
1) HP UX ====> Already one database is running which you want to monitor after implementing grid control
2) Windows server =====> Here you are planning to install grid control 10g mean OMS repository as per your quote
First,
You can install Grid Control in any of the 2 servers it is available for HPUX as well as Windows.
Grid control monitors targets (i.e. databases, hosts, listeners etc.) through Agent software which is available for all the
flavours of unix and windows. So, you can install grid control on any of the box and monitor both the boxes. There will
be no compatibility issues.
Let me know if you have any questions or concerns.
Best Regards,
Nirav
Similar Messages
-
hi
i am trying to install the OEM grid control on my machine configured with statis IP address
After installation when configuration assistants start to configure. i face the following error continuously.
java security configuration assistan fails with the following errors
jaznca.log at "E:\oracle\product\10.1.0\em\cfgtoollogs" contains the following
Oracle JAAS [Fri Mar 10 18:01:55 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: oracle.ias.sysmgmt.exception.TaskException: TaskMaster initialization failed.
Root Cause: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
Resolution: check the system configuration and make sure that the client can access the repository database.
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
I started the OPMN manually and clicked on RETRY to configure this assistant. again failed and now
jaznca.log contains the following
Oracle JAAS [Fri Mar 10 18:06:50 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: java.lang.Exception: At instance:EnterpriseManager0.lhrpc419.lhr.systemsltd.com Error:See base exception for details.
Base Exception:
oracle.ias.sysmgmt.exception.TaskException:OPMN process startup has timed out.
Resolution: Try starting the OPMN process using the command line utility "$ORACLE_HOME/OPMN/bin/OPMNctl start". If the OPMN process does not start check the log files in $ORACLE_HOME/OPMN/logs for more information.See base exception for details.
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
ons.log at "E:\oracle\product\10.1.0\em\opmn\logs" contains following
06/03/10 18:05:32 [4] ONS server initiated
06/03/10 18:05:47 [4] Logging disabled
06/03/10 18:05:49 [4] ONS server initiated
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [2] 0.0.24.56:6200 - listener BIND failed
06/03/10 18:05:49 [4] Listener thread 860: 192.168.0.70:6200 (0x401) terminating
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [1] Local listener terminated
can you guide that how to catter with this?
regardsAre you doing the Grid Control installation into a new Oracle Home? I would try a fresh installation...Typically, the installation itself is fairly straightforward..
-
10g R2 Grid Control Installation
Hi,
I want to go for 10g R2 Grid Control Installation...
I have setup like this
Software:
Oracle 10g R2 Grid Controller
Oracle 10g R3 patchset
Hardware:
Small PC with 2 GB RAM and 80 GB HDD
Target Nodes:
Oracle Applications Database Tier Node with 10g Database
Oracle Applications Tier Node
Oracle 9i Database standaalone
==========================
I want to install the 10gR2 Grid control on the SMALL PC on Linux...
I will Apply the Patchset 10g R3 on top it...
Then I want to install the OEM Grid Control Agent in Target Nodes...Where can I get this software...Please sched some light on thisHi,
Cannot we install 10gR2 Grid Control on Existing
Target Database Server in a seperate Oracle Home with
a seperate user for installation..It is adviceable to use the same oracle user in a different Oracle Home. -
Configuration Assistant failed during OEM 10g Grid control installation
Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha -
10g Grid Control Installation/configuration on RAC
Hi Experts,
I am new to RAC and I need your help.
I need to configure 2 node RAC and install/configure Oracle 10g Grid control (High Availability) on HP-UX Itanium servers. Is there any good document or link?
Thank You all in advance
BellHi Bell,
Here is the link for the 10gR5 Grid Control Installation Guide: http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm
Considering the GC repository is a RAC database you will be performing the "+Using an Existing Database+" installation type.
I would highlight the below part of the documentation:
To view a list of certified Oracle Database, see Document ID 412431.1 on My Oracle Support (formerly Metalink).
If you want to use a RAC database, which is configured on a virtual host, as the existing database, then refer to Document ID 561441.1 on My Oracle Support (formerly Metalink).
HTH,
Regards,
Jozsef
Edited by: Jozsef on Oct 22, 2010 12:14 AM -
10g Grid Control Installation/Configuration
I want to install and configure the 10g grid control agent in our environment.
Is there any step by step document for installation and configuration.[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha -
The Grid control installer has inside an Oracle Server ?
Hi
The Grid control installer has inside an Oracle Server to create the Repository Database or I have to install and Oracle Server before ?
ThanksI have installed both Grid Control and with GC 11g and WebLogic Server and I don't recall creating the respository before the install.
You will have to choose which install you are going to use. Grid Control 11g requires WebLogic Server install.
Grid Control 11g >>> http://download.oracle.com/docs/cd/E11857_01/index.htm
Grid Control 10g >>> http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm
KDSDBA
OCP -
10g grid control installation (hanging problem) on RHEL AS 4.0
Iam trying to install enterprise manager 10g(10.2.0.1.0) grid control on RHEL AS 4.0. At a stage after specifying security options the OUI hangs for long time (for about 15 mins) then it works fine till 100% installation then hanged for all day which i nevar see - (execute configuration scripts step). After a huge frustration i stopped the installation. Did anyone has come across this kind of problem..can anyone help me out of this problem...thanks in advance..
The last few lines from logfile shows:
*** End of Installation Page***
The installation of Oracle Enterprise Manager Repository Database was successful.
INFO: Path To 'globalcontext.xml' = /u01/app/oracle/product/10.2.0/db10g/install/chainedInstall/globalcontextPlease paste the install action log and config log
-
Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0
I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
Thanks
RajActually, entirely the other way around, unless you like seeing errors in your OMS.
OMS must be at at least the same patch level as the communicating agents.
10.1.0.3 agent against a 10.1.0.4 OMS = OK
10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink. -
Oracle 11g R2 Grid Control Installation on AIX 6
hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & Regardsuser13672598 wrote:
hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & RegardsHi
Grid Control is only available in 11GR1.
I have an installation walkthrough on my Blog. It is on http://managingoracle.blogspot.com in the section September 2010
There are more related Blog entries also.
Success!!
FJFranken
Edit: P.S. Welcome to this Forum
Edited by: fjfranken on 11-jan-2011 6:18 -
Grid Control installation for 11G: is 10g grid required ?
Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.user6116850 wrote:
Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.Upgrade Grid Control to 10.2.0.5. Grid Control is an independent product and will not follow the same numbering as Database and App Server/Fusion.
It will provide a lot of extra pages and tabs anyway. And it will format and present the information for Oracle 11g properly to work in it's pages.
Try it and see.
and ask Grid Control questions in the Grid Control forum for better Grid Control answers. -
Grid Control Installation problems
Hi,
i'm installing grid control on existing 10.2.0.4 but i have some issues.
I have the oracle home in c:\oracle\product\10.2.0\db_1 and OMS HOME in c:\OracleHomes\oms10g
i followed the steps to install Grid Control Using existing database but when i run the script ConfigureGC.pl, this message appears:
10204 OMS Configuration failed with errors.
The log configActions<date>.log says:
The action patchsetConfiguration is performing
The plug-in Repository Upgrade is running
Error occured while connecting to Repository
The plug-in Repository Upgrade has failed its perform method
The action patchsetConfiguration has failed its perform method
and in the CfmLogger i can read:
SEVERE: oracle.sysman.top.oms:Sanity Check Variable:SYS Password is not configured correctly.
INFO: oracle.sysman.top.oms:SQLException Exception occured
Null user or password not supported in THIN driver
INFO: oracle.sysman.top.oms:Exception occured while closing the database connection
null
SEVERE: oracle.sysman.top.oms:
Error occured while connecting to Repository ...
WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=
Error occured while connecting to Repository ...
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=patchsetConfiguration in step=1:microstep=0
INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:1:patchsetConfiguration in CfmAggregateInstance: oracle.sysman.top.oms:10.2.0.4.0:common:family=CFM:oh=C:\OracleHomes\oms10g:label=19} failed with an unhandled exception:
java.lang.Exception:
Error occured while connecting to Repository ...
at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:389)
at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:360)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
how can i solve?
RegardsHi,
may I ask why you are installing 10.2.0.4 version of Oracle Enterprise Manager. The reason for me asking is that we are currently on version 11g. If you are thinking of long time use of Enterprise Manager I would advise you to install the 11g version of the product as this will give you best support for your environment. If you decide to install 10.2 release my advise is to at least go for the 10.2.0.5 release.
Regards,
Frank -
OEM 11g Grid Control installation for 10g R2 database
Hi ,
I am new with oracle enterprise manager grid control ,
I have 3 questions ,
1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
I will really appreciate if someone can help me with these details , thank you.1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
Yes
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
Yes
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
You don't need any license to use OEM 11g, however you do need licenses to use Management Packs
Checkout:
Oracle® Enterprise Manager Licensing Information
11g Release 1 (11.1)
http://download.oracle.com/docs/cd/E11857_01/license.111/e11987/toc.htm
Regards
Rob
http://oemgc.wordpress.com -
Question about Grid Control Installation
Hello,
I have two instances of 12i VISION apps with rdbms database 11i running on two different linux systems. I wanted to install 11g grid control to get familiar with the utility.
Do I need to do the install on one of these linux machines or can I install it on a windows client?
I need some help please.
A/AHello,
I would suggest install grid control on separate server from rdbms, apps or even client machine
Cheers -
Grid Control installation hangs at 100%
I am trying to install GC for the first time. I am at "Install" screen at 100% and "Configuration Pending" ... hanging since yesterday. Except Help button all other are disabled (grayed out).
Idea?
Oracle Linux 4.8 x86Here is link to the picture.
[http://i890.photobucket.com/albums/ac106/mishomor/errors/100percent_error.jpg]
Last few lines of log as well.
INFO: cf session retrieved for key: db10g oracle.sysman.top.em_seed
INFO: Created a new file /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands
INFO: Since the option is to overwrite the existing /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands file, backing it up
INFO: The backed up file name is /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands.bak
INFO: ca page to be shown: false
INFO: exitonly tools to be excuted passed: 0
INFO:
*** End of Installation Page***
The installation of Oracle Enterprise Manager Repository Database was successful.
INFO: Path To 'globalcontext.xml' = /u01/oracle/OracleHomes/db10g/install/chainedInstall/globalcontext
Maybe you are looking for
-
Photosmart 4740 on 64-bit Windows 7: HP solution center can't find device
I have followed all recommendations in the help section. It shows on wireless network & prints w/o issue. Reinstalled all software. Made sure HP network devices support is started. Run all diagnostic utilities (no issues). Found this error when HP up
-
Firefox issue with website and feed updating
''Problems:'' I have been having this problem for a while. I provided links to pictures below. I have one website that sometimes displays properly, while other times, it does not. Also, I have trouble viewing an updated rss feed using firefox. Proble
-
Double Byte Characters for Japanese Kanji Language
Hello All, How can you identify the Double Byte characters and how we can check whether they are double byte characters or not. Can you please tell me the double byte characters from Japanese Kanji language for the characters. This is very urgent.I
-
Can't get flash working on firefox even though plugin is installed.
I am trying to get flash to work with Firefox on my mac OSX 10.6.8 VM. I had an old version of flash and I just updated it. According to adobe's help page (http://helpx.adobe.com/flash-player.html), the most recent version *is* installed but the anim
-
Requirement Urgency in ME21 not showing up
Somehow the field - Requirement Urgency is not showing up in ME21 tcode after we executed our config steps (SPRO -> Materials Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document Level ). We did the same thing in ME21N and t