Grid control mass deploy to upgrade from 10.2.0.3 to 10.2.0.5

mass deploy seems to only allow fresh installs and then upgrdes from 10.1 to 10.2.
is there any way to do a mass deploy to upgrade from 10.2.0.3 to 10.2.0.5?
Edited by: user12055677 on Jun 13, 2011 8:44 AM

{forum:id=220} is the grid control forum
John

Similar Messages

Moving OEM grid control(10.1.0.5) from one linux server to another RHEL4

Hi ,
I'm trying to move grid control from one server to another as part of data centre move-OEM GC version is 10.1.0.5 running on RHEL 4.The IP's will get changed too ,What configuration files needs to be changed on Tthe hots server for OMS/repository as they are on same box,and also on the various hots/targets managed by agents.Please let me know iwhat all steps needs to done for this move(Any documents/links)
Thanks

user9097501 wrote:
Binaries will be copied over (O/S imaging) and data will be replicated using SRDF(SAN Replication) from source A and the database containing OMS/repository will be brought up on the target destination B in a new subnet.So my question is as what configuration files do i need to change once its on target server. Please any input will be appreciated.Hi ,
I hope your hostname will remain same... If it is like that then you dont have to make any changed anywhere...
You you need to make changes only on hosts files with new ip address on all target servers..
And if hostname is changed, then you will have to reinstall OMS..
Please read
How To Re-configure the OMS After Hostname/IP Address Change on the Remote Repository Database Machine [ID 736061.1]
Is it possible to Modify the EM 10g Grid Control OMS Hostname After the Installation? [ID 371865.1]
Also GRID 10.1.0.5 is unsupported and it contains lot of BUGS so i would suggest you to upgrade it to 10.2.0.5*
Regards
Rajesh

Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
Taj

Hi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

Got warnning in Grid control agent deployment

I met the the error message '
PROBLEM : The host name in /etc/hosts is not proper.
WARNING : Check complete. The overall result of this check is: Failed <<<<
RECOMMENDATION : Please verify the hostname is /etc/hosts and the start the installation. '
while I deploy Grid Control agent.
My /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.0.191 ms191.ranfone.com ms191
192.168.0.153 main
ms191 is my OMS SERVER host. main is the target that I want to deploy agent.
I know the hosts should be configured like this .
ip hostname.domain host
however I don't have a domain name . is it neccessary?
Thanks for your kind help.

I have modified my /etc/hosts file and the problem is solved.
and I don't think the localhost.domain line should be commented.
if so, the listener can't start successfully.
anyway. thanks for you reply.
Edited by: user6748141 on 2009-10-19 上午12:18

OEM Grid Control 10g Deployment

Hi,
We are planning to deploy OEM Grid Control 10g (with Diagnostics and Performance Management packs) for management and monitoring of following targets:
Oracle Databases (9.2.x, 10.x) - 12
Oracle Application Servers 10g - 6
OEM documentation states that for smaller deployments (targets < 100); following h/w specs would be sufficient:
CPU: 1 (3GHz)
Memory: 4 GB (2GB for OMS, 2GB for OMR)
Disk Storage: 12 GB (2GB for OMS, 10GB for OMR)
I want to know:
i) Will that amount of disk storage will be sufficient?
ii) What would be the growth rate of OMR (Oracle Management Repository)?
iii) What other factors should be considered?
All suggestions are welcome.
Regards,
Preet

Hi Preet,
We had a 200+ (now 700+) target install in a major Telco and at that time
the repository database size was just 25 GB. So 10 GB for the database
itself should be ok. However sounds like you are crunched for space.
Bear in mind you need space for the installation of the EM10g OMS home,
the Agent Home and the Database home. So I dont think 12 GB is enough
for you. Try it out in test.
Regards,
Porus.

Is grid control 12c certified from Oracle?

From oracle reading, Grid Control 11g will be upgraded to Cloud Control 12c. But is Cloud Control 12c Oracle certified?
On metalink, certification tab, I can find Grid control 11g certification, but cannot find 12c certification, there are misc messages on that Enterprise Manager group.
Can someone shed some lights? I will really appreciate it.
Thanks
S.

For 12c forget Grid Control and use the term Cloud Control. How do you know Enterprise Manager Base Platform - OMS is Cloud Control? Good question... it just is.
If you enter Enterprise Manager Base Platform - OMS, Release:12.1.0.2.0, Linux x86-64 Oracle Linux
And follow the link:Certification Details for Notes and Support information you will see "Enterprise Manager Base Platform - OMS 12.1.0.2.0 is certified on Linux x86-64 Oracle Linux 6"
Eric

Grid Control Support for Tripwire

Does Oracle EM GridControl support Tripwire?
Do we need a seperate licence from oracle and how to configure Grid control to support Tripwire?
Any refrence link is much appreciated..

this is what i have now.
i have a system with grid control and database server
as version 10.1.0
now i am installing in a new system oracle database
server version 10.2.0. and i want to link this 10.2.0
with the existing grid control. will this work?Yes. Just discover your new 10..2.0 database using the 10.1.0 Grid Control.
>
will it be a good idea to upgrade the database server
and the grid control in the old system from 10.1.0
to 10.2.0 version?
Good idea to read all the release notes and compatibility section that come with you version. It is not a good idea to guess (unless it is a small test system). On my test PC, I upgraded repository to 10.2.0.1.0 and left Grid Control as 10.1.0.3. It works fine.

Step by Step video guide on Installing Oracle Grid Control

Dear all
I'd like to share my new video tutorial on "Installing Oracle 10gR2 Grid Control and deploying agents" using three different virtual machines. You can watch this tutorial from the following link:
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10gr2-grid-control-and-deploying-agent/
Thanks
Kamran Agayev A.

Hi,
If you want to use EM 11g Grid Control on 64-bit Linux, you should install version 11.1.0.1.0, which is available from here:
http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html
Note that the latest version of EM is 12c; however, if you still want to go with EM 11g, the following Support note documents the installation steps and has references to other helpful notes:
Step by Step Installation of Enterprise Manager Grid Control 11.1.0.1 (Doc ID 1059516.1)
By the way, the Concepts guide below has information about the EM 11g components including the OMS and agent:
http://docs.oracle.com/cd/E11857_01/em.111/e11982/overview.htm#CEGBFJIC
Regards,
- Loc

How To Install/Configure OEM Grid Control On Windows

Hi,
I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
This .zip files has 3 more .zip files eg
File Size
3822442.zip 510 MB (535,208,588 bytes)
3731596.zip 275 KB (282,502 bytes)
3731593.zip 510 MB (535,047,905 bytes)
Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
Pls email me at [email protected]
Your help greatly appretiated.
Regards,

You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
cheers
Rob

Grid Control 11g Agent: The free port availability check has failed.

I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
Amos

814475 wrote:
I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
AmosYEP, overhere the same problem.
Can't figure out yet what the problem exactly is.
In our case I deinstalled a working 10.2.0.4 agent ( same port same config ) and tried to install 11g Agent.
It fails with the above message. We however are on AIX, and that hasn't a 'netstat -p' option to find occupied ports easily.
Because the database is question needs to be monitored constantly I now reinstalled the 10.2.0.4 agent again and works seemlessly
Still unsolved.....
FJFranken

Grid Control emails

Hi there,
I need to be able to send emails from Grid Control, depending on different things that may be happening.
Right now, emails from grid control can only be sent from one email address. Then it is not possible to differenciate what is a critical alert and what is not.
What are my other options or can I choose more than 1 email address?
Thanks for your time in advance!

user13286861 wrote:
Hi there,
I need to be able to send emails from Grid Control, depending on different things that may be happening.
Right now, emails from grid control can only be sent from one email address. Then it is not possible to differenciate what is a critical alert and what is not.
What are my other options or can I choose more than 1 email address?
Thanks for your time in advance!You can't send emails from more than one address in GC, at least not that I've been able to discern. However, the subject line will contain the word "Critical" for critical events. You can set up email filters to handle critical alerts differently than Warning alerts.
Cheers,
Brian

Steps to install Oracle grid control 10g on windows

dears ,
kindly I need to install oracle grid control 10g release 5 on windows
so please if any one have a detailed step-by-step document for that post it to me ASAP
Regards.

Hi;
Please check below link
Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
Regard
Helios

Listener & grid control after upgrade to 11.1.0.7

going from 10.2.0.2 to 11.1.0.7 on aix 5.3
On our test server we have about 8 databases that are all currently using the 10.2 listener. I've upgraded one of our very basic test databases to 11g this morning, and for the time being just created a new listener11g that listens to different port. when I start it, the log file is being created in ORACLE_BASE/diag/tnslsnr/<server>/<lsnrname>/alert/ instead of the default ORACLE_HOME/network/logs I didn't tell it to create the listener log there, anyone else have this issue?
Also, my databases are all currently being monitored by OEM Grid Control and NOT DB Control. What steps should I take to get that running correctly again after the upgrade? Delete the target database and add it back after the upgrade? Sorry ahead of time if there is a meta-link doc for this, I've searched briefly and came up empty handed.
Thanks,
Ben Alvey

well, from what I read about the ADR architecture it wasn't clear that the listener log would move. the metalink documents for the listener log still state that the default log directory is ORACLE_HOME/network/log as well.
And seeing how I supplied a different value for diagnostic_dest during the upgrade of said database it didn't make much sense to me how it came to the decision to stick it where it did. I'd say it is using the value from $ORACLE_BASE during the install.
It would be helpful if their docs didn't contradict themselves constantly.

Upgrading Management Agents after upgrading the Grid Control to 10.2..0.5

Hello:
I am pretty new to implementing Grid control. I have been assigned the task of upgrading the Grid control to 10.2.0.5. I successfully upgraded the GC to 10.2.0.5. Now the next task is to upgrade the Agents running on other Database nodes. I have 6 databases running on Solaris 9.0 , few of them running on RHEL 5.0 x86, a few of them on RHEL 5.0 86*64. I am looking to upgrade these agents in one shot. Is there any way I can accomplish this from Grid control. If it is the case, then do I have to download and upload the patchsets for 10.2.0.5 for various platforms into the Grid Control.
I would be very happy if you could give me valid pointers which would help me to understand and move further.
Regards,
Bala

Yes you can upgrade the agent at one shot.Refer the following OBE
http://www.oracle.com/technology/obe/obe10gemgc_10204/agentpatch_upgrade.htm

How to upgrade grid control10gR2 (10.2.0.2) to grid control 10gR4(10.2.0.4)

Hi
can anybody tell me how can i upgrade my 10gR2(10.2.0.2 for windows) grid control to 10gR4
i have already downloaded the 10gR4 from OTN but whn i try to install it contain only patches so i m confused whelther my grid contol is upgraded or not..
and i m also not able to add siebel enterprise n siebel server in my grid control
pls help me..

10.2.0.4 is released as a patch.
One way to find out the EM version that you are running is go to the Grid Home Page, which is the page that you get when you onto Enterprise Manager Grid Control, and click the About Oracle Enterprise Manager link at the bottom the page.

Grid control mass deploy to upgrade from 10.2.0.3 to 10.2.0.5

Similar Messages

Maybe you are looking for