Grid Control reliance on Flash

Folks,
Currently investigating whether it is possible to get full functionality from grid control 11g without Adobe Flash and plugin being installed. Reason for request is security concerns about enabling flash internally here. If not possible is there a list of functionality which does/does not use flash?
Thanks
Mark

It will not work properly without FLASH ..
You cannot use features like performance TAB , and also you can not see the charts properly.
In nutshell , it is mandatory to have adobe for proper functioning .
Regards
Rajesh

Similar Messages

How to delete archive log files from ASM through Grid Control

Hi
Anybody suggest me how to delete archive log files from ASM through Grid Control.
Thanks

It is important to specify both, the oracle version and os version when posting, so confusions can be avoided.
In this particular case, since you are referring to asm and grid control you could be talking about either 10gR1, 10gR2 or 11gR1; but I strongly suggest you to avoid us to be guessing. In either case, you sould go to the maintenance tab of the target database and program a scheduled 'delete noprompt obsolete;' procedure. This will purge the information stored at the Flash recovery area, which I assume you have declared inside the ASM.
~ Madrid
http://hrivera99.blogspot.com/

Backing up database and archivelogs with grid control.

So I was scheduling a job to backup the entire database and archive logs to an ASM diskgroup. Well for some reason.... the backup of both the datafiles and archivelog files keep going to my $ORACLE_HOME/db/dbs directory. I have no clue as I've dropped the job and recreated it and made sure it was going to <diskgroup>. Anyone have any idea what might be happening? I'm using 10.2.0.4 for the database and ASM. My Grid control is also 10.2.0.4.
Thanks in advance
Luke

Grid Control:
Disk Backup Location: I've tried to leave it blank so that it will goto my flash recovery area(Which is on ASM) and I even tried to explicitly state an ASM diskgroup, but both of those fail and start backing up to /dbs directory
RMAN:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 3 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTRONLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F';
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 4;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '%U';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128;
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/SOMEDIR/';
Edited by: Luke22 on Feb 2, 2010 12:07 PM

Great leap backwards in Grid Control functionality.

Unfortunately I find myself using a newer version of Grid Control / OEM that REQUIRES use of the Flash plugin. You don't have a choice. So I use Flash reluctantly, the graphs appear, functionality appears just fine until I right click on the legend of a performance graph to try to drill down using "open in new tab" and instead I get the previously-mentioned little menu about "print/whatever/about Flash player".
What an annoying leap backwards in functionality. You can't leave the existing window open and open a new tab or window, instead you're allowed to replace the current screen with the drilldown screen. And then after drilldown, at the top of the new screen where hopefully there would be an HTML link that would allow me to at least try to open the previous window ( Top Activity ), there is no such link.
What a foolish choice to require the use of Flash. What an annoying downgrade of functionality. Now I can smoothly drag a gray box back and forth on the screen to highlight the time slice I'm interested in, but I can't do the things I really would like to do like drilldown while retaining the original window, save a single graph to a graphics file to attach to a mail message, etc.
I used to be able to save performance graphs and include them as attachments in email. Now instead with Flash I can "print" them to a file - unfortunately a) it's gray scale not color and b) it only shows the left half of the graph and c) it saves all of the graphs on the page when usually I'm only interested in one graph.
Guess I got spoiled by not having to use flash. I wonder how long we'll have to wait for Flash to include startling new right-click functionality like being able to print a single graph or have links on the plugins behave like actual URLs - instead of giving us a Print/Settings/About Flash 9 menu . Settings menu actually includes the remarkable privacy settings menu with which you can allow the remote computer to access your camera and microphone, or the Local Storage menu where you get to specify how much information the grid control server can store on your computer. I have been waiting for those functions with bated breath, after all who needs to open another window with useful data when it's possible to provide someone on a remote computer to access your computer's accessories.

I have modified my /etc/hosts file and the problem is solved.
and I don't think the localhost.domain line should be commented.
if so, the listener can't start successfully.
anyway. thanks for you reply.
Edited by: user6748141 on 2009-10-19 上午12:18

Grid Control 11g

Hi,
I am installing Oracle Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) New!
for Microsoft Windows (32-bit)
Can this be installed on a windows 2008R2 64 bit?
The doc does say:
Do NOT try to try install a 32-bit software on a 64-bit platform or vice versa; the installation may proceed, but will fail eventually. Therefore, ensure that you use the right software download for the right platform.
So I prefer to start on a 32 bit platform such as windows 2003 32 bit.
Regards,
Peter

Hi Peter,
No this can be installed only of 32 bit.
Reference to the certification Matrix:
=====================
Log in to My Oracle Support:
https://support.oracle.com/CSP/ui/flash.html
Click the Certifications tab --> Search ---> Select Enterprise Manager ---> select the version
Best Regards,
Venkat

How to install OEM Grid Control R2 on RHEL AS4 (AMD64/EM64T)

Hi all,
I was able to install the Oracle Application Server (Infrastructure and BI and Forms) successfully on the another machine with the same specs. The application I installed on the 64-bit machine is a 32-bit Oracle Application Server.
Now, I tried to install the OEM Grid Control R2 (another 32-bit Oracle Software) on an identical 64-bit machine but had no luck. Ran linux32 bash before trying the install.
I always get the error "error in invoking target 'dm_on ioracle' of makefile 'OH/db10g/rdbms/lib/ins_rdbms.mk".
Please help me/guide me in this install if it is at all possible.
Thanks and regards,
Mike

Did you read the installation docs?
Did you look up trying to do this on metalink before proceeding?

10g grid control installation (hanging problem) on RHEL AS 4.0

Iam trying to install enterprise manager 10g(10.2.0.1.0) grid control on RHEL AS 4.0. At a stage after specifying security options the OUI hangs for long time (for about 15 mins) then it works fine till 100% installation then hanged for all day which i nevar see - (execute configuration scripts step). After a huge frustration i stopped the installation. Did anyone has come across this kind of problem..can anyone help me out of this problem...thanks in advance..
The last few lines from logfile shows:
*** End of Installation Page***
The installation of Oracle Enterprise Manager Repository Database was successful.
INFO: Path To 'globalcontext.xml' = /u01/app/oracle/product/10.2.0/db10g/install/chainedInstall/globalcontext

Please paste the install action log and config log

Grid Control 11g Installation Unable to find Weblogic Server

Hi,
I am trying to install Grid Control 11g on Rhel 5.3. I already installed Weblogic . But when I give this location as middleware. Grid doesnt accept it.
This is the exact error: ORACLE_MIDDLEWARE_HOME_LOCATION: specified Oracle Middleware Home is not installed in this host.
I am giving /opt/oracle/Middleware in the Middleware home location screen.
[oracle@ Middleware]$ pwd
/opt/oracle/Middleware
[oracle@]$ ls -l
total 108
drwxr-xr-x 2 oracle dba 4096 Dec 15 22:45 logs
drwxr-xr-x 7 oracle dba 24576 Dec 15 22:45 modules
-rw-r--r-- 1 oracle dba 852 Dec 15 22:45 ocm.rsp
drwxr-xr-x 5 oracle dba 4096 Dec 15 22:50 patch_wls1032
-rw-r--r-- 1 oracle dba 56812 Dec 15 22:45 registry.dat
-rw-r--r-- 1 oracle dba 1718 Dec 15 22:45 registry.xml
drwxr-xr-x 8 oracle dba 4096 Dec 15 22:45 utils
drwxr-xr-x 7 oracle dba 4096 Dec 15 22:45 wlserver_10.3

Did you install the correct version of WebLogic?
Check you HOSTS file for incorrect entries.
Eric

Weblogic 10.3.2 Smart Update / Grid Control 11.1.1

I'm implementing a new Grid 11.1 environment on a linux x86_64 platform. I've installed everything including weblogic 10.3.2 with the default options. (required for grid control installation). The problem is.... now I have to patch the 10.3.2 weblogic server.. BUT it doesn't have the smart update utility installed... in other words .. there isn't any BEA_HOME/utils directory. Much less a bsu.sh script to launch the patching process.
Has anyone ran into this before? I am new to weblogic and have never used the product. Thanks

Somehow the installation got split. Part when in the /u01 and the other went in the home path of the user. never had that to happen before. I ended up uninstalling and reinstalling to correct the issue. Thanks

Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0

I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
Thanks
Raj

Actually, entirely the other way around, unless you like seeing errors in your OMS.
OMS must be at at least the same patch level as the communicating agents.
10.1.0.3 agent against a 10.1.0.4 OMS = OK
10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink.

Installing Oracle 10g Grid Control on Winxp

Hi All,
I am facing a problem while installing Grid controls on Winxp. The installation completes everytime but it just hangs when configuring componenet Java Security.
Do you have any idea how can I get rid of this. I tried running using configtools from command prompt but it seems the same problem, it hangs...I am trying first time on Windows system but its never install....
Thanks
Namit Sehgal

Don't you get some details on the screen as to what exactly is being run? If not check the logs and post the error here.

Want Access Data Grid control in SharePoint 2013?

Hello everyone!
Recently we noticed something funny in SharePoint 2013. While quite many people were hoping to have the datasheet view like those in SP2007 and 2010, Microsoft has chosen a different interface to display datasheet view.
Now, if you try to create a sub site under a publishing site, and use the
Publishing Site template then try to create a datasheet view in the sub site, SharePoint will try to use the Access data grid control to display the view. In some situations the view will display and other situations it will not, and will show this
error:
The list is displayed in Standard view. It cannot be displayed in Datasheet view for one or more of the following reasons: A datasheet component compatible with Microsoft SharePoint Foundation is not installed, your browser does not support ActiveX controls,
a component is not properly configured for 32-bit or 64-bit support, or support for ActiveX controls is disabled.
If you create a sub site using Publishing Site with Workflow instead, then the datasheet view will be created properly using SP2013 interface.
Using PowerShell, we can see that both Publishing Portal and
Publishing Site With Workflow are using the BLANKINTERNET 53 template. The
Publishing Site on the other hand is using the CMSPUBLISHING 39 template.
Want to try it out and let me know if that happens to your SharePoint too?

Hi Conway,
I tested the issue in my environment per your description and it returned the results as below:
I created a subsite using Publishing site under a team site in SharePoint server 2013, the datasheet view in a list displayed as pic1
I reproduced the issue in SharePoint server 2010, the datasheet view in a list displayed as pic2
It turns out by design the datasheet view in the subsite based on Publishing site template displays as your situation. Here is an article which explains this:
http://www.sharepointblues.com/2010/03/31/data-sheet-view-not-working/
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

ALV Grid Control - Modifiy data in total and subtotal lines

Hello all,
I´am creating a report using ALV Grid Control. This report calculates (using delivered and returned materials) for each vendor/material-combination the return quote.
Using the totals and subtotals function for different characteristics I want to calculate the return quote for the selected characteristic. Example:
Material delivered returned quote
..4711 . . . 500 . . . 5 . . . . 1 (=returned*100/delivered)
..4711 . . . 400 . . . 10 . . . . 2,5
. SUM . . . 900 . . . 15 . . . . 3,5 <-- 3,5 is the sum but I want display the calculated value 1,667
Is there a possibility to modify data in the total and subtotal lines.
Thank you for your answer
Best regards
Thomas

you said instead of 3.5 you want to show 1,667 ..
how is it possible...
3,5 become 1,667
i thought you are doing any conversions...
vijay

Grid Control performance tab not available when on the target home of ASM

I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

Color change of a field in ALV Grid Control

Hi,
One small help needed....
My req is explained below:
I have 3 fields empno, ename and deptno. and the records of these fields would be displayed in ALV grid control.
When I hover the mouse on ename field, the color of the complete field should change to other color, say "RED".
How do I get this. Are there any Mouse events in SAP?
Kalyan

Hi,
Once i changed the color of a field in a alv (not grid alv), i suspose that the same in alv grid. Also i used an mouse event.
To manage the color:
TYPE-POOLS : SLIS, and check this type: SLIS_T_SPECIALCOL_ALV.
when you call the function to display the alv, there is a parameter in which you should pass an internal table that references the type SLIS_T_SPECIALCOL_ALV.
To manage the mouse:
1.- You should add the event user command:
for example:
DATA: I_EVENT TYPE SLIS_ALV_EVENT.
Llamo al la función que obtiene los eventos validos para el ALV
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE     = 0
       IMPORTING
            ET_EVENTS       = P_EVENTS
       EXCEPTIONS
            LIST_TYPE_WRONG = 1
            OTHERS          = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
agrega evento user command
    READ TABLE P_EVENTS INTO I_EVENT
      WITH KEY NAME = SLIS_EV_USER_COMMAND.
    IF SY-SUBRC EQ 0.
      I_EVENT-FORM = SLIS_EV_USER_COMMAND.
      MODIFY P_EVENTS FROM I_EVENT INDEX SY-TABIX.
    ENDIF.
ENDIF.
2.- you work with the user command event:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                        RS_SELFIELD TYPE SLIS_SELFIELD .
CASE R_UCOMM.
    WHEN C_DOBLE_CLICK.
    here you do the things that you need when the mouse *     bottom it's pressed
      PERFORM xxxxxxx.
ENDCASE.
ENDFORM.
3.- you can change the form of the mouse, but i don't remember exactly how to do that... try to check that, it's helpfull in order to display the fields that can execute a funtion in your alv.
I hope this help you, and sorry for my english.
Albio.-

Grid Control reliance on Flash

Similar Messages

Maybe you are looking for